Used Apollo 1200-300-A1/A4-3T for sale (19,630)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 563048-200, Equipment: type plate available, Spiral conveyor by Apollo for elevating products Dodpfx Aioy Nzpxjwjut

Condition: good (used), Year of construction: 2016, Apollo spiral conveyor, infeed at approx. 6.42m / outfeed at approx. 1.09m, approx. 40cm wide conveying path – used –: Price ex location (net): only €5,950 – dismantled, packed and loaded! Manufacturer: Apollo Model: SPC 1500-400-A4-6T Year of manufacture: 2016 Belt width: approx. 40cm Infeed height (top): approx. 6.42m Outfeed height (bottom): approx. 1.09m Spiral diameter: approx. 2m Kettenlänge (chain length): 37.5m Serial no.: 562044-100 230/400V / 50 Hz, 2.2 kW Speed (min): 40m/min IP54 Load capacity: 6.4kg/m Condition: good – very good Duodpfx Aijyhxp Aewet Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Used steel stacking rack 1550x1200x300 mm, suitable for stanchions 60. 3 mm. Dsdpfxoy Hpzqj Aiwsut A steel stacking rack is the solution for those seeking maximum flexibility and efficiency in warehouse storage. Designed for efficient and safe storage of one europallet. The robust construction of hot-dip galvanized steel makes the rack

Condition: used, This hot-dip galvanized stacking rack is a durable and flexible solution for the efficient storage and stacking of goods on block pallets. Dodsy Hpvhopfx Aiweut Thanks to the robust steel construction and corrosion-resistant finish, this stacking rack is ideally suited for intensive use in warehouses, logistics environments, and outdoor

Condition: used, This batch offer of 7 painted stacking racks in blue/purple provides an efficient and cost-effective solution for storing and stacking goods on block pallets. Ideal for warehouses, logistics environments, and internal storage where flexibility and overview are key. Dusdpfx Ajy Hpv Usiwst By choosing a set of 7 units, a scalable and organized storage setup

Condition: used, Year of construction: 1996, Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Dsdpfx Aijk Abgcsweut Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Control cabinet, distribution cabinet, control cabinet, TS modular cabinet Dodpofdb Ulofx Aiwsut -Dimensions: W800/H1200/D300 mm -Braids: several -Weight: 62 kg

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm Duedpfx Aioh Auahewet 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: new, Year of construction: 2025, For crushing marble, sandstone, and quartzite, various types of crushers can be used depending on the properties of the raw materials and the desired final product specifications. Here are some common types of crushers that may be suitable for processing these materials: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing. They are robust machines that handle tough materials, making them suitable for breaking down hard and abrasive stones like marble and quartzite. 2. Impact Crusher: Dusdpfxjq Nx Nne Aiwet - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder stones and can produce well-shaped and fine-grained aggregates. 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials like sandstone. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Crawler Mobile Crusher: - Mobile crushers offer flexibility and mobility, allowing them to be used directly at the quarry or job site. Crawler mobile crushers can handle various types of stones, including marble, sandstone, and quartzite. 9. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 10. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. When selecting a crusher for marble, sandstone, or quartzite, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: ready for operation (used), Indramat KDA 1.1-100-300-W1-220 AC. Mainspindle Drive, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Dedpji Ebgyjfx Aiweut

Condition: new, Year of construction: 2026, neu 2026 070217 Juni 2026, Zwischenverkau Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg Dusdpowirz Sefx Aiwet motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: new, Year of construction: 2026, neu 2026 070155 prompt, Zwischenverkauf v Türkei 6900 € 133.17 € 1 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm Duodewirmuopfx Aiwot

Condition: new, Year of construction: 2020, operating hours: 45 h, load capacity: 1,300 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,140 mm, Manufacturer + model: HUBTEX / GENKINGER EGP 13/44 So Mast: 3F4500 ID: 24053.0388 Category: New Mast: 3F4500 Forks: 1200/2000 mm Lowered height: 2140 mm Lifting height: 4500 mm Capacity: 1300 kg Year: 2020 Operating hours: 45 hours Battery capacity: 24 V / 345 Ah Options: VERY unique SPECIAL wide-track design!!! - LIFTING CAPACITY 1300 KG @ 1200 mm - Equipped with spreader!! - VETTER click forks 1200 -> 2000 mm!! - Proportional lift & lower valves - With cantilevered forks - SUITABLE for all types of pallets - Width between support legs: 1340 MM!! Dujdey Ir U Aepfx Aiwet Power steering, condition LIKE NEW!!

Condition: ready for operation (used), Year of construction: 2011, clamping force: 11,772 kN, screw diameter: 130 mm, injection weight: 6,210 g, overall weight: 70,000 kg, Hydraulic injection moulding machine manufactured in 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It has a shot volume of 8630 cm³ and a maximum injection pressure of 1460 bar. If you are looking to get high-quality injection moulding capabilities, consider the ITALTECH KS 1200 8300 ES machine we have for sale. Contact us for further details. Injection Unit • Injection unit size: 8300 • L/D ratio: 20 • Shot volume (theoretical): 8,630 cm³ Dsdpfxjy Dua Tj Aiweut • Max injection pressure: 1,460 bar • Injection flow rate: 1,200 cm³/s • Screw speed: up to 110 rpm • Screw torque: 8,400 Nm • Plasticizing capacity (HDPE): 140 g/s • Heating capacity: 79 kW • Temperature control zones: 5 + 1Clamping Unit • Clamping force: 11,772 kN (~1,200 t) • Opening force: 300 kN • Opening stroke with minimum mould height: 2000 mm • Opening stroke with maximum mould height: 1400 mm • Mould height: 600–1,200 mm • Max daylight: 2,600 mmPlaten & Ejector • Platen size (W x H): 1,900 x 1,770 mm • Distance between tie bars (W x H): 1,250 x 1,120 mm • Tie bar diameter: 220 mm • Ejector force: 226 kN • Ejector stroke: 300 mmPower & Consumption • Pump motor power: 180 kW • Installed power: 265 kW • Oil tank capacity: 1,800 LPerformance • Dry cycle: 10 s

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Dodpfxorixi Ns Aiwout Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Dodexwy Utopfx Aiwout

Condition: new, functionality: fully functional, empty load weight: 265 kg, maximum load weight: 1,035 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 2,950 mm, loading space width: 1,630 mm, Year of construction: 2026, MARTZ Unilader 300 C 1.3T NEW VEHICLE Internal dimensions: 295 cm x 263 cm Gross vehicle weight: 1,300 kg Payload: 1,035 kg Braked single-axle low-loader 1,300 kg KNOTT axle with inertia brake, automatic reverse function, and handbrake Bolted and galvanized steel frame Folding drawbar With hydraulic assistance 15 mm thick, robust, and anti-slip phenolic plywood flooring 13-pin electrical system Plastic mudguards Support wheel 13-inch M+S tires Multiple lashing points Front position lights Rear lights with reversing light, rear fog light, and triangular reflectors Folding license plate holder 2x wheel chocks Optional accessories: - 100 km/h upgrade - Rear support stands - 40 cm steel side panels - Extension side panels - Mesh sides - Drive-on rear ramp - Motorcycle wheel rail Dodsww Eg Ropfx Aiwout - Crank handle for infinitely adjustable tipping angle - Flat tarp with or without hoops - High tarp - Coarse or fine mesh net - Spare wheel with holder Further accessories available on request! Photos are for reference only and may show optional accessories at additional cost. Plus vehicle registration document and shipping to Gera €150 net Haven’t found the right trailer yet? We have 50-100 vehicles permanently in stock and immediately available for collection. Workshop open weekdays from 8:00 am - 5:00 pm for all types of repairs. Specialist for axle repairs, including caravan axles. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get professional advice by phone, visit our website, or drop by directly.

Condition: excellent (used), mileage: 564,445 km, power: 228 kW (309.99 HP), first registration: 04/2005, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro3, total length: 9,670 mm, total width: 2,550 mm, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,510 mm, Year of construction: 2005, Tail lift: dhollandia, 3000 kg WMAH10ZZ95M412583 = More information = Number of cylinders: 6 Engine capacity: 10.518 cc Empty weight: 9.620 kg Carrying capacity: 9.380 kg GVW: 19.000 kg APK (MOT): tested until 07/2026 Technical condition: very good Visual appearance: very good Registration number: BR-BR-04 = Dealer information = Dujdpoymq Abefx Aiwot Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Dodpowavqlefx Aiwout Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: excellent (used), Year of construction: 2011, We are selling 2 pieces of Alpha 1200 separators, year of manufacture 2011. New rotors installed. Duodpfelpafdox Aiwot

Condition: reconditioned (used), Year of construction: 2019, 2-column high-performance automatic bandsaw BERG & SCHMID SBS 300 VA-1/CNC Year of manufacture: 2019 Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting dimension flat: 300 mm x 260 mm Blade speed: 20 – 100 m/min Modern SNC 20 control Frequency-controlled saw drive Dusdpfx Asyw H Ensiwst Operator buttons with pictograms Driven chip brush Hydraulic blade tensioning Clamping pressure adjustment Work light Chip conveyor 2 m roller conveyor

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, hydraulic torque pump, torque wrench pump -Manufacturer: HAWE, hydraulic unit -Type: MP 24-H 1.77/B 5-A 1/300- -Motor: 0.55 kW / 1390 rpm / 380 V -Pressure: up to 310 bar -Flow rate: 1.73 l/min -Individual components: see photos -Dimensions: 325/160/H295 mm -Weight: 19 kg Duodoivqm Eopfx Aiwjt

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm Dedpob Sciaefx Aiwjut weight: 1350 kg

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1163109, Machine with metal and plastic brushes for sanding and creating rustic surfaces. Can be combined with a paint shop as an intermediate sanding stage after the first coat of paint. Duodpfjyyvpnex Aiwjt

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis 400 mm Y-axis 300 mm Z-axis 220 mm Djdpfxoyvtbys Aiwsut The machine is still in daily use; only the "automatic threading" function is not working.