Used Akuino Continuous Flow Pasteurizer for sale (8,584)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. Itsdpfx Aozg Dlbea Eji • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, Part size: 1,200 x 800 x 400 mm, comprising: 4 painting robots, paint dryer, heat medium natural gas, max. temperature 100°C, exhaust air volume flow 1,500 m³/h, circular conveyor system by Hero, batch of load carriers, control and switch cabinets, preparation and supply racks, platform system, stairway access, accessories. +++ Attention: Machine is part of an online auction! +++ Ijdpfx Aaex Ry Rds Ejti

Year of construction: 2026, condition: new, Continuous pasteurizer electric with preheating of the juice in the coaxial tube heat exchanger Isdpjuadm Dsfx Aa Esti They use available low-cost energy (e.g. from solar, heat pump, biogas, tec.) although the temperature level is not sufficient for pasteurization. The rest of the temperature increase to pasteurization level is done electrically (with less energy requirement). The components: Preheating: * Coaxial tubular heat exchanger (KRWT) with thermal insulation (max. 60kW) thermal * Mixing unit incl. circulation pump ensures a stable inlet temperature of the heating water Continuous pasteurizer electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW - 400 V * Tank (stainless steel) 150 ltr. with thermal insulation with stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Simple operation Total capacity up to 1100 liters per hour ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Itedpfx Aaet Uzits Eoi ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: like new (used), THE FUNCTION OF THE PASTEURIZER-COOLER IS TO PASTEURIZE THE PRODUCT DURING THE INITIAL PHASE OF THE PROCESS, AND THEN TO GRADUALLY COOL IT THROUGHOUT THE REMAINDER OF THE PROCESS. THE MACHINE INCLUDES: - 3 BASINS AND 3 CENTRIFUGAL PUMPS: Useful dimensions: - Basin 1: 2.44 m x 1.35 m x 0.53 m - Basin 2: 2.32 m x 1.35 m x 0.53 m - Basin 3: 2.32 m x 1.35 m x 0.53 m - Modular belt infeed conveyor: 5.20 m (length) - Modular belt outfeed conveyor: 4.35 m (length). Iodpfsx S Hpcex Aa Eeti

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Ijdpfx Ajyln D Tea Eoti

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Itsdpfx Aaovuafke Eoi

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Itjdpfownidhox Aa Eoi Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Ijdpfozimcbex Aa Eoti Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2008, operating hours: 17,410 h, functionality: fully functional, machine/vehicle number: 400149, pump pressure: 6,000 bar, power: 75 kW (101.97 HP), FLOW Waterjet Machine with INTEGRATED FLYING BRIDGE We are selling our Flow waterjet machine, including a stainless steel water tank, a 6000 bar pump, and sand/abrasive feeding system. The sand filter (wastewater treatment) is optional and not included in the price. The machine has been with us since 2008 and has not been in operation since July 2, 2026. The machine will be replaced by a new acquisition. The machine is disassembled and ready for transport. The machine is in very good condition. It is fully functional and can be inspected at any time. Manufacturer: Flow International Corporation, 1635 Jeffersonville, Indiana 47130, USA Year of manufacture: 02/2008 Model/Type: IFB INTEGRATED FLYING Bridge Serial No.: 400149 Transport dimensions: Overall height: 220 cm Overall width: 480 cm Overall length: 450 cm Iedpfxoza A Ayj Aa Eoti Tank size: Length: 425 cm Width: 255 cm Cutting area: Length: 365 cm Width: 182 cm Data sheets for the machine, pump, and software are available (PDF upon request). Inspection before purchase is possible and desirable. Delivery available upon request. Sold in its current condition, as shown in the pictures.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm Iodpfx Aajdki Rtj Eoti -Nominal pressure: PN40 -Number: 1x valves available -Price: per piece -Weight: 9.69 kg/piece

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Isdpfx Aszka Imea Eoti

Condition: used, functionality: fully functional, Offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD-60, 7,856 operating hours, 2 intensifiers, both operating simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD-60, 25,179 operating hours, 2 intensifiers, both operating simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48,000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55,000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Itjdpfozivhtjx Aa Eji Pumps are from a single original owner and are in good condition. The pumps have been completely overhauled by us and will be ready for operation in approximately 3 weeks. Prices available upon request.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 Itodpsxwtu Tofx Aa Eji 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Year of construction: 2010, condition: excellent (used), functionality: fully functional, the laminar flow cabinet was located in a cleanroom. Model Parameters BBS-H1300 BBS-H1800 External dimensions (W*D*H) 1300*820*2040 mm 1800*820*2070 mm Power supply AC 220V±10% AC 110V±10% Ijdpfx Aezia Idsa Esti Frequency 50 Hz 60Hz Power consumption 400W 500 W Airflow velocity 0.3～0.5m/s UV lamp power consumption 30W*1 30W*1 Fluorescent lamp power consumption 12W (LED)*1 16W (LED)*2 HEPA filter 99.999% efficiency at 0.3 µm Noise ≤65dB

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Isdpsy D A Ifefx Aa Ejti Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Itedpfx Ajzhkmusa Eoi Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Iodpfxjzdty Nj Aa Ejti Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 2000E – 2880 m³/h – 230 V Extraction table, welding and grinding table with electric height adjustment The ISI Flow Desk 2000 E extraction table is a height-adjustable workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 2880 m³/h Work surface W/D in mm: W 1990 / D 824 Work height in mm: H 638-938 mm Table load: 200 kg/m (wood, with evenly distributed load) Work surface: Wood slats (optional steel, stainless steel, or plastic slats) Itsdpfxszdtwzo Aa Esi Overall dimensions W/D/H in mm: W 2000 / D 1100 / H 938 (optional L = 1000/1500 mm available) Fan power: without fan Operating voltage: 1 x 230 V, 50 Hz Pipe connection: D = 251 mm Color: RAL 7042 / RAL 7011 Weight: 191 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. The table is designed for both standing and seated work with full knee clearance, focusing on ergonomics. For even more efficient work, the extraction table offers a wide range of optional accessories: - Back wall, side walls, and ceiling – optionally with soundproofing and lighting - Slats made of wood, steel, stainless steel, or plastic - Perforated steel plate on top of wood slats - Vise holder - Holder for pipe welding - Spot extraction arm Your advantages of the ISI-Flow Desk series: - 12 device variants available - Piping can be connected on the right, left side, or on both sides - Electric height adjustment at the push of a button - Wide range of mounting and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Isdozdtqujpfx Aa Eeti Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Itsdpfxev T D D Uj Aa Eji Dimensions: 3360 mm x 1200 mm x 1900 mm. Price € 14,590

Condition: excellent (used), Year of construction: 2014, Ilapak Smart Flow Wrapper Zodiac coder Suitable for clear or printed film In everyday use Ijdpfxewttcxo Aa Ejti Adjustable infeed box In excellent condition Price € 14,590

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Itsdpfx Aaowd Sh Uo Eoi Reel dimensions: 520mm Jaws: 250mm x 150mm Up to 30 programmable products Price € 5,950

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. Isdpfsy D Uzqex Aa Esti This is an ex bakery machine, in good working condition Price € 5,900

Condition: good (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Electric adjustable mast height Mobile on castors Excellent condition Price € 8,900 Isdpfezcrlcox Aa Esti