Used Veb Ddr 50M³, 50000 Liter for sale (8,167)

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. Knedpezii A Refx Ahgsb The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Knedpfx Asziizgjhgjb Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Knjdpfxszh Huho Ahgeb Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VCS³ 7027-10 Vötsch Climate Test Chamber, Water-Cooled With a temperature change rate of 10 K/min Knjdpfxszh Huuj Ahgob Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 10 K/min Cooling: 14.5 K/min Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% relative humidity, regulated for max. 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% relative humidity Humidity range: 10% to 98% relative humidity (extended climate range: 2°C/95% relative humidity, regulated for max. 2 hours) External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters Side opening: 50 mm Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Nominal voltage: 3/N/PE AC 400 V ±10%, 50 Hz Nominal power: 14 kW Nominal current: 26 A Fuse, on customer’s side: 63 A, slow-blow Refrigerant: R404A/R-23 Weight: approx. 835 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, mileage: 1,032,111 km, power: 375 kW (509.86 HP), first registration: 09/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Data* Volvo FH 500 4x2 Tractor * First registration: 2016 * Engine: Volvo D13K500 Euro 6 * Power: 500 hp (375 kW) * Displacement: 12.8 l * Transmission: Volvo I-Shift 12-speed automatic * Air suspension on rear axle * Aluminum rims Dura-Bright polished ----Safety equipment* ACC Adaptive Cruise Control * Collision warning system with emergency braking function * Lane Keeping Assist * Lane Change Assist * Driver Alert System (fatigue detection) * ESP Electronic Stability Program * EBS Electronic Braking System Kjdpezq Nxnsfx Ahgenb * ABS * Immobilizer * Engine brake Volvo VEB+ ----Comfort* Globetrotter cab * 2 beds * Stationary air conditioning I-Park Cool * Cab heater * Automatic climate control * Comfortable driver's seat, air-suspended and heated * Comfortable passenger seat, rotating * Electric sunroof * Electric windows * Central locking with remote control * Cooler box under the bed * Writing board on the steering wheel * Additional storage compartments * Two flexible reading lamps ----Multimedia & Communication* Radio/CD/MP3 * Bluetooth hands-free system * Navigation * Telematic system * Dynafleet preparation * FMS interface * 8 speakers * USB and AUX connection * 9" touch color display ----Lights & Visibility* LED daytime running lights * LED fog lights * LED work lights on the rear of the cab * Reversing/work lights LED * Rotating beacon lights LED (orange) * Electrically adjustable and heated mirrors * Front mirror * Wide-angle mirror * Sun visor (external) ----Chassis & Technology* Air suspension on rear axle * Electronic level control * Differential lock * Disc brakes all around ----Aerodynamics* Roof spoiler * Side skirts on the cab * Bumper with spoiler lip ----* Tire dimension front axle: 385/55 R22.5 * Tire dimension rear axle: 315/70 R22.5 * Fuel tank: 610 liters * AdBlue tank: 100 liters * Technical gross vehicle weight: 19,200 kg * Tare weight: 7657 kg * Overall length: 5890 mm * Wheelbase: 3,700 mm * Next inspection due: 03.2026 ----Vehicle number/Vehicle: 12346----Errors and prior sale are reserved----Advertisements and various inscriptions have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. We can offer you the following services for an additional fee: ----Trade-in of your old vehicle TÜV/inspection acceptance Complete export handling Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----YOUR VTS TEAM

Condition: good (used), mileage: 298,774 km, power: 217 kW (295.04 HP), first registration: 09/1992, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, suspension: steel-air, number of seats: 2, Year of construction: 1992, Mercedes Benz 1722/Tanker/2258 Liters/Engine Damage • Manufacturer: Mercedes Benz • Model: 1722 • Mileage: 298,774 km • First registration: September 28, 1992 • Power: 160 kW / 217 hp • Wheel configuration: 4x2 • Engine: 6 cylinders • Engine damage: Engine seized due to overheating • Body: Esterer GmbH • 1 Tank: 2258 Liters • Roof rack • Trailer coupling Ksdozxr Hkspfx Ahgonb • Printer • Transmission: Manual transmission • Permissible total weight: 18,000 kg • German vehicle • German documents • Immediately ready for use • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos not excluded. • Sale subject to our general terms and conditions.

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Knodpfoy D Nyusx Ahgeb Type: Temperature Test Chamber Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change - Prior sale reserved - For further information, feel free to contact us.

Condition: excellent (used), ERICHSEN CORROCOMPACT 618-1000 Corrosion Testing System Manufacturer: ERICHSEN GmbH & Co. KG Type: CORROCOMPACT 618-1000 Year of Manufacture: 2017 Kodpfx Aezk A Ebohgonb Machine Type: Corrosion Testing System / Climate Change Testing System Test Chamber Volume: 1,000 liters For sale is a used ERICHSEN CORROCOMPACT 618-1000 corrosion testing system with a separate air conditioning unit and Siemens SIMATIC touch control. The system was developed for professional corrosion, climate change, salt spray, and condensation tests and is ideally suited for testing laboratories, the automotive industry, research institutions, and quality assurance. Technical Data: Model: 618-1000 Series: CORROCOMPACT 617 Serial Number: 16855/005 Test Chamber Volume: 1,000 liters Power Supply: 3+N+PE AC 400 V / 50 Hz Connected Load: 5 kVA + 9 kVA (air conditioning unit) Fuse Rating: 3 × 32 A Compressed Air Connection: 6–10 bar Deionized Water Connection: 3–6 bar Control: Siemens SIMATIC HMI Touch CPU Version: 2.2.3 HMI Version: 2.2.3 Air Conditioning Unit: Manufacturer: ERICHSEN Type: VS-Bo-1,1-40-L-S Year of Manufacture: 2014 Serial Number: 14-2430 Refrigerant: R507 Connected Load: 3.3 kW Max. Operating Current: 8.4 A Compressor Power: 1.3 kW Evaporator Fan: 0.18 kW Condenser Fan: 0.28 kW Steam Humidifier: 1.6 kW Heater: 5 × 0.2 kW Dimensions: External Dimensions (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Height with Hood Open: approx. 2,500 mm Internal Dimensions (W × D × H): approx. 1,190 × 815 × 1,040 mm Equipment: Siemens SIMATIC Touch Panel Separate Air Conditioning Unit 1,000-Liter Test Chamber Climate Change Testing Salt Spray Testing Condensation Testing Automatic Test Programs Compressed Air Connection Deionized Water Connection Salt Solution Connection Exhaust Connection Floor Drain Supported Test Standards: DIN EN ISO 11997-1 DIN EN ISO 6270-2 AT ISO 11503 ASTM D2247 VDA 621-415 B P-VW 1210 DIN EN ISO 9227 NSS VDA 233-102 DIN EN ISO 6270-2 AHT DIN EN ISO 9227 AASS DIN EN ISO 9227 CASS ASTM B117 D171058 DIN EN ISO 6270-2 CH DIN 50958 ISO 9227 BS 3900 Part F2 DIN 55991 Transport Data: Test Chamber (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Air Conditioning Unit (W × D × H): approx. 1,700 × 900 × 1,900 mm Weight of Test Chamber: approx. 600 kg Weight of Air Conditioning Unit: approx. 500 kg Total Weight: approx. 1,100 kg Condition: Used The system was last used in an industrial setting. Optical condition according to the pictures. Scope of Delivery: ERICHSEN CORROCOMPACT 618-1000 Air Conditioning Unit VS-Bo-1,1-40-L-S Siemens SIMATIC HMI Touch Accessories according to the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 2,000 mm, total height: 2,100 mm, total width: 1,300 mm, input voltage: 240 V, overall weight: 350 kg, pipe diameter (max.): 20 mm, product height (max.): 200 mm, product length (max.): 160 mm, product length (min.): 200 mm, Liquid filling machine for pouch bags, including a sealing unit. The machine produces four-sided pouches from flat film using welding. It is suitable for filling sauces, creams, salad dressings, and other liquids in the food, cosmetics, and non-food industries. Made in Hungary. Easy to adjust for various sizes, from 10 to 70 grams. Easy to clean and a reliable machine. Optionally, a 300-liter, 15 kW homogenizer can be connected. Knsdpfxszv E A Tj Ahgjb

Condition: used, functionality: fully functional, The manufacturer cannot be identified with 100% certainty as there is no nameplate on the entire machine. The machine is located in 06502 Thale. Knsdpszr Edpefx Ahgob Machine type: Drum melting system for 200-liter containers Material transport: Motor-driven pump Lifting system: Pneumatic Melting system: Heated pressure/melting plate with two rotating seals Control: Separate control cabinet A detailed description/documentation of the drum melting system can be found in the appendix.

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 670 mm, turning diameter: 490 mm, overall weight: 6,500 kg, FOR SALE: High-Quality CNC Lathe Biglia B 658 MB (Year of Manufacture 2004) with Driven Tools + KID 70 Bar Feeder Are you looking for a reliable and robust workhorse for metalworking? For sale is a Biglia B 658 MB CNC lathe in good and fully functional condition. The machine is equipped with driven tools, an automatic tailstock, a reliable Fanuc control, and includes an automatic bar feeder. The complete package is available ex stock. General Information Manufacturer: Biglia (Italy) Model: B 658 MB Year of manufacture: 2004 Knedszbx N Eepfx Ahgob CNC control: FANUC Series 18i-TB Condition: Good, fully functional Availability: Ex stock --- Key Technical Characteristics (Lathe) Maximum turning diameter: 380 mm Maximum turning length: 650 mm Maximum rod/bar diameter: 80 mm Maximum passage: 620 mm Spindle speed range: 30–3000 rpm Spindle drive power: 26/22 kW Spindle end: ASA 8″ Spindle bore diameter: 90 mm Diameter of the lathe chuck: 315 mm Bidirectional turret: 12 positions Turret indexing time (per position): 0.1 s Driven tool stations: 12 positions Max. speed of driven tool stations: 4000 rpm Max. torque of driven tool stations: 3.7 kW Feed in the X/Z/B axis: 220 / 650 / 660 mm Rapid traverse in the X/Z/B axis: 20 / 24 / 12 m/min Automatic tailstock maximum clamping force: 1080 Kg --- Round bar diameter: min. 5 mm (3/16") – max. 70 mm (2" 3/4) Square bar side: min. 5 mm (3/16") – max. 50 mm (2") Hexagonal bar height: min. 5 mm (3/16") – max. 60 mm (2 1/4") Maximum bar length options: 500 mm / 1615 mm Magazine capacity: 250 kg (e.g., approx. 60 bars of 10 mm) Bar change time: 50 sec (with a 1000 mm bar) Feed speed: 0–500 mm/sec Return speed: 1000 mm/sec Supply voltage: 230/400 Volt Control voltage: 24 Volt Installed power: 2 kW Weight: 580 kg Additional Equipment & Features KID 70 Bar feeder Measuring arm (Touch setter) Chip conveyor Collet chuck DIN 6343 Coolant tank capacity: 250 liters Coolant pump capacity: 150 l/min Coolant pump power: 0.73 kW Noise level: 74 dB(A) Physical Dimensions (Lathe) Dimensions (L x W x H): 4000 x 1900 x 1850 mm Weight of the Biglia B658/BM: approx. 6,000 kg Contact us today to request a quote for this complete production package! The machines are ready for immediate dispatch. > *(All information is given in good faith but we reserve the right to make errors)*

Condition: good (used), functionality: fully functional, used sourdough machine Isern Häger 600 RMS, for 1000 liters, in bakery condition (good condition), machine no. 06910004, 2.3 kW, 400 V, 50 Hz, weight 420 kg Kjdpfx Aowwwdhjhgjnb

Condition: used, Very little used Quickstep Anticorro stainless steel reactor. Vessel: - Manufacturer: Quickstep Anticorro - Total/working volume: approx 2897 / 1900 liters - Designed material: Stainless steel AISI 304 - Design type: Clamped dished and hinged top and welded dished bottom - Dimensions: approx 1706 mm diameter x 2471 mm height (3580 mm height with lid open) - Maximum pressure and temperature of the vessel: -1/1 bar at 0 to 100°C - Maximum pressure and temperature of jacket: -1/2,5 bar at 0 to 135°C - Mounted on stainless steel legs. Agitator: - Bottom entry frame agitator MIX Brno model 60 MP 30 - The agitator is designed for mixing creams, gels and ointments with a maximum weight of 1100 kg/m3, maximum viscosity 10000 cP at a temperature up to 100°C and maximum particle size 10 - 80 μm. - Drive through NORD gear drive 7.5 kW, 1460 rpm, 50 Hz - final rpms of the agitator at 50 Hz is 42 rpm. Specifications: Capacity: 1,900 L Type of stainless: AISI 304 Internal Pressure: -1 bar Knodpfxozunpto Ahgob Internal Temperature: 100°C Jacket Pressure: 2 bar Jacket Temperature: 135°C Legs/Lugs: Legs

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Autoclave ASCA TYPE = 215 E Completely made of stainless steel ADITEC control system 215 liter capacity 18 kW 2 full-size baskets Fully functional Shipping possible upon agreement. Kedpfxsz Ak Ubo Ahgsnb

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Kedpfxjzvu Eko Ahgenb Type K 36 Machine number K3999 Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Live demonstration possible Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm PRICE 250,000 NET

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total length: 2,330 mm, total width: 1,230 mm, total height: 1,740 mm, power: 1.5 kW (2.04 HP), Professional industrial vacuum tumbler in very good condition, ideal for marinating and processing meat products. Robust and reliable construction, designed for uniform mixing and improved product quality. Supplied without a cooling system and ready for immediate use. Kjdpfx Ahez Dac Uegsnb

Condition: excellent (used), Vötsch VC³ 4018 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Machine type: Climate testing chamber / Temperature testing chamber Design: Air-cooled Test chamber volume: approx. 190 liters Kjdsztu Nqepfx Ahgsnb For sale is a used climate testing chamber from the manufacturer Vötsch. The VC³ 4018 is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development applications. Technical data: Temperature range: -42 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 5 K/min Max. heat compensation, temperature operation: approx. 2300 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.5 K Climate range temperature: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Temperature deviation (time) in climate operation: ± 0.1 to ± 0.3 K Temperature homogeneity (spatial) in climate operation: ± 0.5 to ± 1 K Humidity deviation (time): ± 1 to ± 3 % RH Heat compensation, climate operation: approx. 400 W Test chamber dimensions (approx.): 580 x 450 x 750 mm (W x D x H) Cabinet dimensions (approx.): 870 x 1550 x 1800 mm (W x D x H) Weight (approx.): 470 kg Refrigerant: R404A Refrigerant quantity: 2.50 kg Max. condensation pressure: 22.5 bar g Max. evaporating pressure: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Test chamber lighting: Halogen, 2 x 24 V / 50 W Equipment Touch panel operation Viewing window in the door Stainless steel test chamber Test chamber lighting Side openings Shelves / Internal equipment as shown in the pictures Documentation / Operating manual Additional accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures Inspection possible by appointment Safety note For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Due to the size and weight, shipping by freight forwarder is recommended. Scope of delivery as shown in the pictures. Subject to change and errors in technical data as well as prior sale.

Condition: used, Year of construction: 2004, Manufacturer: Pyrazol year of manufacture: 2004 operating temperature +10- +50 C total diameter: 1500mm height: 21000mm connection: 4x 200mm flanged 2x 3.4 inch Ksdpfouf Rxdsx Ahgsnb + cleaning opening weight: empty 500 kg

Condition: used, Year of construction: 2020, operating hours: 2,000 h, machine/vehicle number: LC665, Technical Specifications & Performance DataThis Tetra Pak A3/Compact Flex aseptic carton filling and capping line is configured for Prisma Edge packaging in the 250 ml format. It combines carton filling, cap application and Helix handling equipment for compact beverage production and industrial packaging operations. The available equipment is designed around the Tetra Pak filling platform and Cap30 DreamCap closure system.Manufacturer: Tetra PakFiller model: A3/Compact FlexMaximum production capacity: 9600 BPHPack format: 250 ml Prisma EdgeAvailable configuration: filler, Cap30 capper and Helix equipmentOperating hours: 2000Machine year: 2020Advanced Automation & Control SystemsThe equipment includes line control for coordinated operation of the available filling, closure application and handling sections. A controlled line architecture supports consistent product flow through the filling and capping process while allowing the individual modules to operate as an integrated packaging system. The listed configuration includes Filler, LC40, ACHX30 and Cap30 components.Production Line Integration CapabilitiesThis equipment is suitable for integration into an aseptic carton packaging line. The available filler, capper and Helix sections can be positioned with compatible upstream product preparation equipment and downstream carton conveying, accumulation, coding and secondary packaging machinery. Its Prisma Edge format configuration makes it relevant for beverage production applications requiring 250 ml carton packs.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3/Compact Flex2020Capping MachineTetra Pak Cap30 DreamCap2020Various EquipmentTetra Pak Helix2020Machine Condition & Maintenance HistoryThe line is reported as running, with 2000 operating hours. The stated availability is limited to the filler, capper and Helix equipment. This condition provides a practical basis for buyers planning a second hand aseptic packaging installation, line extension or replacement project within an existing industrial packaging environment.Operational Performance & VersatilityThe A3/Compact Flex platform is intended for high-output carton filling and closure application. The Cap30 DreamCap system is matched with the listed carton format, supporting a consistent filling-and-capping sequence for Prisma Edge packs. With a maximum stated output of 9600 BPH, the equipment can support structured beverage production where compact retail carton formats are required.Installation Requirements & Site PreparationInstallation should be planned as part of a complete aseptic carton packaging layout, with appropriate product supply, utility connections, hygienic process interfaces and downstream pack handling. Site preparation should allow access for operation, cleaning, maintenance and format-specific material handling. Compatible line controls and conveying should be assessed when integrating the available modules into a used bottling line or broader industrial packaging... Kodpfx Aezucgmehgonb

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Knjdpfx Ahjzxqypjgeb Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, mileage: 310,178 km, power: 355 kW (482.67 HP), first registration: 07/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, electronic stability program (ESP), parking heater, soot filter, FT XF 530 SC PXP Desert Yellow Headlight beam pattern for right-hand traffic Electrical connection for trailer, 24V/15-pole. Cable: 15-pole + EBS Front mirror Left-hand drive OBD, Euro VI Stage E Auxiliary heater with waste heat recovery and timer Speedometer display in km/h Automatic transmission with manual override – full version Basic immobilizer Rear lights with incandescent bulbs Stabilink rear axle suspension Halogen headlights Emission class Euro 6 Max. total vehicle weight (GVW) drive axle 50000 kg, Class 3 Traction control system (TCS) Space Cab – cab EAS unit on the right side Driven rear axle with disc brakes Rear fender Splash guard Front underrun protection Convex main mirror Pneumatic connection for trailer, fifth wheel coupling Running board with step, standard Exhaust pipe horizontal, low Body plug at the front of the cab Cold foam mattress for lower bunk Running board step on the left Work lights, LED Automated transmission, TraXon, 12 gears Color of interior trim: Dark Sand Standard mounting plate DAF Connect Co-driver's seat: Basic Fuel tank left Adaptive cruise control with FCW and AEBS-3 Front axle 1, 8,000 kg, load capacity index 156 Type approval for complete vehicles (WVTA) Rear axle 1, 13,000 kg, load capacity index 149 Standard maintenance interval Luxury speaker system with 6 speakers Cab, interior trim Delta black Door trim: loosely woven fabric Smooth steering wheel, color black Electronic stability control (VSC) Driver's seat armrest Preparation for toll system Fog lights Lane change warning system Window lifts: electric Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connection Driver Performance Assistant Storage compartment for trailer connections H3296 Desert Yellow Central locking Sealing, lower part, F-cab structure and fender in driver's cab Antennas: DAB-prepared, 2x mobile, GNSS extra: CB External sun visor, green, translucent Cab air-suspended Driven rear axle(s): 315/80 R22.5 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Rear view warning system 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 Aluminum fuel tank 430 l, height 620 mm ZF Intarder Air intake, black handle, in cab Aluminum wheels Alcoa Dura-Bright Auxiliary power supply: standard + 2x 40 A Digital tachograph, VDO 1C Vertical battery box left, no spare wheel holder Auxiliary engine rear, 13 hours, continuous, pump drive KA saddle specification 470 mm Preparation for compressed air system Front axle(s): 385/65R22.5 Air intake on top with cyclone filter Rear axle ratio 2.69 First transmission auxiliary drive NH/4c-R-32/25 Curtains with partition curtain Headlight and bumper: cab color Cool box or refrigerator Dust protection shield Rear: 13.00 t, air suspension, SR1347 Speed limiter: 90 km/h Automatic cab climate control ECO performance AdBlue® tank 75 l, left chassis side Wheelbase 3.60 m / rear overhang 0.75 m Truck phone Chassis preparation with hydraulic front axle from PXP Front: 8.00 t, parabolic, 187N ECAS remote control with extended functions Navigation preparation Driver's seat: Luxury Air Analog body signals and warnings Axle load monitoring Battery energy monitoring Preparation for aftermarket switches Compressed air tank made of aluminum Protective net on lower bunk CAN J1939 functions in the body plug Lower bunk with drawer, 65 liters PAUL PXP (GER) for CF or XF Loading camera FHS roof Wind deflectors side windows 2 all-round lights Kedpjzahc Ejfx Ahgenb

Condition: used, functionality: fully functional, mileage: 227,177 km, first registration: 07/2023, fuel type: diesel, empty load weight: 8,172 kg, overall weight: 18,000 kg, tire condition: 60 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 965 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 5,890 mm, total width: 2,518 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Equipment: ABS, Bluetooth, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, parking heater, spoiler, VOLVO FH13.500 Globetrotter I-Save Semi-trailer tractor unit 4x2 leaf-spring suspension at the front - air suspension at the rear Differential lock Automatic transmission VEB-Plus GVWR 18,000 kg - Unladen weight 8,172 kg - Permissible total train weight 44,000 kg Total truck length 5.89 m Wheelbase 3.70 m Sleeper cab with 2 berths Knjdpfozrg Ngex Ahgob Tires: 60% tread remaining ABS Euro 6 610L + 365L fuel tanks Spoiler Full fairing Sun visor Bluetooth Fog lights Central locking Air-suspended driver's seat Auxiliary air conditioning Auxiliary heater Air conditioning Navigation system Refrigerator Electric windows and exterior mirrors Radio All information is subject to change without notice; errors and omissions excepted.

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Heidenhain TNC 310 cnc control C and B-axis manual with display swivel rotary table electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Knsdey E Iztepfx Ahgjb Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, load switch, power switch, power disconnector, auxiliary switch, main switch, disconnector -Manufacturer: VEB, Fuse-switch disconnector, load break switch 250 A, unused, original packaging -Type: FLTA 250 -Quantity: 1x load break switch available Kjdpfx Aoygt Dujhgonb -Cardboard dimensions: 180/180/H70 mm -Weight: 1.8 kg

Year of construction: 2022, condition: excellent (used), Dycometal Type: CCK -40/1500T Knsdpszgr Rrofx Ahgsb Water-cooled climate chamber Volume in liters: 1500 Internal dimensions: height 1000 mm, width 1000 mm, depth 1500 mm External dimensions: height 2200 mm, width 1293 mm, depth 3400 mm Thermal testing Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate: 2.0 K/min Heating rate: 3.5 K/min Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5 °C to 1.5°C Climate testing, temperature range: +10°C to +90°C Humidity range: 10% to 98% RH Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Condenser: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1120 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.