Used System 3R Workpal 1 for sale (94,280)

Condition: new, Balance Systems 9SHVM2512BN220 balancing card SN: B804342, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hnjdpfx Aajx Eqvgs Ejp

Condition: new, Balance Systems 9SGJ025A050200 SN:B512880, unused in opened original packaging, 100% functional, delivery as per photos. Hnedpfjx Eqvmox Aa Esp

Condition: new, Year of construction: 2026, Are you looking for a professional storage solution for industry, commerce, agriculture, photovoltaic systems, or emergency power supply? With the APS 2000 kWh - 4000 kWh battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical Data * Storage capacity: 3 MWh or 4 MWh per container * AC power: 1.5 MW or 2 MW * Lithium iron phosphate technology (LFP) * High-quality cell, cell module, and BMS technology based on CATL components * Integrated power electronics for industrial and utility applications * Liquid cooling and air conditioning system for continuous operation * Integrated protection and safety systems * Grid-parallel operation, island operation, and hybrid operation possible * Expandable to storage farms with several MWh up to the double-digit MWh range Typical Applications * Self-consumption optimization * Peak shaving (load peak reduction) * Electricity cost reduction * PV surplus storage * Grid stabilization * Load shifting * Curtailment reduction * Feed-in optimization * Black start capable energy systems Hsdpfx Aogu Rukea Esnp * Emergency and backup power supply * Hybrid solutions with PV, BESS, and generators Optionally available * APS Energy Management System (EMS) * Grid-parallel operation * Island operation * Black start concepts * Integration of PV systems * Integration of diesel generators * Integration of CHP systems * Integration of charging infrastructure/charging stations * Energy flow optimization * Remote monitoring and energy management * Multi-container systems with several MWh total capacity Your Advantages ✓ High safety through LFP cell technology ✓ High-quality CATL technology for cells, cell modules, and BMS ✓ Very high cycle life (≥ 8,000 cycles) ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems ✓ German system integration by Albari Power Systems ✓ Multi-level safety and fire protection concept ✓ Grid-parallel, island, and hybrid operation ✓ Scalable from a single container to a large storage farm ✓ Individual project planning and commissioning ✓ Service and support Turn-Key Solutions from a Single Source Albari Power Systems supports you from the initial project idea to the finished commissioning: * Project analysis and economic evaluation * Storage sizing * EMS configuration * Grid and protection concepts * Engineering * Commissioning * Service and maintenance Designed in Germany The APS large storage containers are designed and engineered in Germany. Architecture, safety concepts, EMS logic, and integration strategies are developed according to European standards and industrial quality standards. We would be happy to create an individual concept for your project. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration

Condition: new, NORD Drivesystems SK agitator drive with stainless steel agitator New, unused agitator drive from stock. Complete, consisting of a NORD geared motor, flange mounting, and stainless steel agitator for tank and process applications. Manufacturer: NORD Drivesystems Motor type: SK 90L/4 Gearbox type: SK 9012.1AFBH VL2-90L/4 Design: Agitator drive with geared motor Condition: NOS (New Old Stock) Motor power 50 Hz: 1.50 kW Motor power 60 Hz: 1.73 kW Motor speed 50 Hz: 1395 min⁻¹ Motor speed 60 Hz: 1675 min⁻¹ Operating mode: S1 Protection class: IP55 Insulation class: F Voltage 50 Hz: 230/400 V Δ/Y Voltage 60 Hz: 265/460 V Δ/Y Rated current 50 Hz: 6.15/3.55 A Rated current 60 Hz: 6.15/3.55 A Power factor cos φ: 0.78 Efficiency IE1 at 50 Hz: 77.5 % Hedpfx Aaszb Nvvo Ejnp Efficiency IE1 at 60 Hz: 80.4 % Gearbox ratio: 8.09 : 1 Output speed: 172 min⁻¹ Mounting position: IM4 Agitator shaft: Stainless steel Agitator impeller: Stainless steel, 2-blade Flange connection: present

Condition: new, Year of construction: 2026, We have high-quality load banks from our series production for sale, with the following technical specifications: Condition: NEW Areas of application: - Load testing of emergency generators and uninterruptible power supply (UPS) systems - Grid stabilization through power consumption - Engine test benches Technical features: Hnedpfx Aofm T Euea Esp - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Load levels can be set via any key combination - Test report printout - Test automation, automatic start of load levels Operation and control: - Directly via the keypad on the load bank - Via remote box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame - Forklift slots and crane lifting device Includes electrical wiring diagrams Includes manual Includes software Delivery and commissioning possible for an additional charge.

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Hnsdpfx Aozcyq Hsa Esp

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Hedpfju Nu Tpex Aa Esnp Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. *

Condition: like new (used), Year of construction: 2008, volume flow: 3,700 m³/h, power: 2.1 kW (2.86 HP), input frequency: 50 Hz, Systemair KTEX 60-35-4 Atex fan 2.1kw 3700m3 duct mount KTEX fans feature a compact, streamlined design, high-performance forward-curved radial impeller and reliable ATEX-rated AC motors. power 2.1 Kw Voltage 230/ 400V 50Hz 5.8/3.8A IP44 Hedpfx Ajvu Hrkoa Esnp power 2.1 KW Air flow max 3.704 m³/h Pressure: 580 Pa Impeller rotation: 1.392 rpm Air flow max 3.704 m³/h Minimum static back pressure 225 Pa Conveyed air temperature max 40 °C Maximum temperature of the conveyed air when speed is controlled 40 °C Insulation class F Explosion-proof designation II 2 G Ex eb h IIB+H₂ T3 Gb Certificate Presafe 17ATEX9970X Ambient and pipe temperature -20 to 40 °C Dimensions and weights inlet (height x width) 350 x 600 mm outlet (height x width) 350 x 600 mm Weight 42 kg

Condition: excellent (used), For sale: Sterling Fluid Systems ZTIC 040160 industrial pump with Siemens 3kW motor. Hnjdpsyz Dxmofx Aa Eep A robust, professional unit designed for use in industrial installations, water circuits, and technological systems. ⚙️ Technical specifications: - Pump manufacturer: Sterling Fluid Systems - Model: ZTIC 040160 - Type: AA ODC B2 KX - Motor: Siemens IE1 - Power: 3.0 kW - Voltage: 230/400V (3~) - Frequency: 50 Hz - Speed: approx. 2835 rpm - Protection class: IP55 - Insulation class: F - Connection: flanged 🛠️ Features: - Centrifugal pump for water and industrial liquids - Heavy-duty industrial construction - Reliable Siemens motor - Flanged version – easy installation in piping systems - Designed for continuous operation 📦 Condition: ✔️ Used ✔️ Very good technical condition ✔️ Freshly painted ✔️ Normal signs of use visible 📌 Applications: - Industrial systems - Heating and cooling systems - Water circulation - Manufacturing plants - Agriculture 📦 Set includes: - Pump with Siemens motor - As shown in the photos 🚚 Shipping: - Shipping by courier or pallet possible - Personal collection also available - Assistance with transport arrangements is offered

Condition: good (used), Year of construction: 1999, Approx. 23 units of OTTO hazardous goods containers, 600L, Large Packaging "IBC" – used: Price per unit ex-location: €395 (net)! Manufacturer: Otto Containersysteme GmbH Model: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Serial number: 33782 Year of manufacture: 1999 Capacity: 600L Tank material: St. W 24 Hjdpfowzyn Dsx Aa Eonp Maximum permissible gross mass: 1,090 kg Tare weight: 190 kg With certification as Intermediate Bulk Container (IBC) for national (GGVS/GGVE/GGVS) and international (ADR/RID/IMDG Code) transport of dangerous goods of packaging groups I, II + III (X rating) * Dimensions per DIN 30741 * Steel container, hot-dip galvanized * With hinged, lockable lid * Lid locks in place by special spring mechanism at any opening angle up to approx. 70° * Container with continuous body, only 2 closures on the front * With forklift pockets, safety hooks for PE bags, type plate and compartment Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Hnedpfxjffh Atj Aa Esp Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: good (used), Clean air extraction system Hnodsrb D Nepfx Aa Eep Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Hjdpfx Asgmfa Aoa Esnp Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, Rated voltage: 100V AC±10% Power consumption: 340VA Hnodpsytrpvjfx Aa Ejp Rotary microtome The LEICA RM2155 is a robust, fully motorized rotary microtome designed for the precise production of thin sections from paraffin- or resin-embedded samples for histological, pathological, and materials analysis applications. The instrument combines motorized automation with manual fine control, ensuring reproducible sectioning quality even at high throughput rates. Technical features: - Motorized sectioning with adjustable speed and motorized coarse advance, optimizing workflow for routine and demanding specimens. - Adjustable section thickness range from 0.5 µm to 60 µm with fine increments to accommodate varying material requirements. - Specimen advance: 27 mm via stepper motor - Vertical stroke: 70 mm - Maximum sectioning range without retraction: 65 mm (without specimen orientation) - Maximum sectioning range with retraction: 60 mm - Specimen retraction in motorized cutting mode: 10, 30, 70 µm (adjustable depending on speed, can be deactivated) - Specimen retraction in manual cutting mode: 5, 10, 15, 20 µm (can be deactivated) - Movability of knife holder base: N/S travel ±25 mm, E/W travel ±20 mm - Maximum specimen size (WxHxD): 50 x 60 x 40 mm - Specimen orientation: horizontal 8°, vertical 8°, rotation ±90°, trimming steps 5, 15, 30 µm - Electric coarse drive: 900 µm/s Cutting motor: - Cutting speed: 0; 0.5 – 420 mm/s - Return stroke speed: approx. 120 – 420 mm/s Application areas: Production of consistent tissue sections for microscopic analysis in histology, pathology, neuropathology, as well as in materials science investigations; suitable for both research and routine laboratory environments with high demands on sectioning precision and reproducibility. The LEICA RM2155 stands out for its technical reliability, precise sectioning performance, and versatile application possibilities, making it a long-term investment for demanding laboratory processes. Including: power cable, knife holder base, knife holder NZ, standard chamber, foil chamber, carbide knife (16 cm), manual

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 1100 1 control unit for the mixer with frequency converter 1 cutter head, 5.5 kW 1 manual shut-off valve 1 separate control panel ("remote control")  maximum useful volume: 770 liters  mixing product: plastic granules  bulk density: ~0.7 - 0.8 kg/liter  product properties: free-flowing  mixing time: < 3 min. MACHINE DESCRIPTION Mixing drum  horizontal cylindrical mixing drum  end walls screwed to the drum Mixing system  mixing tools, such as ploughshares or inclined blades, screwed to blade arms in pockets Bearing  bearing of the shaft in flange bearing housings located outside the mixer, with roller bearings Sealing  shaft sealing by easily replaceable packing glands, packing glands cleaned by air Feeding  2 nozzles with flange, according to dimension sheet Ventilation  through 1 nozzle with flange, according to dimension sheet with filter bag incl. bracket and welded-in protective grid Discharge  via a dead-space-free closing flap, pneumatically operated  1 outlet nozzle with flange, according to dimension sheet Liquid feed option  none Inspection and cleaning  through 1 flap at the front of the drum, (1700 x 550) Flap closed by quick-release fastener  occupational safety and accident prevention by locking magnet and limit switch (not wired) Materials  mixing drum made of: stainless steel 1.4306  mixer shaft made of: stainless steel 1.4306  mixing tool made of: stainless steel 1.4306 Subject to prior sale Please send inquiries only by email Hnodpfx Aaoza Ap Te Ejp Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data Hnsdjzaq Rfepfx Aa Esp LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Power consumption: 1200 W Rated current: 10 A Circuit breaker: 15 A Machine Information LX550 Serial No: 09LX550034 LX581 Serial No: 09LX581002

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We have here a HSA systems HS1000 vacuum mailtable with 2 inkjet heads available. Year 2017 but was a demo machine so is not being used much, like new! Has never seen production. Complete with a streamfeeder V1000 friction feeder and the TIPC15 touchscreen together with 2 cartridge printheads, one with 3 cartridges and the other with 2 cartridges you are able to print envelopes and documents very ease with high speed Hnedpfx Aoy R Dhaea Eep

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph Hnodpfsvgvhxjx Aa Esp It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Compatibility with Filling Machines A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance.

Condition: used, Year of construction: 2004, Force Presscylinder: 4000 KN Steel, Gush: 4-6 to/h Aluminium: 3-4 to/h Hodpfx Aelhqc Nja Esnp Driving Power: 1x22 kW Arrangement Surface 7x4, 2x4, 1 mxm Machnie weight: 23 to Place: Austria Available immediately

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Hjdsy Tlzaopfx Aa Ejnp

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection Hnedpfx Ajxt Dk Rea Esp - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: used, US-2100 - 75 mm Increasingly wider bands are being demanded for the logistical and sales-promoting bundling of units. Hodpfxjwrp Ine Aa Eenp The US-2100 with its unique ultra-sonic sealing processes paper and plastic bands with a width of 75 or 100 mm. The bands offer plenty of space for printing marketing-related information. The machine is easily accessible, usable in small spaces, and offers high safety.

Year of construction: 2025, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Height adjustable also available with other lengths Inkjet base Hnjdpfx Aehl H Ikea Esp

Year of construction: 2022, condition: new, Suction belt with two suction belts Vacuum individually adjustable Speed ​​up to 160m / min Infinitely variable speed Height adjustable also available with other lengths Hsdpfx Ajch Hcaoa Eenp Inkjet base

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm Hsdpfondk N Asx Aa Eonp - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site