Used Schmedt Präcut Typ 65 for sale (9,062)

Condition: good (used), Year of construction: 2014, operating hours: 5,770 h, fuel type: diesel, Genie S-65 telescopic boom lift, 4x4, DEUTZ diesel engine, 5770 hours, 21.8m working height, 2014. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Kdsdpfx Aszlhndea Eep Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 1983, condition: good (used), 1 Console milling machine Manufacturer: RECKERMANN, Type: KOMBI 900, Year of manufacture: 1983, Serial number: 6367P, Table size: 1,000 x 310 mm, Travel range X/Y/Z: 720 x 220 x 450 mm, Tool holders: SK 50, Heavy-duty machine vise, Kdsdpfx Ajh E Du Dja Esp Spindle speeds: 3...2800 rpm

Condition: good (used), 3 x 65 m³ aluminum silo (granulate storage silos) with long frame (used) Contents approx. 65,000 liters Diameter (inside) approx. 3,000 mm Kjdovmidyopfx Aa Ejdp Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone inclination: 90 degrees Connections in the topsoil: 1 vent nozzle with hood DN 200 1 flange nozzle DN 100 In the shell: 1 folding dome DN 450 1 filling pipe pulled downwards DN 80 Cone: The cone ends in a flange DN 150 with suction box otherwise as per sketch and photos

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. Kdjdpfx Asl R Hy Aea Ejp With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Kdjdpezil R Rjfx Aa Ejp Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Kdodpjzill Usfx Aa Eep Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: not inspected (used), Year of construction: 1975, Power connection: 400V, 13kW 2 heating plates, each measuring 1200 x 2250 mm Heating plates controlled by 2 thermostats Pressing pressure: 250 bar Kjdpfskkflbox Aa Eodp Dimensions (L x W x H): 2590 x 1330 x 1950 mm Weight: approximately 2800 kg Press stroke: 380 mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, 5.5 kW (7.5 HP), 3 spindle speeds 15″ touchscreen (19:6) Kjdpoyw Rz Hefx Aa Eedp Motorized height and tilt adjustment Double roller carriage 3,200 mm Tilting range 0 – 46° Max. cutting height 154 mm Main saw blade D = 300 – 450 mm Large safety hood Scoring unit with LED lighting Parallel fence DIGIT X, cutting width 1,410 mm Angle-mitre fence 3,450 mm, without length compensation

Condition: reconditioned (used), Year of construction: 1997, Connected load 380V 11kW 30A electric swivel -5° to +45 electric height adjustment digital display Kjdeub S U Sjpfx Aa Ejdp clockwise/anticlockwise rotation speeds 3000/4500/6000/9000 rpm Milling fence with siko counter Spindle diameter 30 mm Table size 1350 x 800 mm Control panel on top Extraction connection 2x120 mm

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, Two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW Compressed air connection 6 bar Fully automatic pneumatic control with foot valve Additional switch for "chip removal" program T-shaped drill head with 7+2 drill spindles, 32 mm pitch Drill shank diameter 10 mm 90° pivoting with locking mechanism Chassis Kedpfjv Npw Ejx Aa Eedp

Condition: like new (used), functionality: fully functional, total width: 2,600 mm, total height: 1,250 mm, Motor power: 0.75 kW with a drill head for drilling corner bearings and olives automatic height sensing Kdsdpfsx Ez Uaex Aa Eep

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,205 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG MORI DMU 65 MonoBlock was manufactured in 2011. It features impressive X, Y, and Z travels of 735 mm, 650 mm, and 560 mm respectively, along with a spindle speed of 18,000 rpm. The machine is equipped with a tool changer that has 30 magazine positions and utilizes a Heidenhain iTNC 530 control type. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 MonoBlock vertical machining centre we have for sale. Contact us for further details. Cooling throuhg spindleSpindle was replaced in the past Technical Specification Kodpfx Aszidqcsa Ejdp Through-spindle Coolant Yes

Condition: good (used), Year of construction: 1995, - Max. turning diameter: 160 mm - Max. bar diameter: 65 mm - 2 x tool slides, travel 70 mm - 2 x cross slides, travel 70 mm - 8-position turret, non-powered - Max. main spindle speed: 7,500 rpm - Chip conveyor Accessories Ksdjzidcrspfx Aa Esdp - Bar feeder IEMCA TAL 65/32 Dimensions (L x W x H): - Machine with chip conveyor: 4200 x 1385 x 1800 mm - Bar feeder: 4000 x 800 x 1400 mm Total weight: 6,500 kg

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric Kdodpfx Aaozicl Es Eop 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control

Condition: excellent (used), Pfeiffer DUO 65 Two-Stage High-Performance Rotary Vane Pump Here we offer a Pfeiffer DUO 65 two-stage high-performance rotary vane pump. Pfeiffer DUO 65 Two-Stage High-Performance Rotary Vane Pump Two-stage high-performance rotary vane pump with a pumping speed of up to 70 m3/h. With a 3-phase motor. With a temperature sensor (3TF) for optimal motor protection. Integrated gas ballast and HV safety valve. For all applications in the coarse and fine vacuum range. Duo 65, 3-phase motor, 3TF, 200-230 / 346-400V, 60 Hz Type: PK D46 642 A Kdodpjzianqsfx Aa Eep with ONF 35/65 oil mist separator, corrosion-resistant version. It sits on the pump's exhaust nozzle and prevents air pollution by oil mist. Type: PK Z40 150 Scope of delivery: (See picture) We will gladly answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 274 F, turning diameter over cross slide: 65 mm, turning length: 223 mm, turning diameter: 160 mm, spindle bore: 100 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 115 mm, travel distance Y-axis: 69 mm, travel distance Z-axis: 230 mm, spindle motor power: 17,000 W, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 60 rpm, Equipment: documentation/manual, Multi-turret automatic lathe with numerical control (CNC), counter-spindle (sub-spindle), and motorized turret: CNC automatic lathe MUPEM WIN 6500, designed for precision machining in large series from bar stock. Robust multi-turret machine construction, equipped with a main spindle, counter-spindle (sub-spindle) with a synchronous drive device (pick-up), motorized turret, and independent front and rear transverse/vertical carriages, enabling simultaneous operations and highly efficient machining cycles. CNC control with color touchscreen (MUPEM interface), providing real-time display of the spindle, sub-spindle, turret, carriage positions (Z turret, Longitudinal, Front, Rear, Vertical 1, and 2), chuck, pick-off, and auxiliary outputs. Complete manual control panel: manual/automatic mode, speed selector (slow/medium/fast), increments (small/medium/large), feed potentiometers, and spindle speed percentage, emergency stop button, and locking key. Equipped with a bar feed system (Hydrobar LNS type loader, visible in the images), chip conveyor (Auxkal), and coolant system. Main technical features Headstock Maximum bar capacity with chuck: 65 mm Maximum chuck diameter: 160 mm Front spindle bearing diameter: 100 mm Main spindle Power: 17 kW (variable AC) Speed range: 60–3,000 rpm Turret 8 stations (1" hole), optional 6 stations (1 1/4") Maximum working travel: 230 mm Maximum feed force: 12,000 N Rapid traverse rate: 15 m/min Indexing time: 0.3 s Motorized turret 6/8 stations, 6/4 driven tools Tool holder shank diameter: 1 1/4" Maximum drill diameter: 16 mm / tap: 12 mm Motor power: 2 kW — max. 3,000 rpm Synchronous turret drive (Pick-up) Maximum clamping diameter: 32 mm Power: 2 kW — max. 3,000 rpm Transverse carriages Maximum travel: 69 mm Maximum feed force: 12,000 N Maximum longitudinal travel (6-axis version): 115 mm Vertical carriages Kdedpfx Aajzk D Sio Eop Maximum travel: 69 mm Longitudinal adjustment: 50 mm Maximum feed force: 12,000 N Hydraulic system Pressure: 70 bar Tank capacity: 75 l Coolant system Flow rate: 30 l/min Pressure: 1.5 bar Capacity: 80 l Dimensions and weight Height from floor to spindle center: 1,135 mm Required area (approx.): 2,600 x 1,660 mm Overall height: 1,700 mm Approximate weight: 3,000 kg Included equipment Hydrobar type bar loader/feeder (LNS) Auxkal chip conveyor Coolant system Motorized turret with various clamping tools MUPEM CNC control with touchscreen

Condition: used, CATALOGUE NUMBER 7650 Kdodpszh Ivtsfx Aa Eop Technical data: - max. working length 1500mm - max. working diameter 250mm - milling (disc milling cutter) 7.5kW - spindle – 2800 rpm, 3kW - spindle speed 700/1200/1500/2000 rpm - grinding unit 0.75kW - hydraulic motor 3kW - total power 17.75kW - air consumption 6-8 bar - infeed conveyor for workpieces up to 150x150mm - diameter of dust extraction nozzle 100mm, 160mm - dimensions for transport (length/width/height) 4350x2300x1980mm - weight approximately 3000kg ADVANTAGES - made in Germany - automatic hydraulic copying system - original DTR documentation - unpainted - used lathe, very good condition Net price: 59900 PLN Net price: 14262 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2009, Horizontal machining center Machine type: DMG DMC 65 H duoBlock Control: Siemens 840D Solutionline Year: 2009 new spindle: 2026 SPECIFICATIONS Travel X-Axis: 700 mm Y-Axis: 700 mm Z-Axis: 700 mm Spindle speeds: 12.000 rpm Tool: CAT 40 Toolchanger Tool capacity: 45 Amount of paletts: 2 Palett size: 500 x 500 mm Equipment Chip conveyor Chip rinsing pistol Internal cooling: 40 bar Cooling tank: 960 l Caliper: Renishaw Tool setter: Blumlaser Kdedszi Dz Iepfx Aa Ejp 3D Quickset Electronical handwheel New in 2026 Spindle bearing Rotary union All pneumatic lines All oil and air filters All oils and fats Laser serviced Various wearing parts

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Kjdpfx Aashvan Ie Eedp • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm Ksdpowp D Nbofx Aa Ejdp toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: ready for operation (used), Vertical thread-rolling machine HENNING 03E Kdjdszkv Euepfx Aa Ejp -Henning - Metzingen -Year of manufacture 1981 -Rolling length approx. 1100mm -Motor power 3KW -Coolant system Dimensions L x W x H 0.7 x 0.5 x 1.7 meters / Weight approx. 450 kg Subject to errors and omissions.

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, spindle speed (max.): 5,600 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 520 mm, spindle motor power: 18,500 W, type of input current: three-phase, overall weight: 5,600 kg, bar passage: 42 mm, input current: 85 A, number of tool turrets: 2, number of tool stations in tool turret 1: 14, number of driven tool stations in tool turret 1: 14, number of tool stations in tool turret 2: 14, number of driven tool stations in tool turret 2: 14, CNC Lathe TRAUB TNC 42/65 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2009 CNC control: TRAUB TX8i Number of axes: 8 Stroke Y axis: +/- 35 [mm] Stroke Z1 axis: 450 [mm] Stroke X1 axis: 140 [mm] Stroke Z2 axis: 520 [mm] Stroke X2 axis: 140 [mm] Stroke E axis: 450 [mm] Spindle throughbore: 42 [mm] Max. spindle speed: 5600 [rpm] Increment C-axis: 0.001 [°] Spindle power: 18.5 [kW] Counter spindle throughbore: 42 [mm] Max. counter spindle speed: 5600 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 11 [kW] Type of tool holders: VDI 30 Number of tool stations - Turret 1: 14 Number of tool stations driven - Turret 1: 14 Max. speed driven tools - Turret 1: 4000 [rpm] Number of tool stations - Turret 2: 14 Kdedpfszh D Aisx Aa Ejp Number of tool stations driven - Turret 2: 14 Max. speed driven tools - Turret 2: 4000 [rpm] Total power required: 107 [kVA] Rated current: 85 [A] Supply voltage: 400 [V] Weight: 5600 [Kg] INCLUDED EQUIPMENT: x1 Set of collets x1 Set of tool holders x1 Chip conveyor x1 IRCO PROFIMAT ECO 42.6 bar feeder x1 KNOLL coolant system Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to turning and milling centers, machining centers and milling machines, including brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG and Mazak. CNC lathe, CNC turning center, CNC turning machine, machining center, CNC milling machine, CNC machining center, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: used, Workpiece and profile stop good condition cleaned Kedpfx Ajzkvyrja Eodp function tested partially refurbished Manufacturer: Festo Type: UP 65 Machine No.: 771226 Number of spindles: 1 Spindle diameter mm: 40 Clamping height / width mm: 200 Working width mm: 200 Profile depth mm: 65 Milling height mm: 110 Tool diameter mm: 250 Rotational speeds RPM: 4300 Table size mm: 660x350 Lift table pneumatic Profile stop Workpiece clamping pneumatic Motor kW: 7.5 Dust extraction connection mm: 100 Space requirement approx. L x W x H mm: 1300x700x1200 Total connected load: 7.5 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without warranty

Condition: used, Henninger high-speed milling spindle SK 40 Type 801 H580 Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. +60°C with tools over: ø 12 mm Kdsdpfovygzijx Aa Esp without collets

Condition: used, enninger high-speed milling spindle SK40 Type 801 M326 Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm Kdjdpfx Aovyg A Tja Eep without collets