Generator set immediately from stock

Atlas Copco Typ Atlas Copco P 2500i AP S5 50Hz 230V

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Technical check : OK Pas de télécommande de la grue Iasdpfx Abjrhzy Hjuer

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Iedpfx Asqt Dmyjbujar The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Iajdpfegyzzujx Abusr Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Ijdpfx Asqabiaobusar Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: new, Year of construction: 2025, Delivery every Monday/Tuesday! Reliable! Mobile folding bench 1400/2.0mm without roller shears We are your partner when it comes to sheet metal working machines. Our claim to ourselves is to provide high-quality and reliable work in order to more than meet your requirements! We are only so successful because we put our heart and soul into our work! Technical specifications the maximum working length 1400 mm the max. thickness of steel sheet for 2.0mm bending beam 24 mm the weight of the handheld machine is about 190 kilograms lifting the top beam in three layers The maximum clear width between the beams is 80 mm Delivery throughout Germany 165 euros Price: 1450 euros incl. transport rollers Delivery time: every week Cash on delivery The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) optionally cost 350 euros Manual folding machine costs 75 euros as an option The machine complies with CE guidelines and has a 12-month guarantee. We issue the invoices with 0% (intra-community delivery) as well as with 23%. We are looking forward to your contact! Iedob Hqa Eopfx Abusar

Condition: new, empty load weight: 540 kg, maximum load weight: 2,460 kg, overall weight: 3,000 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 195/55R10C, Alufelgen, Felge schwarz, Car transporter from the manufacturer ANSSEMS model MSX3000 405x200 Go-Getter. Ijdpfx Aboq Rfl Tsusar As standard equipment, the Anssems car trailer has an aluminum floor, side edge profile in black, aluminum rims in black, LED lighting, storage box, lashing eyes on the outside of the frame, aluminum drive-on rails can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as high tarpaulin, side wall attachment, wheel stopper, rear support set, car lashing straps and anti-theft device.

Year of construction: 2025, condition: new, ⭐⭐⭐⭐⭐ (5.0) 58 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ shipping : 30-days delivery ✈️ ✅✅✅Energy class A+++✅✅✅ EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder oven with gas or diesel heating - BOXLINE 15-3025 ✔️Internal dimensions : 1500*3000*2100 ✔️External dimensions: 1780*4000*2500 ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow rate (fan) : 6,800 [M³/H] ✔️ Power of the circulating air fan: 2.2 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ✳️Functional principle✳️ This oven is intended for heating powder coated parts. The paint polymerizes at a temperature of around 200ºC (depending on the type of paint used) and forms a film on the surface of the metal. The temperature control in the oven is carried out by the control unit, which receives a signal from the temperature sensor in the oven. ✳️Oven Body✳️ The body of the polymerization furnace consists of heat-insulating panels that are inserted upright into each other and glued together with a heat-resistant sealant. Conveyor distances to the oven door channels can be left if desired. Optionally, it can be made with pivoting double doors. ✳️Heat exchanger✳️ The heat exchanger is installed in the side part of the polymerization furnace body. The internal structure and materials of the heat exchanger are designed in such a way that the temperature in the furnace can be increased to 230 ° C, and the temperature difference at various points is the allowable ones Heat exchanger manufactured from 3 mm. AISI310 Quality STAINLESS STEEL ✳️Circulation fan✳️ Air circulation in the oven is carried out by four circulation fans with insulated chassis. Blade air propellers are often used in circulation fans. ✳️Digital fully electronic temperature controller✳️ ✳️Exhaust fan✳️ It is used to suck in and blow out the gases produced during the polymerisation of the powder in the furnace. If necessary, the exhaust fan can work continuously after a certain period of time or turn on automatically from time to time. ⭐Follow us for new campaigns⭐ Iajdpfeghf R Ujx Abujr ☀️ 2 YEAR WARRANTY ☀️

Condition: used, operating hours: 1,980 h, power: 103 kW (140.04 HP), gearing type: mechanical, fuel type: diesel, first registration: 05/2020, color: green, overall weight: 10,450 kg, mileage: 1,980 km, empty load weight: 6,900 kg, maximum load weight: 3,550 kg, suspension: other, number of seats: 2, Equipment: air conditioning, all wheel drive, cabin, Front hydraulics, 1st hand, radio, power steering, HU/AU new, AutoPowr transmission Diesel hydrostatic power steering All-wheel drive First registration 25.05.2020 103 kW 4,525 cm³ 1,980 operating hours Industrial front loader Front PTO Front hydraulics device Autotrac 360° illumination Cabin Cab suspension Suspended front axle Air conditioning Heating Command Arm Display in the A-pillar Radio 2-seater cup holder 40 km/h approval 1st hand Aluminum rims Empty weight 6,900 kg permissible weight 10,450 kg Hand Alloy rims Unladen weight 6,900 kg Gross vehicle weight 10,450 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE IS SECOND. If you have any further questions, please do not hesitate to contact Mr. Faller on the following number. //*EXCHANGE, DEPOSIT OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Isdpsvic Drefx Abuoar

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop Iaodpfx Abshf Na Souor General specifications: ----- Drive motor power: 11,2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Standard accessories included.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 1,700 kg, fuel type: diesel, tank capacity: 180 l, color: white, output current: 435 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 110 kW (149.56 HP), continuous power: 100 kW (135.96 HP), total length: 2,750 mm, total width: 1,100 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 100 (100kW - 110kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 100R SZR - Maximum power - 110 kW / 140 kVA - Rated power - 100 kW / 125 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - Ricardo R6105AZLDS Fuel type - Diesel (Diesel) Combustion: - 22.0 liters per hour (at 75% of maximum power) - 14.5 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 7000 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳ ENGINE: Iaedpfx Aetpnm Uobuer 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274D 400V rated power - 100000 watts (100kW / 125kVA) 400V maximum power (up to 15 minutes) - 110000 Watt (110kW / 140kVA) Rated power 230V - 33000 watts 230V maximum power (up to 15 minutes) - 36600 Watt Rated current (400V) - 435.0 A Current protection - C16, C32, main - 200A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 180 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 110 x 275 x 145 cm Gross weight - 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - Electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 120Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.