Used Rcbos (Residual Current Circuit Breaker With Overload Protection) for sale (20,610)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Rcjdpjzu Avzefx Ahcef Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, power mirror, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Catalytic converter - Refrigerator - Air suspension - Air-suspended seats - Particle filter - PTO - Radio/Multimedia system - Rotating beacon - Rear view camera - Disc brakes - Sunroof - Seat heating - Sun visor - Lane keeping assist - Stability control - Toolbox - Additional steering axle Internal number for customer inquiries: 5-052 / Immediately available!!! MAN TGS 26.440 6x2H-4 BL 3-sided tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: FASSI F195A.2.24 e-dynamic Lifting moment 162 kNm (16.51 mt) Hydraulic four-stage extension 12.7 m e-dynamic hose system for 2 additional devices Slewing angle 400° Double-knee lever system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload protection system with FX 500 FASSI stability control FSC including LMB II Rcedpfx Ajylx Hlshcef Fassi RCS radio maxi - 6 functions with 3 joysticks (2-2-2) Special outriggers, outrigger width 6.64 m hydraulically extendable including FSC Outriggers can be operated via radio FL system (Full Lift) switchable fast gear valve for the extensions LED work light Vehicle: Diesel engine MAN D2676 LFAJ, 324 kW (440 hp) output, 2,200 Nm torque, Euro 6e Automatic transmission MAN TipMatic 12.24 OD 6x2H-4 MAN HydroDrive, hydrostatic drive of the front axle Wheelbase 3,600+1,350 mm Suspension leaf/air Trailer coupling RINGFEDER 40mm Type 4040/G150A (Alternatively with surcharge ø50mm) 2-line trailer brake connection, DuoMatic coupling 390 l fuel tank volume, 60 l AdBlue tank volume High-performance engine brake MAN Turbo EVBec, adjustable Differential lock driven rear axle Tag axle, 9,000 kg, not driven, straight, steerable, liftable Preparation for 2 cameras, one camera linked to reverse gear Cab NN: the practical one (narrow, medium length, normal height) Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating Sun visor windshield, inside, electric Cool box Control panel MAN EasyControl, 4 functions, can be operated from the outside when the door is open MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced Superstructure: Three-sided tipper body with crane mounted directly behind the cab Bed: Dimensions LxWxH 4,800 mm x 2,420 mm x 800 mm (Alternatively also available: Load area length 5,200 mm x 2,420 mm x 800mm) Front wall 1,000 mm high Special equipment: - Rear corner pillars fixed - Lifting aids for the side walls - Eight lashing eyes recessed on the left and right in the floor (4 per side) - Hydraulic crane/tipper/trailer can be switched over via a valve in the cab - Positioning of the underrun protection, the rear lights and the supply lines on the left - Central locking for opening the lower locks, pneumatically controlled in the cab - 2-circuit trailer tipping hydraulics Financing / hire purchase, as well as leasing / partial depreciation leasing is possible with...

Condition: good (used), Year of construction: 2018, cooling capacity: 19.7 kW (26.78 HP), type of input current: three-phase, type of cooling: air, overall weight: 316 kg, input voltage: 400 V, total width: 700 mm, total length: 1,600 mm, total height: 1,400 mm, warranty duration: 6 months, AIRCOOLED CHILLER Galletti MPE 019 C0 AB CAT2 19,7 KW Cooling capacity: 19,7 kW / 56 tons (12/7 — 35°C) Hydraulic module: 1 pcs. water pump (LOWARA CEAM70/3/A), expansion vessel Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 1 pcs. Copeland ZP91KCE-TFD-522 (scroll) Number of fans: 4 psc. Dimensions: 1.6х0.7х1.4 m. Weight: 316 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; Redpfxoufr Igo Ahcocf - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). This unit is listed in English for international buyers.

Condition: used, Year of construction: 2020, machine/vehicle number: MBI19, Used APSOL casepacking monoblock - year 2020Technical Specifications & Performance DataThe Apsol Automatic Case Packer from 2020 is engineered for reliable secondary packaging in industrial environments. Its robust construction and CE-compliant design ensure consistent performance with low downtime, making it an excellent choice for upgrading a used bottling line or enhancing a second hand industrial packaging setup. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolYear: 2020Production speed: 7–9 boxes per minuteElectrical rating: 400 V AC, 50 Hz, three-phase (3ph+N+GND)Installed power: 26.5 kWFull load current: 49 AShort-circuit rating: 10 kAProtection class: IP54Compliance: CEAdvanced Automation & Control SystemsDesigned for dependable automation, this case packer supports stable, repeatable operations in demanding packaging environments. Electrical architecture provides balanced power distribution and protection to safeguard motors and drives. Operator access and safety interlocks help maintain productivity while ensuring safety.Three-phase electrical supply for industrial dutyCE-compliant design with integrated electrical protectionsIP54 enclosure rating for dust and splash protectionClear operator interfaces for straightforward setup and monitoringProduction Line Integration CapabilitiesThis machine integrates efficiently into beverage production and broader packaging machinery lines. It is suitable for inline installation downstream of fillers, labelers, and inspection systems, handling the transition from primary to secondary packaging with steady throughput. Its configuration supports synchronization with upstream conveyors and downstream case sealing or palletizing equipment.Seamless integration into bottling equipment and packaging machineryCompatible with upstream filling, labeling, and inspection modulesPairs effectively with case sealers, wrap-around packers, and palletizersAppropriate for upgrading a used bottling line or expanding an industrial packaging lineMachine Condition & Maintenance HistoryThe 2020 build and verified electrical data indicate a modern platform suitable for immediate deployment. Offered as a second hand industrial packaging solution, it is presented in ready-for-operation condition to minimize commissioning time and accelerate line ramp-up.Operational Performance & VersatilityWith a capacity of 7–9 boxes per minute, this Apsol case packer delivers a balanced mix of speed and reliability ideal for small to medium throughput applications. The design focuses on stable case handling and consistent packing geometry, supporting quality-focused beverage production and general industrial packaging requirements.Consistent case handling for stable pack formationThroughput suitable for medium-speed production linesEngineere... Redpey Uvhasfx Ahcecf

Condition: new, Year of construction: 2026, General information Field of application: Construction Weights Empty weight: 1.900 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 18~28ton excavator Working pressure: 320 bar Cutting power: 320 kN Required hydraulic flow: 180 l/min Additional information Please contact Ö. Inalkac for more information AJCE Europe APL20RV pulverizer with hydraulic rotation is a top quality product. APL20RV pulverizer/crusher is 1850kg and fits on 18~28ton excavator. APL20RV pulverizer/ crusher has changable tooth plate and has also speed up valve. Rcsdpfx Aheqmnbwscof Contact us for details. concrete crusher/ Pulverizer/ broyeur/ cisaille/ HYDRAULISCHE BETONPULVERISIERER/ MEHRZWECKSCHEREN/ ABBRUCHSCHEREN/ TRITURADOR DE HORMIGÓN HIDRÁULICO/ TRITURADOR DE HORMIGÓN/ CIZALLA DE DEMOLICIÓN/ DRVICE/ ABBRUCHZANGE/ PULVERISIERER

Condition: used, mileage: 625,000 km, power: 338 kW (459.55 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,600 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Special equipment: Exterior mirrors and wide-angle mirrors, electrically adjustable and heated, battery 225 Ah, comfortable co-driver's seat, air-sprung and heated, with lumbar support and shoulder adjustment, front bumper trim, chrome-plated, curb mirror on the right, electrically adjustable and heated, roof antenna for CB radio, differential lock, rear axle, air horns on the cab roof (2), ETA circuit breaker, cab: with air suspension, comfortable driver's seat, air-sprung and heated, with lumbar support and shoulder adjustment, fire suppression system, rocker arm brake, EVBec controlled, heated air dryer, auxiliary heater Eberspächer D4S, emergency battery switch, rotating beacon (2), exterior sun visor, sound system, 12V and 24V socket in the cab, control module for fleet management system, door extension for the cab, additional long-range/fog lights with cornering light Redezv Au Hopfx Ahcscf Additional equipment: Axle configuration: 4x2, ambient lighting, approach/front mirror, trailer socket 24V / 7-pole, anti-slip regulation (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, MAN-Tronic on-board computer, electronic braking system MAN-Brakematic, EURO 6 engine, cab: with Nordic insulation, cab: XXL, suspension: air / air (full air), electric windows, remote control central locking, tinted windshield, generator 28 V 80 A, transmission 16-speed - type: ZF 16 S, body/superstructure: semi-trailer tractor, rocker arm brake, EVB, automatic climate control, fuel filter, heated, fuel tank: combination tank - 400 liters diesel + 60 liters urea solution (AdBlue), multifunction steering wheel, raised air intake, air compressor 1-cylinder 360 ccm, engine 12.4 liters - 338 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side-mounted spare wheel jack, fifth wheel coupling: Jost JSK 37 C, disc brake, rear axle, disc brake, front axle, tinted rear side windows, seat cover / upholstery: comfort quality, sun visor, side window, driver's door, spray mist reduction, stabilizer on one rear axle, storage box accessible from the outside, control type cab, TGX, door windows tinted, front underrun protection, viscous fan, central locking, permissible total weight 18.00 t The truck is in good condition! Service booklet up to 571,789 km!

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: Rcsdszvz Tbspfx Ahcjf A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: new, Year of construction: 2026, The Josan S21 is a compact, robust, and powerful wheel loader with full equipment at an attractive price. With a lifting capacity of approximately 1,200 kg and a low overall height, it is ideally suited for low entrances, halls, stables, and farm work. Despite its compact design, the S21 features a spacious full cab with heating and ventilation. With an unladen weight of only approximately 2,200 kg, the wheel loader remains comparatively light and can be easily transported on a suitable trailer. The wide cab provides comfortable working conditions and good all-around visibility. ‼️ IN STOCK ‼️ AVAILABLE FOR ON-SITE INSPECTION ‼️ OUR COMPONENTS ✅ Nationwide FREE delivery to your farm! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier that also sells to high-end wheel loader manufacturers. This ensures sensitive and precise raising and lowering of the pallet fork. Feel free to test it on our premises! ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc., are treated in this way. This provides extreme rust protection, which is INCLUDED! ✅ NEW! Larger luxury cab for more legroom. With reinforced steel, we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight ✅ NEW! LIFTING CAPACITY approx. 1200 kg! ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* Rcedpfx Asufwyzohcof ✅ Nationwide service by experts in our own workshop ✅ We stock all spare parts in Gemmrigheim. This allows us to ship parts within 24 hours. ✅ We have our own factory in China! ✅ Continuous monitoring during the production process ensures very high quality. ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe). Technical data: ➡️ Unladen weight ONLY approx. 2200 kg ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): approx. 4200 x 2200 x 1600 mm ➡️ Euro 5 engines ➡️ All-wheel drive ➡️ Cab width approx. 1.25 m ➡️ Internal cab height approx. 1.35 m ▶️ Tipping height approx. 2.85 m ➡️ New with large comfort cab (internal width approx. 1.10 m) ➡️ Articulated steering ➡️ Adjustable steering column ➡️ Large all-round view ➡️ Hydraulic oil cooler ➡️ UVV NEW 1 year ▶️ Additional control lever to regulate the tilting speed of the bucket/fork ➡️ Automatic engagement of creep and fast speed ▶️ 2-stage torque converter transmission, electrically controlled ➡️ Electric joystick for forward and reverse movement with thumb on the joystick ➡️ Wide tires 31/15.5/15 AS profile (Note: only the narrow tires are shown in the picture) ➡️ 3rd and 4th control circuits with separate small joysticks ➡️ Float function ➡️ Safety belt ➡️ Bucket Optional: ➡️ AVAILABLE IMMEDIATELY! Combined pallet fork with attachment and tines (We have 1.20m tines and two spears, length approx. 90cm) ➡️ Euro attachment with hydraulic locking pins ‼️ We also have a wide range of accessories, from bale clamps and crocodile jaws to snow plows! Just ask. Net price €12,999.00 +19% VAT €2,469.81 Gross price €15,468.81 Errors and omissions excepted Images/text may vary *Please inquire about our warranty conditions.

Condition: reconditioned (used), functionality: fully functional, power: 42.4 kW (57.65 HP), fuel type: diesel, overall weight: 7,065 kg, Year of construction: 2020, operating hours: 2,350 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, programmable additional control circuit with proport. control + AB, programmable additional circuit with proport. control, additional circuit for hydr. quick coupler, programmable additional circuit with proport. Control (electric power tilt changeover) Auxiliary hydraulics installed up to the dipper arm with high pressure shut-off valves, automatic speed reduction system, electric refueling pump, Rjdst I Tp Sepfx Ahcscf Load holding valve on the lift, stick and adjustment cylinders, overload warning device + pipe breakage protection, ROPS comfort cab, radio, automatic air conditioning, air-sprung driver's seat, key system for all locking functions, Load sensing hydraulic system, automatic hydraulic track tensioning, 400 mm rubber tracks, Adjustable boom: hydr. SW Lehnhoff HS 08 incl. attachment kit, original Powertilt 174° slewing with load hook, electr. grapple changeover

Condition: used, mileage: 46,000 km, power: 175 kW (237.93 HP), first registration: 09/2011, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 4x4, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 3,450 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: all wheel drive, cabin, differential lock, trailer coupling, Vehicle location: en route / in transit, abbreviation: Haus, 1 air seat, rear window, electric mirrors, heated mirrors, differential lock, rotating beacon, leaf spring suspension, trailer hitch (air-light-hydraulic), winter service equipment, green environmental badge. Body: Municipal equipment with tipper, ARCHIVE PHOTO! ADDITIONAL GEARBOX WITH WORKING GROUP, ENGINE PTO INCLUDING FRONT PTO, HEATED WINDSCREEN, Rcedpjzvhhxjfx Ahcof long wheelbase, municipal hydraulics, front mounting plate, PTO, reversing camera, cab protection grille, snow chains, New parts in 2025: dosing device for AdBlue system, regeneration tank for air dryer, control valves for front and rear axles of the braking system, brake force regulator, four-circuit protection valve. All information without guarantee, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition Rsdpfx Ajdz Srbohcscf 2 units available, price per unit

Condition: new, Year of construction: 2024, overall weight: 2,600 kg, fuel type: diesel, tank capacity: 450 l, color: red, power: 120 kW (163.15 HP), output current: 220 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, total length: 3,600 mm, total width: 1,200 mm, total height: 2,100 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, Diesel generator set, 150 kVA Generator type: C150SSF Condition: New, 2024 Application: stationary Engine: Cummins 6BTAA5.9-G12 Generator: Leroy Somer LSA 44.3 L10 Rcjdpfxofxlc Sj Ahcof Rated power: 165 kVA / 132 kW Continuous power: 150 kVA / 120 kW Rated voltage: 230/400 V Rated frequency: 50 Hz Speed control: electric Voltage regulation: electric (AVR) Soundproofed (68 dB / 7m), weatherproof Control voltage: 24VDC Grid type: TN-C Includes control panel Includes batteries (2 x 110Ah) Includes batteries including battery switch Includes integrated fuel tank (500 L) Includes integrated drip tray for fuel and engine fluids Includes documentation/manual Includes circuit breaker (ABB, 4P) Manufactured in Germany Warranty: 12 months or 2000 operating hours, whichever comes first. You can configure your generator set individually with us and order numerous optional features: - Socket package 16A - 125A with RCD (residual current device) - Remote control - Insulation monitoring - Enhanced sound insulation, up to 55 dB/7m possible - Fully automatic automatic transfer switch (ATS) with automatic mains-generator changeover available on request. - Parallel operation with load distribution and peak load management (ComAP IG 1000 control system, VDE 4510 certified) - CHP (combined heat and power) version - ATS for indoor installation with air ducts, supply and exhaust ventilation, etc. The images show a standard series generator set with the corresponding power output from our own production, fully operational. Delivery throughout Germany possible for an extra charge. Contact us by email or call us, we will be happy to advise you.

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Rodoyuchxopfx Ahcscf Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Rcedpfx Asxv D T Rehcsf Configuration 1. BodorPower 12 kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed with tenon-and-mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch touchscreen monitor 10. Automatic cutting gas pressure adjustment 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-searing mineral cast 14. Bodor Mango® ergonomic remote control 15. Gas-saving nozzles with stable flow 16. Smart maintenance reminder 17. Wi-Fi internet connection 18. Water cooling 19. Exhaust system 20. Wear parts kit CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm Total machine rated power: 52.2 kW Total machine rated current: 99.1 A Average power consumption: 29.8 kWh OPTIONAL: LANTEK EXPERT II CUT software, including post-processor

Condition: ready for operation (used), Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible. Rjdpfx Aszukrwohcecf

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Rodpfjzi Tmaox Ahcecf Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: new, Hydraulic plate shear Fintek Type/Model: TS 2080 x 6.5 Condition: New Exclusive: Trade fair machine EURO-Blech Hannover 2026 Compact hydraulic plate shear, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the positioning and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving the hands free to align the workpiece. Technical data Cutting length: 2080 mm Sheet thickness: 6.5 mm Strokes/min: 24 - 36 Number of clamps: 12 Clamp pressure: 5.6 t Front support arms: 1000 mm Rear stop: 600 mm Cutting angle: 1/2 - 2° Motor power: 11 kW - High-quality, high-alloy shear blades with a high chromium content, suitable for stainless steel - Upper blade 2-edged, lower blade 4-edged - Hydraulic cutting angle adjustment ensures a clean, low-distortion and precise cut at any sheet thickness - Manual cutting gap adjustment (models from 4.5 mm and larger) - Excellent visibility of cutting lines via LED with shadow projection - High number of strokes per minute ensures fast operation - Generous support arms with adjustable stop - Side stop with double scale (metric/imperial) - Feed work table with ball rollers for effortless movement of the sheet - Continuous front guard - Hydraulic, independent clamps ensure perfect clamping of the sheet at all times, regardless of the degree of wear of the clamps, by applying the same pressure (no slippage or dragging of the sheet during cutting) - Manual rear stop 600 mm - Overload-protected hydraulic system - Mobile control panel with safety foot switch and emergency stop button - High performance and reliability - Various options available, e.g. small parts diverter, NC-controlled rear stop with intuitive control via touch screen, angle stop, sheet lifting device, etc. - Current CE conformity Options: - Pneumatic sheet lifting device with: - Selector switch for sheet return on the operator side or the rear of the machine - Integrated rollers for even and smooth removal of the cut material - Increased motor power for more strokes/min - Rear stop with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) Rsdszh Uuijpfx Ahcscf - Angle stop with scale - NC rear stop 800 mm controlled via ball screw using M15S or FATEK control Inquiry item! Shipping costs in individual offer.

Condition: excellent (used), Available quantity: 10 units. High-quality control cabinet cooler from Rittal, part of the TopTherm series, in very good condition (used). This unit is suitable for reliable air conditioning and cooling of control cabinets and industrial equipment. Robust industrial design with a high degree of protection and powerful cooling technology. Manufacturer: Rittal Model: TopTherm SK 3304540 Device type: Control cabinet cooler Condition: very good, used Date of manufacture: 10/2018 Rcjdpfx Ahjzgf Hajcef Serial number: 2018K000166679 Voltage: 400 V / 50 Hz / 3~ Alternative voltage: 460 V / 60 Hz / 3~ Rated current: 2.2 A Starting current: 11.5 A Circuit breaker: 6.3 – 10 A Power consumption: 0.64 kW Total cooling capacity DIN EN 14511: 1.10 kW Sensible cooling capacity DIN EN 14511: 0.94 kW EER L35 L35: 1.72 Refrigerant: R134a Refrigerant charge: 325 g GWP R134a: 1430 CO2e: 0.46 t Operating temperature range: 10 °C to 55 °C Degree of protection internal circuit: IP54 Degree of protection external circuit: IP34 Weight: 40 kg Hermetically sealed: Yes Leakage tested according to EN-378-2

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, overall weight: 9,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0403, EDDY CENTRIC combines an iron and non-ferrous metal separator and offers an efficient and compact way to separate metals from a material stream at the highest throughput rates. A combination of a robust and powerful drum magnet separator for separating ferrous metals (nails, screws, etc.) and a centric eddy current separator for separating non-ferrous metals (aluminum, copper, brass, etc.) allows for the production of three marketable fractions in a single processing step. This module is part of our rental fleet. Rcsdpszfy R Defx Ahcsf

Condition: used, Year of construction: 2016, operating hours: 7,889 h, 2016 | Volvo EW60E with 5 buckets | Used Wheeled Excavator | 7889 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 31900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 58 inspection points 54 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition and operation. Offset boom, 5 buckets. The injectors have been redone by Volvo a few hundred hours ago. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "36715 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Redpfjzhk Ufex Ahcocf 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 339,421 km, power: 175 kW (237.93 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 8,740 mm, loading space width: 2,500 mm, loading space height: 2,080 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, Mercedes-Benz Atego box 1224 8.74 m long * May 3, 2017 * 339,421 km * Front axle, 5.3 t * Rear axle, crown gear 390, hypoid, 11.0 t * Differential lock rear axle * Axle ratio i = 3.909 * Electronic braking system with ABS and ASR * Electronic compressed air supply unit, low * Heating, electronic compressed air supply unit * Disc brake, on front and rear axles * Condensate monitoring, for compressed air system * Wheelbase 5360 mm * Fastening parts, for flatbed * Steering ZF 8095 * Stabilizer, under frame, rear axle * Front underrun protection (ECE), steel * Protection device, side * Splash guard, in fender * Frame overhang extended, 200 mm * Elimination of rear underrun protection (ECE) * Driver's suspension seat, comfort * Passenger's fixed seat, single * Armrests, both sides, driver's seat * Seat cover, velour, driver's seat * Seat cover, velour, passenger's seat, middle seat * Classic cockpit * Electric windows, both sides * Air conditioning * Pollen filter * Storage, above windscreen, 1 compartment * Storage, high, on engine tunnel * Roof hatch/roof ventilation flap * Battery cover * Batteries, 2 x 12 V/165 Ah, low-maintenance * Generator 28 V/100 A * Circuit breakers * Additional socket 12 V/15 A, parapet * Switch no. 1 for external body electrics * Cable remote control for air suspension * Preparation for tail lift control * Sun visor outside, transparent * Front mirror, heated * Main mirror, electric, driver's side * Cab entrance, two-stage * Immobilizer, with Transponder * Gearbox G 90-6/6.70-0.73 * Tires tubeless, 265/70 R 19.5 VA * Wheel formula 4x2 * 12.0-tonner * Flatbed chassis * Light series, new generation up to 21 t * Light vehicles up to 21 t * Air suspension, rear axle * Instrument cluster, 10.4 cm * Tachograph manufacturer VDO * Digital tachograph, EC, speed, without ADR * CD radio, Bluetooth * FleetBoard Eco Support * Preparation for toll collection * Wheelbase 5660 mm * Plastic tank 180 l, left * AdBlue tank 25 l * Tanks, lockable * Fog lights, halogen * Work lights maneuvering aid * Engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm M5M engine version Euro VI, with OBD-C Redpfxepcdr Ts Ahcjcf * Engine brake, standard system * ENGINE BRAKE PERFORMANCE STANDARD * Tail lift package * Front spring, 5.1 t, parabola * Cross member, retrofitted AHK G145 ZAA R0Z wheel nut cover * Steep shoulder rims 6.75 x 19.5 * Spare wheel jack, side * Stability control assistant (ESP) * Lane keeping assistant * Active Brake Assist * Speed limiter 90 km/h / 56 mph, ECE S5Z cruise control * All information without guarantee

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; Rsdpfx Ahsp Stgnocscf - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Rcedpfx Asim R A Iehcof Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2026, Large-scale welding robotic systems High-dynamic robotic, multi-axis automated welding system. KBWELD HDC is a console-type linear-drive system with a robust construction with precision guides. It achieves high speed and accuracy thanks to digital servo-controlled motors. KBWELD HDC6 has a wide range of applications - complex, ribbed beams with slopes, panels, boards, ribbed sections; For straight and circular seams, various building elements, machine housings and more. Number of axes (all in interpolation) - 6 Axis type - 3 linear and 3 rotary for torch Motor type - AC, servo synchronous motors Motion principle - Rack and pinion on linear axes, high precision cycloid reducers on rotary axes Longitudinal stroke (along the rail) - on request Transverse stroke - Y axis - 2000 - 4000 mm Vertical stroke - 1500 - 2500 mm Rotation range around Z-axis +/- 360 ° Range of torch tilting angle +/- 90 ° Linear axes speed range 0 – 30 000 mm/min Rotary axes speed range 0–120°/s Rcedpfx Ahoh Imyascef Positioning accuracy +/-0.3 mm/m Repeatability +/-0.1 mm Supply voltage 3-phase, 380V +/-10%, 50Hz Nominal consumption 3.5 kW PROCESS MANAGEMENT • A library of settings that includes all parameters • Welding speed, power source parameters • Ability to change the welding mode during welding • Arc start delay • Delay of motion at the arc end for the crater filling time • Separate control of arc burning times and cold wire feed in TIG process • Weaving function with frequency and amplitude adjustment • Seam (part) search function with touch sensing with wire , gas nozzle or other sensor • Seam tracking through arc current and weaving motion ▲ WELDING EQUIPMENT OPTIONS: 450A KEMPPI A7 - PULSED MIG/MAG WELDING - Full welding parameters robot control Mains connection voltage 3~ 50/60 Hz 400 V, -15 …+20 % Supply current (maximum) 32 A Supply current (effective) 25 A Fuse (delayed) 35 A No-load voltage (peak) U0 = 80 V – 98 V Open circuit voltage (average) 85 V – 103 V Operating temperature rang -20…+40 °C Degree of protection IP23S Efficiency (100 % duty cycle) 87 % Power factor at max. current 0.88 OR ▲ TANDEM (TWIN-WIRE) WELDING MIG/MAG EQUIPMENT 2 x 450A KEMPPI A7 - Full robot control ▲ ROBOTIC PERIPHERALS OPTION: 1-axis Servo-positioners - payload on request from 500 to 6000kg 2-axis Servo-positioners - payload on request from 250 to 2000kg DESCRIPTION KBSPOS500 Payload 500 kg Number of axes 1 Type of motor AC, servo Max Torque 860 Nm Max Load inertia 100 kgm2 Max Speed 70°/sec Flange diameter 400 mm DESCRIPTION 2-axis Servo-positioner KBS2AxPos 500 Number of axes 2 Type of motor AC, servo Payload 500 kg Max Torque Axis 1 1700 Nm Max Load inertia Axis 1 400 kgm2 Max Speed Axis 1 30°/sec Max Torque Axis 2 860 Nm Max Load inertia Axis 1 100 kgm2 Max Speed Axis 1 70°/sec Flange diameter 400 mm ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 10 days

Condition: as good as new (ex-display), Reliable transmission of machine data, process parameters, and diagnostic data to the controller. For connecting up to eight IO-Link devices. Two Ethernet ports with integrated switch. Integrated web server for configuration and diagnostics. Simultaneous data exchange with the controller and the IT environment. Technical data: Application area Application: I/O modules for use in the control cabinet. Electrical data Operating voltage [V]: 18...30 DC Nominal voltage DC [V]: 24 Max. power consumption [VA]: 2.4 Total current load [A]: 2 Inputs/Outputs Total number of inputs and outputs: 20 Number of inputs and outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs: 18; (8 x 2 + 2 x 1) Input circuit digital inputs: PNP Voltage supply [V]: 24 Max. total current load inputs [mA]: 1600 Input current limitation [mA]: 200 Short-circuit protection digital inputs: yes Short-circuit resistance digital inputs: yes Overload resistance digital inputs: yes Outputs Number of digital outputs: 10 Circuit: PNP Current load per output [mA]: 200 Short-circuit protection: yes Galvanically isolated: no Actuator supply of the outputs: 24 V DC Interfaces Communication interface: IO-Link Ethernet Transmission rate: 10; 100 Protocol: EtherNet/IP; Modbus TCP IO-Link Master Transmission type: COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision: 1.1 SDCI standard: IEC 61131-9 Number of Class A ports: 8 Environmental conditions Ambient temperature [°C]: 0...70 Storage temperature [°C]: -20...70 Max. permissible relative humidity [%]: 95 Protection class: IP 20 Approvals / Tests Shock / Vibration test: EN60068-2-6; EN60068-2-27 Mechanical data Rsdoh N U Suepfx Ahcscf Weight [g]: 404.5 Dimensions [mm]: 105.3 x 45.2 x 113.6 Materials: Housing: PA Indicators / Controls Display: Switching state: LED, yellow Operation: LED, green Error: LED, red Function: LED, yellow Remarks Packaging unit: 1 piece Electrical connection Screw terminals: ; Pitch: 20 mm