Used Rcbos (Residual Current Circuit Breaker With Overload Protection) for sale (20,624)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Nsdpfx Aszu Avzsf Uewk Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, Year of construction: 2026, General information Field of application: Construction Weights Empty weight: 1.900 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Njdpfx Afsqmnbwo Uowk Visual appearance: very good Other information Fits to following machines: 18~28ton excavator Working pressure: 320 bar Cutting power: 320 kN Required hydraulic flow: 180 l/min Additional information Please contact Ö. Inalkac for more information AJCE Europe APL20RV pulverizer with hydraulic rotation is a top quality product. APL20RV pulverizer/crusher is 1850kg and fits on 18~28ton excavator. APL20RV pulverizer/ crusher has changable tooth plate and has also speed up valve. Contact us for details. concrete crusher/ Pulverizer/ broyeur/ cisaille/ HYDRAULISCHE BETONPULVERISIERER/ MEHRZWECKSCHEREN/ ABBRUCHSCHEREN/ TRITURADOR DE HORMIGÓN HIDRÁULICO/ TRITURADOR DE HORMIGÓN/ CIZALLA DE DEMOLICIÓN/ DRVICE/ ABBRUCHZANGE/ PULVERISIERER

Condition: new, Year of construction: 2026, The Josan S21 is a compact, robust, and powerful wheel loader with full equipment at an attractive price. With a lifting capacity of approximately 1,200 kg and a low overall height, it is ideally suited for low entrances, halls, stables, and farm work. Despite its compact design, the S21 features a spacious full cab with heating and ventilation. With an unladen weight of only approximately 2,200 kg, the wheel loader remains comparatively light and can be easily transported on a suitable trailer. The wide cab provides comfortable working conditions and good all-around visibility. ‼️ IN STOCK ‼️ AVAILABLE FOR ON-SITE INSPECTION ‼️ OUR COMPONENTS ✅ Nationwide FREE delivery to your farm! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier that also sells to high-end wheel loader manufacturers. This ensures sensitive and precise raising and lowering of the pallet fork. Feel free to test it on our premises! ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc., are treated in this way. This provides extreme rust protection, which is INCLUDED! ✅ NEW! Larger luxury cab for more legroom. With reinforced steel, we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight ✅ NEW! LIFTING CAPACITY approx. 1200 kg! ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by experts in our own workshop ✅ We stock all spare parts in Gemmrigheim. This allows us to ship parts within 24 hours. ✅ We have our own factory in China! ✅ Continuous monitoring during the production process ensures very high quality. ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe). Technical data: ➡️ Unladen weight ONLY approx. 2200 kg ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): approx. 4200 x 2200 x 1600 mm ➡️ Euro 5 engines ➡️ All-wheel drive ➡️ Cab width approx. 1.25 m ➡️ Internal cab height approx. 1.35 m ▶️ Tipping height approx. 2.85 m ➡️ New with large comfort cab (internal width approx. 1.10 m) ➡️ Articulated steering ➡️ Adjustable steering column ➡️ Large all-round view ➡️ Hydraulic oil cooler ➡️ UVV NEW 1 year ▶️ Additional control lever to regulate the tilting speed of the bucket/fork ➡️ Automatic engagement of creep and fast speed ▶️ 2-stage torque converter transmission, electrically controlled ➡️ Electric joystick for forward and reverse movement with thumb on the joystick ➡️ Wide tires 31/15.5/15 AS profile (Note: only the narrow tires are shown in the picture) ➡️ 3rd and 4th control circuits with separate small joysticks ➡️ Float function ➡️ Safety belt ➡️ Bucket Nedpfxeufwyze Af Uswk Optional: ➡️ AVAILABLE IMMEDIATELY! Combined pallet fork with attachment and tines (We have 1.20m tines and two spears, length approx. 90cm) ➡️ Euro attachment with hydraulic locking pins ‼️ We also have a wide range of accessories, from bale clamps and crocodile jaws to snow plows! Just ask. Net price €12,999.00 +19% VAT €2,469.81 Gross price €15,468.81 Errors and omissions excepted Images/text may vary *Please inquire about our warranty conditions.

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, power mirror, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Catalytic converter - Refrigerator - Air suspension - Air-suspended seats - Particle filter - PTO - Radio/Multimedia system - Rotating beacon - Rear view camera - Disc brakes - Sunroof - Seat heating - Sun visor - Lane keeping assist - Stability control - Toolbox - Additional steering axle Internal number for customer inquiries: 5-052 / Immediately available!!! MAN TGS 26.440 6x2H-4 BL 3-sided tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: FASSI F195A.2.24 e-dynamic Lifting moment 162 kNm (16.51 mt) Hydraulic four-stage extension 12.7 m e-dynamic hose system for 2 additional devices Slewing angle 400° Double-knee lever system with PROLINK (over-extension of the knuckle arm up to 15°) Electronic overload protection system with FX 500 FASSI stability control FSC including LMB II Fassi RCS radio maxi - 6 functions with 3 joysticks (2-2-2) Special outriggers, outrigger width 6.64 m hydraulically extendable including FSC Outriggers can be operated via radio FL system (Full Lift) switchable fast gear valve for the extensions Nsdpeylx Hljfx Af Ujwk LED work light Vehicle: Diesel engine MAN D2676 LFAJ, 324 kW (440 hp) output, 2,200 Nm torque, Euro 6e Automatic transmission MAN TipMatic 12.24 OD 6x2H-4 MAN HydroDrive, hydrostatic drive of the front axle Wheelbase 3,600+1,350 mm Suspension leaf/air Trailer coupling RINGFEDER 40mm Type 4040/G150A (Alternatively with surcharge ø50mm) 2-line trailer brake connection, DuoMatic coupling 390 l fuel tank volume, 60 l AdBlue tank volume High-performance engine brake MAN Turbo EVBec, adjustable Differential lock driven rear axle Tag axle, 9,000 kg, not driven, straight, steerable, liftable Preparation for 2 cameras, one camera linked to reverse gear Cab NN: the practical one (narrow, medium length, normal height) Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating Sun visor windshield, inside, electric Cool box Control panel MAN EasyControl, 4 functions, can be operated from the outside when the door is open MAN Media System Navigation Professional 12.3 inches MAN Sound System Advanced Superstructure: Three-sided tipper body with crane mounted directly behind the cab Bed: Dimensions LxWxH 4,800 mm x 2,420 mm x 800 mm (Alternatively also available: Load area length 5,200 mm x 2,420 mm x 800mm) Front wall 1,000 mm high Special equipment: - Rear corner pillars fixed - Lifting aids for the side walls - Eight lashing eyes recessed on the left and right in the floor (4 per side) - Hydraulic crane/tipper/trailer can be switched over via a valve in the cab - Positioning of the underrun protection, the rear lights and the supply lines on the left - Central locking for opening the lower locks, pneumatically controlled in the cab - 2-circuit trailer tipping hydraulics Financing / hire purchase, as well as leasing / partial depreciation leasing is possible with...

Condition: used, mileage: 46,000 km, power: 175 kW (237.93 HP), first registration: 09/2011, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 4x4, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 3, loading space length: 3,450 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: all wheel drive, cabin, differential lock, trailer coupling, Vehicle location: en route / in transit, abbreviation: Haus, 1 air seat, rear window, electric mirrors, heated mirrors, differential lock, rotating beacon, leaf spring suspension, trailer hitch (air-light-hydraulic), winter service equipment, green environmental badge. Body: Municipal equipment with tipper, ARCHIVE PHOTO! ADDITIONAL GEARBOX WITH WORKING GROUP, ENGINE PTO INCLUDING FRONT PTO, HEATED WINDSCREEN, long wheelbase, municipal hydraulics, front mounting plate, PTO, reversing camera, cab protection grille, snow chains, New parts in 2025: dosing device for AdBlue system, regeneration tank for air dryer, control valves for front and rear axles of the braking system, brake force regulator, four-circuit protection valve. All information without guarantee, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Nsdpfx Aszvhhxsf Uswk

Condition: new, Year of construction: 2024, overall weight: 2,600 kg, fuel type: diesel, tank capacity: 450 l, color: red, power: 120 kW (163.15 HP), output current: 220 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, total length: 3,600 mm, total width: 1,200 mm, total height: 2,100 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, Diesel generator set, 150 kVA Generator type: C150SSF Condition: New, 2024 Application: stationary Engine: Cummins 6BTAA5.9-G12 Generator: Leroy Somer LSA 44.3 L10 Nwsdpfxefxlc Ss Af Ujk Rated power: 165 kVA / 132 kW Continuous power: 150 kVA / 120 kW Rated voltage: 230/400 V Rated frequency: 50 Hz Speed control: electric Voltage regulation: electric (AVR) Soundproofed (68 dB / 7m), weatherproof Control voltage: 24VDC Grid type: TN-C Includes control panel Includes batteries (2 x 110Ah) Includes batteries including battery switch Includes integrated fuel tank (500 L) Includes integrated drip tray for fuel and engine fluids Includes documentation/manual Includes circuit breaker (ABB, 4P) Manufactured in Germany Warranty: 12 months or 2000 operating hours, whichever comes first. You can configure your generator set individually with us and order numerous optional features: - Socket package 16A - 125A with RCD (residual current device) - Remote control - Insulation monitoring - Enhanced sound insulation, up to 55 dB/7m possible - Fully automatic automatic transfer switch (ATS) with automatic mains-generator changeover available on request. - Parallel operation with load distribution and peak load management (ComAP IG 1000 control system, VDE 4510 certified) - CHP (combined heat and power) version - ATS for indoor installation with air ducts, supply and exhaust ventilation, etc. The images show a standard series generator set with the corresponding power output from our own production, fully operational. Delivery throughout Germany possible for an extra charge. Contact us by email or call us, we will be happy to advise you.

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Nwedpfx Aoulc Sqof Ujk Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 1 x N&N Nadratowski / Orbmix twin-shaft mixer grinder with tote bin tipper/column loader. Supplied with various hole plates. Suitable for a variety of products including meat, poultry, fish, vegetables, petfood, sandwich fillings, etc. Manufacturer - N&N Nadratowski. Model - MG-450/160. Date of manufacture - 2011. Mixing capacity - 450 litres (approx 350 litres of product). Output - up to 2,000 kg/h, depending on product. Nwedpswplc Asfx Af Usk Electric supply - 400 V / 50 hz / 3 phase. Power - 24 kW. Weight - 1530 kg (mixer grinder) and 282 kg (column loader). Previous use - for mixing and grinding a poultry and vegetable mixed product.

Condition: new, color: other, Field of application: Mining We produce, mobile, primary, primary - secondary or tertiary, impact - crushers. On a trailer, with a hopper, belts, grizzly or wooble feeder, to separate clay and earth from the rock. It can also be a combination of crushers + screen, sieve, with two, three or four deck_ DRY PROCEDURE or WET PROCEDURE. The final products are tampons: 0-30 mm, 0-60 mm or 0-100 mm or asphalt-construction fractions; 0/4, 4/8, 8/11, 11/16, 8, / 16, 16/22, 16/32 mm. The plant is used for work in soft and medium hard rock. Technology has advanced, today they can crush impact crushers even in difficult working conditions. On a tertiary impact crusher in difficult working conditions, the impact hammers can be pre-shredded Njdjx D Dcbjpfx Af Uewk up to 40,000 m3 of gravel or eruptive stone. The power supply of the plant is via a cable, from a transformer station or via a generator. The size of the plant will depend on the project inquiry . ----- ----- ----- Mining crushing plants are offered, on a trailer; jaw crushers, cone crushers, vertical crushers, all types of separations, DRY PROCEDURE and WET PROCEDURE, with washing. ----- ----- ----- The warranty on the plants is 2 years. We provide service, all spare parts. ----- We offer all technical support on the issue of how correct and economically justified work out some quarry !! Many years of professional experience in surface exploitation in quarries, open pit, of mineral resources.

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) Nsdpfx Afodz Srbe Uowk - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: used, mileage: 625,000 km, power: 338 kW (459.55 HP), first registration: 04/2019, fuel type: diesel, overall weight: 18,600 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Special equipment: Exterior mirrors and wide-angle mirrors, electrically adjustable and heated, battery 225 Ah, comfortable co-driver's seat, air-sprung and heated, with lumbar support and shoulder adjustment, front bumper trim, chrome-plated, curb mirror on the right, electrically adjustable and heated, roof antenna for CB radio, differential lock, rear axle, air horns on the cab roof (2), ETA circuit breaker, cab: with air suspension, comfortable driver's seat, air-sprung and heated, with lumbar support and shoulder adjustment, fire suppression system, rocker arm brake, EVBec controlled, heated air dryer, auxiliary heater Eberspächer D4S, emergency battery switch, rotating beacon (2), exterior sun visor, sound system, 12V and 24V socket in the cab, control module for fleet management system, door extension for the cab, additional long-range/fog lights with cornering light Nwedjzv Au Hjpfx Af Ujk Additional equipment: Axle configuration: 4x2, ambient lighting, approach/front mirror, trailer socket 24V / 7-pole, anti-slip regulation (ASR), audio system: MAN Media Truck Advanced 12V radio with navigation system preparation, MAN-Tronic on-board computer, electronic braking system MAN-Brakematic, EURO 6 engine, cab: with Nordic insulation, cab: XXL, suspension: air / air (full air), electric windows, remote control central locking, tinted windshield, generator 28 V 80 A, transmission 16-speed - type: ZF 16 S, body/superstructure: semi-trailer tractor, rocker arm brake, EVB, automatic climate control, fuel filter, heated, fuel tank: combination tank - 400 liters diesel + 60 liters urea solution (AdBlue), multifunction steering wheel, raised air intake, air compressor 1-cylinder 360 ccm, engine 12.4 liters - 338 kW diesel, engine compartment encapsulation, wheelbase 3600 mm, side-mounted spare wheel jack, fifth wheel coupling: Jost JSK 37 C, disc brake, rear axle, disc brake, front axle, tinted rear side windows, seat cover / upholstery: comfort quality, sun visor, side window, driver's door, spray mist reduction, stabilizer on one rear axle, storage box accessible from the outside, control type cab, TGX, door windows tinted, front underrun protection, viscous fan, central locking, permissible total weight 18.00 t The truck is in good condition! Service booklet up to 571,789 km!

Condition: good (used), Year of construction: 2018, cooling capacity: 19.7 kW (26.78 HP), type of input current: three-phase, type of cooling: air, overall weight: 316 kg, input voltage: 400 V, total width: 700 mm, total length: 1,600 mm, total height: 1,400 mm, warranty duration: 6 months, AIRCOOLED CHILLER Galletti MPE 019 C0 AB CAT2 19,7 KW Cooling capacity: 19,7 kW / 56 tons (12/7 — 35°C) Hydraulic module: 1 pcs. water pump (LOWARA CEAM70/3/A), expansion vessel Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Hydraulic module Condenser: Copper-aluminum Type of refrigerant: R410a Compressors: 1 pcs. Copeland ZP91KCE-TFD-522 (scroll) Number of fans: 4 psc. Dimensions: 1.6х0.7х1.4 m. Weight: 316 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Nwedpfeufr Igjx Af Uek WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Alternative names used in European markets: Kaltwassersatz (DE), Gruppo frigorifero industriale (IT), Groupe froid industriel (FR), Chiller wody lodowej (PL), Agregat frigorific (RO), Enfriadora industrial (ES). This unit is listed in English for international buyers.

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces Nsdpfxsyuchxe Af Uswk 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Configuration 1. BodorPower 12 kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed with tenon-and-mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch touchscreen monitor 10. Automatic cutting gas pressure adjustment 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-searing mineral cast 14. Bodor Mango® ergonomic remote control 15. Gas-saving nozzles with stable flow 16. Smart maintenance reminder 17. Wi-Fi internet connection 18. Water cooling 19. Exhaust system 20. Wear parts kit CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm Nodjxv D T Rjpfx Af Uowk ALUMINUM 25 mm Total machine rated power: 52.2 kW Total machine rated current: 99.1 A Average power consumption: 29.8 kWh OPTIONAL: LANTEK EXPERT II CUT software, including post-processor

Condition: ready for operation (used), Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible. Nsdpfxozukrwj Af Ujwk

Condition: excellent (used), Auxiliary circuit breaker, miniature circuit breaker, fuse, circuit breaker, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector Nwsdpfjyg Ecisx Af Ujk -Manufacturer: wöhner, NH-Reiter fuse base with touch protection, unused, original packaging -Type: NH Gr. 3 630 A -Quantity: 1x box with 3 sets available -Cardboard dimensions: 260/215/H130 mm -Total weight: 0.7 kg

Year of construction: 2015, condition: used, MultiWeigh MW 16 Head Combination Weigher – High Accuracy | Fully Complete | High speed machine with memory buckets We offer this MultiWeigh MW 16-head combination weigher, manufactured by HD-Wiegetechnik Sondermaschinen GmbH (Germany). MultiWeigh is globally recognized for precision weighing technology, reliability, and long service life in the food processing industry. This machine is fully complete, in good working condition, and supplied including collecting chute, making it ready for immediate production use. Technical Specifications - Manufacturer: MultiWeigh (HD-Wiegetechnik Sondermaschinen GmbH) - Machine Type: MW 16 2.01 57° 3 MIX - Number of Weighing Heads: 16 with memory buckets (high speed) - Control System: IPC 511 - Scale Interval (d): 1.0 g - Scale Interval (dw): 5.0 g - Operating Temperature Range: 0 – 45 °C - Year of Manufacture: Certification: CE marked ----- Capacity (depending on product & target weight) - Up to ±120 weighments per minute - High speed and accuracy depending on: Typical products include: - Meat & poultry portions - Cheese blocks or cubes - Frozen IQF products - Snacks & confectionery - Fresh and processed food products ----- Condition & Scope of Supply - Good working condition - Fully complete - Supplied with collecting chute - Robust stainless-steel construction - Easy to clean and maintain - Suitable for integration into existing packaging lines ----- Key Advantages - Proven German engineering - High weighing accuracy - Flexible for a wide range of products - Reliable IPC-based control system - Ideal for food processors seeking performance and durability ----- Availability - Available directly from stock - Machine can be inspected under power by appointment Nedpfx Ajx Synfjf Uswk - Worldwide delivery possible Offered by STC Food Solutions – Used Food Processing & Packaging Machinery Contact us for pricing, lead time, videos, or additional technical information. ----- Keywords MultiWeigh combination weigher, MultiWeigh MW 16, 16 head weigher, used multihead weigher, food weighing machine, combination scale, packaging line weigher, German multihead weigher, meat weighing machine, cheese weigher * Manufacturer: MultiWeigh (HD-Wiegetechnik Sondermaschinen GmbH) * Year of Manufacture: / * Certification: CE marked

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 295.6 kW (401.90 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,453 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,200 mm, total height: 1,880 mm, warranty duration: 12 months, Watercooled chiller PANASONIC ECOi P WQE1004CA 295.6 kW Cooling capacity: 295.6 kW / 84.05 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Bitzer GSD80295VAB4-2 (scroll) Type of refrigerant: R410a Dimensions: 2.2x1x1.88 m. Weight: 1453 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Nedpfx Aswp Duqof Ujwk Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Required scope of delivery for the push-through safety device: 1x U-profile, used Material color: cream white Overall length: approx. 1,870 mm Profile dimension: U: 60 x 45 mm Material thickness: approx. 4.00 mm Weight/piece: approx. 9.57 kg including 2 swivel clasps Number of hooks: 4 hooks (hooks per clasp) 2x Locking pins, used Material color: Sendzimir galvanized Additional information: Racking system: Vogelsang Type: NS Nsdpfshh Hu Usx Af Uewk suitable for clear width: approx. 1,800 mm Overhang: approx. 65 mm Two original clasps are attached to the U-profile. With the help of these, the push-through safety device is hung into the upright and fixed with locking pins. The images regarding the assembly of the push-through safety device serve only to illustrate the material. The material colors may differ. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, Year of construction: 2026, Heating output / nominal thermal output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue outlet: rear (standard) Flue: Ø 180 mm Filling chamber volume: 80 liters Nsdpehvibzefx Af Uswk Required chimney draft: min. 12 Pa Dimensions of the filling opening (L x W): 300 x 340 mm Weight: 375 kg Efficiency: 88.2 % Energy efficiency class: A+ The EWI-A 15G space heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV (Federal Immission Control Ordinance).

Condition: excellent (used), Belt conveyor 1,34m with drive Nodpfx Afohvmlve Uowk Length: 134cm width: 50cm Height: 90cm Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Nwedpfx Aehv U Tiof Uok Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Nwedpfxjhv U T Hs Af Uek Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Nwedpfx Afshwhfus Ujk Cooling Mode: WATER COOLING

Condition: excellent (used), EX protected forklift battery 24V + charger Explosion-proof battery according to 2014/34/EU II 2G Ex eb IIC T6 Gb II 2D Ex tb IIIC T80°C Db BVS 03 ATEX E 266 X Manufacturer: GNB Industrial Power Model: Marathon Classic Designation: EX 24V 3 EPzS 270 Flex Plus Aqua Type: 3 EPzS 0270 SZC Trough no. 57534134010 Rated voltage: 24 Volt Capacity: 270 Ah Number of cells: 12 Weight: 234 kg Acid volume: 34 liters Delivery date: 24.04.2019 Charger Still HFX 24V - 55 A Benning E230G24/55B-HFX 24 V 55 A Applications The traction batteries in the EPzS series are ideal energy storage devices for industrial trucks, cleaning machines, road vehicles, tractors and other electric vehicles with high energy requirements and heavy cyclical loads. Technical features Nwjdet Sq Erspfx Af Ujk > Robust lead-acid technology with liquid electrolyte > Proven tubular plate technology for a long service life > Fully insulated terminal screws and plugs > DIN and BS sizes according to IEC 60254-2 > Manufactured according to DIN EN ISO 9001 > Environmental management according to DIN EN ISO 14001 > Fully recyclable Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!