Used Löwer Dsm 2004 for sale (7,102)

Condition: used, Gear motor, electric motor, electric gear motor, gear motor Movigear classic -Manufacturer: SEW-Eurodrive, gear motor Movigear classic Lredjra Rn Eopfx Aiion -Type: MGFAT2-DSM/WA/PE -Speed: 3.6...36.2 rpm i= 55.25 -Connection voltage: 400 V -Torque class: 200 Nm -Hollow shaft: Ø 30 x 90 mm -Protection class: IP66 -Dimensions: 250/150/H300 mm -Weight: 14kg

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm Ledpfovyq Dusx Aiiorn -Weight: 12.1 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece -Dimensions: 210/180/H25 mm Ledpfx Aowcw S Noiijrn -Weight: 4 kg/piece

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 268 mm -Groove width: mm -Dimensions: see photo technical drawing -Dimensions: 285/85/H180 mm -Weight: 10.8 kg Lrjdpfx Aijv Sqmtsisn

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed Lodpfx Aioxrz Taoisrn -Manufacturer: Nucleus, lowering unit - flatbed for ultrasonic welding machines -Eco FR360102 -Servomotor: NuDC42I25R-1000 Voltage 24 V -Number: 5x lowering unit available -Price: per piece -Dimensions: 340/240/H130 mm -Weight: 4.5 kg/pc.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm Ljdpfx Aexzb E Isiiorn -Weight: 2.3 kg/pc.

Condition: used, Quick-change tool holder, tool holder head, quick-change tool holder, quick-change tool holder, quick-change tool holder, quick-change tool holder -Quick change boring bar holder: DB 2004 Ljdpfx Aogrlptsiiorn -Recording dimensions: see photos -Clamping diameter: 55 mm -Clamping length: 220 mm -Dimensions: 220/140/H130 mm -Weight: 9.2 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 272 mm Lsdpfx Ajwyvbwoiijrn -Holes: Ø 24 mm -Dimensions: see photo technical drawing -Dimensions: 300/125/H50 mm -Weight: 8.9 kg

Condition: used, Year of construction: 2004, Mazak Multiplex 6300 Mazatrol 640T YOM: 2004-11 approximately 20 pcs tools Ljdpov Tvkaofx Aiiern Mazak Flex-GL200F More information is coming soon.

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Lodpfotrhv Sjx Aiiorn Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Lrodexl Tp Tspfx Aiisn Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Lrodpfxjxrcahj Aiijn Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Ljdpsxqx Avsfx Aiijrn Heating power: around 11 kW

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 29000 € 553.9 € 2050 mm 4 mm 42 1/min 750 mm 7.5 kW 800 mm 450 mm 2700 mm 2300 mm 1350 mm 2800 kg Lrjdpfowir Dtex Aiijn motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH

Condition: used, Year of construction: 2004, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Lredeu Hza Dspfx Aiion Assortment of tools is included in the price Weight: 1400 kg

Condition: used, Year of construction: 2004, Cloth cutter Kolbus: KS Year: 2004 Description: -Unwinder Lodpfxoxy Rfbo Aiisrn -Circular knives: 10 -Rewind for waste material: 1 -Delivery table Material width: max. 1.400 mm.

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Pneumatic pressers Lrsdpsxzpwlefx Aiijn Adjustment stops 380V

Condition: used, Year of construction: 2004, SINGLE-HEAD COPYING MILLING MACHINE FOR THROUGH-OUT MILLINGSTechnical DataParticularly designed for machining aluminum, light alloys, and PVC 1.1 Kw (1.5 HP) three-phase motor - 2800 rpm Chuck revolutions 14,000/min Vertical stroke 110 mm Longitudinal stroke 220 mm Cross stroke 115 mm Working pressure 7 bar Lrsdpswykmbefx Aiisn Dimensions 57x70x161 cm Weight 118 kg

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003190 - Manufacturer Code: - Condition: As new (showroom item) - Functionality: Fully functional - If interested, we offer an overhaul service, please contact us. Lrsdswtz Txopfx Aiisn

Condition: used, functionality: unexamined, Ferwood Code: RU0003035 - Manufacturer Code: 2-055-06-3371 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Lodpfx Ajv D Idaeiiern

Condition: used, functionality: unexamined, Ferwood Code: RU0002486 - Manufacturer Code: 2-055-05-3371 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Ledpfx Ajv Dvckoiijrn

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis Lodpfx Aen Hwl Aeiiorn

Condition: ready for operation (used), functionality: fully functional, mileage: 650,000 km, power: 110.32 kW (149.99 HP), fuel type: diesel, overall weight: 7,500 kg, axle configuration: 4x2, gearing type: mechanical, loading space width: 4,000 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, truck registration, Overhauled vehicle, technically very well maintained; requires 2 new batteries. Suitable for small jobs, short wheelbase, beverage transport. Drop-side body with adjustable tarpaulin frame. Ljdpfx Aijw Rq Ekoisrn

Condition: used, Year of construction: 2004, Pneumatic press for upholstery, Camam brand, year 2004 (CE), used Lredpfoyccuhsx Aiijn Dimensions and weight: Cm. 90*60*H 200. Weight 200 kg (1 piece)

Condition: used, Year of construction: 2004, - Brand: JLG - Type: 660SJ - Year of construction: 2004 - Weight: 13115 kg. - Drive: 4x4 - Working height: 22 meters - Lateral reach: 18.3 meters - Lifting capacity: 230 kg. - Jib arm - Rotatable work tray - Aerial work platform book available - CE document available Lodpfexyhv Rsx Aiijrn - Safety inspection possible - Video on our website - Trade-in and transport possible * Brand: JLG *Type: 660SJ * Construction year: 2004 * Weight: 13115 kg. * Drive: 4x4 * Working height: 22 meters * Lateral reach: 18.3 meters * Lifting capacity: 230 kg.