Used Hydraulic Motor,Hydromotor for sale (37,080)

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Ksdpfszwcluox Ahgenb Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Year of construction: 2005, condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Jungheinrich ESE 320 G 20-240-54 -Hydraulic pump: Type -Motor: Type 1 547 220 535 24 V 2.2 kW -with: tank and control valve -Dimensions: 175/160/H365 mm Knsdji Aqa Ujpfx Ahgsb -Weight: 9,6 kg

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Ksdeyz Dr Topfx Ahgonb Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: excellent (used), FLUTEC hydraulic ring hydraulic unit pump type: Flutec PT-300/2.0 23cm3/min max 350bar axial piston pump: Parker PV032R Year of construction approx. 1998 Nominal working pressure: max 350 bar three-part system. Flow rate: approx. Tank capacity: 150 liters Motor power: 5.5 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve SEF 5-25 65lit/min Knjdpfjk Nmlyex Ahgob Space requirement Length: 800 mm, width: 650 mm, height: 1000 mm Own weight: approx. 300 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, HYDRAULIC SHEAR LVD HD CS 31x13 Serial number: 34887 Year of manufacture: 2007 TECHNICAL SPECIFICATIONS Max. sheet thickness (St45): 13 mm Cutting length: 3100 mm Range of back gauge: 750 mm Min. cutting angle: 0.5° Max. cutting angle: 2.5° Min. number of strokes/min: 7 Max. number of strokes/min: 35 Min. blade clearance: 0.05 mm Max. blade clearance: 2.2 mm Motor power: 15 kW Weight: 8700 kg OPTIONS: Electrical adjustment of back gauge (1000 mm) with digital readout. Knsdpfx Ajzg Dp Tehgeb Electrical adjustment of cutting angle. Adjustable blade clearance. With 90° square arm front support. Foot pedal. CE safety standards.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, operating hours: 12,647 h, power: 37 kW (50.31 HP), pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, oil tank capacity: 600 l, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S 5050mm x 400t Year of manufacture: 2010 Only 12,647 hours and 406,154 cycles!!! Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Overhang: 405 mm Stroke Y-axis: 400 mm Installed height: 720 mm Kedpfszzvfiex Ahgsnb Table width: 140 mm Motor power: 37 kW Oil volume: 600L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 mm Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control: Cybelec ModEva 10S, 2D – Graphic control • Upper tool clamping, Trumpf/Wila, hydraulic • Lower tool clamping, Trumpf system, hydraulic • CNC-controlled crowning • Safety light curtain, Lazersafe • 2 CNC bending aids incl. parking position • Pneumatic die shifting • LCB angle measuring system (2 x front, 2 x rear) • Foot switch Upper tools Trumpf OW203/S 60° R4 H220 130t/m, segmented, approx. 6000mm Trumpf OW203/S 60° R8 H220 130t/m, segmented, approx. 3050mm Trumpf OW300/S 86° R1 H300 80t/m, segmented, approx. 1380mm Trumpf OW210/S 28° R1 H240 40t/m, segmented, approx. 4060mm Trumpf OW200/S 86° R4 H218 80t/m, segmented, approx. 2700mm Lower tools Trumpf EV-W003, 30° R1.0 H100 70t/m, segmented, approx. 1500mm V10 Trumpf EV-W016, 50° R1.6 H150 50t/m, segmented, approx. 4100mm V16 Trumpf EV-W020, 84° R2.0 H100 70t/m, segmented, approx. 3650mm V20 Trumpf EV-W024, 80° R2.5 H100 70t/m, segmented, approx. 3050mm V24 Trumpf EV-W030, 80° R5.0 H100 80t/m, segmented, approx. 6000mm V30 Trumpf EV-W030, 30° R3.0 H100 90t/m, segmented, approx. 3050mm V30 Trumpf EV-W040, 80° R5.0 H100 120t/m, segmented, approx. 4570mm V40 Trumpf EV-W040, 30° R5.0 H100 90t/m, segmented, approx. 3050mm V40 Trumpf EV-W050, 80° R5.0 H100 150t/m, segmented, approx. 1000mm V50 Trumpf EV-W060, 80° R5.0 H100 150t/m, segmented, approx. 4560mm V60 Trumpf EV-W080, 80° R05 H100 150t/m, segmented, approx. 4550mm V80 Trumpf EV-W160, 80° R15 H150 200t/m, segmented, approx. 4000mm V160 Trumpf FWZ H100 120t/m, segmented, approx. 4500mm All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Knjdpjzbql Sjfx Ahgjb Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth, hydraulic power unit, hydraulic station -Type: Rexroth AHAG -Pressure: 250 bar -Flow rate: 42 l/min / 2 working circuits Knodsy D Hhvopfx Ahgjb -Motor: ABB 11 kW / 1455 rpm -Hydraulic reservoir: Tank capacity 160 l with level indicator -Return filter: RFBNHC 330F10 A1.X -Pressure reservoir: Hydac, capacity 10 l -Individual components: see photos -Dimensions: 1340/680/H1500 mm -Weight: 484 kg

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 33407, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 300 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table length: 3,050 mm, throat depth: 400 mm, ram plate length: 3,000 mm, distance table to ram: 570 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, total length: 5,700 mm, total width: 2,100 mm, total height: 3,685 mm, overall weight: 14,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Technical specifications Force: 2200 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 300 mm Distance table – ram: 570 mm Gap: 400 mm Turbo PP5400 Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Weight: 13500 kg Kedpfjzkxqmox Ahgonb Motor: 37 kW Oil: 350 L Weight: 14500 kg LxWxH: 5700 x 2100 x 3685 mm Table: PP8170 V-axis  EFL 130 PP8303 Upgrade 2026  Top tool clamping: PP3090 – Wila  Hydraulic top tool clamping: PP3100  PP3160 hydraulic clamping V-dies  Back gauge: PP8251 XRZ modules: X1000  Security; CE: PP3580 – lasersafe  PP8402 T1 T2

Condition: used, Year of construction: 2008, Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control system - 3 controlled axes (Y1, Y2, X) - manual Wila crowning table - 2 adjustable support arms - light barriers - incl. bending tools & operating manual Knjdpfx Ahjzl Tkdogsb - year of manufacture 2008 Technical data - Press capacity: 40 t - Bending length: 2050 mm - Distance between uprights: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Overhang: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

Year of construction: 1981, condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Ksdpfx Aschp Azjhgjnb -Max. Pressure: 25 l/min -Hydraulic tank: mm -Motor: kW rpm -Hydraulic valve -Pressure relief valve -pressure clock -Filter -Dimensions: 500/800/H850 mm -Weight: 248 kg

Condition: ready for operation (used), Rexroth Siemens Hydraulic / Hydraulic Unit 128 L/min Siemens motor 15 Kw 1460 rpm Rexroth pump 1PV2V4-31 / 80RA37MWO - 16 Comprehensive and professional unit, from dismantled machine line. Location: Hamont-Achel, Belgium Seller is not liable for typographical or data transmission errors. The machine is consistent with age in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Kodpfxovilnae Ahgjnb Rexroth Siemens Hydraulik / Hydraulik aggregate 128 L/min Siemens motor 15 kW 1460 U/min Rexroth-Pumpe 1PV2V4-31 / 80RA37MWO - 16 Umfangreiche und professionelle Einheit, entstanden aus einer zerlegten Maschinenlinie. Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer Rexroth Siemens Hydraulic / Hydraulic Unit 128 L/min Siemens motor 15 Kw 1460 Rpm Rexroth pump 1PV2V4-31 / 80RA37MWO - 16 Extensive and professional unit, originating from a dismantled machine line. Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 Kedslc R Rxopfx Ahgsnb constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t Ksdpfxez Dug Ie Ahgonb

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Knsdeyi Hrwopfx Ahgeb Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 120 mm, table length: 3,200 mm, throat depth: 230 mm, ram plate length: 3,200 mm, distance table to ram: 390 mm, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125 × 3200 MTP-3212 Touchscreen Control The MTP 125 × 3200 hydraulic CNC press brake is designed for accurate and efficient sheet-metal bending. It delivers 125 tonnes of pressing force and offers a maximum bending length of 3200 mm. The machine can process sheet metal up to 6 mm thick. It is suitable for workshops and manufacturers operating in electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive, aerospace and other metalworking sectors. CONTROL AND EQUIPMENT - X-axis back gauge with servo drive - Y-axis beam adjustment with servo drive - Manual R-axis back-gauge finger height adjustment - Back-gauge travel: 600 mm - Two front material supports - AMADA-style quick punch-clamping system - Mobile controller - Control panel mounted on a movable arm - LED working-area lighting MTP-3212 CNC CONTROLLER The MTP-3212 features a large colour touchscreen and an intuitive, user-friendly menu. The software automatically calculates the bending angle, simplifying machine setup and improving production efficiency. The controller can store data for up to 40 punch types. HIGH-QUALITY COMPONENTS The hydraulic system uses high-quality German Rexroth valves. The electrical system incorporates Schneider Electric components, while safety components are supplied by Omron and Schneider. Steel hydraulic connections significantly reduce the risk of future leaks. SAFETY EQUIPMENT - Clearly visible safety markings - Side guards - Rear safety gate - Easily accessible emergency-stop switches - Safety light curtain preventing accidental access between the punch and die The machine is supplied with a Polish-language operating manual and a CE Declaration of Conformity. TECHNICAL DATA - Maximum sheet thickness: 6 mm - Pressing force: 125 t - Maximum bending length: 3200 mm Knjdpfxjytp N Ho Ahgjb - Distance between columns: 2700 mm - Throat depth: 320 mm - Ram stroke: 120 mm - Maximum opening height: 390 mm - Back-gauge travel: 600 mm - Motor power: 7.5 kW - Weight: 7500 kg - Dimensions (L × W × H): 3870 × 1550 × 2400 mm - Front supports: 2 - Controller: MTP-3212 - Punch clamping: AMADA-style quick clamping TECHNICAL SUPPORT Our specialists can assist with planning bending sequences for complex parts, selecting suitable materials and tools, and choosing optimal working parameters. Pre-purchase technical consultation is also available to help select the correct machine and accessories. Delivery can be arranged. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation.

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm 4 mm 50 mm 15 1/min Ksdpfx Ahowiqyyjgjnb 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules

Condition: used, volt / V ampere / A weight / kg total power requirement / kW For sale is a hydraulic pump incl. hydraulic unit DUTCHI MOTORS Type: DMA2 100LX4 No.: 2909432027 Power: 3kW - 3;3kW Knjdeywnzkepfx Ahgjb Rotation: 1425 1/min - 1720 1/min

Condition: used, Year of construction: 1990, tank capacity 160 l feed pressure 160 bar weight / kg Hydraulic power pack - NACHI S. hydraulic unit Manufacturer: NACHI-FUJIKOSHI CORP. (Japan) Type: Hydraulic equipment Model/serial number: S Year of manufacture: 12/1990 Condition: Used, fully functional, with hydraulic filter, valve unit and motor Application: Suitable for machine tools, presses, automation technology 3. hydraulic pump Manufacturer: NACHI-FUJIKOSHI CORP. (Japan) Model: UPV-1A-22M1-2.2-4 Knedpfx Ajylz D Tshgeb Power: 2.2 kW Type: UNI PUMP - compact pump with integrated motor Connections: Standard industrial thread Construction: Compact unit - ideal for retrofit or replacement Origin: Dismantled directly from MAZAK machining centre Condition: Used, ready for operation, suitable for oil temperature control in hydraulic systems The unit was dismantled from a MAZAK machining centre and was in perfect working order until it was dismantled.

Year of construction: 2002, condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump Kodsi Dbznspfx Ahgsnb -Manufacturer: HPI, hydraulic pump from picking truck type ECE 20 -Hydraulic pump: type 5090979 -Motor: Type AU3480 24V 1.5 kW -with: tank and control valve -Dimensions: 200/180/H370 mm -Weight: 9.8 kg

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Rexroth, hydraulic pump from pedestrian stacker JungheinrichTyp ERC 205 -Gear pump: Type -Drive: 24V 3kW -Number: 2x unit available -Price per piece -Dimensions: 140/130/H330mm / 150/130/H330mm -Weight: 14.3 kg / 13.9 kg Ksdpfx Aheiyqpksgsnb

Condition: good (used), Year of construction: 2003, Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from order picking forklift type ECE 20 Kedpfxsiy Efmo Ahgenb -Hydraulic pump: Type 50125677 -Motor: Type AU3480 24V 1.5kW -Dimensions: 200/175/H360 mm -Weight: 9.7 kg

Year of construction: 2006, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Ksdpem Dyh Rsfx Ahgjnb -Manufacturer: FMB Blickle, hydraulic unit with hydraulic tank from rotary transfer machine Uldrian TSM 22-8 -Hydraulic pump: pressure up to 120 bar -Flow rate: 22 l/min -Motor: 4 kW / 1500 rpm -Hydraulic tank: with level indicator, tank capacity 100 l -Oil cooler -Individual components: see photos -Dimensions: 720/500/H1630 mm -Weight: 293 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Ksdpfxjycck As Ahgonb -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Kodpfx Ahsdzp Tcogsnb Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.