Used Elco 7Kd2-291 for sale (231)

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Guodpey Tiaasfx Aa Ejd Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: excellent (used), Year of construction: 2012, 455 USED Koma CDS Refrigerated Proofing Unit. Consists of two rooms. Guedjzlm T Sspfx Aa Eod TECHNICAL DATA: - Temperature range: to -20°C. INTERIOR DIMENSIONS (in cm): - W: 264 + 196, - H: 200, - L: 291 (or 325). The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: new, Centauro ALFA NC Machining Centre For Joinery Components & Doors A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine can be equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Optional additional machining operations include producing a square corner hinge plate recess or lock face recess by means of the additional milling unit. The operator simply selects in the program if they want a radius or square corner and the machine does the rest. In addition the same milling head can be used to make the small pilot hole for hinge screws etc. There is also the possibility to produce a square end tenon, round end tenon or dovetail / dovetail slot when the special front table is fitted. Lastly on request the machine can be configured to import ISO files from external design software (e.g ARTCAM Express) to enable detailed engraving of items such as name plates etc. Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm Godpjb Tmngjfx Aa Eoud X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain.

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Specification Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Gsdjb Tmwaspfx Aa Eoud Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter

Condition: used, Year of construction: 2001, total length: 3,700 mm, total width: 1,650 mm, total height: 190 mm, Colour: White Empty weight: 3.300 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 291/01 - Drive system: Teach-in - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Bed width [mm]: 365 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Three-jaw chuck, Digital readout, Fixed steady, Quick-change tool post - Transport dimensions: 3700mm x 1650mm x 190mm (l x w x h) Godpszhuvgefx Aa Ejud - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control from CNC machining center Santenberg GTC S 2 Guodpfx Asktm Duoa Eod -Pressure switch: Parker Senso Control SCPSDControl valves: coax 5-VMK 32 NC / 1 824 210 291 -Individual components: see photos -Submission/Price: complete -Dimensions: 340/145/H510 mm -Total weight: 14.7 kg

Condition: excellent (used), Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, spin-on filter -Filter elements: Hydraulic oil filter, fuel filter 485 pieces -Type: Various types from different manufacturers -Price/Sale: complete Guodpfxon Sru Uo Aa Eod -Transport dimensions: 1200/800/H780 mm -Total weight: 291 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 3.5 kW -Output: 105/140V 291/391Hz -Power: 3.4 kVA -for edgebanders, edgebanding machines -Weight: 120 kg Gedpfxob A I Hqo Aa Ejud

Condition: excellent (used), Hydraulic filter, filter element, oil filter, filter cartridge, hydraulic oil filter, fuel filter, spin-on filter Gsdpfx Aen Srvvoa Esud -Condition: Original packaging, unused, very good -Filter elements: Hydraulic oil filter, fuel filter 540 pieces -Type: various types from different manufacturers -Price/Fee: complete -Transport dimensions: 1200/800/H800 mm -Total weight: 291 kg

Condition: good (used), Year of construction: 2007, Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm Gedpfxeypci Ss Aa Ejud -Weight: 291 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 43,331 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 45 mm, clearance between the columns: 630 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, Stock No.: 503604 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 43331 h Technical Data - Clamping Unit Clamping Force: 2500 kN Tie Bar Distance h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 90 mm Ejector Force: 225 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Tool Weight: 3800 kg Guedpozfi Uxsfx Aa Eod Technical Data - Injection Unit Screw Diameter: 45 mm Displacement Volume: 318 ccm Injection Pressure: 2470 bar Screw Length: 22 l/d Screw Stroke: 200 mm Screw Speed: 60 min Screw Torque: 1000 N Plasticizing Rate: 242 g/s PS Free Injection Flow Rate: 291 g/s PS Number of Heating Zones: 7 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 6.12m x 1.94m x 2.4m Total Weight: 12230KG Equipment Screen text in German CEE socket 16A Compact Flash drive Hydraulic core pull 2x Pneumatic core pull 3 x Machine including conveyor belt Machine including handling system Machine including safety enclosure Machine without material hopper Leveling elements Tool heating 12x Technical Data - Handling System Machine Type: Linear Robot Manufacturer: Arburg Control System: Multilift Year of Manufacture: 2012 X-Axis: 400 mm Z-Axis: 1400 mm Rotation Axis C: 90 ° Total Weight: 450 kg

Condition: excellent (used), Year of construction: 2005, operating hours: 36,012 h, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, injection weight: 291 g, mold height (min.): 250 mm, Arburg 470C-1500-800 injection molding machine with conveyor belt and picker (257) Year of production: 2005 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Gedpfxszfhx Ao Aa Ejud Language: german Installed power [kW]: 44.9 Working hours [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot socket: euro12 Feed hopper: NO

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Gsdpfxjzd Uqcj Aa Ejud Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, turning length: 291 mm, turning diameter: 270 mm, Like new condition; has not yet been used in production. Control system: CNC path control SIEMENS SINUMERIK 828 D TECHNICAL DATA Main spindle Turning diameter: 270 mm Turning length: 291 mm Gujdpoyrd Uhofx Aa Ejd Chuck diameter: 210 mm Spindle bore: 76 mm Drive power max.: 10.5/20.0 kW C-axis (resolution): 0.001° Speed range up to: 45-4,500 rpm Turret (tool holder) Number of stations: 12 Of these, driven: 12 Speed of driven tools: 5,000 rpm Tool holder: BMT 45 X-axis: 175 mm Z-axis: 350 mm Tailstock Tailstock quill diameter: 65 mm Tailstock quill stroke: 80 mm EQUIPMENT/ACCESSORIES  Hollow cylinder for main spindle  C-axis for main spindle  Tailstock  Drive unit for turret  Coolant system  IKZ = internal coolant supply, 10 bar  Chip conveyor  Flush gun  Parts catcher  3-jaw chuck SAMCHULLY MH-208 BVI, max. diameter 210 mm, incl. set of jaws  Documentation

Condition: used, Year of construction: 2012, machine/vehicle number: LV45, Technical Summary and Application Scope – ATES Giorgia 6000 bphThe ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections.Main Technical DataType: Industrial glass bottle washer and rinser, suitable for recycled and new bottles.Nominal output capacity: up to 6,000 bottles/hour depending on bottle format, contamination level, and line configuration.Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows.Mechanical composition: Shelves, baskets for bottle housing, and automatic loading/unloading with push bars. Easy inspection access for maintenance.Water treatment: Hot-water washing with caustic detergent (soda) followed by multi-stage rinsing.Installed electrical power: approx. 20 kW.Electrical supply: 400 V, 3-phase, 50 Hz; auxiliaries 24 V; PLC/SCADA integration (Siemens, Omron, Allen-Bradley).Water consumption: 1.0–1.5 m³/h via 1″ G (BSPP) supply, minimum 1.5 bar.Drainage: integrated rinse and tank drainage via 2″ pipeline.Compressed air: 6 bar operating pressure; approx. 20 Nl/h; 1/4″ connection.Thermal energy: approx. 250,000 kcal/h (~291 kW) via dedicated heat exchanger, compatible with steam or hot water supply; typical wash temperature around 70 °C for caustic stage.Filtration: internal filtration plus 0.2 μm microfiltration for process water.Sanitation: cleaning and sanitization stages including pre-wash and rinse, with detergent and disinfectant dosing; thermal insulation of tanks and piping for energy efficiency.System Architecture and Process FlowReturnable bottle cycle (full washing and rinsing)Automatic loading into baskets via push bars.Pre-wash spray to remove dirt and label residues.Immersion in hot caustic bath to disintegrate adhesives and organic matter.High-pressure internal and external washing through jetting manifolds.Multiple recirculating rinses followed by a final rinse with clean water or potable/demineralized water.Continuous label and debris extraction with filtration to prevent clogging.New bottle cycle (rinsing only)Spray pre-wash.Pre-treatment with detergent solution. Gsdpfxoxqmqzs Aa Eoud

Condition: new, working width: 1,250 mm, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Seppi M. H7 125 flail mower / incl. swivel ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - mulches grass and light brush up to 7 cm in diameter - for excavators from 5 to 15 tons - Universal interface for mounting various adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: Housing: with replaceable wear plates - LOW PROFILE: Low profile design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor depending on the flow rate of the carrier machine - 4D ROLLER: reinforced support roller 152 mm Ø, with double tapered roller bearing, height adjustable - COUNTER CUTTERS: two rows of replaceable forged counter blades - Rotor wall thickness: 12.5 mm - Front protection with chains - Rear protection made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flail (standard) - 12 pieces, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating mounting (parallelogram guidance) OPT 555 Swivel adapter OPT 372 hydraulic 190° swivel device 3 hydraulic lines are required: feed, return and leakage oil. Optional: MS08 adapter plate incl. screws and mounting = €880.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Seppi M. products that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. Gedpfsy E Etysx Aa Ejud We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale are subject to change! Intended use: Agriculture Please contact Marius Herden for more information.

Condition: excellent (used), power: 45 kW (61.18 HP), fuel type: diesel, fuel tank capacity: 85 l, color: other, mast type: triplex, Year of construction: 2018, operating hours: 1,902 h, Drivetrain Drive: Wheel Gujdpfx Aaezfl Sys Eod Engine type: Perkins 404D-22T Measures Dimensions (LxBxH): 635 x 208 x 278 cm Weights Empty weight: 6.922 kg Carrying capacity: 291 kg GVW: 7.213 kg Functional Mast: articulated arm Working height: 707 cm Maximum reach: 671 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Hammer/sorting function - Quick change - Rotation function - Sliding leaf - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Oostenrijk reversing camera

Condition: good (used), mileage: 456,085 km, power: 265 kW (360.30 HP), first registration: 10/2009, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, total length: 6,200 mm, total width: 2,550 mm, total height: 2,910 mm, Year of construction: 2009, Equipment: ABS, Bluetooth, air conditioning, cruise control, electric window regulation, power mirror, retarder, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Radio/cassette - Fabric - Central lubrication system - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 6560 kg, Gross vehicle weight: 18000 kg, Total tank capacity: 400 liters, Height of the fifth wheel coupling: 119 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 291 tons, Central lubrication system, Suspension type: Air suspension, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Seat heating, Bluetooth, Engine power: 265 kW (355 hp), Fuel: Diesel, Euro: 5, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, SHORT CAB // INTARDER // AIRCO // GERMAN TRUCK // EURO 5 = Further Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 295/80R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 11 mm; Tire tread depth right: 12 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inner: 14 mm; Tire tread depth left outer: 15 mm; Tire tread depth right inner: 15 mm; Tire tread depth right outer: 15 mm; Suspension: Air suspension Weights Gujdpfx Aajza Tpwo Eod Unladen weight: 6,560 kg Payload: 11,440 kg GVW: 18,000 kg Maintenance APK (Technical Inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands and model years, as well as a variety of price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of “recognizable quality” • And more…. Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: as good as new (ex-display), total width: 1,060 mm, total height: 1,540 mm, Remark: - This is a II. Wahl product, new and unused. II. Choice means there may be dust deposits, minimal scratches or soiling may be present Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,056 mm Number of bays per shelf row: 01 pcs. á 994 mm Number of shelves: 06 pcs. The scope of delivery includes: 02x shelf uprights, second choice (new) Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are unassembled 1,540 mm high 300 mm deep Remark: We are happy to pre-assemble the shelf uprights for you. Surcharge: 8.50 € | pc. plus 19% VAT. 06x Shelves, second choice (new) Article: ZB 4313 L Material color: grey Dimensions: 994 x 300 x 30 mm Weight / pc.: approx. 2,640 kg Max. load per shelf 100 kg with evenly distributed load 01x cross bracing, II. choice (new) Material color: sendzimir galvanized 24x open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Type: LF 322 Color: yellow Design: Recessed grip on the back Material: Polypropylene External dimensions (LxWxH): approx. 434 x 209 x 200 mm Internal dimensions (LxW): approx. 291 x 181 mm Gedpfxsp T T Daj Aa Eoud Usable height in stack: approx. 185 mm Capacity: 10.4 liters Stackable: yes Weight per unit: 0.780 kg Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, clear span: 994 mm, total height: 1,530 mm, shelf length: 1,056 mm, Technical data for crate racking: Racking system: SSI Schäfer Gedpjrm Iclsfx Aa Ejud Type: R3000 Technical data for installation: Number of rack rows: 01 pcs. Shelf length: approx. 1,056 mm Number of bays / shelf row: 01 pcs. á 994 mm Number of levels plus base level: 07 pcs. The scope of delivery includes: 02x shelf uprights, second choice Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. cross and diagonal braces The uprights are unassembled 1,534 mm high 300 mm deep 07x shelves, II. choice Material color: light silver lacquered Type designation: ZB4313L Dimensions: 994 x 300 x 30 mm Weight / unit: approx. 2.64 kg Max. load per shelf with evenly distributed load: 100 kg 01x Cross bracing, II. choice Type designation: KV31013 Material color: sendzimir galvanized 08x Open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Type: LF 322 Color: green (various) Design: Recessed grip on the back Material: Polypropylene External dimensions (LxWxH): approx. 434 x 209 x 200 mm Inner dimensions (LxW): approx. 291 x 181 mm Weight per unit: 0.78 kg 08x Open fronted storage box, second choice (new) Manufacturer: SSI Schäfer Type: LF 351 ZW Color: green (various) Design: recessed grip in the front Material: Polypropylene External dimensions (LxWxH): approx. 348 x 470 x 145 mm Inner dimensions (LxW): approx. 268 x 442 mm Weight per unit: 1.04 kg 01x load plate with details of bay and compartment loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Remark: - This is a II. Wahl product, new and unused. II. Choice means that there may be dust deposits, minimal scratches or soiling may be present. - The material color of the boxes may differ from the material may differ in color from the material shown in the picture. General information about the item: This item is only offered for collection. Any other desired transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 400 mm deep 08x Shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight per unit: approx. 4.65 kg Max. load per shelf 200 kg with evenly distributed load 21x Freestanding shelf dividers, second-hand Designation: TRF 44 27 Material color: sendzimir galvanized Clear shelf height: 291 mm 02x Side panel, second-hand Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 275 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Guodpfx Aaettl Euj Ejd General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 400 mm deep Godpsttk N Defx Aa Ejud 08x Shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight per unit: approx. 4.65 kg Max. load per shelf 200 kg with evenly distributed load 01x Drawer, used Description: ESCH 341010-V-Z Material color: sendzimir galvanized Dimensions: 994 x 400 x 100 mm Front panel height: 100 mm Useful depth: 337 mm 8 dividers STE4010, transverse 16 dividers QTE 1810, lengthwise incl. 2 pull-outs incl. 2 drawer side panels Weight per unit: approx. 11.10 kg Max. load per drawer 70 kg with evenly distributed load 16x dividers, used Material color: sendzimir galvanized Clear shelf height: 291 mm 02x side panel, second-hand Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 275 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2019, operating hours: 8,889 h, Equipment: all wheel drive, Tigercat LH822D, a modern tracked harvester (forestry machine). This machine is used in forestry operations to simultaneously fell, delimb, and crosscut trees—a so-called cut-to-length system. Tracked harvester manufacturer: Tigercat Industries Functions: Timber harvesting, delimbing, crosscutting (cut-to-length) Application areas: Forestry, including selective logging and salvage operations Dimensions & Weight * Length (without boom): approx. 5,180 mm * Width: 3,430 mm * Height: approx. 3,710 mm * Ground clearance: around 685–710 mm * Weight (without attachment): approx. 33,800 kg (ca. 74.6 t) * Tail swing radius: approx. 2,095 mm Drive & Performance * Engine: Tigercat FPT N67 (Stage V, Tier 4f, or non-certified) * Power: approx. 212 kW (284 hp) up to 217 kW (291 hp) at 2,200 rpm Drivetrain / Speed * Maximum speed (low range): approx. 1.6 km/h * Maximum speed (high range): approx. 3.4 km/h Hydraulics & Controls * Main, harvester head, and cooling pumps: piston pumps; additionally, a transmission oil pump * Hydraulic oil reservoir: approx. 204 L Gedjyawv Ijpfx Aa Eoud Very good condition

Condition: used, mileage: 291,000 km, power: 169 kW (229.78 HP), first registration: 09/2007, fuel type: diesel, overall weight: 21,000 kg, axle configuration: 2 axles, brakes: retarder, color: yellow, gearing type: semi-automatic, Year of construction: 2007, Equipment: ABS, air conditioning, SCANIA P 230 / 4x2 HOOKSYSTEM Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2007 ? MILAGE: 291 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? AIRCONDITION ? ENGINE BRAKE ? POWER STEERING ? TACHOGRAPH CAPACITY: 14 000 kg Gusdpfxoy Ikl To Aa Ejd TOTAL WEIGHT: 21 000kg WHEELBASE: 430 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 0749

Year of construction: 2005, condition: good (used), Sanyo SPW-XDR94GXH56(B) Variable Refrigerant Flow Semi Concealed 4-way air discharge Capacity : Cooling :2.80kw Heating 3,20kw Air-circulation (High) 900 phase 1. 50Hz Voltage rating (AVR) V 230 Running amperes 0.21 0.18 A Power input 0.032 0.022 watt Power sound level (H/M/L) dB-A Ref.dia. Narrow/Wide Pipe 6.35 (1/4) / 12.7 (1/2) Weight 21+4,5 kg Indoor Unit H/W/D mm 265 x 840 x 840 Panel H/W/D mm 291 x 950 x 950 • Sirocco fans and heat exchanger fins with new shapes are adopted and the operating sound could be reduced by max 6 db (A)! • Wide reduction of the power consumption by adoption of newly developed DC fan motors with variable speed, new heat exchangers • Easy fine adjustment of the body suspension height • Discharge opening and flap with new shape • A drain height of approximately 85 Gjdpsd Tw T Nsfx Aa Ejud cm from the ceiling surface • Easy servicing of the drain pan We have 6 pc on Stock!