Used Cox Paragon H50 55Kw 480Liter Hydraulic Twin Shaft Mixer Dissolver for sale (25,099)

Condition: used, Year of construction: 2018, Manufacturer: ONI, Year of manufacture: 2018, Serial no. 181626, Container dimensions: 8,000 x 3,000 x 3,000 mm, 3 pumps, Manufacturer: KSB, Type: ETB (heat recovery/hydraulic cooling/free cooling), Free cooler 500 kW (roof-mounted), 10 fans with adiabatic cooling, L/W/H 9,930 x 2,290 x 1,510 mm, Water treatment system with plastic tank 2 x 3,000 liters, Water softener, 7 heat recovery units, Type SW25, Heating capacity 25 kW, Air volume flow 6,000 m³/h, 4 with door air curtain nozzles, 2 air heaters, Type SW1 (office area), Pump and valve group for heat recovery circuit, Heating element, 200 W, System control: Siemens Simatic S7, Touch panel HMI +++ Attention: This system is part of an online auction! +++ Hnedpozn Atajfx Agtst

Condition: used, LVD Shear Hjdpfxox Tqtbs Agtent Type HST C-10/31 Capacity 3000 x 10

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hsdpsz Afhpjfx Agtsnt Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Hnodpew T U A Sjfx Agtot

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Cutting length 5000mm - longer in automatic mode, with automatic repositioning of the saw up to 10000mm Overhauled/like-new double miter saw with saw blades D=500 mm The machine can be motor-driven to swivel from 135 to 22.5 degrees and has a Hsdpfx Agez Adywetent cycle control system. Software options for short cuts, macros, overlength cuts, crosscuts and cycle cuts are also available for this machine. Data transfer is possible (Orgadate, Schücal, etc.) Accessories: Moving roller conveyor, tensioner on roller conveyor, automatically extendable profile support between the heads.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Cutting length 5000 mm – longer cuts are also possible in automatic mode, with automatic repositioning of the saw up to 10000 mm. Refurbished/like-new double miter saw with saw blades D=500 mm. The machine can be motor-driven to swing from 135 to 22.5 degrees and has an indexing device. Hjdpjz Adydjfx Agtent Software options for short cuts, macros, oversized cuts, miters, and indexing cuts are also available for this machine. Data transfer is possible (Orgadate; Schücal... etc.). Accessories: Traveling roller conveyor, tensioners on the roller conveyor, tensioners from above and from the front, automatically extending profile support between the heads.

Condition: good (used), Year of construction: 2010, functionality: fully functional, cutting length (max.): 100,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. – Connection to window manufacturing software (orgadata / Unilink / Wictop... etc.) is possible. Hnsdpfjz Adxgox Agtot The machine features the following equipment: - Industrial PC with Windows - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function - Overlength cutting - Crosscut - Automatic cutting - Connection to external software is possible (Orgadata, Unilink, Wiktop... etc.)

Condition: new, Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving your hands free to align the workpiece. Technical data: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Downholder pressure: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy shear blades with a high chrome content - Upper blade with 2 cutting edges, lower blade with 4 cutting edges - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Lateral stop with double scale - Feed worktable with ball rollers - Full-length front intervention guard - Hydraulic, independent hold-down device - Manual back gauge 600 mm - Overload-protected hydraulic system - Safety foot switch Options: - Hydraulic sheet holding device - Increased motor power for more strokes / min Hnjdotvnczspfx Agtjt - Back gauge with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC back gauge 800 mm with M15S control unit - CE conformity

Condition: new, Technical Specifications: Capacity: 200 t Installation height: 900 mm Max. working area: 1300 x 450 mm Piston stroke: 400 mm Advance speed: 6.4 mm/s Return speed: 11.04 mm/s Motor power: 7.5 kW Width: 2100 mm Depth: 1200 mm Height: 2850 mm Weight (approx.): 2600 kg Equipment features: - Laterally adjustable cylinder via rack, pinion, and handwheel - Generously dimensioned working area - Height-adjustable table - Torsion-resistant welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Hnedpepl T Dijfx Agtet Your benefits: - Among the heaviest-duty models on the market - Available in capacities up to 500 tons - Maximum performance and stability - Various table widths available upon request - Horizontally freely positionable hydraulic cylinder with handwheel, rack, and pinion (from 160 tons) Available with special equipment: - Fine pressure adjustment - PLC control - Worktable with T-slots for securing irregularly shaped components - Lateral hydraulic cylinder adjustment Support prisms available at extra cost.

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Forward speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Features: - Cylinder with lateral adjustment - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Hodpfxek Nz N Ej Agtont Support prisms available at an extra charge.

Condition: new, Powerful hydraulic workshop press with movable cylinder (via handwheel), ideal for large and heavy workpieces. Picture shows WHP 160 Technical data: Capacity: 250 t Installation height: 900 mm Working area, max.: 1300 x 450 mm Piston stroke: 400 mm Forward speed: 8.58 mm/s Return speed: 13.03 mm/s Motor power: 15 kW Width: 2450 mm Depth: 1200 mm Height: 2650 mm Weight, approx.: 3100 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Your advantages: - One of the heaviest versions on the market - Available with tonnages of up to 500 tons - Maximum performance and stability - Different upright widths available on request - Horizontally freely positionable hydraulic cylinder, handwheel, rack and pinion (from 160 tons) Available with special equipment: Hnjdpfx Aep Dt Uujgtet - Fine pressure adjustment - SPS control - Working plate with T-slots for fixing irregularly shaped components - Lateral hydraulic cylinder adjustment

Condition: new, Hydraulic plate shear Fintek Type/Model: TS 2080 x 6.5 Condition: New Exclusive: Trade fair machine EURO-Blech Hannover 2026 Compact hydraulic plate shear, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the positioning and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving the hands free to align the workpiece. Technical data Cutting length: 2080 mm Sheet thickness: 6.5 mm Strokes/min: 24 - 36 Number of clamps: 12 Clamp pressure: 5.6 t Front support arms: 1000 mm Rear stop: 600 mm Cutting angle: 1/2 - 2° Motor power: 11 kW - High-quality, high-alloy shear blades with a high chromium content, suitable for stainless steel - Upper blade 2-edged, lower blade 4-edged - Hydraulic cutting angle adjustment ensures a clean, low-distortion and precise cut at any sheet thickness - Manual cutting gap adjustment (models from 4.5 mm and larger) - Excellent visibility of cutting lines via LED with shadow projection - High number of strokes per minute ensures fast operation - Generous support arms with adjustable stop - Side stop with double scale (metric/imperial) - Feed work table with ball rollers for effortless movement of the sheet - Continuous front guard - Hydraulic, independent clamps ensure perfect clamping of the sheet at all times, regardless of the degree of wear of the clamps, by applying the same pressure (no slippage or dragging of the sheet during cutting) - Manual rear stop 600 mm - Overload-protected hydraulic system - Mobile control panel with safety foot switch and emergency stop button Hnodpfx Agozh Uuietst - High performance and reliability - Various options available, e.g. small parts diverter, NC-controlled rear stop with intuitive control via touch screen, angle stop, sheet lifting device, etc. - Current CE conformity Options: - Pneumatic sheet lifting device with: - Selector switch for sheet return on the operator side or the rear of the machine - Integrated rollers for even and smooth removal of the cut material - Increased motor power for more strokes/min - Rear stop with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC rear stop 800 mm controlled via ball screw using M15S or FATEK control Inquiry item! Shipping costs in individual offer.

Condition: new, Technical data: Capacity: 60 t Installation height: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Forward speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Features: Hnsdpfx Aek Nz Ndjgtjt - Cylinder that can be shifted laterally - Generous working area - Height-adjustable table - Torsion-resistant design made of welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Forward speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Features: - Cylinder with lateral displacement via rack and pinion and handwheel - Generous working area Hnedpfjk Nz Ntsx Agtet - Height-adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Hnsdpfsd Euz Esx Agtst -Piston diameter: approx. 60 mm -Piston rod: Ø 30 mm -Eye diameter: 22/20 mm -Stroke: 40 mm -Quantity: 1 cylinder available -Price: per piece -Dimensions: 445/85/H110 mm -Weight: 7.8 kg

Condition: excellent (used), 540 USED Diosna paddle mixer with removable bowl. EXTERNAL DIMENSIONS (in cm): - W: 95 - L: 123 - H: 112 TECHNICAL DATA: - bowl capacity: 190L / 75kg of flour / 120kg of dough - power supply: 380 V, 3-phase, 50 Hz - weight: 960 kg EQUIPMENT: - 6 stainless steel bowls - 2 speeds The price is a net price. Hnedpfszz S Tpex Agtot Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), 539 USED Diosna SP 180 AD spiral mixer with removable bowl. EXTERNAL DIMENSIONS (in cm): - W: 86 - L: 150 - H: 155 TECHNICAL DATA: Hsdpszz S Srjfx Agtjnt - bowl capacity: 280L / 110kg of flour / 180kg of dough - power supply: 380 V, 3-phase, 50 Hz - weight: 960 kg EQUIPMENT: - 2 bowls The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1993, Manufacturer : OLSA Model : MACEF SP 50 Year : 1993 Type: Vacuum mixer / Homogeniser Tank capacity: 50 L Installed capacity: 8 kW Slow-speed agitator type: anchor + counter-blades / 1.5 kW with variable-speed drive. Bottom-mounted homogeniser/disperser: 2.2 kW with variable-speed drive. Jacketed : - Cooling water supply: max. 2 bar – 0.5 m³/h - Steam supply: max. 2 bar – 20 kg/h Compressed air supply: max. 1 bar Vacuum pump: yes Interior tank lighting: yes Temperature display via PT100 Technical file available   Hnsdpszz Thhjfx Agtst Dimensions: 150 x 120 x 210 cm (when open) Weight : 600 kg Missing scrapers replaced at the time of sale

Condition: excellent (used), Year of construction: 2005, operating hours: 6,701 h, functionality: fully functional, overall weight: 19,000 kg, Doppstadt DW2560 Buffalo/Shredder/Chipper/Crusher/Slow-Speed Machine • Manufacturer: Doppstadt • Type: DW2560 • Year of manufacture: 11/2005 • Magnetic tape • Operating hours: 6701 hours • Engine: Mercedes Benz OM 442 Diesel engine • Slow-speed machine • Roller length: 2.5 meters • Roller diameter: approx. 600 mm • Roller: 17 teeth • Discharge height: 2.9 meters • Throughput: material-dependent, in the range of up to approx. 30 t/h • Remote control • Rear discharge conveyor • Transport length: 20 m • Transport width: 2.51 m Hjdpfx Aozz Sn Togtsnt • Transport height: 3.95 m • Total weight: 19000 kg • German machine • Immediately ready for operation • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), Year of construction: 1998, Well-maintained, used plate shear from Safan. Type: HVR 430 6 Hnsdpfozz Rx Dex Agtst Capacity: 4300 x 6 mm More photos will be available soon.

Condition: good (used), Year of construction: 1987, Used OMAG plate shear Type CEL 104 Hnjdpjzz Ru Ejfx Agtet Capacity 1100 x 4 mm

Condition: used, Hydraulic Cylinder, Double-Acting Piston diameter: approx. 160 mm Piston rod diameter: 100 mm Hedjxcivdepfx Agtent Cylinder stroke: approx. 170 mm Operating pressure: approx. 300 bar Compression force at 300 bar = 60 metric tons - Thread on piston rod - Spherical rod end on cylinder for pin Ø 90 mm Retracted installation length: 850 mm Net weight: 200 kg Cylinder was used for test purposes and is in as-new condition.

Condition: used, Hydraulic power unit with piston pump PUMPEN WART in Erkrath High-pressure pump, high-pressure hydraulic unit (in need of repair) Type SJK2C Serial No. 48315, Order No. 230045 Year of manufacture: approx. 1975 Pressure capacity: 1000 bar (according to nameplate) Flow rate: 25 liters/min (according to nameplate) Flow rate: 25 liters/min (at 0 bar) Flow rate: approx. 3 liters/min (at 1000 bar) Piston pump with 2 pistons, 50 mm stroke 280 double strokes per minute Tank capacity: approx. 100 liters Motor power: approx. 11 kW Power connection: 380 volts, 50 Hz Required space (L x W x H): 1000 x 600 x 1200 mm Weight: approx. 350 kg No proper function during test run, although the unit was last used on a test bench. Hodpfx Ajxcimpsgtent Possible issues due to extended downtime and storage period. Sale without functional guarantee, without technical demonstration, at a special price.

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz Hodpfxewb Hxvs Agtjnt - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: used, High-lift pallet truck - pedestrian stacker, tiller stacker KENTRUCK Type Ergo-H Serial No. Year of manufacture: 2001 Load capacity: 800 kg Lift height: 900 mm Hnjdpfx Aoxcbmnsgtet Fork length: 1170 mm Fork width: 70 mm Entry height at base of mast: 90 mm Overall fork width (outside): 570 mm Width between forks: 425 mm Distance between load rollers: 275 mm Lifting travel per pump stroke: 15 and 45 mm - Lift travel is manually switchable at the hand pump lever - Hand lever pump operates like a conventional pallet truck, lifting movement via the pull tiller - 2 steering wheels Ø 150 mm made of polyamide, 1 with parking brake, forced steering via the pull tiller - 2 fork rollers Ø 80 mm made of polyamide Dimensions (L x W x H): 1700 x 780 x 1370 mm Net weight: 150 kg Good condition