Used Bartels Double-Sided Cantilever Rack for sale (30,462)

Year of construction: 2021, condition: new, The prices mentioned in this advertisement are valid as of mid-2021. Due to the current international situation, the prices of steel and transportation are increasing almost daily. The availability of steel as a raw material is limited and currently unpredictable. Therefore, we kindly ask you to inquire about the current prices and availability! We will be happy to provide you with an up-to-date offer! Cantilever rack, double-sided, 4.16m height, 1.20m arms, 500kg per arm - NEW -: Price ex works including loading! 1 rack unit with 4 uprights €2,395 (net)! Fodpfx Akoddmr Nsyjpn Price for transport within Germany (excluding islands): €425 (net)! Of course, you can also create longer or shorter rack units by omitting or adding more frames (or by using different bay widths); this example with 4 frames is just the most common rack solution! A cantilever rack system, hot-dip galvanized, consisting of: 4 rack uprights, double-sided, approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 adjustable arms of 1.20 m, 500kg load capacity per arm with cross braces approx. 1.30 m Rack uprights, double-sided, approx. 4160mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable rack arms each Load capacity with load center at 600 mm 500 kg per arm / 2250kg per upright side with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will be added to the stated price for lengths from 1.50m! Special sizes (different bay widths) are also available upon request, but they will also incur an additional cost and have a longer delivery time as they need to be manufactured separately! If you do not specify any deviating bay widths, we will deliver the rack with a bay width of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors.

Condition: used, Year of construction: 1998, machine/vehicle number: 2 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Fedpfx Aoyvz Stjkyjpn Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Fpsdpfx Aeyvz U Iskyon Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3500x1500x1650 mm Weight 2500 kg Total power requirement 45,8 kw Fpjdpovz Evhsfx Akyon

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width 910 mm Fsdpfx Aozxqa Nokyepn upper combination unit lower combination unit two feed speeds belt oscillation electronic material thickness setting material thickness gauge Table with vacuum pump on the second unit Year of manufacture: 2009 New conveyor belts installed in 2023

Condition: excellent (used), CATALOGUE NUMBER 7964 TECHNICAL DATA - max. width of workpiece: 630mm - max. thickness of workpiece: 250mm - from above: - toothed feed roller - deflector rolls Fodpfxjzx Rkno Akyepn - pressure roller - toothed feed roller, 2 pcs - pressure roller - 4-knife planing shaft, 630mm, 15kW - pressure roller - smooth feed roller - from below: - adjustable infeed table - toothed feed roller - 4-knife planing shaft, 630mm, 7.5kW - adjustable draw roller in the lower table, 2 pcs - electric height adjustment - lifting motor 0.65kW - 6 feed speed settings - feed motor 4kW - diameter of dust extraction nozzle 2x160mm - dimensions (L/W/H): 1780x1850x1700mm - weight approximately 3000kg ADVANTAGES - new knives installed - manufactured by the German brand KUPFERMUHLE - very good condition - used planer Net price: 37900 PLN Net price: 8814 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Fjdoznn Upspfx Akyjpn Weight of machine approx.: 10 ton

Condition: excellent (used), functionality: fully functional, overall weight: 22,000 kg, first registration: 07/2007, total length: 9,530 mm, total width: 2,550 mm, Year of construction: 2007, Equipment: ABS, Two-way tipper trailer 22 R 15 Brand: Viberti 2 axles, 4x2 Year: 07/2007 Bodywork: Padovani Useful load capacity: 16,270 kg Gross vehicle weight: 22,000 kg Overall length with drawbar: 9,530 mm Internal bed width: 2,550 mm Bed length: 7,600 mm Air suspension Disc brakes BWP axles ABS Tire size: 315/80 R22.5 Dual wheels. DESCRIPTION: Two-way tipper trailer 22 R 15 Make: Viberti 2-axle, 4x2 Year: 07/2007 Modification: Padovani Payload capacity: 16,270 kg Gross weight: 22,000 kg Fodsyiddhepfx Akyjpn Overall length with drawbar: 9,530 mm Internal bed width: 2,550 mm Bed length: 7,600 mm Air suspension Disc brakes BWP axles ABS Tire size: 315/80 R22.5 Dual wheels.

Year of construction: 1993, condition: used, pressure 63 t stroke 10-80 mm no. of strokes 65-400 Hub/min ram - range of adjustment 80 mm table surface area 1030x550 mm ram surface 920x450 mm hole in the table 700x200 mm Fpedslp U E Ropfx Akysn 420 mm weight of the machine ca. 10 t

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. Fpjdpfx Aksd Tbbdoyjn The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Fpedpfx Akjuqd S Ajyjn Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Fpedpfx Aksyq R D Hoyjn

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 - Pressure zone Fedpfx Ajzz R Rgjkyopn Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Fpodpfx Akofdkbhoyjn - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: PUR Fpjdeyilxmepfx Akyon Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Fpsdpsmhhf Ssfx Akyon Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2019, condition: like new (used), We offer both used and new cantilever racking and pallet racking systems. We will gladly prepare a customized quote for you. To do so, please provide us with the following information: - Length and height of the desired racking, - Number of shelf levels, - Shelf load capacity. If you have any questions, please do not hesitate to contact us. The images are example photos. Fpsdpshr D Dtofx Akysn

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 3500 kg Total power requirement 57,7 kw Fodpfxevz Ei Uj Akyepn

Condition: excellent (used), CATALOGUE NUMBER: 7993 TECHNICAL DATA - Number of loading areas: 2 - Manually adjustable side clamps: 2 x 4 pieces - Pneumatic vertical clamps: 2 x 4 pieces - Maximum length of glued elements: 2500 mm Fsdpezxhczofx Akyopn - Maximum height of glued elements: 1330 mm - Maximum thickness of glued elements: 110 mm - Guides for gluing thin elements - Dimensions (L/W/H): 3000 x 1350 x 2000 mm - Weight: 900 kg ADVANTAGES - Two working areas - Gluing length: 2500 mm - Pneumatic actuators - Guides for gluing thin elements - Unpainted - Mobile – on wheels - Used press, very good condition Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1985, Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Fpodpeyvkukjfx Akyjn Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2200x900x1700 mm Weight 1900 kg Fpjdpfxsvz Ezqj Akyon Total power requirement 15 kw

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Fpodpfxozuyqio Akyjn Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. Fpjdpsfdkb Uofx Akyon The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Fpjdjvmfzbopfx Akysn Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Automation

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t Fpedpezrpqyjfx Akyon dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800