Used Bts-Sackpresse Bts-Bag Press for sale (14,539)

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm Dodpfx Aieu Nfrpolocn table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m Dcodsu Nfv Uspfx Ailen The machine is equipped for straightening work. *

Condition: used, Technical details: pressure: 0,9 t daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Dedpsu Nfw Sefx Ailscn Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation *

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws i.D. Dcodpju Nfr Njfx Ailon *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm Djdpeu Nfudsfx Ailjcn ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Dcjdpfxera Rbge Ailen Material processed: foil, cardboard Idle cycle time: 25 s

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 170 h, pressing force: 320 t, working width: 5,100 mm, degree of automation: automatic, Equipment: emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, TOSKAR press brake Pressure 320 tons Bending length 5100mm Bending length between columns 4100mm Speed of approach movement 100 mm/s Djdpfx Aijwq Aa Iolocn Speed of bending movement 9 mm/s Speed of return movement 100 mm/s Opening 300 mm Distance to columns 500mm Year 2015 Only 170 working hours 5 Axes Y1, Y2, X, R, deflection arrow CNC controller with NexT touch screen

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Membrane: yes Dcedpfx Ajzq Urteilsn No of positions for the rolls: 2 No of work tables: 1

Condition: good (used), Strautmann AutoLoadBaler baling press Suitable for baling: Dcjdpfsv Aktnex Ailjn Cardboard Film PET bottles Foam Cans Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force kN: 530 Year of manufacture: 2017-2018

Condition: used, Tapping and blowing kit Manufacturer: Heinrich Huetz Safety system for drilling into house connections and for blowing lines up to DN 50 Numerous accessories available; additional images can be sent upon request. Packaged in metal boxes Includes operating instructions. Djdpfx Aioci D Ucjlocn

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Djdpfjzt Nirsx Ailecn Container for roll-off tipper trucks 20 m³ usable volume technically refurbished repainted in desired RAL color hook lift system on both sides discharge door hinged at the top

Condition: used, New hose assembly machine, DAEWOO type DA5100-HC Hydraulic hose crimping press, workshop hose crimping press for crimping hose connections Serial no. 25DW06440ALE01, Year of manufacture 2025 Crimping force: 500 tons Crimping range: Ø 1/4 to 2" (15-63 mm) Maximum die opening: approx. 75 mm Pump flow rate: 6 L/min Operating capacity: 200 pieces/hour Hydraulic pressure: 315 bar Motor power: 3 kW Mains connection: 400 volts, 50 Hz - 2 operating modes: manual and automatic Dcsdpfx Aioz Afhpjljn - Operation via buttons or foot switch - Crimping stroke adjustment via knurled screw - Short changeover times for conversion to other hose diameters - Crimping jaws are easily inserted into guides and held in place by magnetic force - 10 tool sets, crimping dies (Ø 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm) - Cabinet base with hydraulic unit Space requirement L x W x H: 700 x 500 x 1200 mm Weight: 270 kg New - unused

Condition: used, functionality: fully functional, Comafer Dinamic 250N briquetting machine with closed-loop oil cooling and cooler capacity: 100–250 kg/hour, depending on the material. Briquette diameter: 75 mm. cylindrical housing (ø1200) with inspection door, additional ring (sleeve) ø1200 / h930, pressing force approx. 1100 kg/cm2. 2 cylinders. briquette cylinder ø 200 mm. pump motor (11 kW / 15 HP, 380 V, 50 Hz). Monobloc, self-centering, without fixing rods for the round die. Electrical control panel with PLC, automatic and manual cycle. Shut-down mechanism with open die and die pressure gauge. Digital thermostat for oil temperature control, level switch to prevent oil leakage. Closed-loop oil cooling system (air/oil). Closed-loop cooler for die cooling (580 mm x 550 mm x 908, weight 56 kg). threading head for the production of long briquettes, briquettes with uniform length, complies with CE standards dimensions: 2100 mm x 1350 mm x 1540 mm (height), weight: 1600 kg Dodpfx Aoz D A Ugjilocn

Condition: excellent (used), Briquetting machine POR Oscar 9kW Djdoxdahyjpfx Ailjcn Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Dcodpfx Asxfwdsilen Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency Dedpfoz D Tnwsx Ailscn - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Dcodpfsv Nhx Uox Ailsn Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: excellent (used), total length: 3,500 mm, total width: 1,300 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport length: 4,350 mm, transport width: 1,600 mm, transport height: 2,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Dcodpfxsxxpgbe Ailjn Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: good (used), functionality: fully functional, Valmet Sunds pulp dewatering press / bleaching press * Roll diameter: 900 mm * Roll length: 2820 mm * Roll speed: 2 - 15 revolutions/min Dcsdpfx Aisz Hc A Ajljn * Roll gap: 3 - 13 mm

Condition: used, Year of construction: 2019, power: 4 kW (5.44 HP), 1. PRESCONTAINER LM10ASG +HKV, YEAR OF MANUFACTURE – 2019 OUTPUT – 5.5 kW CAPACITY – 10 m2 2. PRESCONTAINER LM10ASG, YEAR OF MANUFACTURE – 2015 OUTPUT – 5.5 kW Dcjdpfsz Hclkox Ailsn CAPACITY – 10 m2 3. PRESCONTAINER LM12R + HKV, YEAR OF MANUFACTURE – 2009 OUTPUT – 5.5 kW CAPACITY – 10 m2 4. PRESCONTAINER NP10APK, YEAR OF MANUFACTURE – 2011 OUTPUT – 5.5 kW CAPACITY – 10 m2 PRICE UPON REQUEST!

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Type – LM20L Year of manufacture – 2014 Capacity – 20 m³ Motor power – 5.5 kW 2. PRESKONTAINER LM20L, 2011, 5.5 kW Dcedjz Hbzqopfx Ailjn Price on request!

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,800 kg, type of input current: three-phase, input voltage: 380 V, total height: 4,500 mm, total width: 1,400 mm, total length: 1,400 mm, The lime feed system is one of the main components of the desulphurization system. This particular system is installed in one of the incinerators. The main challenge was to ensure that the top section could be removed using a forklift with a maximum lifting height of 3 meters. Features: 1. A vibration motor is installed on the big bag mounting plate to improve lime dispensing. 2. The upper section is mounted on the hopper with a window, and the connection point is sealed. 3. A platform is provided for access to the window for opening the big bag. 4. The big bag is separated from the tray by means of a pneumatically operated valve. 5. The tray is suspended on strain gauges to monitor sorbent availability and adjust sorbent feed rate. 6. A level sensor is also included. 7. A mixer is installed in the tray. It also has a seal to prevent the sorbent from escaping the system. 8. The steel structure is designed to accommodate the installation of a screw conveyor. Dcedpfx Aozphdgeilsn 9. The steel structure provides unobstructed access underneath for maintenance of the system components.

Condition: ready for operation (used), machine/vehicle number: B1507I0168, functionality: fully functional, operating hours: 5,687 h, input voltage: 400 V, input current: 51 A, input frequency: 50 Hz, pressing force: 230 t, stroke length: 445 mm, overall weight: 17,200 kg, Equipment: CE marking, CNC hydraulic press brake TRUMPF TruBend 5230 (type B23), year 09/2019 – available immediately. Machine currently in production, very little use for its age: – Machine operating hours: 5,687 h – Slide cycles: 229,247 (recorded on the control panel on 09/28/2026) Features: Dedsz E R U Depfx Ailscn – 5-axis machine, CNC crowning – Bending force: 2,300 kN (230 tons) – Stroke: 445 mm – TRUMPF TouchPoint TruBend control panel – Weight: 17,200 kg – Connection: 400 V / 50 Hz, 33 kVA – CE marking TRUMPF tooling (upper and lower tools) available as an option. Location: Replonges (01), France. Inspection under power possible by appointment. Price upon request. Dismantling and transport can be arranged upon request.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Closing force: 635 kN Operating pressure: 206 bar Piston diameter: 200 mm Djdpfx Aijz Er Uxolscn Stroke: 140 mm Daylight height: 150/180 mm Heating plate dimensions: 250 x 300 mm Max. weight of the heating plates: 70 kg Oil tank: 100 l Rated power: 19.66 kW Heating power: 9.6 kW Vacuum motor power: 2.6 kW Light barrier, distance to the tool area: 270 mm Stroke of the vacuum cover: 140 mm Dimensions: 2,650 x 2,100 x 2,100 mm The vulcanizing press from the manufacturer PAN STONE, type S-V-65-2RT-PCD, was used by a renowned German company in the sealing technology and electromobility sector. This company is known for its high quality and innovation in sealing production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its very good condition. This press offers you the opportunity to invest in a proven technology that has been used by a leading company in Germany.

Condition: excellent (used), Catalog number: 7732 TECHNICAL DATA - Pressing force: hydraulic Djdpfx Aiezw Dbkeljcn - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Capacity: approximately 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max. operating pressure: 150 bar - Dust extraction outlet: 90 mm - Diameter of the filter bag opening: 500 mm - Max. bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Made in Italy – Option for direct connection of a sawdust extraction system – Used briquetting machine – DTR documentation available – Very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)