Used Stelzer Rührwerke International Gmbh Directional Jet Agitator Agitator for sale (75,815)

Condition: used, For sale is a propeller agitator from Erwin Stelzer Warburg. It is model 8M 63G.D2. Data for the agitator: RPM: 225 V: 220 / 380 kW: 1.5 Shaft length: 500mm Impeller diameter: 240mm Connection: DN200 Further information can be found on the nameplate. Lodpfoga I T Isx Af Ssrt

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. Ljdezl U Uwjpfx Af Ssrt The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! Lrodsu Nwx Ujpfx Af Sjt *

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 Lrsdpfx Afjyhxl Ro Set 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal Lredpfxsw S Iiie Af Sjt - Crushing bar with comb - Counter comb in new condition - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final - Only 980 operating hours

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Lsdpfxozfi Hbj Af Ssrt Supply voltage: 400 V Supply current: 47.5 A Air supply: 6 bar Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed.

Condition: used, Linear unit, linear axis, gantry axis with magnetic drive, linear guide for magnetic linear motor, electric slide Manufacturer: GEIGER Handling GmbH & Co. KG Type: Motion Liner 20.0 Serial No.: 228773 2207 02659 Year of manufacture: 2022 with 2x linear guide REXROTH N R160 520 431 PTS / FD274 / RO10 Length of the guide rail: 3790 mm Length of the base body - overall length: 3980 mm - Standard linear guide BOSCH REXROTH series R1605 - guide rail 15 mm - Base body profile made of steel 200 x 95 mm - Measuring system with metal tape RSF MS 40.x6 MK (measuring length 3440 mm) - Base body with permanent magnet bed for linear motor Overall dimensions L x W x H: 3790 x 200 x approx. 140 mm Weight: 162 kg (weighed) very good condition - like new, unused from stock Lodpfxjzinxqo Af Ssrt

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 40 kg, input voltage: 110 V, laser power: 60 W, type of cooling: air, total width: 1,520 mm, total height: 1,115 mm, total length: 1,205 mm, overall weight: 275 kg, warranty duration: 24 months, travel distance X-axis: 875 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 225 mm, Reliable cutting and engraving quality is ensured by proven core technologies and a robust design, which minimize downtime and keep your production running smoothly. A simple, efficient workflow with Ruby® Essential combines design, job preparation, and machine control into one connected platform for faster, clearer, and more intuitive operation. OptiMotion™ automation enables clean, fast cuts by dynamically adjusting speed and acceleration, saving setup time while consistently achieving high-quality results. Centralized system control and smart electronics provide real-time monitoring of the laser, exhaust system, filters, and temperature, increasing uptime and making operation easier, even for beginners. Flexible support options allow you to start with an attractive entry-level system and add premium Trotec training, service, and spare parts support whenever you need it. Lsdpfjzcazlex Af Ssrt

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo VAST GOLD Year of manufacture: 2001 Retrofit in 2024 and 2026, last calibration 11/2023 Measuring range: X = 900 mm, Y = 1800 mm, Z = 700 mm Lsdpfx Afozkhzhs Sert In excellent technical and optical condition. Device features, equipment: C99 control system with control panel Automatic temperature compensation VAST GOLD sensor Probe changer magazine, 17-position Probe changer, 20 positions Probe accessories Calibration sphere Reference probe HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software QS-Stat option Calypso upgrade and other options available Further accessories and options possible Available on short notice

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled Ledpfxeznr Sxo Af Sjrt - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. Lodpfszl Uzwox Af Ssrt The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2026, condition: new, functionality: fully functional, For sale: Skip container, 5.5 - 12 m³, crane container, waterproof, concrete container Product description: For sale is a skip container, 5.5 - 12 m³, crane container, waterproof, concrete container, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: Standard: Technical description 30720-1 Crane container • Bottom: 6 mm S 355 • Sides: 4 mm S 355, 6 x 200 mm S355 Ledpfxezmqnve Af Sjrt • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 5 mm • Safety bar • Crane hooks x 4 • Frame edges: UNP 120/100 x 50 x 6 mm • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Technical description 30720 -1, waterproof • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 100 x 50 x 6 mm • Safety bar • Frame edges: U 100 x 50 x 4 mm • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Technical description • Bottom: 8 mm S 355 • Sides: 6 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 100 x 100 x 10 mm • Frame edges: UNP 140/120 • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and stable hinges Stackable and transportable with tilting truck systems Weather-resistant thanks to corrosion-resistant coating

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit (180 kW) A professional, industrial-grade refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. The unit is in excellent, well-maintained condition commensurate with its age and was in reliable operation right up until recently. Thanks to the modern R513A refrigerant, the unit is future-proof and meets current environmental and efficiency standards. Technical Data (according to nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of Manufacture: 2019 Refrigerant: R513A (Max. charge weight: 98 kg) Operating Voltage: 400 V / 50 Hz Operating Current: 85.4 A (Max. operating current: 141 A) Max. Operating Pressure: LP 19 bar / HP 28 bar CE Certified: Yes (Number 0036) Performance Data & Application Range Cooling Capacity: 180 kW – Ideal for the efficient cooling of large halls or commercial spaces. Heating Capacity: 290 kW – Highly efficient air heating through the smart utilization of waste heat from the refrigeration process. Dehumidification Capacity: approx. 100 liters per hour – Perfect for precise humidity control. Areas of Application: With this combination of performance capabilities, the unit is ideally suited for industrial production halls, large warehouses, and logistics centers, as well as for demanding process cooling and commercial dehumidification tasks. "A complete solution from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Ledpfx Ajzrlzzsf Sjrt You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive Lrodpfxszt Ip Ro Af Sot onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Lrsdozpzbfspfx Af Sst Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Lrodpjzp Iqmofx Af Sot Condition: Very good condition, year of manufacture 2022, fully functional. Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: new, Year of construction: 2026, machine/vehicle number: K00627, functionality: fully functional, operating hours: 2 h, power: 1.8 kW (2.45 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 240 mm, cutting width (max.): 450 mm, control type: manual, pivoting range: 45,060 °, actuation type: manual, total height: 1,300 mm, total length: 2,000 mm, total width: 850 mm, Equipment: CE marking, documentation/manual, The S 320 DG from Sägemaschinenfabrik Bauer GmbH is a powerful double-miter band saw designed for demanding applications in metal construction, mechanical engineering, steel construction, as well as in locksmith shops and manufacturing companies. Thanks to its robust industrial design, high cutting accuracy, and well-thought-out construction, it is ideally suited for economical and precise cutting operations in daily continuous use. With a generous cutting capacity of Ø 320 mm for round stock or 450 x 230 mm at 90°, the S 320 DG offers high flexibility for a wide range of workpieces and material cross-sections. Miter cuts from 45° to the left to 60° to the right enable versatile applications in the cutting of profiles, pipes, and solid materials. Lredpfozqdmmox Af Sst

Condition: new, Year of construction: 2026, machine/vehicle number: K00629, functionality: fully functional, operating hours: 2 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 320 mm, control type: PLC-controlled, total height: 2,100 mm, total length: 2,600 mm, total width: 2,000 mm, Equipment: CE marking, documentation/manual, lighting, With the bandsaw automation system SA 320 ZA, the Sägemaschinenfabrik Bauer GmbH offers a powerful, fully automatic sawing solution for demanding series production. The robust, column-guided design ensures the highest cutting accuracy, long service life, and reliable operation – even in multi-shift operations. Lsdpfszqdtyjx Af Sert Whether in the steel trade, metal construction, mechanical engineering, or contract manufacturing, the SA 320 ZA impresses with its high productivity, ease of operation, and durable quality.

Condition: good (used), Fritz Werner Universal Tool Milling Machine, Type 5130 An extremely robust and precise universal tool milling machine from the long-established, high-quality German manufacturer Fritz Werner (Model 5130). This conventional knee-type milling machine stands out due to its solid grey cast-iron construction and exceptional reliability. It is ideally suited for workshops, toolmaking shops, repair facilities, demanding DIY enthusiasts, or training centers. Ledpszcw Ddefx Af Ssrt The machine features a swiveling vertical milling head with manual quill feed (perfect for additional drilling operations) as well as a mechanical feed gearbox. A standout feature is the retrofitted premium safety spindle guard from Tecno Più. Technical specifications at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Design: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with drawbar) Table dimensions: Approx. 600 x 215 mm with 3 parallel T-slots Axis movement: Manual via precision handwheels (2 mm travel per revolution) + automatic feed (Type 101) Vertical head: Swivels ± 90° with manual quill lever and adjustable depth stop Drive: Three-phase motor (400 V, CEE plug included) Included accessories: Solid machine vise (mounted on table), drawbar, chip guard hood Safety upgrade (included): Spindle guard: Tecno Più S.r.l. (Model PTR 11/180) Year of manufacture of guard: 2017 (CE marked) Function: Impact-resistant polycarbonate shield (180 mm) with IP67 safety microswitch for automatic spindle cut-off when the guard is open. You can find other milling machines—new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Production line for cell stacks for 48 V hybrid vehicle batteries Aumann production line for cell stacks for 48 V batteries of the 2nd generation – manufactured in 2023, little used. Assembly – testing – installation of cell stacks into housings for hybrid vehicles. Manufactured in 2023 and little used. Some units are assembled, others are in their original delivery condition. Maximum Battery Size Size: 363 × 175 × 140 mm Lrsdpjzavwdjfx Af Sot Maximum Capacity Standard/Performance – 8 Ah / 17.5 Ah The system consists of 7 units that are linked together. 2 images are provided for each system/unit – a separate handout is available for each. Please provide us with your offer price! Technical data can be found in the handout. Any warranty claims are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: used, functionality: fully functional, conveyor belt length: 3,070 mm, conveyor belt width: 400 mm, Equipment: type plate available, Belt conveyor / conveyor belt / band conveyor Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt, SFT/P50 Total length: approx. 3070 mm Total width including motor: approx. 570 mm Total width without motor: approx. 430 mm Conveyor width / belt width: approx. 400 mm Belt type: smooth Material: steel Frame height: approx. 50 mm Including motor: 0.25 kW Including frequency inverter: TFR 600 HG Including 2 adjustable feet Internal article number: 2026051502 Conveyor technology – reliable and ready for immediate use – The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: Lsdpfx Ajza Dz Djf Sert • Condition: fully functional, with typical signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and securely packaged for transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Craft industry • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking shelves or container solutions.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20-3443, input voltage: 400 V, total width: 2,286 mm, total length: 11,994 mm, total height: 2,582 mm, temperature: -80 °C, type of input current: three-phase, cooling capacity: 12 kW (16.32 HP), input current: 63 A, ambient temperature (min.): -20 °C, input frequency: 50 Hz, ambient temperature (max.): 42 °C, For sale is a mobile, redundant, low-temperature storage unit in a container design, consisting of an antechamber with an operating temperature of -20 °C and a storage room with an adjustable temperature up to -80 °C. Technical data Storage temperature (adjustable): up to -80 °C Lrsdjzg Dtxjpfx Af Set Permissible ambient temperature: -20 °C to +42 °C Number of refrigeration circuits: 4 Sound pressure level (1 m free field): 73 dB(A) Refrigeration circuit – Stage 1 Refrigerant: R449A (GWP: 1,397) Number of compressors: 2 Compressor type: semi-hermetic reciprocating compressors, frequency-controlled Refrigeration circuit – Stage 2 Refrigerant: R508B (GWP: 13,396) Number of compressors: 2 Compressor type: semi-hermetic reciprocating compressors, frequency-controlled Condenser Number of condensers (Stage 1): 2 Heat output per condenser: 35.0 kW Fans per condenser: 2 Fan type: EC fans, speed-controlled Nominal air flow rate per condenser: 8,800 m³/h Electrical data Power consumption at operating point (total): 24.2 kW Current consumption at operating point (total): 43.9 A Recommended fuse rating: 2 × 63 A (CEE connector, redundant) Power supply: 400 V / 50 Hz / 3-phase + N Control system PLC: Siemens S7-1214C x 2 Operating panel: Siemens TP900 Comfort, 9 inches, 16.7 million colors x 2 Operating languages: German and English Inspection An inspection of the system is possible at our factory at any time by prior appointment. Upon request, the system can be put into operation during the inspection so that you can be convinced of its function and performance.

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) Lodpfszg Tyujx Af Sert new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: new, Year of construction: 2026, functionality: fully functional, Blasting container, 40 ft, with 9 m blasting chamber, screw conveyor floor (very low maintenance), blasting media preparation, and filtration system. Lodpfx Aezbztasf Sjrt Chamber dimensions (internal): approx. length = 8850 mm, height = 2485 mm, width = 2250 mm. Option: width including widening = 3240 mm. Transport height: approx. 3000 mm. Floor height: approx. 440 mm. Options: - Side container opening for 9 m and 3 m machine room - Side extension for widening the blasting chamber - Crane roof opening (not possible with side opening) - Crane track, 500 kg and much more upon request.

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon Lrodpfjzka Rujx Af Sst cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)