Used Spinner Milling Machining Centers - Vertical for sale (71,309)

Condition: used, Year of construction: 2002, travel -x axis 880 mm travel -y axis 630 mm Bsdpoyzt Auefx Amrodh travel -z axis 630 mm control HEIDENHAIN - TNC426M number of spindle speeds 12.000 U/min numbers of positions in the tool changer (2 x 16) 32 Tool bore SK 40 surface area 1.250 x 700 mm table load 600 kg Milling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 80 T | 80-T

Condition: used, Year of construction: 2019, chuck diameter 500 mm swing diameter over bed slide 700 mm control SIEMENS travel -x axis 630 mm travel -z axis 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. Bdedpox Szlrjfx Amroh - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT

Condition: excellent (used), Deckel Maho DMC 635V in top condition – few spindle hours (Heidenhain iTNC 530) For sale is a highly precise and excellently maintained Deckel Maho DMC 635V. The machine has very few spindle hours and is in excellent technical and visual condition. Technical data Control: Heidenhain iTNC 530 Travel (X/Y/Z): 635 / 510 / 460 mm Table clamping area: 790 x 560 mm Spindle speed: 20 – 8,000 rpm Feed rate: 0.01 – 10,000 mm/min Rapid traverse: 30 m/min Tool holder: SK40 (DIN 69871) Tool magazine: 20 positions Machine weight: approx. 3,600 kg Equipment & accessories Electronic handwheel Coolant/air blast switchover (M25) Coolant nozzle Machine condition The machine has been technically refurbished by us and is ready for immediate use: The geometry has been completely measured and is verifiably within the manufacturer's tolerance for new machines (geometry protocol included). All hoses have been preventively replaced. The machine has been thoroughly cleaned. An inspection and a detailed test under power are of course possible at our location. Everything from a single source: Baumgärtner CNC GmbH & Co. KG We are a specialist company that focuses on the service, maintenance, overhaul and automation of DMG machines as well as other well-known manufacturers. That is why we will not leave you alone even after the purchase. We will support you! We would also like to offer you the following: Bjdpfx Aez E A Hromrjdh Transport and professional installation Installation and commissioning at your location Subsequent maintenance and repair work From machine purchase to ongoing production – you can rely on us. Please contact us for further information or to arrange an inspection appointment.

Condition: used, Technical details: x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm tool taper: Sk 40 table surface area: 1070 x 230 mm Bdjdpfx Amsva Evfsrjh range of revolution per miute: 60 - 4.200 U/min feed continuous: 0,038/0,073/0,120 in 3 steps mm/min spindle stroke: 120 mm spindle taper: Iso 40 spindle head swivable left - right: 90 ° weight of the machine ca.: 1600 kg machine dimensions LxWxH: 1,8 x 1,5 x 2,15 m This machine is currently in the technical department. *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter Bdsdpfeu Iddnjx Amrjh spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: excellent (used), Year of construction: 2022, operating hours: 798 h, functionality: fully functional, machine/vehicle number: S102221332GKBCP, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 28 m/min, feed rate Y-axis: 28 m/min, feed rate Z-axis: 28 m/min, torque: 74 Nm, total height: 2,564 mm, total length: 3,264 mm, total width: 2,930 mm, overall weight: 2,850 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 98 h, spindle nose: SK 40, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, HURCO VM10i A vertical machining center in compact format, in almost new condition. !!! 98 operating hours of the spindle !!! Work area Spindle nose - table (mm) 102 - 610 Table - clamping surface L x W (mm) 762 x 406 T-slots (DIN 650) 3 x 18 H8 x 100 Table load (uniformly distributed) (kg) 1500 Travel X-axis (mm) 660 Y-axis (mm) 406 Z-axis (mm) 508 Feed rate Bdodjz Ei Amopfx Amrjh Rapid traverse X-axis / Y-axis / Z-axis 28 / 28 / 28 Main spindle Spindle taper (DIN 69871 A) SK40 Spindle speed max. (rpm) 10,000 Spindle power max. (kW) 11 Spindle torque max. (Nm) 74 Tool changer Magazine slots 24 Tool diameter max. (mm) 80 Tool length max. (mm) 250 Tool weight max. (kg) 7 Includes coolant tank (62 liters) and chip conveyor, as well as extensive accessories (machine vises, chucks, software for processing DXF files). An inspection is possible at any time. The Hurco is currently still connected and can be tested.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Bdjdpfozc D Enex Amreh Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2008, Ref. -No.: 10660 Manufacturer: DECKEL MAHO Type: DMC 835 V Year of construction: 2008 Type of control: CNC Control: Siemens 840D mit Shopmill Storage location: Halberstadt Country of origin: Germany X-Travel: 835 mm Y-Travel: 510 mm Bjdpfx Amezw Txforedh Z-Travel: 510 mm Main spindle drive power: 14 kW Table Dimensions (Lengthxwidth): 1000 x 560 mm Table Load: 800 kg Tool Taper: SK 40 Numbers Of Tools In Magazin: 20 Turning Speeds: 10000 RPM Max. Workpiece Weight: 4,5 t Further information: - Chip conveyor - Handwheel The machine can be inspected while powered on by prior arrangement.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 192746, MAZAK PFH-5800 – Technical Specifications Manufacturer: Mazak Model: PFH-5800 Year of manufacture: 2007 Machine type: Horizontal CNC Machining Centre CNC control: MAZATROL 640M Bdedpfxjz D Azao Amrjh Working range • X-axis travel: 730 mm • Y-axis travel: 730 mm • Z-axis travel: 740 mm • Maximum workpiece diameter: Ø800 mm • Maximum workpiece height: 1,000 mm • Pallet size: 500 × 500 mm • Maximum pallet/workpiece load: 700 kg • B-axis: 360° indexing • Standard indexing: 1° × 360 positions • Optional NC rotary table: 0.001° × 360,000 positions Spindle • Spindle taper: CAT 40 • Spindle speed: up to 12,000 rpm • Spindle motor: 30 kW / 40 HP (15-minute rating) • Continuous rating: approx. 18.5 kW • Maximum torque: approx. 167 Nm Tool changer • Tool magazine: 330 tools • Tool holder: CAT 40 • Maximum tool diameter: 150 mm with adjacent pocket empty • Maximum tool length: 400 mm • Maximum tool weight: 12 kg

Condition: used, Year of construction: 2023, operating hours: 2,031 h, functionality: fully functional, machine/vehicle number: 9088000015A, feed length X-axis: 1,100 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, controller model: Sinumerik One, workpiece weight (max.): 1,700 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,700 kg, overall weight: 6,950 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,031 h, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, We offer the transfer of a lease (cession) for a used DMG MORI M2 milling machine. Machine type: M2 Serial number: 9088000015A Year of manufacture: 2023 (first start-up: end of December 2024) Maximum spindle speed: 10,000 rpm Weight: 6950 kg X/Y/Z: 1100 × 550 × 510 mm Table: 1400 × 600 mm Spindle: up to 10,000 rpm SK40 Sinumerik One High rigidity thanks to the monobloc bed and fixed table (maximum load 1700 kg) First owner Bdsdsz Hl Ihspfx Amroh Price: LEASE TRANSFER Cession amount: 0.00 PLN Lease installment: 1340 EUR/month (currently the 21st installment out of 72), Total amount of installments to be paid: 68,340 EUR Lease buyout amount: 4200 EUR. The price stated in the advertisement is an indicative value for the entire lease agreement.

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Bjdpfoz Dttgjx Amrjdh Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: good (used), Year of construction: 1998, operating hours: 13,143 h, functionality: fully functional, nominal power (apparent): 22 kVA, controller manufacturer: Siemens, controller model: Sinumerik, input voltage: 400 V, For sale is another CNC vertical machining center, a DECKEL MAHO DMC 63 V from 1998, used and in good condition, commensurate with its age. The machine is operational and can be inspected in person with power applied, by prior arrangement. • Year of manufacture: 1998 • Control system: Siemens Sinumerik • 4th axis with clamping device • Tool magazine • Coolant system • Operating hours: approx. 13,143 hours in single-shift operation Mains voltage: 400 V Frequency: Hz Rated current: 17 A Apparent power: 22 kVA Bdsdpfx Amoz Dplfjrsh Auxiliary voltage: 230 V Control voltage: 24 V Type: DMC 63 V Serial number: A0883 Machine number: 999-d-076 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, 2012 Feeler HV-800 CNC Machining Center with Fanuc 18i-MB Controller Bjdpjz Dt N Ujfx Amrsdh X/Y/Z: 800/520/505 mm. 4th axis Unit: Peiseler AWUP 160. Table size: 950 x 520 mm. Spindle r.p.m: 15,000 r.p.m. Spind taper: BigPlus 40. Tools magazine: 30 pcs. Machine S/No: HVG044.

Condition: used, Year of construction: 2008, For sale is a vertical CNC machining center, MAZAK VCN-510C-II, manufactured in 2008. The machine comes from an industrial facility and is offered including the accessories and tool holders shown in the pictures. Technical data: Manufacturer: MAZAK / Yamazaki Mazak Model: Vertical Center Nexus VCN-510C-II Year of manufacture: 2008 Serial/Part No.: C22U5630050 Control: Mazatrol Matrix Nexus Travel distances X/Y/Z: approx. 1,050 / 510 / 510 mm Table size: approx. 1,300 × 550 mm Bdsdpfoz D Dg Dsx Amrsh Tool magazine: 30 positions Spindle speed: up to approx. 12,000 rpm Tool holder: SK40 Power supply: 3-phase, 400 V / 50 Hz Control circuit: AC 100 V / DC 24 V Rated connected power according to the nameplate: 33.1 kVA Weight: approx. 7,100 kg Dimensions: approx. 2,750 × 2,800 × 3,800 mm (W × H × L) Various tool holders and other accessories shown in the photos are included. Please refer to the pictures to determine the scope and exact assignment of the accessories, or check during an inspection. The machine shows signs of wear and tear due to age and use. Inspection is possible by arrangement. Loading, transport, and disassembly must be coordinated with the buyer in advance. Sale preferably to commercial enterprises. Subject to errors and prior sale.

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm Bdedpfsyvvlujx Amreh T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 242536, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, MACHINE INFORMATION Manufacturer: Mazak Model: VCS 530C Year: 2012 Condition: (Used) Great Serial Number: 242536 Control: Mazatrol Smart Accessories: 4th Axis, Renishaw Spindle Probe, and Tool probe. MACHINE SPECIFICATIONS Control: Mazatrol Smart X Axis Travel: 1050mm Y Axis Travel: 530mm Z Axis Travel: 510mm Max Workpiece Weight: 1200KG Spindle Speed: 12,000rpm Bdedpoz D Euvofx Amrjh Table Size: 1300 x 550mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: NVLA7K0128, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: Fanuc, controller model: 0i-MC, total length: 1,575 mm, total width: 2,168 mm, table width: 400 mm, table length: 600 mm, overall weight: 3,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, BRIDGEPORT HARDINGE GX480 Vertical Machining Centre. New 2007 With Coolant, Interlocked guards, Low Volt Light FANUC 0i-MC Control Machine Dimensions: 1575 x 2168 mm Machine Weight 3000 kg Spindle Motor Power 7.5 kW Spindle Speed 10000 rpm Table Size 600 x 400 mm Tool Change Capacity 16 Station Tool Size BT40 Bsdpfx Aoxgqwdomrjdh Traverses XYZ 480 x 400 x 330 mm

Condition: used, Year of construction: 2007, A vertical CNC machining center in need of repair is offered for sale. Main motor: 15kW (S1), max. current: 36A, phases: 3, control: Heidenhain. Weight: approx. 7000kg. The main spindle has bearing damage, and the control requires overhaul. An inspection is possible by prior arrangement. Bdjdpfx Asz Da Rxjmroh

Condition: good (used), Year of construction: 1998, Vertical Machining Center Mazak VTC-20C The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it. In 2025, the spindle of the MAZAK VTC-20C was overhauled. Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask. Bsdpfxovurd Ee Amrsdh Specification | Value ---|--- X-axis travel | 1,660 mm Y-axis travel | 510 mm Z-axis travel | 510 mm Distance from table surface to spindle nose | 180–690 mm Distance from column front to spindle centerline | 550 mm Working table area | 2,000 × 510 mm Maximum table load (uniform load) | 1,000 kg Spindle speed | 40–7,000 rpm Spindle motor power – 10 min rating | 11 kW Spindle motor power – 30 min rating | 7.5 kW Spindle motor power – continuous | 5.5 kW Spindle taper | 7/24 taper No. 40 X-axis rapid traverse | 24,000 mm/min Y-axis rapid traverse | 24,000 mm/min Z-axis rapid traverse | 20,000 mm/min X-axis cutting feed rate | 1–5,000 mm/min Y-axis cutting feed rate | 1–5,000 mm/min Z-axis cutting feed rate | 1–5,000 mm/min Tool magazine capacity | 24 tools Tool selection system | Tool holder No. fixed-address system (automatic short-cut system) Tool shank | NT-40 Pull stud bolt | Yamazaki-made ANSI type Maximum permissible tool diameter | Ø80 mm Maximum tool diameter with adjacent pocket empty | Ø110 mm Maximum permissible tool length | 350 mm (from gauge line) Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt) Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools) Machine weight | 7,215 kg Machine height from floor | 2,701 mm Required floor area | 4,000 × 2,990 mm

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data Bdjdszq Hwnopfx Amrsh X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Weight 4750 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 5.5 [kW] - Spindle speeds : 20000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/380/320 [mm] - Rapid traverses rates (X/Y/Z) : 48 [m/min] - Distance table / spindle nose (min./max.) : 305-665 [mm] TOOL CHANGER Bdsdey N Edgspfx Amrsh - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 25 - Tool exchange time : 0.7 [sec] TABLE - Table dimensions : 510X385 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.2 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1500X2075 [mm] - Machine height : 2400 [mm] - Machine weight : 2600 [kg] EQUIPMENT - CNC : YASKAWA SIEMENS YS840DI - Interactive programming : Shopmill - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : NIKKEN * model : 5AX130-HYA (2011) * travel 4th axis : -120°/+30° [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : 360 [°] * indexing precision 5th axis : 0.001 [°] * clamping diameter : 130 [mm] - Coolant tank - Electric transformer

Condition: used, Year of construction: 2000, functionality: limited functionality, travel distance X-axis: 1,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 450 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,200 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, distance table to spindle center: 600 mm, input voltage: 380 V, type of input current: three-phase, distance stand to spindle center: 450 mm, distance table to quill: 450 mm, grinding spindle motor power: 20 W, grinding spindle speed: 3,000 rpm, LGB brand surface grinder, machine with few hours of use, price plus VAT. Bsdpez Eac Rofx Amrsdh I have other machines for the metalworking industry; please contact me.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 20,000 rpm, Fanuc control system 2 tables, 1100 x 600 mm 40-tool changer BT40 spindle Maximum spindle speed: 20,000 rpm Bdodjy Ndlpepfx Amrsh 2 chip conveyors

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm Bdsdpfxjy E Tv Ao Amrjh max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door Bdodjw Ed U Njpfx Amreh - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.