Used Scraper Coveyor for sale (639)

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass Ijdpfezib Niex Ah Eotl scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Iedoppyhtjpfx Ah Estl Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Isdpsr A Eq Rsfx Ah Eetl Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: excellent (used), Year of construction: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue system for processing wood, PVC, ABS, and veneer edging. Suitable for furniture, panel materials, custom manufacturing, kitchens, bathroom furniture, joineries, and much more – complies with CE standards. Technical Data: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue pot height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Itedey Emw Hopfx Ah Eol Compressed air: 6–7 bar Machine Features: Automatic feed for roll and strip material Cartridge glue system enables in-operation switching between EVA and PUR adhesives or changing glue color 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer trimming, with 2 motors at 0.6 kW each Surface scraper unit Radius scraper unit Buffing unit Soundproof hood Control: Rotatable and tiltable operator panel All units individually controllable Function display with text and graphics Aggregate pre-selection display Program list with names and numbers, self-diagnosis Approximate machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1000 kg INCLUDES OTT Rondomat corner rounding unit Used machine information: • Technical data subject to change and prior sale. • Prices are ex-works, loaded free of charge! • The machine has been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at location. • Special agreements are only valid in written form. (Enquiries will only be answered with your address and telephone number!)

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Iodslc Ewijpfx Ah Estl Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: used, Year of construction: 2013, Used Machine Year of Manufacture: 2013 Features and Technical Specifications: - Control system with 15-inch touchscreen Iedpjzk N Dkjfx Ah Eetl - Pre-milling unit with 2 milling heads - Edge feeding unit - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensing nozzle - Press unit: pneumatic - Crosscut unit: pneumatic - Diamond cutters (left and right): with CM technology - Corner copying unit with diamond cutters - Surface scraper - Sanding unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Exhaust hoods for trimming unit - Multifunction milling unit: MOT 4 - Vertical feeler rollers: pneumatic - Pneumatic swivel mechanism for MOT 4 milling unit - MOT 2 planing unit with chip collection box - Spray system for the infeed and outfeed areas - Minimum workpiece length: 160 mm - Workpiece thickness: 6–60 mm - Edge thickness: 0.4–6 mm - Feed speed: 10 m/min - Overall length: 4930 mm - Weight: 1420 kg

Condition: refurbished (used), HANDTMANN VF-830 F.P.A. PCM The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. Machine with clipper socket. Machine with loading. Instrumentation: grease, grease gun, rotor key, funnel key, holding device key, scraper, set of funnels and technical documentation. Itsdpfx Asyxntcjh Eel Delivery time: 2 weeks WITH: Linking gearbox AG-410 Holding device HV-414

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM E.O. 2000 VACUUM PADDLE DRYER – PHARMACEUTICAL DESIGN – 2,380 L High-quality horizontal vacuum paddle dryer from COGEIM, Italy, in a pharmaceutical design. The dryer features a horizontal, heated/cooled stainless steel container with a large front-opening lid, as well as a robust paddle agitator with scrapers. The parts in contact with the product are made of stainless steel 1.4435, and the inner surfaces are highly polished. The system is suitable for demanding drying, mixing, and vacuum processes in the pharmaceutical, chemical, and fine chemical industries. TECHNICAL DATA Manufacturer: COGEIM, Italy Type: E.O. 2000 Year of manufacture: 1990 Project/Job No.: C.89/040 Working/Nominal volume: approx. 2,380 liters Total container volume: approx. 3,100 liters Container: Operating pressure: -1 / +6 bar Operating temperature: -20 / +165 °C Product-contact material: Stainless steel 1.4435 Inner surfaces: Highly polished Itjdpfxjr Nclae Ah Eel HEATING/COOLING SYSTEM The container can be heated or cooled via an external half-pipe coil. Volume of heating/cooling chamber: approx. 150 liters Operating pressure of heating/cooling chamber: up to +6 bar Material of heating/cooling chamber: Stainless steel 1.4306 Temperature range: -20 / +165 °C AGITATOR Robust horizontal paddle agitator with scrapers Large-area mixing of the product Agitator shaft seal via mechanical seal Laterally arranged gearbox/motor drive EQUIPMENT / SCOPE OF SUPPLY The existing scope of supply includes, among other things: - Filter for solids / dust filter - Feed device - Discharge valve - Rotary valve - Compensator - Drive and gearbox - Pneumatic fittings and components - Large front-opening lid - Support frame - Existing connection components - Existing technical documentation - Original installation/connection drawing The large front lid provides very good access to the interior and to the agitator for inspection, cleaning, and maintenance. CONDITION Used system in operational condition. The interior and the paddle agitator appear to be in very good condition in the available images. Technical documentation and original drawings are available. Further technical information, detailed photos, and excerpts from documentation can be provided upon request.

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply of max. approx. 250 L/min. at approx. 3.5 bar water pressure Transfer to the filter system is carried out by the customer, air and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from the clean tank to the dirty tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation particle size: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle content: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process sequence: fully automatic full-flow filtration Sludge discharge: fully automatic, with consistent consistency The dirty liquid is fed via customer-provided lifting stations. The chips and fine sludge produced during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. In the upper scraper section, the sludge is pre-dried. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Maximum volume: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm reinforcement Width: approx. 1,890 mm, including 140 mm reinforcement Height: approx. 1,105 mm, including 100 mm bottom profile Neck height: approx. 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive Itedezwccmjpfx Ah Ejl 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto angle frame), without ladder, without handrail, without internal access rungs Maximum volume: approx. 0.55 m3 9926ä

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Waste disposal system with a central Vecoplan rotary shredder The core of this waste disposal system is a high-performance Vecoplan rotary shredder, type 55/18/3. The system handles the fully automated shredding and processing of edgings, slabs, residual wood, and bark from sawmill production. All material flows are automatically detected, processed, and fed to the respective discharge systems – for efficient and continuous production. Isdpfxszwb Uno Ah Eetl Highlights High-performance Vecoplan rotary shredder 55/18/3 Continuous shredding of residual wood, slabs, and edgings Robust industrial design for multi-shift operation Integrated metal detection system to protect the machine Vibrating screen with separation into four material fractions Automatic conveyance of wood chips, sawdust, and bark Scraper chain conveyors and vibrating chutes for continuous material flow Complete electrical control system including system cabling Key technical data Drive power: 55 kW Infeed opening: 550 × 180 mm Rotor diameter: 600 mm Rotor speed: 730 rpm Throughput capacity: up to 10 cubic meters/h Wood chip length: approx. 25 mm Screen hole diameter: 30 mm Vibrating screen: 3 screen levels Material separation: 4 fractions

Condition: used, Pastochef Range Electrical power Power supply 400 V / 50 Hz / 3 phases Rated power 2 kW Fuse 10 A Crème Excellent: 6 to 15 kg per cycle Bavarian cream: 7 to 17 kg per cycle Fruit jam: 6 to 12 kg per cycle Chocolate tempering: 5 to 15 kg per cycle Ganache cream: 3 to 15 kg per cycle Choux pastry: 6 to 15 kg per cycle 46 dedicated programs and 5 free programs Dry bain-marie for heating and cooling Variable speed via inverter Display guiding through steps and temperatures Removable paddle and agitator scrapers Double lid with large hopper 3-position tap with double safety 4-position stainless steel shelf Management of power and water outages Rounded safety corners Cleaning by heating the cylinder Iedpfx Ahjzx Un Ro Ejtl Drying program after washing Dimensions 450 × 614 × 1110 mm Net weight 150 kg Air condenser available at extra cost Multifunction cooking machine Pastochef 18 RTL-I – up to 17 kg per cycle General description The Pastochef 18 RTL-I is a professional, multifunction cooking machine designed to automate numerous preparations in pastry, chocolate, ice cream, and gastronomy. It combines cooking, cooling, mixing, pasteurization, and preservation according to the selected programs. Each cycle guides the operator through the various steps, displaying temperatures and providing instructions for the gradual introduction of ingredients. Its capacity depends directly on the recipe being used, for example, 6 to 15 kg of Crème Excellent and up to 17 kg of Bavarian cream per cycle. What sets this model apart The Pastochef 18 RTL-I uses a dry bain-marie heating and cooling system, developed to limit the formation of deposits on the cylinder surfaces and maintain a consistent heat exchange. The inverter allows the stirring speed to be adapted to the preparation. The scrapers and removable paddle generate a vertical and horizontal helical movement to promote thorough mixing during the process. The machine has 18 pastry programs, 9 chocolate programs, 8 specialty programs, 7 gastronomy programs, 4 ice cream programs, and 5 free programs for recording custom cycles.

Condition: as good as new (ex-display), Year of construction: 2023, machine/vehicle number: AH00004861, functionality: fully functional, operating pressure: 6 bar, temperature: 15 °C, NEW OPTIONAL SEMI-INDUSTRIAL EDGEBANDER SEMI-INDUSTRIAL WITH SIMPLIFIED CONTROL PANEL Make: SCM Model: K360 T-ER1 Year: 2023-2024 CE AH00004861 MACHINING CAPACITIES : - Panel height: 8 - 50 mm Thickness: 10 to 45 mm with use of rounding tool - Length of panel to be clad: 210 to 2500 mm - Minimum panel width: 90 to 1100 mm - Roll edge thickness: 0.4 to 3 mm without rounding max 3 mm with rounding - Strip edge thickness: max 6 mm without rounding max 3 mm with rounding - Edge width: panel thickness +2mm on each side - Drive (feed speed): 11 m/min - Workpiece spacing: 600 mm - Part protrusion from transfer chain (panel protrusion): 30 mm MACHINE COMPOSITION : - Reel table - Predisposition to receive an air-cushion table - Work table with front extension - Drive belt: chain - Non-stick spray unit - Edge straighteners (2 routers) rpm Diamond tools - Gluing unit with interchangeable tray Pneumatic pre-cutter Marouflage (pressing) with 3 rollers (1 motorized) - Chop-saw butt-cutting unit - Nesting copying top/bottom trimming unit - Rounding unit - Radius scrapers - Straight scrapers - Edge finishing spray device (Nebulization) Itsdpettakhjfx Ah Eel - Textile polishing brush station - General power supply: 400v. Three-phase+N+T 50Hz Options installed on the machine : - 10.09.98 European safety standards (CE standards) - 63.05.29 Provision for an eventual air cushion plane at machine inlet - 62.15.02 "Nesting" copier kit - 62.12.03 "AAR" anti-stick group - 62.12.61 Nebulization device for edge finishing - 62.14.55 Diamond tools H=64 on grinding group - n.2 cuts - 62.15.06 "SGP-E" glue pot - Instead of the standard glue pot - 62.15.04 "RC-N" glue scraper group - 62.12.12 "SP-V" brush group Machine available : in stock

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Itodpfozx Sxgsx Ah Esl Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Itedpfx Ahslht Hzj Eel Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: used, Year of construction: 2010, Technical details: • Edge material thickness for strip material: 0.4–6 mm • Edge material thickness for coil material (depending on material): 0.4–3 mm • Edge material height: max. 65 mm • Workpiece thickness: 6–60 mm • Minimum workpiece width: 65 mm • Minimum workpiece length: 160 mm • Feed speed: 10 m/min • Integrated control panel on the front side, in the infeed area • Control system: PPC 221 – Power PC • Pull-out workpiece support table, extension: 600 mm • 1801 Pre-milling unit with diamond milling cutter (1 × 0.8 kW, 1 × 1.2 kW, 200 Hz, 12,000 rpm) • 1903 Edge band magazine, pre-cutting up to 3 mm • 1906 MG combined glue application unit (cartridge and granulate) • Pressure regulator for cartridge glue application with pneumatic control • 1912-3 Pressure roller unit • 1918 Pneumatic end-trimming unit • 1827 Multifunctional milling unit (pneumatic control) • 1832 Corner rounding/milling unit • 1929 Scraper unit, R = 2 mm • 1964 Flat scraper Specifications are provided for information only. Ijdpfx Aezxww Ueh Estl This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter Iodpozxn Nnofx Ah Eetl - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide Iedpfx Ahogtx Aqo Estl PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Technical information under subject of correction

Condition: used, Year of construction: 2017, mileage: 10,236 km, power: 24 kW (32.63 HP), first registration: 12/2017, overall weight: 2,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 09/2027, gearing type: automatic, number of seats: 1, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final confirmation, errors, typos, and prior sale: Hako CityMaster 600 with a new engine, sweeping brush with water and dirt tank, new engine, front-mounted mower, hopper spreader, snowplow (Vehicle 267) First registration: 14.12.2017 10,236 km 1,915 total operating hours, but now with a new engine! 971 brush operating hours Engine new in 2025, currently approx. 170 operating hours Engine: 1,642 ccm 24 kW / 33 hp 25 km/h approved Permissible total weight: 2,200 kg Unladen weight: 1,380 - 1,465 kg Overall length: 3,160 - 3,260 mm x overall width: 1,085 - 1,200 mm x overall height: 1,9985 - 2,202 mm Road approval Articulated steering 2 adjustable brush systems Turbine + water pump on/off Adjustable water quantity 3 speeds for operation Radio/CD Rotating beacon on driver's side, rear 2 headlights on top + 2 in the middle Rearview camera with monitor, additional camera for monitoring the suction nozzle, automatic switching during reversing Radio with Bluetooth for mobile phone and MP3 Repeating lights on cabin roof Distance sensor 7-pole control cable Universal tires 23.00x8.50-12 Trelleborg T539, front approx. 80%, rear approx. 90% Grammer comfort driver's seat with air suspension Universal suction container 600 L, hydraulically tilting, payload 500 kg, emptying height 142 cm, emptying width 865 mm Handheld suction hose for leaves, accumulated dirt, etc., foldable on the passenger side in the middle Universal quick-change roll container Vacuum gauge on container, for monitoring the suction power and indicating decreasing suction power when the maximum container filling level is reached, as well as a clogging indicator Sweeping unit: 2 brushes, hydraulically adjustable, sweeping width 110 to 180 cm, brush arms with 3-fold impact protection Disc brush made of plastic-steel Lightweight weed brush on the right Attachment: Suction nozzle, roll container sweeping unit Iodpfx Ahjzxkf Ej Eetl Universal front-mounted mower 122 cm (hydraulically driven 3-blade special mower with rear discharge, working width 122 cm, integrated pendulum compensation, four-wheel drive with cutting height adjustment in 1 cm increments from 4 - 10 cm, transport safety device for road travel) Attachment: Suction nozzle mower Attachment: Suction system (transfer device for connecting the suction nozzle) Hopper spreader KIF SS200 (single-chamber spreader with fully hydraulic drive, auger discharge, mixing shaft, and foldable spreading disc, loading capacity 200 L, manual control for spreading quantity and width, working width 1.5 - 4.0 m spreading disc, protection, and discharge chute made of stainless steel) Filling sieve, foldable cover, additional protective cover for Citymaster 600. Quick-change base frame for Citymaster 6009, spreader RAL 2011 and 2-layer interior coating, container attachment 130 L, to increase the loading capacity to 330 L for light spreading materials such as salt and granules. Spreading control from the cabin, spreading quantity, spreading width with automatic start/stop function Snowplow 135 cm with breakaway function, rubber scraper blade Inspection + TÜV (technical inspection) valid until 09/2026 Price: €29,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigsl

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 13341-T, total width: 1,420 mm, total length: 1,576 mm, total height: 1,100 mm, overall weight: 2,000 kg, cooling capacity: 20 kW (27.19 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, Equipment: cooling unit, The system was taken out of service a year ago due to a switch to a centralized system. One year before decommissioning, all TCF elements were replaced. Itsdpfxszxhcns Ah Ejl We can provide support for recommissioning. Technical data: - Total filter capacity approximately 210 l/min - Filter fineness approximately 3 μm nominal - Tank capacity approximately 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter columns - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system via a settling tank and scraper conveyor - In-line cooling via the return flow from the filter columns to the clean oil area via the plate heat exchanger, including flow control in the chilled water circuit - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 2 pcs. machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approximately 100 l/min - Delivery pressure: approximately 10 bar - Drive: 400V, 50Hz 2 pcs. drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approximately 30 l/min - Delivery pressure: approximately 6 bar - Drive: 400V, 50Hz 1 pcs. screwed plate heat exchanger with cooling control approximately 20kW Designed for cooling water 70 l/min, 13°C supply temperature.

Condition: good (used), Year of construction: 2003, Item: LC-1177-AlfaLaval-Conterm ALFA LAVAL CONTHERM 6X11 SCRAPED SURFACE HEAT EXCHANGER 13 x ALFA LAVAL CONTHERM SCRAPED SURFACE HEAT EXCHANGERS Manufacturer: Alfa Laval Type: Contherm Scraped Surface Heat Exchangers Quantity available: 13 units Condition: Used Location: Denmark We offer a total of 13 Alfa Laval Contherm scraped surface heat exchangers, available for sale individually, in smaller quantities, or as a complete package. Itodpfozvp Imex Ah Ejl Available Units 5 pcs. Alfa Laval Contherm 6X11 Model: 6X11 Year: 2003 Quantity: 5 units 8 pcs. Alfa Laval Contherm 6X9 Model: 6X9 Year: 1999 Quantity: 8 units Description Alfa Laval Contherm is a scraped surface heat exchanger designed for the continuous heating and cooling of products that can be difficult to process in conventional plate or tubular heat exchangers. The rotating scraper system continuously removes product from the heat transfer surface, helping to maintain efficient heat transfer and reduce product build-up. These units are particularly suitable for processing viscous, sticky, crystallizing, and heat-sensitive products. Typical Applications Dairy products Butter and margarine Cheese products Ice cream Sauces and dressings Fruit preparations Chocolate and confectionery products Viscous food products Crystallizing products Heat-sensitive products Other food and process industry applications Availability Total quantity: 13 units 5 × Contherm 6X11 – Year 2003 8 × Contherm 6X9 – Year 1999 The units can be purchased individually or as a complete lot of 13 units. Condition: Used Location: Denmark Delivery: EXW Denmark Availability: Immediately available Please contact us for price, additional technical information, dimensions, and photographs. A special package price is available for the purchase of all 13 units.

Year of construction: 1986, condition: good (used), Automatic operation Feed with position control, min. Cut-off length 8 mm, Feed stroke max. 400 mm, for cut-off lengths over 400 mm, the stroke is repeated until the set dimension is reached. until the set dimension is reached. The cut-off length is displayed digitally. The desired number of cuts can be preselected. Sheet tear control, Chip scraper brush, chip conveyor, roller conveyor, support length 3 m, 5 new saw bands Cutting range round: 320 mm Rectangular cutting area: 320 x 320 mm Saw blade dimensions: 5250/5350 x 32 x 1.1 mm Band speed: 15 - 110 m/min Saw drive: 380 V, 4 kW Isdpfx Aepxnkgsh Eotl Weight: 2200 kg Operating instructions, electrical and hydraulic circuit diagrams, Spare parts list

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Itjdpfx Aozvmx Ash Eel Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, Year of construction: 2006, Used Machine Year of Manufacture: 2006 Condition: Completely Overhauled Features and Technical Specifications: - Equipped with a new glue application system - Manually adjustable feed guide - Pre-milling unit 1961 - Edge feeder 1903 - Glue application station 1906 with sensing nozzle - Pneumatic press unit 1816 - Trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush) - Blower nozzle, complete - Scraper unit 1929 - Chip collection box - Surface scraper, 1964 - Exhaust hood set - Complete set of protective covers - Total length: 5291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge banding thickness depending on configuration: 0.4–5 mm - Edge banding height, max.: 55 mm - Edge banding strip length: min. 350 mm - Edge banding overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Exhaust: - Jointing unit: 900 m³/h - Milling unit: 280 m³/h - Scraper unit: 280 m³/h - Static negative pressure: - Joint milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Min. air velocity: 20 m/sec - Joint milling unit connection: 70 mm Isdpfx Ahjzk Nlhe Estl - Scraper connection: 70 mm - Compressed air: 6 bar Availability: available shortly Location: Röllbach

Condition: used, Used Becomix model Beco Mini RW 2.5 lab scale homogenising mixer.  Iedpeyx Ibgofx Ah Eotl Manufacturer: Becomix. Capacity: Working capacity 0.5-3.5L. Dimensions: 800mm x 800mm x 900mm high. Also includes: -Integrated CIP system. -Agitator with scrapers. -Intuitive touch panel PLC control.  -Compact device with tempering unit. -Vacuum pump. - PLC control integrated into a mobile table. -Mixing vessel full vacuum to 1 bar, double jacket 4 bar.

Condition: used, Year of construction: 2015, functionality: fully functional, workpiece height (max.): 60 mm, total length: 7,920 mm, warranty duration: 3 months, HOLZ-HER Edge Banding Machine ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Easy program changes and tool adjustments via the 18.5" touch control panel. Short heating time of the GlueJet adhesive system, approximately 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR glue and cleaning the system is extremely simple and can be done in just a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special features for materials with protective foil, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, which excels in operations with many different edge types. The DIA tools are multi-stage and can switch between radii and bevels as the situation demands – from the longitudinal milling unit to corner copying and profile scraper. The extendable workpiece support and extended infeed section help with large workpieces, and a guiding system assists in feeding small workpieces into the machine. Edge thickness (coil material): 0.4 – 3 mm (depending on material) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet, suitable for both EVA and PUR adhesives, with minimal effort. Handles all popular edge types, including high-gloss & supermatt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue amount control Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunction units for quick setup of radius, flush, bevel Vertical & horizontal spray units and much more. Delivery, installation, and machine commissioning can be arranged directly through us at an additional cost. The machine is currently located in our delivery warehouse in Gratwein, Austria. Itsdpfx Ahex Emf Do Esl In the event of discrepancies between the German version and any foreign-language version, only the German version is binding. Our general terms and conditions can be found on our website at holzher.de/de/agb.