Used Schneider Senator 92 E-Line for sale (74,539)

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Iedezimgtepfx Aa Ejti Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Year of construction: 2018, 434 USED Miwe Roll In e+, 6010 oven. Year of manufacture: 2016. EXTERNAL DIMENSIONS (in cm): - W: 139, - L: 152 (with hood: 230), - H: 256. Itedpfxezif E Io Aa Esi EQUIPMENT: - Gas burner, - 4 trolleys 58x78 cm or 58x98 cm with baking sheets for each oven. NOTE: We have a large stock of trolleys and baking sheets 58x78 cm and 58x98 cm for these ovens. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, mileage: 200,000 km, power: 92 kW (125.09 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 1,757 kg, maximum load weight: 1,743 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,504 mm, fuel: diesel, CO₂ emissions: 224 g/km, fuel consumption (urban): 9.7 l/100km, fuel consumption (extra-urban): 7.8 l/100km, fuel consumption (combined): 8.5 l/100km, color: blue, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 5,481 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), sliding door, soot filter, traction control, trailer coupling,

Condition: new, mileage: 2,628 km, power: 309 kW (420.12 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 13,355 kg, tire size: 315/80R22.5, axle configuration: 6x4, next inspection (TÜV): 06/2027, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6e, suspension: steel, number of seats: 2, total length: 7,650 mm, total width: 2,550 mm, total height: 3,190 mm, loading space length: 4,800 mm, loading space width: 2,410 mm, loading space height: 900 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, air conditioning, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, retarder, seat heater, tachograph, tire pressure monitoring, trailer coupling, truck registration, F - LINE 6X4 KH TIPPER Retarder, LED headlights, aluminum wheels, trailer package, technology package 3 Body description: Length (internal): approx. 4900 mm Width (internal): approx. 2410 mm (pallet width) Side panel height: 900 mm Front panel: approx. 1000 mm (subject to agreement) Subframe: fully tubular, with safety cable, with repair supports, front and rear tipping bearings from Leidinger, secured against accidental reversal Floor: 6 mm Hardox 450 steel Side walls: 4 mm Hardox 450 steel, M-JET design Left: hydraulically folding HYDROBOARD, 2 cylinders under the tipping floor Right: pivoting and folding, manually locked, with spring relief on the front panel Front panel: 4 mm S 700 steel, with short slope/chute Itodpezk H Rzofx Aa Eji Rear panel: 4 mm Hardox 450 steel, pivoting, opens automatically during the tipping process, with rear chute and dosing device (locking with pin) Stanchions: corner stanchions in a stable, fixed design (BORDMATIK) HYDRAULICS: • chromed tipping cylinders with pneumatic shut-off, manufactured by HYVA • main valve (control block) • pneumatic tipping actuator for the cab • with oil tank • with piston pump • with by-pass valve (due to auxiliary drive on the engine) • tipping trailer hydraulics: 2x pressure and 2x return line • with pneumatic changeover valve for tipper - trailer in the frame Additional equipment: • continuous aluminum mudguards for the 2nd and 3rd axles • tie-down points in the floor, 2 pairs of 8000 daN in the corners, with 4 pairs of folding tie-down points of 2000 daN in between, 1 pair on the front panel • underrun protection, folding, from KH, with spring relief • net hooks • broom and shovel under the floor • tie-down rods in the top rail of the side panels • contour marking Painting: • subframe bead-blasted, primed, and painted in chassis color • tipping body bead-blasted, primed, and painted in cab color

Condition: used, functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Jorns, controller model: CNC800, working width: 14,400 mm, throat depth: 1,000 mm, bending angle (max.): 144 °, bending radius (max.): 2 mm, bending radius (min.): 2 mm, type of crowning: manual, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance Z-axis: 980 mm, overall weight: 16,000 kg, total length: 15,260 mm, total width: 2,775 mm, total height: 2,003 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Jorns AG is neither the owner nor the possessor of the machine. The machine is being offered for sale on behalf of the customer (based in Sweden). If you are interested, the owner’s contact information will be provided. Please find below some technical parameters of the machine: Type: SUPER-LINE-300S-1000-RH-SO-OV-CNC800-14.4-SHS-SPEZ Serial number: K11005 Year of manufacture: 2011 Insertion depth: 1000 mm Working length: 14,400 mm Bending capacity: 3 mm mild steel, 4 mm aluminum, 2 mm stainless steel Number of clamping arms: 18 units Iedpfezk Dfpjx Aa Esti Number of linkages: 18 units, type 28 Number of bending cylinders: 18 units Number of clamping cylinders: 18 units Base construction: The machine is built from two pieces Control: CNC800 Backstop: Parallel backstop, type 91, built from two pieces, including six backstop fingers. Crowning: Manual crowning at every arm except the first and last Hydraulic system: Equipped with an axial piston pump, 130 l/min, 22 kW engine, max. 250 bar Condition of the machine Accuracy: The machine is in daily use and can be tested at the customer's site in Sweden. In its current condition, the machine achieves 90° +/- 2° bending results in 3 mm mild steel at full length using manual crowning. To increase the bending accuracy, all linkages would need to be replaced. The machine has the following defects: - The touch screen is defective. The machine is currently operated using a mouse. - The upper clamping tool has a dent that could be repaired on site by a Jorns technician. Service Jorns: We are happy to provide a quotation for new linkages, a new panel and support in installing the machine in another location.

Condition: used, HACO ATPL CNC plasma cutter – Used Itedpfxozky R Ij Aa Eei Robust CNC plasma cutter for precise and efficient cutting. Specifications: Cutting bed: 3,000 × 1,500 mm Cutting capacity: up to 50 mm CNC controlled Ready for immediate use

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, feed length X-axis: 3,000 mm, Equipment: CE marking, The Störi Mantel Leg Machine is an automatic device for producing the bottom parts of wooden pallets, also known as pallet bases or legs, which operates on the proven principle of electromechanical nailing. Itedpsubbu Uofx Aa Esi The main key features that will increase your production capacity, save on operational and personnel costs, and speed up the entire pallet nailing process include, for example, the production cycle speed, the possibility of integration with other equipment such as a cross-cut saw or pallet nailing machine, convenient operation of the entire machine by a single operator, and easy maintenance and servicing. The Leg Machine can be designed with a maximum leg length of 1 500 mm or 3 000 mm.

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data - Capacity: - 212 ml round plastic: up to 2,700 bph - 250 ml oval plastic: up to 2,700 bph - 1,000 ml round plastic: up to 900 bph - 1,000 ml oval plastic: up to 900 bph - Application: - Glass & PEHD (plastic) - Neck finish: - Screw-on caps Ø 30–40 mm - Twist-off caps - Formats: - 212 ml, 250 ml, 1,000 ml Isdpfx Aajyighie Esti Scope of Delivery  - Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min - Conveyor | Breitner | TP 6052 | 2006 | — - Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min - Rotary Sorter | Breitner | DS 8003 | 2006 | — - Feeder | Breitner | SFB 8001 | 2006 | — - Conveyor | Breitner | TPK 6042 | 2006 | — - Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min - Conveyor | Breitner | TPE 6032 | 2006 | —

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Itsdpfey Hlvwex Aa Eei Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Itedpfx Ajy Hlkboa Eji Condition – Not operational, out of action 3-4 months.

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Isdpfx Aasvtqace Eeti Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm Iodpfx Aowu Tu Doa Eoti 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Iodpfx Aaowu Dcxo Eeti Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: used, Year of construction: 2001, Display Program Airtable, Table left, Table right Itedpsyyvndefx Aa Eoi Available: at short term

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing Itodpfxozhub Ae Aa Eei - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Manufacturer - Carnitech A/S. Type - CT 2612. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Ijdpfsy Swi Hox Aa Eoti Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Year of construction: 2014, condition: refurbished (used), High-performance 40 Ton Triple tube drawing bench BÜLTMANN GKZ 400/3-16 Complete 40 tn triple tube drawing line, revamped by Bültmann in 2014. Includes extensive set of tooling and large spare parts package. This BULTMANN GKZ 400/3-16 Triple tube drawing line combines a robust 40-ton drawing capacity with significant upgrades completed in 2014, including a Siemens S7-400 PLC conversion, renewed machine bed, rebuilt puller, and upgraded drawing carriage. The line is available immediately and is suitable for demanding tube production applications. TECHNICAL SPECIFICATIONS Itsdpjzkf I Eofx Aa Eoi · Manufacturer: BÜLTMANN · Model: GKZ 400/3-16 Triple · Major overhaul: 2014 - Control cabinet overhauled - PLC converted to Siemens S7-400 - New Siemens drives - Machine bed renewed - Drawing carriage converted (wheels, damping, etc.) - New chain - Puller rebuilt · Material strength: 500 N/mm² · Input tube length: 2.5–12 m · Exit tube length: 3–16 m · Maximum drawing force: 400 kN (40 tons) · Maximum drawing speed: 80 m/min · Return speed: 120 m/min · Main motor power: 300 kW · Hydraulic power unit: 30 kW · Auxiliary drives: 7.5 kW · Tube diameter range*: 20–65 mm · Wall thickness range: 1–5 mm * Tube range produced by the previous owner. Tooling is available for this range and should be verified onsite. SCOPE OF SUPPLY - Complete drawing bench according to layout - Renewed machine bed - Upgraded drawing carriage - New chain - Rebuilt puller - Electrical system with Siemens S7-400 PLC and Siemens drives - Hydraulic system - Existing safety barriers - Large set of tooling (to be verified onsite) - Comprehensive spare parts package (to be verified onsite) - Documentation in digital and paper format BENEFITS ✓ High-capacity 40-ton drawing force for demanding tube production ✓ Modernized Siemens automation for improved reliability and maintenance ✓ Major mechanical refurbishment completed by BÜLTMANN ✓ Includes tooling, spare parts package, and documentation ✓ Immediate availability for rapid installation COMMERCIAL INFORMATION - Machine status: Dismantled - Video of the line in operation available - Delivery: Immediate | As is, where is Material strength: 500 N/mm² Input tube length: 2.5–12 m Exit tube length: 3–16 m Maximum drawing force: 400 kN (40 tons) Maximum drawing speed: 80 m/min Return speed: 120 m/min Main motor power: 300 kW Hydraulic power unit: 30 kW Auxiliary drives: 7.5 kW Tube diameter range*: 20–65 mm (*Produced by previous owner. Tooling available for that range. To be checked onsite) Wall thickness range: 1–5 mm

Condition: used, mileage: 90,864 km, power: 103 kW (140.04 HP), fuel type: gasoline, gearing type: mechanical, first registration: 12/2021, emission class: euro6, color: silver, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please do not hesitate to contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly at our premises. Itodpfozkfb Sjx Aa Eei Special features: Metallic paint Additional features: Airbag driver/passenger side, Anti-slip regulation (TCS), Instrument panel with LCD display, Audio system: Radio with RDS/MP3 including TFT display, GT-LINE equipment, Exterior mirrors electrically foldable, Exterior mirrors electrically adjustable, both, Exterior mirrors heated, Exterior mirrors in vehicle color, Bi-LED headlights, Turn signal integrated in exterior mirror, On-board computer, Brake assist, Chrome trim for side windows, DAB tuner (digital radio reception), Roof antenna in shark fin design, Black headliner, Roof spoiler, Parking assistance system rear, Automatic activation for headlights, Driving assistance system: active lane keeping assist (LKAS, Lane Keep Assist System), Driving assistance system: hill-start assist, Driving assistance system: drive mode selection, Driving assistance system: high beam assist, Driving assistance system: front collision warning with pedestrian detection, Driving assistance system: driver attention warning (DAW), Driving assistance system: rear cross-traffic collision warning (RCCW), Driving assistance system: lane change assist, Power windows with anti-pinch protection front, Power windows front + rear, Hands-free system Bluetooth, Luggage net / bag on front seat back, Luggage compartment partition (net), Luggage compartment cover / roller blind, Cup holders, Rear lights LED, Rear window heated, Rear window wiper, Interior mirror with automatic anti-glare function, Isofix mounts for child seat, Body: 5-door, Automatic climate control 2-zone, Head airbag system, Radiator grille black (high-gloss painted), Load compartment floor variable, Lumbar support seat front left and right, electrically adjustable, Heated steering wheel, Light alloy wheels, Center armrest rear, Center armrest front adjustable, Engine 1.4 Ltr. - 103 kW TGDI CAT, Multifunction steering wheel, Gasoline particulate filter (OPF), Parking brake electric, Pedals aluminum, Tire repair kit, Tire pressure monitoring system, Rear view camera, Low emissions according to emission standard Euro 6d-TEMP, Gear knob / selector lever leather, Side airbags, Seat belts front adjustable in height, Seat front left adjustable in height, Seat front right mechanically adjustable in height, Seat cover / upholstery: fabric / artificial leather, Seat heating front, Smartphone interface (Apple CarPlay & Android Auto), Sun visors with mirror (illuminated), Start/Stop system (ISG), Socket (12V connection) in center console, Bumpers in vehicle color, Touchscreen color display (7.0 inches), Door handles outside in vehicle color, Door handles inside chrome look, USB port + AUX-IN connection, USB fast charging port center console, Tinted rear windows (Privacy Glass), Warning system for seat belts rear, Warning system for seat belts, driver / passenger side, Heat-insulating glazing , Interior mirror automatically dimming, Rain sensor, Seat heating front The vehicle is located in our external warehouse, so please contact us to arrange a viewing. Thank you very much! Subject to price changes, typing errors, and errors, as well as sales.

Condition: used, Year of construction: 2019, functionality: fully functional, LISEC INSULATED GLASS LINE – Year 2019 LISEC IGU LINE H 2500 mm LH/RH Max. glass size: h2500 x 3500 mm Min. glass size: 350 x 180 mm Glass unit thickness: 12-80 mm Shapes: according to Lisec catalog Iodszhm Smspfx Aa Esti Thickness of flexible spacer: 8-25 mm Composed of: LISEC VHW-D25/V6 - automatic vertical washing and drying system for flat glass sheets Brush configuration: 6 brushes LISEC RSVN-35/25U - automatic vertical station for inspection and positioning of spacer frames LISEC VSA-35/25 - fully automatic vertical system for the application of flexible spacers LISEC SSV-25 - automatic robot for sealing and closing the last corner LISEC FPS-35/25U2B - fully automatic vertical press for lamination, flat pressing, and gas filling (Argon or Krypton) LISEC VL-1N/25 - fully automatic vertical extrusion and sealing robot LISEC DOS-1TH - high-pressure dispensing and mixing station for two-component sealants (such as polyurethane, polysulfide, or silicone).

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller -Type: 9210 33.9212 E.4F -Input: 460 V 50/60 Hz -Output 620 V 7 A -Dimensions: 440/125/H310 mm Isdpfxsdngwqj Aa Ejti -Weight: 7 kg

Condition: good (used), Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton Isdpfx Aaor H Nllo Eoti -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Iedpfx Aoqmt Aysa Ejti -Manufacturer: May & Christe, transformer type T 40 E 5113.0920.208 -Power: 1000/4600 VA -Technical data: see photo nameplate -Dimensions: 160/150/H140 mm -Weight: 13.8 kg

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: with ETP Hydro-Grip -Outer: Ø 180 mm -Height: 46 mm -Socket: Ø 40 mm -Number: 2x milling cutters available Itedpfxjcazrve Aa Esi -Price: per piece -Weight: 10 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Module from Kern 2600: SIGR Continuous Forms Cutter right with K2600 Options Station Iodpfoy Iwn Ujx Aa Eeti

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Iedpoyh Hc Rjfx Aa Ejti