Used Potentiometer for sale (196)

Year of construction: 1990, condition: good (used), machine/vehicle number: 2ß90 522, Technical specifications: Lredpfx Afsfndg Eetop - Bending capacity: - Steel pipe: Ø 20 - 60 x 4 mm - Stainless steel pipe: Ø 20 - 50 x 3 mm - Max. bending moment: 6.2 cm - Max. bending angle: 180° - Max. radius: 125 mm - Bending speed: 8 sec - Drive: 400 V / 3 kW - Space requirement: approx. L 2400 x H 1600 x D 1000 mm - Weight: approx. 1400 kg - Includes: - Bending angle control via potentiometer with digital display - 6-fold preselection of bending angles - Internal + external pipe deburring tool - Bending tools Rx2.5D: Ø 38; Ø 50; Ø 65;

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection Lredpsyug R Rjfx Aftjp • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. Lodpfxsyug Hxe Afterp The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 121386, Weinig automatic infeed system For continuous feeding of uniform and random length pieces into a planer/moulder with short infeed table. Ljdpfx Asyt R S Neftorp Flat magazine with accelerator, Workpiece dimensions: 1800 - 6100 mm Touch control for forward and reverse movement 4-roller accelerator. With four driven feed rollers. The first two feed rollers are electro-pneumatically moved via light barrier. Drive motor frequency controlled 3 kw Infeed speed 10 - 120 m/min. Height adjustment to workpiece thickness manually via hand crank The accelerator is operated from the control panel fitted to the accelerator. The feed speed is adjusted by a potentiometer with digital readout. Transport length x width approx. 1800 x 6500 mm Possible to supply with moulder Powermat 2400, year of production 2015 The price of a complete set 69000

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Lrsdpoyhqhtjfx Aftjp Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bent rail and machine in top condition Weight: approx. 3000 kg

Condition: new, Year of construction: 2025, machine/vehicle number: MOT01-300, coil inner diameter: 250 mm, coil outer diameter: 1,450 mm, coil weight: 1,000 kg, coil width: 300 mm, product width (max.): 300 mm, overall weight: 300 kg, load capacity: 1,000 kg, spreading range: 250 mm, Automatic coiler or decoiler Remote control console - wireless Automatic and manual working mode Speed fine tuning potentiometer Danfoss inverter Synchronized easily with punching line Ideal for stamping automatic lines Coiler motorized Central expansion Run both directions, forward and reverse Loop sensors control Speed from 0.1 RPM to 28 rpm Motor with gear reducers Ljdpfxjb H R Ayo Aftjrp Capacity max. load 1 ton Strip width up to 300 mm Inner diameter min 250 mm max. 520 mm Outer diameter max. 1450 mm Power 0.75 KW Dimension 1.200 mm x 1.200 mm height 1.600 mm Weight cca. 300 kg with CE certificate On stock also high speed presses Schaal, Mabu and Bruderer presses as well bas band saw blade welders

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Lodpfsvaatfex Aftorp Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Lrodpfxoum Ttze Aftop Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1: Ø 40 mm Max. drilling capacity for gray cast iron (GG 20) under continuous operation S1: Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1: M 33 Max. threading capacity for gray cast iron (GG 20) under continuous operation S1: M 39 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 180 mm Spindle motor power: 4.12 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 480 mm x 480 mm Column diameter: 150 mm Distance spindle center / column: 350 mm Machine weight (net): 470 kg Gross weight: 520 kg Dimensions of transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Electromagnetic clutch Ergonomic 4-way handle cross with integrated feed buttons Scale with adjustable drilling depth Automatic feed reversal when threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base with machined support surface, T-slots, and integrated coolant system Lsdpsgy Haasfx Aftjrp Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, switching electronics in the low-voltage range Color: RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 50 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 60 mm Max. thread cutting capacity for steel (St 60) under continuous operation S1 M 42 Max. thread cutting capacity for grey cast iron (GG 20) under continuous operation S1 M 50 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 200 mm Spindle motor power 4 kW Drive 3-speed gearbox and V-belt Speed adjustment stepless via potentiometer Speed range for 50 Hz motor, n = 1,500 rpm 30 – 300; 90 – 900; 190 – 1,900 rpm Feed automatic or manual Number of automatic feeds 4 speeds Range of automatic feeds 0.1 – 0.2 – 0.3 – 0.4 mm/rev Table dimensions (width x depth) 550 mm x 550 mm Column diameter 175 mm Distance spindle center / column 360 mm Machine weight net/gross 760 kg / 850 kg Dimensions of transport packaging (length x width x height) 2.4 m x 0.7 m x 1.3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with high-quality gears and automatic oil pump lubrication and V-belt 3 gearbox speeds can be preselected via 1 front lever 3 speed ranges with stepless speed adjustment via frequency converter digital speed display integrated in the front panel 4 automatic feeds electromagnetic clutch Lsdpegy Halefx Afterp ergonomic 4-way handle cross with integrated feed buttons handwheel for fine manual feed scale with adjustable drilling depth, automatic tool ejector adjustable, rotatable and tiltable work table (Type MGI) machine base plate with machined support surface, T-slots and integrated coolant system automatic feed reversal during thread cutting integrated lighting, EMERGENCY STOP button chip guard with microswitch monitoring thermomagnetic motor protection, switching electrics in the low voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance instructions

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) under continuous operation S1 Ø 40 mm Max. drilling capacity for grey cast iron (GG 20) under continuous operation S1 Ø 45 mm Max. threading capacity for steel (St 60) under continuous operation S1 M 33 Max. threading capacity for grey cast iron (GG 20) under continuous operation S1 M 39 Tool holder in the spindle MK 4 Max. spindle stroke (drilling depth) 180 mm Motor power, spindle 4.12 kW Drive V-belt Speed adjustment stepless Speed range for 50 Hz motor, n = 1,500 rpm 100 - 2,000 rpm Feed automatic or manual Number of automatic feeds 3 gears Range of automatic feeds 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm Column diameter 150 mm Distance spindle center / column 350 mm Machine weight (net) 460 kg Gross weight 510 kg Dimensions of transport packaging (length x width x height) 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Ledpfx Asgy E U Deftjrp Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during threading Automatic tool ejector Adjustable, rotating, and tilting work table (Type MGI) Machine base plate with machined support surface, T-slots and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in the low-voltage range Color RAL 7004 (signal gray), RAL 9011 (graphite black) Documentation, operating and maintenance manual, CE

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 34 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) at continuous operation S1: Ø 34 mm Max. drilling capacity for grey cast iron (GG 20) at continuous operation S1: Ø 40 mm Max. thread cutting capacity for steel (St 60) at continuous operation S1: M 27 Max. thread cutting capacity for grey cast iron (GG 20) at continuous operation S1: M 33 Tool holder in the spindle: MK 4 Max. spindle stroke (drilling depth): 150 mm Spindle motor power: 3 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 - 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 speeds Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 420 mm x 400 mm Column diameter: 125 mm Distance spindle center / column: 300 mm Machine weight (net): 360 kg Gross weight: 410 kg Dimensions transport packaging (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASE MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal during thread cutting Automatic tool ejector Adjustable fixed work table (Type MF) Machine base plate with machined support surface, T-slots, and integrated coolant system Lrjdpfx Asgy E S Ejftjp Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermo-magnetic motor protection, control circuitry in low-voltage range Color: RAL 7004 (signal grey), RAL 9011 (graphite black) Control circuitry in low-voltage range Documentation, operating and maintenance instructions

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 0,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 760 x 600 x 2000 mm Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation Ledpsvzhd Uefx Aftsrp - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, Year of construction: 2023, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min Lodpfx Afot U Sc Rjterp column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system Lodpfet U Scqex Aftsrp - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: used, Electric chain hoist, KITO WLL 240 Manulift crane Manufacturer: KITO Yamanashi, Japan Code No. EDC 24SD Serial No. Year of manufacture 2018 Load capacity 240 kg Hook travel 2 meters Distance from suspension to load hook 850 mm Lredpfowbvmpsx Aftsp Lifting speed 3 to 12.9 m/min. Power supply 230 volts, 50 Hz - Cylinder handle control with potentiometer for speed adjustment - Safety limit switch - Emergency stop Weight 18 kg Very good condition

Condition: used, Conveyor belt, belt conveyor, belt feeder, band conveyor MFP Fördertechnik Year of manufacture: approx. 2015 Usable length: 2500 mm Belt width: 250 mm Belt length: approx. 5200 mm Frame profile height: 50 mm Return roller diameter: 20 mm Belt speed: approx. 5 m/min to 40 m/min Conveyor belt height: approx. 1000 mm Motor power: 140 watts Power supply: 230 volts, 50 Hz - Stepless belt speed adjustment via potentiometer on ROFRE frequency converter, type 897 - Reversible operation (forward/reverse) - Belt drive by INTERROLL drum motor - Sturdy steel sheet construction with closed steel plate underneath the conveyor belt - 1 piece height-adjustable HAACON base with hand crank, conveyor height approx. 1000 to 1200 mm - HAACON base mounted on steel plate: length 500 mm x width 450 mm x thickness 20 mm - 1 piece fixed support foot without height adjustment as a transport support Ledpfx Asxf Uqloftorp - Fully mobile on swivel castors Overall dimensions (L x W x H): 2570 x 400 x 1050 mm Weight: 115 kg

Condition: used, Electric chain hoist, electric chain block, crane KITO type WLL 240 Manulift Manufacturer: KITO Yamanashi Japan Code No. EDC 24SD Serial No. Year of manufacture 2017 Load capacity: 240 kg Hook travel: 2 meters Distance from suspension to load hook: 850 mm Lifting speed: 3 to 12.9 m/min Mains connection: 230 Volt, 50 Hz - Cylinder handle control with potentiometer for speed adjustment - Safety lifting limit switch - Emergency stop Weight: 18 kg Very good condition Lodpfotqgn Dsx Aftorp

Condition: used, Electric chain hoist, KITO crane type WLL 240 Manulift Manufacturer: KITO Yamanashi Japan Code no.: ED 24ST Serial no.: Year of manufacture: 2008 Load capacity: 240 kg Hook lift: 2.7 meters Distance suspension to load hook: 950 mm Lifting speed: 3 to 12.9 m/min Power supply: 230 Volt, 50 Hz - Cylinder handle control with potentiometer for speed adjustment - Safety upper limit switch Lsdpfx Aeu Invusftsrp - Emergency stop Weight: 18.5 kg In very good condition

Condition: used, Max. bending length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via limit switch Lsdpfx Afsudqd Rsterp Manual backgauge Weight: approx. 1000 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper cheek stroke: 350 mm Lredpfox Ebt Tex Aftsp Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lredpfexz Emvex Aftop Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

Year of construction: 2023, condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill press, drilling capacity in steel: 12 mm Drill chuck mounting: B16 external taper, spindle stroke: 40 mm, overhang: 200 mm, column diameter: 50 mm, usable table surface: 300x240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-base plate min./max. 110/250, manual feed, machine height without options: 670 mm, net weight: 64 kg. - Speed infinitely variable 250-5000 rpm Standard equipment: 5" TFT-LCD display with touch function: manual input of target spindle speed, display of actual speed, integrated depth gauge with touch function for zeroing, virtual depth scale on the display, machine status indicators and warning messages on the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC motor 230 volts, 50 Hz, connection plug pre-assembled, cable length 2 m, three separate buttons for clockwise rotation - counterclockwise rotation - stop, Lsdpfxolub Rde Aftorp Spindle stop via braking function, spindle guard with electrical protection, main switch lockable, mushroom push button (self-locking) for EMERGENCY STOP, speed adjustment continuously variable via potentiometer, protection class IP54, spindle guard with electrical protection, paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine light, item no. 12. Delivery time: from stock, Waiblingen/Beinstein

Condition: used, Year of construction: 2000, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment - Tablet tool Enables testing of: Hardness Diameter Thickness Weight Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Lodsx Rz I Dspfx Aftorp Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Drive: stepper motor. Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, Lrsdpogwct Defx Aftsp • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.