Used Plastic Parts for sale (19,712)

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer Fgsdpfx Aszh Dqmjlbsg The X7 prints industrial-grade fixtures, jigs, tools, and end-use parts. Designed for production environments, it prints parts that are stronger than machined aluminum, at a fraction of the cost. It combines superior surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with the adaptive manufacturing technology Blacksmith, which is only available on the X7. Technical specifications: Printer features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm accuracy Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, Fiberglass, Aramid fiber (Kevlar®), HSHT Fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill: several geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: 2-factor authentication, org-admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 Sale from current location Condition: used Scope of supply: (See pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 partially used rolls of Onyx filament (Subject to change and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, machine/vehicle number: 651 (4531040), Year of construction: 2008, For sale is a Palfinger work platform made of GRP (manufacturer: GFK‑Technik, M. Langer), ideal for maintenance, assembly, and service work, especially in electrical environments. The platform offers insulation protection up to 1,000 V and is therefore suitable for work near electrical installations. Note: The Z 147 platform exchange system is required for use. Only for vehicles > 7.5 tons. Features & Advantages Material: GRP (glass fiber reinforced plastic) – corrosion-resistant, lightweight, durable Access: Folding ladder with safety handrail for safe entry Optional equipment: Aluminum tool tray (700 x 100 x 90 mm) Technical Data Manufacturer: GFK‑Technik, M. Langer (Palfinger) Manufacturer's part number: 651 (4531040) Year of manufacture: 2008 Dimensions (L x W x H): approx. 1,630 x 900 x 1,100 mm Load capacity: 300 kg Insulation protection: up to 1,000 V Required system: Platform exchange system Z 147 Fjdozhkwgjpfx Albogg Access: Folding ladder with safety handrail Condition Used, well-maintained, functional. Inspection possible by arrangement.

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 Fgodpjzn I N Hjfx Albjg • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: good (used), functionality: fully functional, mileage: 682,000 km, power: 353.04 kW (480.00 HP), first registration: 06/2018, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, car registration, central locking, compressor, fog lights, low noise, navigation system, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, spoiler, traction control, IVECO STRALIS MY2016 AS 440S46 EVO – CHASSIS WJMM62AT20C392089 – LICENSE PLATE GM579RZ YEAR 2018 – EURO 6 – 682,000 KM Color: SIGNAL BLUE (similar to RAL 5005) Cab: ACTIVE SPACE – STRALIS EVO Fjdpfx Aeykih Rslbogg Engine: CURSOR 11, 460 HP Tyres: size 315/60R22.5 STRUCTURE: Wheelbase 3,800 mm, Double Bunk, Rear Air Suspension, ZF 12-speed Transmission 12TX 2210 TD – Payload 9,700 kg – GVW 18,000 kg – Towing Capacity 3,570 kg TRUCK EQUIPMENT: Rear Air Suspension, ZF 12-speed Transmission – 12TX 2210 TD, Hydraulic Retarder, Parking Air Conditioner, Automatic Climate Control, Independent Air Heater, Electronic Brake System + Brake Assist System, AEBS (ABS+ASR) + BAS, ESP, Adaptive Cruise Control, Hi Cruise (Predictive GPS), Lane Departure Warning System (LDWS), Ecofleet, Hill Hold, IVECO Connect, Expansion Module, Pneumatic and Heated Driver’s Seat, Sun Visor, Roof Spoiler + Side Spoilers, Plastic Parts Painted to Match Cab Color, 80 L Heated AdBlue Tank, Immobilizer, Central Locking, Integrated Fog and Driving Lamps BODYWORK: TRACTOR UNIT

Condition: used, Year of construction: 2004, machine/vehicle number: PR25, Used NEGRI BOSSI 850T injection molding machine - Year 2004Technical Specifications & Performance DataThis NEGRIBOSSI U850 Injection Molding Machine delivers high-tonnage performance for large-shot applications and precision molding. Configured with a 100 mm screw, it offers robust shot volume and clamping power, making it suitable for industrial packaging components and beverage production accessories. Manufactured in 2004, the machine integrates proven NEGRIBOSSI engineering with an EUROMAP 8500H-6500 injection unit and a user-friendly HMI.Model: U850 (EUROMAP 8500H-6500)Clamping force: 8500 kNScrew diameter: 100 mmShot volume: 3925 cm3Shot weight (PS): 3570 gMaximum shot weight: 3750 gInjection pressure: 1670 barBetween tie-bars (H x L): 1140 x 1020 mmPlaten size (H x L): 1670 x 1580 mmMould height (min–max): 400–1100 mmOpening stroke: 1200 mmEjector stroke: 399 mmHydraulic operating pressure (mould/injection): 180 barMotor-pump power: 74 kWPlasticizing power (100 mm): 37 kWHeating power (100 mm): 37 kWTotal installed power (100 mm): 198 kWCore pullers: 2Robot interface: YesAir circuit: 1Electric dosing motor: YesMachine dimensions (L x W x H): 11550 x 2600 x 2305 mmMachine weight: 39600 kgAdvanced Automation & Control SystemsThe U850 features a modern HMI with clear operational menus and diagnostic pages to streamline setup and production. The machine supports robot interface connectivity for automated part removal and downstream handling. Electric dosing and precise plasticizing power ensure stable melt quality and repeatable cycles. Safety controls and process monitoring are integrated through the control interface to maintain consistent, high-quality output.HMI control: multi-page interface with technical characteristics viewAutomation: robot interface enabled for pick-and-place and cell integrationPower architecture: motor-pump 74 kW; plasticizing and heating 37 kW each (100 mm configuration)Process monitoring: live readouts for temperature, times, positions, and pressuresProduction Line Integration CapabilitiesThis injection molding machine integrates seamlessly into industrial packaging and beverage production environments, supporting automated cells with robots, conveyors, and quality control stations. Its robust clamping unit and generous tie-bar spacing accommodate multi-cavity molds for components used in used bottling line refurbishments and second hand production setups.Compatible with automated part removal robots and conveyors Fgsdpfx Alezkht Djbog

Condition: used, Year of construction: 2021, operating hours: 25 h, functionality: fully functional, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Fgsdozn I Ucjpfx Albsg Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: used, Vickers Drive DBM-03 / DBM-L2A / CG1616 03- for 2 axes: 25/70 ECC 50/140 ECC - removed from Ferromatik E50 - removed from running machine - fully functionalmanufacturer: Vickers Fjdsyxg Tzspfx Albjgg type: DBM-03 / DBM-L2A manufacturer no.: CG1616 03 spare part no.: 1676559190

Condition: used, Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Fjdjzn Na Tjpfx Albegg Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F - removed from running machine - fully functionalmanufacturer: B&R manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Fgodpfxew Ah Nre Albog

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter Fgedpjwugczofx Albsg 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Riva Calzoni Hydromotor MR350/350/46852 250bar – removed from Ferromatik MV 200-970 - taken from a running machine - fully functional Fgjdpew Ah Riofx Albeg Manufacturer: Riva Calzoni Type: MR350/350/46852 Spare part no.: 10098158

Condition: used, Rexroth proportional directional control valve with regulator- removed from Demag Ergotech El-Exis S 60/370-310 Fedpfxjyxg S Dj Albjgg - removed from running machine - fully functionalmanufacturer: Rexroth type: NG10 spare part no.: 10848665 manufacturer no.: R900969493, R900031884 type code: 4WRSE 10 Q00-3X/G24K0/A1V-588=DE (4WRSE 10 Q00-32/G24K0/A1V-588=DE) / 4WRSE 10 V.-A1-32The number before the first slash describes the device series. For this reason, this number in the type code may differ from that on your old spare part. If you have any questions about this, please do not hesitate to contact us.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions Fodpfxjw U N Ixs Albogg CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: used, Year of construction: 2010, operating hours: 66,000 h, machine/vehicle number: PR23, Used NEGRI BOSSI 800T injection molding machine - year 2010Technical Specifications & Performance DataThis Negri Bossi VECTOR 800T injection molding machine delivers high-output performance for large-format plastic parts and packaging components. As a second hand industrial machine from 2010, it combines robust mechanical design with generous mold space and powerful injection characteristics, ideal for heavy-duty applications and supporting upstream production for industrial packaging and beverage production accessories.Manufacturer: Negri BossiModel family / code: VECTOR 8000H8400 (V800 designation)Year: 2010Working hours: 66000Screw diameter: 110 mmShot volume: 5160 cm³Shot weight: 4700 gInjection pressure: 1620 barEjection stroke: 350 mmTie bar spacing (H x W): 950 x 1100 mmPlaten size (H x W): 1400 x 1550 mmOpening stroke: 1080 mmMold height (min–max): 400–1100 mmCore pull circuits: 4 (2+2)Air circuits: 4Robot interface: YesMachine dimensions (L x W x H): 10850 x 2600 x 2305 mmMachine weight: 38750 kgAdvanced Automation & Control SystemsThe VECTOR platform is engineered for reliable automation and process stability. This unit is equipped with a robot interface for seamless cell integration and features multiple core pulls for complex tooling strategies. The electrical screw motor option provides precise dosing control and energy-efficient plasticizing.Integrated robot interface for automated part removal and in-mold operations4 core pull circuits (2+2) to support advanced mold functions4 pneumatic air circuits for auxiliary tooling requirementsElectrical screw motor option for accurate dosing and repeatabilityProduction Line Integration CapabilitiesThis injection molding machine can operate as a standalone cell or integrate within a broader industrial packaging workflow. It is well-suited for producing large or multi-cavity parts used in packaging systems and can support upstream manufacturing for components associated with a used bottling line or beverage production environment.Inline or standalone operation with engineered robot interfaceAccommodates complex tooling and multi-cavity moldsCompatible with automated conveyors, part handling, and quality stationsSupports format changes through mold/tooling exchange and core pull configurationMachine Condition & Maintenance HistoryThis second hand Negri Bossi injection molding machine from 2010 shows 66000 operating hours. Presented in working condition and ready for operation, it is suitable for facilities seeking proven performance and reliable uptime within industrial packaging or component manufacturing.Operational status: Ready for ... Fsdsziyy Tepfx Albogg

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: Fsdpfxeyw Aa Ue Albogg - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables Fgsdpfjxdy R Iex Albog like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: used, functionality: fully functional, Automated Assembly Fixture for Filter Inserts – Suitable for Arburg Injection Molding Machines For sale is a complete assembly fixture that was previously mounted on an Arburg injection molding machine. The unit was used to precisely and automatically insert filters into plastic components. It features a modular design, making it suitable for integration into existing production lines or as a foundation for new automation projects. Features & Components - Sturdy frame constructed from aluminum item profiles Robust, modularly extendable, and easily adaptable - Siemens control unit Industry-grade PLC for reliable, repeatable processes - Festo valves & pneumatic cylinders Fgedpsx Sqkkofx Albsg Multiple cylinders and solenoid valves, neatly installed and easily accessible - Integrated conveyor belt for removal or onward transfer of finished parts - Protective enclosure & safety components Partially glazed panels, safety doors, emergency stop button - Complete electrical & pneumatic systems Control cabinets, sensor cabling, pneumatic distribution Condition The unit is used but technically complete. It was last in productive operation before being dismantled and stored dry. Some cables are loose or need to be re-organized. Ideal as a retrofit project or for plant engineers, prototyping, or special-purpose machinery construction. Fields of Application - Filter assembly - Automated placement processes - Pick-and-place applications - Handling on injection molding machines - Special-purpose machine construction / automation technology The control unit is fully functional. No documentation is available.

Condition: ready for operation (used), Year of construction: 2024, operating hours: 2,489 h, travel distance X-axis: 400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 440 mm, number of axes: 3, This 3-axis HAGE 3D Mex-One-A was manufactured in 2024. It features a build area of 400 mm x 600 mm x 440 mm and a heated print bed that reaches up to 180 °C. The machine is designed for unmanned 24/7 operation and includes an advanced filtration system for effective exhaust air purification. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Mex-One-A plastic 3D printer we have for sale. Contact us for further details. • Fused Filament Fabrication (FFF/FDM) • Total Machine on Hours: 4,294 h • Extruder 1 Hours: 1,914 h • Extruder 2 Hours: 575 h • Total Printing Hours: 2,489 • Heated Build Chamber: Up to 100 °C • Heated Print Bed: Up to 180 °C • Maximum Nozzle Temperature: 450 °C Fgsdpfx Aszk Erqjlbsg • Layer Thickness: From 0.05 mm • Traverse Speed (XY): Up to 250 mm/s • Printing Speed: Up to 200 mm/s • Build Rate: Up to 150 g/h • Print Head: Water-cooled Dual DSD • Extrusion Pressure: Adjustable • Nozzle Diameter: 0.1–1.0 mm (0.4 mm standard) • Inactive Nozzle Lift: Free stroke • Part Cooling: Up to 4.8 m³/h • Automatic Print Bed Calibration: Multi-point topography measurement • Exhaust Air Purification: Activated carbon and HEPA filtration • Engineering Plastics Capable: Yes • CE Marked: Yes Drying Chamber (DCU), 2024 (optional, not included) • Internal Dimensions (X/Y/Z): 630 × 390 × 260 mm • Capacity: 3 Movable Small Spools (Upper Section) • Capacity: 2 Movable Large Spools (Lower Section) • Maximum Drying Temperature: 100 °C • Filament Feed: Direct Feeding from the Chamber with up to 4 Spools • Automatic Air Exchange and Moisture Removal • Tempering Chamber Internal Dimensions (X/Y/Z): 418 × 601 × 401 mm • Loading Areas: 3 Loading Positions for 600 × 400 mm Sheets or Grids • Maximum Tempering Temperature: 200 °C • Simultaneous Operation of Drying and Tempering Chambers • External Dimensions (X/Y/Z): 1,600 × 695 × 580 mm • Total Weight: Approx. 100 kg • Control: Siemens LOGO! • Maximum Power Consumption: 6 kW • Electrical Connection: Three-Phase AC 230 V, 16 A Fuse per Phase

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tool from DK Fixiersysteme 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Fodsyuut Tspfx Albegg Incident light illumination via LED ring light, 4 sectors and 1 ring individually switchable Precision measuring table in X and Y axes Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow switching Camera-supported measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and portable – powerful performance Easy handling with maximum measurement accuracy Special features Including Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels especially in the measurement of stamped, plastic, rubber and milled parts as well as tools, profiles, and PCBs. Key features of the measuring microscope include camera-assisted data acquisition, quick operation, and its high precision. Of particular note is the precise edge detection in transmitted and reflected light, powered by smart image processing algorithms. Despite its powerful capabilities, the WM 1 300 CNC remains compact and handy with dimensions of 900 mm × 950 mm × 950 mm.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Fedpfxozuyplo Albogg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice Fodjuiy Nyjpfx Albegg - Delivery and installation on your premises - Training of your employees

Condition: used, Arburg unscrewing unit Model: 118044 Machine number: 12915769 Year of manufacture: 2010 Condition: used Functionality: fully functional Description Fedpfx Alszpzh Sobegg The used unscrewing unit (2 directions, for 270C / 370C) from Arburg is used to automatically demold plastic parts with internal or external threads from the injection molding tool by precisely unscrewing the thread core during or after the opening process. Medium size Dimensions: 150x250x400 mm Weight: 30 kg

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX injection molding machine Year of manufacture: 2010 We offer a high-class hydraulic injection molding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system with a color monitor, an integrated operator panel, and three USB ports. Thanks to its robust construction and high performance, it is perfectly suited for the production of thermoplastic parts. Equipment Fully hydraulic clamping system MC5 control system with color monitor Integrated control panel 3 USB ports Complete plasticizing unit for thermoplastics Ø 70 mm screw made of wear-resistant material Backflow valve Open nozzle Technical data Clamping unit Parameter Value Clamping force 3000 kN Mold opening force 169.3 kN Plate movement force – opening 86.3 kN Plate movement force – closing 67.8 kN Dimensions of mounting plates (h × v) 995 × 1050 mm Clearance between columns (h × v) 630 × 630 mm Mold opening stroke 820 mm Minimum mold height 330 mm Maximum opening stroke of plates 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection unit Parameter Value Screw diameter 70 mm Maximum injection pressure 1877 bar Injection volume 1078 cm³ Injection weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220 / 310 rpm Electro-hydraulic system Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Number of dry cycles (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and weight Parameter Value Fodpfx Asza Uuzolbegg Net weight 14.5 t Dimensions (l × w × h) 6.5 × 2.2 × 2.3 m

Condition: good (used), functionality: fully functional, mileage: 735,000 km, power: 353.04 kW (480.00 HP), first registration: 06/2018, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, car registration, central locking, compressor, fog lights, low noise, navigation system, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, spoiler, traction control, IVECO STRALIS MY2016 - CHASSIS WJMM62AT20C392359 – PLATE GM580RZ YEAR 2018 – EURO 6 – 735,000 KM Color: SIGNAL BLUE (similar to RAL 5005) Cab: ACTIVE SPACE – STRALIS EVO Engine: CURSOR 11, 460 HP Tyres: size 315/60R22.5 STRUCTURE: Fedpsykid Eofx Albjgg Wheelbase: 3800 mm, Double Bunk, Rear Air Suspension, ZF 12-speed gearbox 12TX 2210 TD – Payload 9,700 kg – GVW 18,000 kg – Towing Mass 3,570 kg TRUCK EQUIPMENT: Rear Air Suspension, ZF 12-speed Gearbox – 12TX 2210 TD, Hydraulic Retarder, Parking Air Conditioner, Automatic Climate Control, Independent Air Heater, Electronic Brake System + Brake Assist System, AEBS (ABS+ASR) + BAS, ESP, Adaptive Cruise Control, Hi Cruise (Predictive GPS), Lane Departure Warning System (LDWS), Ecofleet, Hill Holder, Ivecoconnect, Expansion Module, Pneumatic and heated Driver’s Seat, Sun Visor, Roof Spoiler + Side Deflectors, Plastic Parts in Cab Color, Heated 80L AdBlue Tank, Immobilizer, Central Locking, Built-in Fog and Depth Lights BODY TYPE: TRACTOR UNIT

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Fgsdpfxjvripys Albeg