Used Pbr Pbr 500 for sale (15,916)

Year of construction: 2005, condition: used, Breton 5-axis milling machine, complete with camera, conveyor belts, and infeed roller table. Nsdpfx Agsz I D Atj Rswn

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Nodsz E Nh Nopfx Ag Rewn Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Nwodpez Iqyfofx Ag Rsn Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, tire size: 385/55-22,5, axle configuration: 6x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 610 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, loading space length: 65,000 mm, loading space width: 24,800 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam headlights - Low noise - Speed limiter - Cabin - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-sprung seats - Particulate filter - Radio/Multimedia system - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 6-121 VOLVO FH 500 LL 6x2 CONTAINER CHASSIS WITH PALFINGER PK 53002-SH LOADING CRANE Vehicle available in black and white! Currently under construction, therefore reference images. Loading crane: Palfinger PK 53002-SH with 8 extensions, at 20.5 m this crane can still lift 1580 kg! Njdpfxoz I Rvto Ag Rewn Endless swivel range Double knuckle system (overextending boom up to 15 degrees) Palfinger stability control Radio remote control with linear levers and display of pressure values HPLS system (Extra Power) Outriggers can be operated via radio LED work lights and more Vehicle description: Volvo FH 500, new model Low-profile container chassis 2 pairs of extendable container locking devices, extendable to 3 m for accepting 20-foot containers 4 warning signs with lighting, extendable to 3 m Chassis dimensions 6,500 mm x 2,480 mm Side walls + rear wall 600 mm high Front wall 1,900 mm high Lashing eyes at a distance of approximately 250 mm Forklift protection Globetrotter safety cab, FH Diesel engine 13 l, 510 hp / 375 kW, 2550 Nm Exhaust emissions compliant with Euro 6E, with SCR, particulate filter and exhaust gas recirculation I-Shift, automated 12-speed transmission I-Shift driving modes: Standard, Performance and Economy Volvo Engine Brake (VEB+) Wheelbase 5,600 mm Drive 6x2 Differential lock Suspension air/air Front axle tires 385/55R22.5, driving axle tires 315/70R22.5, trailing axle tires 385/55R22.5 Trailer coupling Rockinger 400 G 150 LED headlights Rain sensor (sensor-controlled windshield wipers) Daytime running lights LED, "V-light" LED taillights, brake lights with emergency braking flash sequence Auxiliary air conditioning Auxiliary heater Driver's seat comfort, air-sprung, heated, seatbelt integrated into seat Leather steering wheel Multimedia/infotainment system with navigation Cool box with freezer compartment 33 L under bed Roof hatch, electrically operated, tinted glass Close-range camera on the passenger side for blind spot monitoring Adaptive cruise control (ACC) with collision warning and emergency braking function Lane keeping assist and more Financing / hire purchase, as well as leasing / partial amortization leasing is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Condition: used, functionality: fully functional, mileage: 590,517 km, first registration: 04/2022, fuel type: diesel, fuel: diesel, brakes: retarder, color: white, gearing type: automatic, Equipment: air conditioning, airbag, central locking, cruise control, fridge, navigation system, parking air conditioner, parking heater, power assisted steering, retarder, seat heater, SCANIA 500 S - Registration: 04/2022 - Mileage: 590,517 km Nwsdez Hdgpspfx Ag Rsn - ADR compliant - Full air suspension - Retarder - Stationary air conditioning - Navigation system - Double fuel tank - Double bunk - Tires with 50% tread *Vehicle price excludes VAT. WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 BUSINESS HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer - Reefer Semi-trailer – Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition - Box body - Drop-side - Reefer cell - Insulated with reefer - Van Domenico Truck srl is not responsible for any discrepancies in technical specifications, options, and features, which may differ from the description in some cases. We invite you to verify the specifications of the specific vehicle.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Vemag 500 filling robot for sale. For more information or a video of the machine in operation, please contact me via email. Nedpfxez Eh Tds Ag Rswn

Condition: excellent (used), functionality: fully functional, maximum cutting width: 360 mm maximum cutting height: 135 mm motor power: 8.5 kW maximum blade diameter: 500 mm minimum blade diameter: 490 mm blade speed: 2800 rpm CE marking 400 V safety clutch feeder length: 660 cm receiver length: 530 cm machine length: 90 cm Nwedez E H Hcopfx Ag Ren year of manufacture: 2011

Condition: excellent (used), Year of construction: 2013, Column jib crane, overhead crane, workstation crane -Manufacturer: Abus, Column jib crane type LS -Documentation: Crane inspection log available -Base plate: 600 x 600 mm -Load capacity: 500 kg -Chain hoist: Abus type GM 2 500.4-2 -2x lifting speed: 4.0/1.0 m/min -Reach: 3000 mm -Total height: 4180 mm -Hook height: 3100 mm -Swivel range: 270° Nwedpfxez A R H Is Ag Rjn -Transport dimensions: 4180/800/H710 mm -Weight: 428 kg

Condition: used, mileage: 26,040 km, power: 368 kW (500.34 HP), first registration: 02/2022, fuel type: diesel, empty load weight: 17,400 kg, maximum load weight: 14,600 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 4,750 mm, next inspection (TÜV): 02/2027, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,500 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, differential lock, trailer coupling, Color: Ivory White, unladen weight: 17,400 kg, permissible total weight: 32,000 kg, cargo space (L W H): 6,500 mm x 2,450 mm x 600 mm, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, air suspension, retarder: Scania R 4100, digital tachograph, electronic braking system EBS, electronic stability program ESP, automatic climate control, adaptive cruise control ACC, premium seats, LED headlights: main headlights, headlight cleaning system, automatic driving lights, headlight range adjustment, Bluetooth hands-free system, lane keeping assist, adjustable steering column, fog lights, electrically adjustable and heated exterior mirrors, electrically adjustable curb mirrors, wide-angle mirrors, refrigerator, axle load indicator, work lights, hill start assist, LED daytime running lights, connector plug 1x15-pin, cornering lights, telematics system, folding passenger seat, SCR engine, Opticruise gearbox GRS 905 R, auxiliary drive EG 650 P, FULL air suspension, trailer coupling, light bar, PALFINGER PK 34002 SH front crane, platform L6500 W2450 H600, trailer coupling, YS2R8X40005631751, sold on consignment, non-binding offer, subject to errors and prior sale. Image may not correspond to the offer. Njdpfx Asz Eu T Rog Rown

Condition: excellent (used), TETRA PAK A3 FLEX 1000 B ASEPTIC FILLING MACHINE – 500 ML FORMAT Industrial aseptic filling machine, TETRA PAK A3 FLEX 1000 B, configured for the automatic packaging of liquid food products in 500 ml multilayer cardboard Tetra Brik Aseptic containers. The machine uses aseptic forming, filling, and sealing technology, integrating the sterilization of the packaging material, the formation of the brick, the dispensing of the product, and its hermetic sealing into a single machine. Tetra Pak A3 Flex technology is designed for the industrial packaging of previously sterilized products, allowing for the production of long-life beverages without the need for refrigeration before opening, provided that the required processing and sterility conditions are met. MAIN FEATURES - Manufacturer: TETRA PAK - Model: A3 FLEX - Version: 1000 B - Filling format: 500 ml - Type: Automatic aseptic brick filling machine - Packaging: Tetra Brik Aseptic - Automatic forming, filling, and sealing system - Continuous feed of packaging material via reel - Sterilization of packaging material - Formation of multilayer cardboard packaging - Filling of previously sterilized product - Longitudinal and transverse sealing system Njdpfx Aoz Rzideg Rswn - Automatic cutting and forming of packaging - Control of aseptic conditions during the process - Automatic transport and discharge of packaging - Tetra Pak electronic control panel - Operating parameter monitoring system - Upper platform for access and maintenance - Industrial construction with stainless steel components - Integrable into complete aseptic packaging lines OPERATING PROCESS The multilayer packaging material is fed into the TETRA PAK A3 FLEX from a reel and passes through the sterilization system before being formed. Subsequently, the material is transformed into a continuous tube through longitudinal sealing. The product, previously treated using a compatible UHT system, is introduced inside under aseptic conditions. The machine performs the transverse sealing, cutting, and forming of the individual packages, producing hermetically sealed bricks ready for the next production stages. The finished packages can be transferred to inspection, coding, capping, grouping, case packing, and palletizing systems. APPLICATIONS Particularly suitable for dairy industries, juice, nectar, plant-based beverage, and other long-life liquid product manufacturers. Depending on the installed configuration, it can be used for: - UHT milk - Flavored milk - Dairy smoothies - Fruit juices - Nectars - Plant-based beverages (soy, oat, or rice) - Nutritional beverages - Other liquid beverages compatible with aseptic packaging The TETRA PAK A3 FLEX 1000 B constitutes an industrial solution for automating the aseptic packaging of beverages, combining packaging formation, filling, and sealing in a single machine. The exact formats, production capacity, and compatibility with different products will depend on the installed configuration and tooling. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2015, condition: excellent (used), Exceptional Opportunity! From the former collection of the Max Planck Institute in Freiburg, we can offer you this highly efficient gene sequencing system, model "NextSeq 500," from the world-renowned brand "illumina." This system is one of the most powerful and widely used fully automatic gene sequencing systems, and it has become indispensable in virtually every laboratory worldwide. It is primarily used as a high-throughput system for the automated generation of DNA clone clusters through sequencing and primary analysis. Nodpfx Agez Rph Io Rswn Thanks to its particularly compact design, it is also perfectly suited for smaller laboratories and can be used ideally as a stand-alone device – all the necessary components are already integrated into the device, and complete operation can be performed via the built-in screen and a wireless keyboard. The device was acquired by the Max Planck Institute in 2016 and has been used very little. It has been continuously serviced by the manufacturer's customer service department and has only completed 395 runs – it is therefore in flawless condition both visually and technically – see the pictures. The device can be used immediately; however, for the sake of good order, we would like to point out that in a commercial operation, the legally required tests according to MTK/STK must be carried out again. Dimensions (H x W x D): approx. 585 x 534 x 635 mm Weight: approx. 85 kg The total weight of the system, including accessories and pallet, is approximately 110 kg! The device can be picked up from our premises during regular opening hours after prior telephone arrangement. For an additional charge, shipping can be arranged within three working days after payment receipt, insured via a shipping company. The sale is exclusively to commercial businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; a direct commercial sale to private individuals is expressly not permitted! The goods are sold excluding any warranty or liability for defects. The exclusion does not apply to claims for damages arising from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. If you have any questions regarding prices or technical details, please do not hesitate to contact us at the address provided.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Nwodpfez Et E Eox Ag Rsn Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: new, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Speed limiter - Air conditioning - PTO - Rear view camera EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP SCORPION SCO 25-59 Unladen weight: approx. 12,050 kg Payload: approx. 19,950 kg Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel configuration: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8 liter inline six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment: Engine & Drive Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic transmission Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine auxiliary drive SAE 1410 Transmission oil cooler Twin-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel configuration 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver's seat Co-driver's seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument cluster Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety Equipment Electronic stability program (ESC) ABS / EBS Hill start assist Nwsdpfx Asz D Utueg Ron Emergency braking assist (AEBS) Side collision assist Driver attention assist Adaptive cruise control SCORPION SCO 25-59 ROLL-OFF DUMP BODY Robust and powerful roll-off dump body for daily use in construction, waste disposal, recycling and container Your advantages • Ready for immediate use: concrete pumps, concrete mixers, dump trucks, roll-off dump bodies • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: German, English, Turkish • Jamila...

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, fuel: diesel, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Air-suspended seats - PTO (Power Take-Off) - Rear view camera - Sun visor EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. VOLVO FMX13 500 8x4 L13 EURO 6e EuromixMTP TMK 22m³ Rectangular dump body tipper Vehicle data Year of manufacture: 2026 New vehicle Volvo FMX 500 Wheel arrangement: 8x4 Permissible total weight: 32,000 kg Technical gross vehicle weight: 60,000 kg Wheelbase: 4,350 mm Engine: Volvo D13K 12.8-liter inline six-cylinder Power: 368 kW (500 hp) Torque: 2,500 Nm Emission standard: Euro VI Step E Volvo I-Shift 12-speed automatic transmission Leaf spring suspension front and rear Left-hand drive Day cab Cab color: Winter White Equipment - Engine & Drivetrain Volvo D13K Euro VI Step E engine Volvo I-Shift 12-speed automatic Volvo Engine Brake Plus (VEB+) I-See predictive cruise control I-Roll fuel-saving function Economy and Balanced driving programs Reinforced transmission for construction site use Engine PTO SAE 1410 Transmission oil cooler Two-cylinder air compressor (900 l/min) Roof air intake Heated fuel filter Chassis Wheel arrangement 8x4 Leaf spring suspension front and rear Front axles 2 × 8,000 kg Rear axle bogie 26,000 kg Planetary rear axles Nwsdpfxoz Erufo Ag Rjn Differential locks Active Grip Control Axle ratio 3.33 Dual power steering Wheels & Tires Steel rims Continental CrossTrac 315/80 R22.5 Tire pressure monitoring system Tire inflation hose 20-ton jack On-board tools Cab & Comfort Day cab Air-suspended comfort driver seat Passenger seat with adjustable backrest Air conditioning with sun sensor Digital 12-inch instrument panel Smart tachograph DTCO 4.1 DAB radio Four speakers Multi-function steering wheel Electrically adjustable and heated exterior mirrors Curb and front mirrors Roof hatch Central locking with remote control Tinted windows Additional cab insulation Safety Equipment Electronic Stability Program (ESP) ABS / EBS Hill start assist Emergency braking assist (AEBS) Side collision warning Driver alertness system Adaptive cruise control Rear view camera Reversing warning LED headlights LED daytime running lights Automatic headlights Additional Equipment Tipper equipment: EuromixMTP TMK 22m³ Rectangular dump body tipper Your benefits • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian • Henri Omeragic: German, Bosnian, Croatian, Serbian • Harun Cevik: ...

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMF 500 Linear Nedpfx Agsz Rl N Us Rjwn Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS Travel X-Axis: 5.000 mm Y-Axis: 920 mm Z-Axis: 820 mm Panning head: 1°, Hirth Spindle speeds: 20 - 10.000 rpm Tool: SK 50 Toolchanger Tool capacity: 80 Table size: 2 x 2.700 x 900 (max. 5.610) mm NC rotary table Equipment Caliper: Heidenhain TS 649 Oil mist separator Internal cooling: 40 bar Cooling tank: 980 l Chip conveyor Electronical handwheel separating plate

Condition: used, mileage: 444,500 km, power: 375 kW (509.86 HP), first registration: 04/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, VOLVO FH 500 – STAND-ALONE AIR CONDITIONING – TIPPING HYDRAULICS – ACC – STANDARD – EURO 6 – ENGINE BRAKE – 1ST OWNER – ----VEHICLE HISTORY * FROM 1ST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST * WORKSHOP MAINTAINED VEHICLE EQUIPMENT * EURO 6C * AUTOMATIC TRANSMISSION * ENGINE BRAKE * DISTANCE CONTROL (ACC) * LANE KEEPING ASSIST * ACTIVE BRAKE SYSTEM * STAND-ALONE AIR CONDITIONING * AUXILIARY HEATER * AIR CONDITIONING * ROOF-MOUNTED SEARCHLIGHTS * ONBOARD COMPUTER / NAVIGATION * XENON HEADLIGHTS * REFRIGERATOR * 1 X SLEEPER CABIN Nodpfx Agjzx Irpe Rswn * PTO / SINGLE-CIRCUIT TIPPING HYDRAULICS * FULL AIR SUSPENSION * 1 X TANK * ADBLUE * 1 X TANK * TOOLBOX * TIRE SIZE: 385 /65 R 22.5 * REAR: 315 / 70 R 22.5 * TÜV (TECHNICAL INSPECTION): 3 / 2027---- * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2000 EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER). 5 DAYS, 15 DAYS, 30 DAYS PLATES, AND 15 DAYS AUSTRIAN PLATES. EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to change, errors and prior sale! You can find more vehicles on our website. Sales are made exclusively according to our general terms and conditions – see our homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, mileage: 358,094 km, power: 368 kW (500.34 HP), first registration: 02/2020, fuel type: diesel, empty load weight: 16,300 kg, maximum load weight: 23,700 kg, overall weight: 40,000 kg, axle configuration: 10x4, fuel: diesel, gearing type: automatic, emission class: euro6, total width: 2,550 mm, number of cylinders: 6, displacement volume: 12,742 cm³, nominal power: 368 kW (500.34 HP), Equipment: ABS, Bluetooth, EBS, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power mirror, retarder, seat heater, Key Features Internal Reference: 26100M Chassis Number: YS2 P0X 400 Serial Number: 683.546.203 Vehicle Model: P 500 10x4 3-SK Trösch / Swiss-Vehicle Vehicle Brand: Scania Product Category: Tipper Truck Condition: Used Mileage: 358094 Emission Standard: Euro 6 Date of First Registration: 21.02.2020 Last Periodic Technical Inspection: 17.02.2025 Fuel Type: Diesel Engine Displacement (ccm): 12742 Engine Power: 500 Transmission Type: Fully Automatic Cylinders: 6 Trailing Axle: Steerable Suspension: Steel-Air Hydraulic System: Tipping Hydraulic System Retarder/Intarder: Yes Cab Vehicle Equipment: ABS, Bluetooth, CD Player, Differential Lock, EBS, Electric Windows, Electric Mirrors, ESP, Radio, Heated Seats, Cruise Control, Central Locking Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 10x4*6 NLA Axle 1: 315 / 80 R 22.5/11mm, Disc Brakes, Leaf Suspension Axle 2: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Suspension Axle 3: 315 / 80 R 22.5/9mm, Disc Brakes, Air Suspension Axle 4: 315 / 80 R 22.5/10mm, Disc Brakes, Air Suspension Axle 5: 385 / 65 R 22.5/11m, Disc Brakes, Air Suspension Number of Axles: 5 Weights & Dimensions Gross Vehicle Weight: 40000 Payload: 23700 Unladen Weight: 16300 Vehicle Width: 2550 Body Body Manufacturer: TRÖSCH Body Model: 3-Sided Tipper Body Year of Manufacture: 2020 Body Equipment: Cab Control, Auxiliary Drive Nsdpfoz Hrlmsx Ag Rown

Condition: new, Year of construction: 2024, Safety glass window for a Gildemeister CTX Beta 500 V4, item in original packaging, unused and new. Nwodpsyx U Slefx Ag Rjn

Condition: good (used), Year of construction: 2001, The machine will be delivered including a new replacement spindle. Digma HSC 500, year of manufacture 2001, Nwsdpfx Asy A H Tpjg Ron Heidenhain iTNC 530 control, travel X/Y/Z 500/400/350 mm, spindle speed up to 42,000 rpm, tool holder HSK 40, laser diameter measurement, oil mist lubrication system, extraction for graphite machining, 3D infrared measuring probe, The tool cannot be released from the spindle; according to the service technician, this is not a spindle problem but a hydraulic issue. A new HSC replacement spindle is included.

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: A selection of ABB robots and turntables. Available models listed below: ABB Robots ABB IRB6700-155 MH IRC5 ABB IRB6700-200 SW IRC5 ABB IRB6700-235 SW IRC5 Nsdpfx Aoz Sqhfjg Rown ABB IRC5M2004 ABB Turntables (Positioners) ABB IRBP B-750 ABB IRBP C-500 ABB IRBP K-300 L3150 D1200 ABB IRBPM2004K-300

Condition: used, Year of construction: 2013, functionality: fully functional, For sale is a used Knecht VS-500 case sealer, manufactured in 2013, with automatic size adjustment and tape closure. The machine was used in a packaging line for car rims. The cartons are fed through the machine via side conveyor belts. Pneumatically operated levers fold the top flaps; the cartons are then sealed with self-adhesive tape. According to the order documentation, an additional bottom sealing system with self-adhesive tape is also included in the ordered configuration. Equipment and technical data according to the order documentation: - Output: 8 cartons per minute - Carton length: 400–650 mm - Carton width: 400–650 mm - Carton height: 150–500 mm - Automatic size adjustment - Tape width: 50–75 mm - Tape overhang on the end faces: 70 mm - Side conveyor belts, 100 mm high - Control system: PLC S7-300, CPU 312-C - Operation: Touch panel TP 177 - Belt monitoring above and below for end-of-tape and tape breakage - Jam monitoring at the machine outlet and compressed air monitoring - Protective cover made of plastic glass and safety doors with safety switches - Machine dimensions according to the order: approx. 2,300 × 1,800 × 2,600 mm - Electrical connection: 400 V, 50 Hz; Power consumption: 1 kW - Compressed air: 6 bar; Consumption: 2 liters per carton Nodpfx Aez Suzijg Rown The system has been regularly maintained and, according to the current condition report, is in very good condition. It has already been disassembled and is being sold due to a business closure. An inspection at the location in 36381 Schlüchtern is possible by arrangement. The machine can be loaded onto a truck on-site. A video of the packaging line and detailed system documentation are available upon request. A Knecht AS-500 carton erector with two carton magazines is offered separately.

Condition: new, fuel type: diesel, motor manufacturer: Perkins 2506A-E15TAG1, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 3.661 kg Functional Generator capacity: 500 kVA Dimensions of cargo space: 380 x 113 x 222 cm CE mark: yes Other information Fuel consumption: 69.6 L/Hout at 75% Load Prime Generator: FG Wilson FG29A360 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 888 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames Nwsdpozyla Tefx Ag Ren

Condition: used, Weiss Type: SB2/500/80 Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Nedpfx Aozd Ultsg Rewn Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Year of construction: 2014, condition: repair required (used), functionality: not functional, machine/vehicle number: M755, Technical characteristics: # Workspace: 1,130 × 860 × 1,080 mm (W × H × D) # Tank capacity: 420L # Mechanical weight: 1,900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz # Generator output: From 3 kW up to >100 kW (with pulse technology) Dimensions # Machine dimensions (L×W×H): 2,100 × 2,000 × 2,600 mm Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) # Dosing unit for electrolyte # Control system: Siemens S7-300 with Visual WIN CC/User-friendly interface: Touch panel with integrated tool menu Nedpsxwmikjfx Ag Rjwn # Communication module for tooling requirements: up to 8 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: NOT WORKING # Safety Light barrier # Communication module Festo # Pump for filtration system

Condition: excellent (used), Year of construction: 2000, Engel ES 500/110 HL Clamping force: 110 tons Screw diameter: 35 mm Year of manufacture: 2000 Nwjdpsxvnhlsfx Ag Ren