Used Meyer Carrying Mandrel for sale (4,246)

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm coil weight: max. 4 t coil OD: max. 1.500 mm Iedpfx Akewzu E Dsxotf mandrel Ø: 508 mm year: 2012 (never used)

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm Itjdpfxjwzu Edj Akxsf coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used)

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room Itedpfsnh R Eksx Akxof - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, maximum load weight: 24,855 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 1,260 mm, Equipment: ABS, Kässbohrer K.SOK Extendable Truck/Car Transporter TECHNICAL DATA: * Overall length: 13,200 mm * Wheelbase: 8,350 mm * Overall width: 2,550 mm * Fifth wheel height: 1,000 mm * Axle load: 24,000 kg * Kingpin capacity: 12,000 kg * Unladen weight ±3%: 11,145 kg * Gross vehicle weight: 36,000 kg * Vehicle extension: 1,800 mm * Bumper extension: 1,200 mm CHASSIS: * BPW branded axles, 9,000 kg technical capacity with air suspension and drum brakes * Last axle self-steering Isdpfew Dw Adox Akxjtf * First axle liftable * Wabco braking system * Tyres: 12 x 205/65 R17.5 FRAME: * Made of high-strength steel * Front ramps: 2 pieces, 3,800 mm long, hydraulically foldable and sliding, galvanized ramps (max. 1,000 mm extension, angle between 2° and 15°), load capacity 7 t * Center ramps: 2 pieces, 1,200 mm long, hydraulically foldable, galvanized ramps (angle between 0° and 44°), load capacity 7 t * Front axle ramp: 1 piece, 4,000 mm long, hydraulically foldable, galvanized ramp (angle between 0° and 29°), load capacity 7 t * Loading ramps: For loading vehicles onto the truck transporter, 2 aluminum loading ramps sized 2000 x 400 x 75 mm (L x W x H) with a capacity of 3.5 tonnes are provided. The ramp incline is 10° with the rear bumper closed and 8° when extended. * Wheel recess: 800 x 460 x 70 mm * Vehicle extension type: 1,800 mm, each 300 mm LOAD SECURING: * Lashing eyes: 1 x 2 pcs with 8 tonnes load capacity at the gooseneck, 2 x 2 pcs with 8 tonnes capacity at the front ramp, and 2 x 2 pcs with 8 tonnes capacity at the rear section OTHER FEATURES: Chassis colour: Nova grey, galvanized For further information, please do not hesitate to contact us.

Condition: new, empty load weight: 9,500 kg, maximum load weight: 20,000 kg, overall weight: 29,500 kg, axle configuration: 2 axles, suspension: air, tire size: 245 75 R 17,5, Equipment: ABS, crane, KALEPAR KLP 228V6M2 - 6er Autotransporterauflieger Neu Model Zertifiziert nach VDI 2700 8.1 Erfüllt statisch mehr als die eigentlichen Anforderungen in Anlehnung an EN 12642 Code XL Anhang B und VDI 2700 8.1 und wird dynamisch für Pkw geprüft. ● Oberflächenbehandlung: Auf Kundenwunsch feuerverzinkt + ral seitlich ● Bremssystem: 2S-2M Wabco EBS-E ● Aufhängungssystem: Pneumatisches System ● Elektrische Anlage: 24 V Aspoeck ● Reifen: 8+1 Einheiten 245/70 R17.5 ● Achsen: 9-Tonnen-Achse SAF oder BPW ● Tore Gewicht: von 9000 kg bis 9500 kg ● Gesamtgewicht des Fahrzeugs: 29.500 kg (11.500 kg Sattelkupplung + 18.000 kg Achsen) ● 5. Radlänge: ca. 950 mm ● Aufliegerbreite: 2550 mm ● Aufliegerlänge: 13.600 mm ● Hydr. Heckausschub 1500mm länge ● Gesamtlänge des Aufliegers: 16.500 mm ● 1 Jahr Garantie ● VDI 2700 8.1 Zertifikat ● Hydraulik Seilwinde mit 5 ton Zugkraft und Funkfernbedienung Itedjvr Iunjpfx Akxjf ● COC-Dokumente (Europäische Homologation CE) Alle Angaben ohne Gewähr! Irrtum und Schreibfehler vorbehalten! Fotos dienen nur als Fallbeispiele.

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification Itedpfxenfvx Ne Akxjf OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, maximum load weight: 24,855 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 1,260 mm, Equipment: ABS, Kässbohrer K.SOK Extendable Truck/Car Transporter TECHNICAL DATA: * External length: 13,200 mm * Wheelbase: 8,350 mm * Overall width: 2,550 mm Iedpfx Ajw Nly Tekxjtf * Fifth-wheel height: 1,000 mm * Axle load: 24,000 kg * Kingpin load capacity: 12,000 kg * Unladen weight ±3%: 11,145 kg * Gross vehicle weight: 36,000 kg * Vehicle extension: 1,800 mm * Bumper extension: 1,200 mm CHASSIS: * Fitted with BPW brand axles, 9,000 kg technical capacity, equipped with air suspension and drum brakes * Last axle self-steering * First axle liftable * Wabco braking system * 12 x 205/65 R17.5 tyres FRAME: * Made of high-strength steel * Front ramps: 2 hydraulic, zinc-plated, folding and sliding ramps, 3,800 mm long (Max. extension angle 2° to 15°), load capacity 7 t each * Middle ramps: 2 hydraulic, zinc-plated, folding ramps, 1,200 mm long (angle 0° to 44°), load capacity 7 t each * Front axle ramp: 1 hydraulic, zinc-plated, folding ramp, 4,000 mm long (angle 0° to 29°), load capacity 7 t * Loading ramps: 2 aluminium loading ramps for loading vehicles onto the truck transporter, measuring 2000 x 400 x 75 mm (L x W x H), with a capacity of 3.5 tonnes each. The ramp angle is 10° with the rear bumper closed and 8° with the bumper extended * Wheel recess: 800 x 460 x 70 mm * Vehicle extension type: 1,800 mm every 300 mm LOAD SECURING: * Lashing rings: 1 pair (8-ton capacity) on gooseneck, 2 pairs (8-ton capacity each) on the front ramps, and 2 pairs (8-ton capacity each) at the rear section OTHER: Chassis color: red For further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg Itedendk N Aopfx Akxof OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: Itsdpfenfvy Uex Akxef This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. Itedpfxong Amko Akxof POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values Ijdpfx Akeng A R Sjxetf - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist Isdjnh R Suepfx Akxjtf via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: used, maximum load weight: 23,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, NXT Recovery 31 NEW VEHICLE COC to GSS via TNT 05.04.2024 ATTENTION! VEHICLE REQUIRES POWER ON PIN9 FOR THE CONTROL BLOCK Rotating beacon on the rear of the vehicle, E start & stop device, work lights on the rear of the vehicle, 4x side over-width panels and 4 damp room sockets, radio remote control hydraulic winch on the gooseneck 6700kg hot-dip galvanized, 3 air-sprung BPW axles, 3rd axle steerable, frame 2500mm hydraulically telescopic with locking every 500mm, rear overhang hydraulically lowerable, middle track hydraulically adjustable ATTENTION! VEHICLE REQUIRES POWER ON PIN9 FOR THE CONTROL BLOCK Itodpfovm Indsx Akxsf

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 21,000 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 07/1995, loading space length: 13,700 mm, loading space width: 2,500 mm, suspension: air, tire size: 285.70 r 19.5, color: black, Year of construction: 1995, Equipment: ABS, tail-lift, sem racing set-up zorzi gooseneck, 2-axle pneumatic chassis, insulated load-bearing set-up with 10 q.li dhollandia racing rear side, double-level side storage, rounded head, internal part with workshop and 2-vehicle shelter with upper floor and aisles, living area with beds and sofas and bathroom on the neck, complete side awning included + removable mirrored walls, side access door with stairs and rear door, INTERDRIVE SRL-PARMA DEALER Ijdsv T Ugaepfx Akxotf

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Ijdpfx Aexcxupekxotf

Condition: used, empty load weight: 11,300 kg, maximum load weight: 29,700 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2006, suspension: air, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Special low loader for transporting commercial vehicles and construction machinery * Manufactured by the premium manufacturer Estepe from the Netherlands (Estepe type E0PL 24-41) * Years of experience in building such special low loaders for transporting trucks and construction machinery have meant that every detail has been taken into account * Of course with extendable low bed, hydraulic ramps and hydraulic platform * Special winch with remote control, etc. * BPW axles * 3rd axle - lift axle * Air suspension with lifting/lowering * Central lubrication * GVW: 41,000 kg. * Empty weight: 11,300 kg * Payload: 29,700 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Itodpfortbb Sjx Akxjf Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop Iodpfxong Ax Se Akxjtf - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, empty load weight: 11,000 kg, maximum load weight: 25,100 kg, overall weight: 36,100 kg, axle configuration: 3 axles, suspension: air, tire size: 215 75 17,5, KLP 334V3 Truck Transporter Iodpfx Aokqmuijkxstf 3x SAF axles (1st axle lifting axle, 2nd fixed axle, 3rd self steering axle) Total weight: 35,500 kg Payload: 10,500 kg Empty weight: 30,000 kg Total length: 13,600mm + 1700mm Hydraulic extension rear length: 1100mm Extension in the middle up to 1700mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 245/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. 5th wheel height: approx. 950mm - 1150mm (other saddle heights also possible) 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements. Paint can be freely selected / free of charge. Netto export possible.

Condition: used, axle configuration: 3 axles, first registration: 07/2008, loading space length: 9,700 mm, loading space width: 2,300 mm, loading space height: 2,500 mm, total length: 10,800 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 8,270 kg, Gross weight: 35,500 kg, Kingpin size: 2 inch, Suspension type: air suspension, ABS, EBS, Body year: 2008, Number of sides: 1 side, Axle type: SAF = Further Information = General Information Cab: Day cab Registration: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Left tyre tread: 15 mm; Right tyre tread: 8 mm Axle 2: Left tyre tread: 11 mm; Right tyre tread: 14 mm Axle 3: Left tyre tread: 3 mm; Right tyre tread: 18 mm Weights Empty weight: 8,270 kg Payload: 27,230 kg Gross vehicle weight: 35,500 kg Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, years, and price classes. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing selection • Recognised quality • Fair pricing • Honest business practices • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The assurance of "recognised quality" • And more.... Visit our website for special offers and complete stock: Leasing through Kleyn Trucks is possible in most European countries! Ijdpeyrmymefx Akxotf Quickly calculate your lease instalment and submit an inquiry through our website. Ask directly about our European warranty packages.

Condition: used, empty load weight: 19,890 kg, maximum load weight: 10,110 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 10/2008, next inspection (TÜV): 08/2026, suspension: air, tire size: 295/60R22.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, parking heater, Vehicle location: Bovenden, air conditioning, auxiliary heating, alloy wheels, 2 axles, air suspension, last axle steering, lift/lower function, ABS (anti-lock braking system), interior lighting, right-hand side door, left-hand side door, twin tires. Isdpfx Aeyq S Akjkxjtf Body: 2-axle box semi-trailer with slide-outs on both the left and right. Total internal length: 10,180 mm; separated into 7,260 mm rear and 2,920 mm front sections. Width: 4,490 mm, height: 2,115 mm. The trailer was previously used as a training room by the Occupational Safety Association for Electrical Engineering. Power generator included, with 189 (unit not specified), for self-sufficient operation/living. Equipped with 2 x auxiliary heaters, projector, approx. 4,550 mm external width, total length 12,760 mm. Original new price approx. €970,000. A major summer service was carried out in 09/2025 (filters, air conditioning, underbody, etc.) for approx. €18,500. Matching MAN tractor unit -89270- available at extra cost! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, tank capacity: 20,000 l, GENERAL Equipment: Venting/inlet, spray head, crane lugs Design: upright Remarks: 1 tank with a small dent in the cylinder; manhole approx. 340 x 440 mm Internal diameter: 2,500 mm Total height: 6,750 mm Max. overpressure: 0.50 bar Agitator: agitator flange Support design: height-adjustable feet Location: Bremen Nameplate: Volume: 20,000 litres Product-contact material: V2A 1.4301 (AISI304) Isdpsxqc Uisfx Akxotf Condition: used Cylindrical height: 3,700 mm Last application: fruit juice industry TANK Specific gravity of medium: 1.37 (t/m³) Number of feet: 3 pcs EQUIPMENT Manhole / dome: in cylinder Outlet: pipe end approx. Ø 80mm Note: outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator arrangement: side-mounted on cylinder

Condition: ready for operation (used), Year of construction: 1998, A manual screen printing machine Eickmeyer is available. Material thickness range: 2mm-25mm, max. printing dimensions X/Y: 1700mm/700mm, machine dimensions X/Y/Z: approx. 2650mm/2100mm/1500mm. An on-site inspection is possible. Itjdpfx Akjyxq Txexsf

Condition: used, For inquiries regarding the attachment, Mr. Herden (Tel. ...) will be happy to assist you. Folding bucket / 4-in-1 bucket / Zettelmeyer mount / Volvo CAT JCB / 2,300 mm cutting width / new unit / in stock & immediately available / suitable for JCB 409 Price: €1,990.00 net / €2,368.10 gross - Cutting width (mm): 2,300 Equipment: - Includes Zettelmeyer mount, compatible with JCB 409 / CAT / Volvo We have a large selection of various attachments in stock and available for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. On request, we will gladly prepare a financing offer for you. We are an authorized sales and service partner for Westtech. We are an authorized sales and service partner for Gierking GMT. We are an authorized sales and service partner for OilQuick. We are an authorized sales and service partner for Weber MT. We are an authorized sales and service partner for Holp. We are an authorized sales and service partner for DMS. We are an authorized sales and service partner for Seppi M. We are an authorized sales and service partner for Magni telescopic handlers. We are an authorized sales and service partner for JCB construction equipment. We are an authorized sales and service partner for Mercedes-Benz. We are an authorized sales and service partner for Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. Itodpjyxadtsfx Akxjf Errors and prior sale excepted! Internal number: 010811 = More information = Purpose: Construction Contact Marius Herden for further details.

Condition: used, functionality: fully functional, total length: 4,350 mm, clamping force: 500 kN, Tool Carrier / Technology Carrier Zettelmeyer W26/20 Currently dismantled and divided into two parts. Iedpfxjywtyfs Akxstf The carrier was completely overhauled by DEGUMA-SCHÜTZ GmbH and sold to us. DEGUMA-SCHÜTZ GmbH has taken over all documents of the company Zettelmeyer and can also supply spare parts and carry out repairs. Please refer to the product images and the attached descriptive document for exact dimensions/information.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 0312101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 400 V, input current: 70 A, grinding belt width: 550 mm, overall weight: 3,000 kg, year of last overhaul: 2022, Used machine, very well maintained, was used for sanding veneers. Several dozen sanding belts with different grit sizes are included. Iedsywfnhjpfx Akxetf