Used Meyer Carrying Mandrel for sale (4,485)

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1731 067, Equipment: CE marking, onboard computer, For sale is a tape gluing machine from Herbert Meyer GmbH. Working width: 1800 mm, can operate in continuous mode. The machine is from 2013 and is in good technical condition – ready for operation. I can provide more information via email. Power: 32.2 kW Supply voltage: 400 V Supply current: 47.5 A Air supply: 6 bar Fusing machine with a particularly efficient heating zone and precise pressure of the pressure rollers for even pressure. Energy savings and clean operation guaranteed. Lasdpfx Abjzfi Hbjzog

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Lodedzqmhopfx Abzoag Disc spacing 1470 mm Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Good condition

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland Laedpfx Abett Sy Rszog was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, functionality: fully functional, load capacity: 2,500 kg, fork length: 2,400 mm, empty load weight: 117 kg, Fork positioner Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Lajdpeu Ha Srefx Abzog Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles.

Condition: excellent (used), Year of construction: 1997, Permissible total weight: 750 kg Unladen weight: 140 kg Payload: 610 kg 1 axle, tire size: 13" Ljdpfxsd Eckxe Abzsag Internal dimensions of the box: 2010 x 1255 x 330/430 mm Overall length: 3250 mm Overall width: 1700 mm Overall height: 920 mm

Condition: reconditioned (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25/699, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, Equipment: emergency stop, A virtually as-new, original Meyer Burger TS23 cut-off machine with the special hydraulic "Zürbeli table" and the large 27-1/6" clamping system is being offered. Additionally, our current DS1 displacement measuring device with HMI is installed. The machine is in truly impeccable condition, fresh from the workshop, having received a complete inspection, maintenance, testing, and service. The machine is complete, with original documentation available. The photos are taken by us and are up to date. For further information or to arrange details, please contact us. The machine is available directly from our stock. Prior sale reserved at all times. Ljdexy Ra Sopfx Abzoag TIP: We continuously stock further Meyer Burger machines and spare parts – please also visit our website! Feel free to contact us, we will be happy to advise you!

Condition: good (used), MEYER tine adjustment with load holding clamp Lasdpfx Ajwn Ic Njbzsg Condition: used Size: FEM 2

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 4/33, Offered for sale is a Meyer Burger separating saw, model TS121, in used, original, and immediately ready-to-use condition. The machine has been workshop-tested and serviced; maintenance and wear parts have also been recently replaced. The rotary table has been replaced by us once and operates absolutely flawlessly and precisely. It is integrated into the original control system (like the original rotary table). The control system is a Sinumerik 810M with electronic handwheel. Additional services can be discussed and ordered as options, including a complete retrofit with CE certification and more. The machine is available from stock and ready for demonstration. The machine is complete, and the original documentation is available. The pictures shown are ours and up to date. For further information or to coordinate details, please contact us briefly. The machine is available from our stock. Lodpfxsxy Ny De Abzoag Interim sale is always reserved. TIP: We constantly have further Meyer Burger machines and spare parts in stock – feel free to visit our homepage! Contact us, we are happy to advise you!

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 3,600 kg, fork length: 2,400 mm, empty load weight: 452 kg, construction width: 1,150 mm, opening width: 1,100 mm, Fork positioner Ljdpfx Aboyl A Rbezjag ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: If you have any further questions, please feel free to call us. In addition to this model, we also have around 150 other industrial trucks in stock. Feel free to browse further on our website fleischmann-foerdertechnik. We are happy to arrange leasing & financing as well as delivery on favourable terms for you. We also accept trade-ins of Linde equipment – even if you do not purchase a machine from us. Indicated operating hours were read at the time of listing. Subject to prior sale, changes, and errors.

Condition: used, machine/vehicle number: H2X388V00602, Year of construction: 2019, operating hours: 15,156 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,700 mm Load capacity: 4,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 2,560 mm Weight: 8,000 kg Battery date: 02/11/2022 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 81.1 V Service valid until: 08/2027 UVV (Occupational Safety) valid until: 08/2027 Lasdpszz Hm Rsfx Abzsg Operating hours: 15,156 h EQUIPMENT 3rd and 4th hydraulic valve Hydraulic fork positioner with side shifter Integrated scale Tilt angle indicator Windshield with wiper Roof pane Lateral fall protection White, non-marking tires LED work light (front) LED work light (rear) Road traffic lighting with turn signals Safety light (front) Safety light (rear) Comfort seat with lumbar support and seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 43

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Lajdpfjtrd T Tsx Abzsg Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: excellent (used), mobile unit engine power: 5.5 kW number of filters: 32 filtration area: 16 m2 extraction capacity: 6500 m3/h year of manufacture: 2018 weight: 260 kg Lajdpfx Ajz D Ay Ajbzeg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 3 - D Bending with fully automatic process controlled by NC Maximum pipe diameter: 50 mm Includes 3 bending dies: 26.9 mm, 33.7 mm, 42.4 mm Used very little, therefore in very good condition. Lajdjz Dntuopfx Abzsg

Condition: good (used), functionality: fully functional, machine/vehicle number: NR9VEGA26AR257231, empty load weight: 9,800 kg, maximum load weight: 28,200 kg, overall weight: 38,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/2025, next inspection (TÜV): 02/2027, loading space length: 13,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17.5, tire condition: 70 %, maximum speed: 90 km/h, color: grey, trailer brake: trailer braked, Year of construction: 2024, Equipment: ABS, our vehicle number: #30806 VEGATRAILER 2D Jeep Carrier Car transporter for up to 6 vehicles A2 steering axle with friction joint Lsdpfxeyw Ix No Abzsag Hammer Winch cable winch 2x drive-on ramps Air suspension ABS EBS BPW axles Drum brakes Twin tyres 245/70 R 17.5 3x storage/toolbox 2x central supports Water tank 2x LED reverse lights Leasing/financing available upon request!

Condition: used, empty load weight: 8,900 kg, maximum load weight: 19,080 kg, overall weight: 27,980 kg, first registration: 11/2024, loading space length: 13,650 mm, loading space width: 2,550 mm, Year of construction: 2024, gearing type: other, driver cabin: other, * German vehicle * 1st owner * Condition: see photos * 3 loading platforms * 3 double-decker levels * Electric winch Ledpfez A Tv Ssx Abzeag * Type: Hammer Winch * Pulling capacity: 4,500 kg * Capacity: 6 passenger cars * Vans, transporters * BPW axles * Air suspension * Disc brakes * Hydraulic outriggers * Platform dimensions: Front platform, top: 5.20 m, bottom: 5.40 m * Middle platform, top: 5.10 m, bottom: 5.60 m * Rear platform, top: 2.90 m + 1.20 m outrigger * Lower platform: 2.70 m + 1.70 m outrigger * Dual tires * Spare wheel holder + spare wheel * Cable winch with pulley * Trailer length (loading extension retracted): 13,650 mm * Trailer length (loading extension extended): 15,100 mm * 2 x steel loading ramps * Storage compartment * Wabco EBS * Water tank * Work lights * GVWR 27,980 kg * Unladen weight 8,900 kg * Payload 19,080 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the possibility of inspecting and examining the goods, so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after arranging an appointment. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Lasdpfxsyfmwxo Abzeg Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: used, functionality: unexamined, Ferwood Code: RU0011652 - Manufacturer Code: K6343K0944 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Lajdpfx Abewtzcyjzjg

Condition: used, functionality: unexamined, Ferwood code: RU0011649 - Manufacturer code: K6343K0946 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Laedjwtnnpspfx Abzjg

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Lsdpewnrt Sjfx Abzoag Additional bending mandrels, but without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. Lasdpfxozz Hmqj Abzog 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Blow-off station: Integrated for cleaning

Condition: ready for operation (used), Year of construction: 1969, Pressing force: 3 t Mandrel diameter: 80 mm Lodpfezh Ibpex Abzoag Bore: 15 mm Stroke: approx. 550 mm Overhang: 250 mm Table size: 300 x 370 mm Cutout in the table: 85 mm Footprint: 1000 x 800 x 2000 mm Weight: 260 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: 20210330-2, control type: CNC control, pipe diameter (max.): 63 mm, pipe length (max.): 2,600 mm, bending angle (max.): 190 °, bending radius (max.): 350 mm, bending radius (min.): 25 mm, overall weight: 3,000 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 1,350 mm, CNC 63CNC AUTOMATIC MANDREL BENDING MACHINE – FOR TUBES AND PROFILES For sale: CNC 63CNC automatic mandrel bending machine, designed for precise bending of tubes and profiles. The machine is equipped with CNC/PLC control with a touchscreen and the ability to save bending programs. TECHNICAL DATA: -Maximum diameter / material dimension: Ø63 × 4 mm -Bending radius: 25–350 mm -Bending angle range: 0–190° -Effective length on the mandrel: 2600 mm -Motor power: 7.5 kW -Maximum pressure: 160 kg/cm² -Machine dimensions: 5000 × 1200 × 1350 mm -Weight: approx. 3000 kg EQUIPMENT AND FUNCTIONS: -PLC control with touchscreen -Automatic and manual mode -Diagnostic system -Full hydraulic clamping -Up to 100 programs, each with up to 20 bending operations -Independently programmable speeds of axes Y, B, and C -Programmable material springback compensation -Automatic release of the tube before final bending -Cycle start via foot pedal -Air cooling The machine enables repeatable, precise bending and is designed for production applications where efficiency and process repeatability are essential. Laedpfozy Rgxjx Abzjg Transportation is the buyer's responsibility.

Condition: good (used), Manufacturer: Optimum Type / Model: DDP 50 Pressing force: 1.5 t Table: mm ram: 50 x 50 x 647 mm Projection: 226 mm Lever length: 850 mm Lajdpfx Aberdgrkjzjg Plunger stroke: max. workpiece height: 459 mm Accessories/equipment: Condition: good Weight: 167 kg Dimensions: 650 x 370 x 785 mm

Condition: used, overall weight: 28,000 kg, axle configuration: 2 axles, first registration: 03/2022, loading space length: 13,400 mm, loading space width: 2,450 mm, loading space height: 3,000 mm, Equipment: ABS, Rolfo S2, enclosed car transporter, tilting roof, lift platform, double-deck, accident-free. Internal number for inquiries: 0826767 General condition: Roof damaged Manufacturer: Rolfo Type: S2 Registration date: 03/2022 Permissible total weight: 28,000 kg Unladen weight: 14,300 kg ABS EBS Loading platform, hydraulic lift Double-deck Hydraulically adjustable ramp length Tilting roof 2 axles, air suspension Work lights Load compartment length: 13,400 mm Load compartment width: 2,450 mm Load compartment height: 3,000 mm Tires: 1st axle: 245 / 70 R17.5, air suspension / 30% 2nd axle: 245 / 70 R17.5, air suspension / 30% ----Price: 99,900 EUR + 19% VAT For further questions, you can reach us at the following telephone numbers: * We speak: German, English, French, Polish, and...? Ledpezxvdyjfx Abzeag Typographical errors, errors and prior sale are subject to change.

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed Lajdpfx Astr U Hlebzjg → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg