Used Ital Form Bread Maker And Rolling Pin Maker for sale (21,735)

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Nwsdsy Azgwepfx Afasf Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, working width: 1,450 mm, mount diameter: 800 mm, number of feed rollers: 2, section length (max.): 1,560 mm, The machine is equipped with 2 unwinding stations, allowing you to process double the quantity of cut lengths simultaneously. The machine speed is 50 m per minute. In the longitudinal direction, 3 knives can be set, enabling the width to be halved and a trim to be cut off on each side. The unwinding station is equipped with 3-inch and 6-inch pneumatic expanding shafts. We have successfully processed BO PET films with thicknesses ranging from 36 to 250 microns. The machine is fully connected, can be inspected daily, and, by arrangement, customer material can also be tested. We would disassemble and load the machine, either onto a truck or into a container. Nwsdpoy D Edcofx Afaof

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Njdpfx Aeh U Rzgofaewf CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Neue Farbwalzen / New Ink Form Roller Böttcher for KBA RA 106Neue Farbwalzen / New Ink Form Roller Hersteller / Manufacturer BöttcherBöttcher KBA RA 106 Roller 0905482 A 1701 Böttcher KBA RA 106 Roller 0905481 B 1603 Nwedpfx Aoranvrsfaef Böttcher KBA RA 106 Roller 0905481 B 1601 Böttcher KBA RA 106 Roller 0905481 B 1605 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Neue Farbwalzen / New Ink Form Roller Böttcher for KBA RA 105Neue Farbwalzen / New Ink Form Roller Hersteller / Manufacturer BöttcherBöttcher KBA RA 105 Roller 0905480 B 1902 Nsdpfjl I Aazsx Afaewf Böttcher KBA RA 105 Roller 0905495 B 1903 Böttcher KBA RA 105 Roller 0905473 B 1703 Böttcher KBA RA 105 Roller 0905472 B 1702 Böttcher KBA RA 105 Roller 0905476 B 1511 Böttcher KBA RA 105 Roller 0905476 B 1601 Böttcher KBA RA 105 Roller 0905476 B 1606 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905470 B 1702 Böttcher KBA RA 105 Roller 0905474 B 1604 Böttcher KBA RA 105 Roller 0905470 B 1605 Böttcher KBA RA 105 Roller 0905471 B 1605 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905473 B 1606 Böttcher KBA RA 105 Roller 0905495 B 1605 Böttcher KBA RA 105 Roller 0905480 B 1605 Böttcher KBA RA 105 Roller 0905472 B 1605 Böttcher KBA RA 105 Roller 0905471 B 1702 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1985, Offer 25425 Technical Data Nwsdpfx Aex T Urhjfaef - Motor-driven top roll: 175 x 30 mm - Bottom rolls free-running: 250 x 50 mm - Top roll adjustable via handwheel - Top roll diameter: 175 mm - Bottom roll diameter (each): 250 mm - Throat depth: 1100 mm - Distance from base plate to bottom roll: 1520 mm - Drive: 400 V - Required space approx. W 900 x H 2650 x D 2000 mm - Weight approx. 1500 kg

Year of construction: 1983, condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length Nwodpfx Afobidg Eeajf

Year of construction: 1980, condition: used, strip width 120 - 300 mm strip thickness 1 - 5 mm Nwedpfjlil Epjx Afasf reference material (tensile strength) 800 N/mm²

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm No. of pinch rolls: 2 Nwsdpfx Afegryl Aeajf

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm Nwedpegm E Rdefx Afajf strip thickness: 0,4 – 4 mm No. of pinch rolls: 2

Year of construction: 1999, condition: good (used), pinch roll unit/felt brake/crop shear for slitting line strip width: 500 - 1.650 mm strip thickness: 0,4 – 4 mm Nwjdogm E Rlepfx Afasf No. of pinch rolls: 2

Year of construction: 1980, condition: used, strip width 120 - 300 mm Nsdpfx Asbidc Usfajwf strip thickness 1 - 5 mm reference material (tensile strength) 800 N/mm²

Condition: used, strip width: 100 mm Nwjdpexc Hr Aofx Afasf strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 control as new

Condition: new, Year of construction: 2007, functionality: fully functional, warranty duration: 12 months, total width: 1,180 mm, total length: 1,180 mm, total height: 1,604 mm, input frequency: 50 Hz, input current: 1 A, empty load weight: 375 kg, electrical fuse: 3 A, input voltage: 380 V, CR 59 bread rounder short track 3.5 meter rounding length weight range 200-2200 gr Nodpfswm Rghjx Afaewf

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm speed: ca. 14 m/min No. of levelling rolls: 7 Nwsdjxc Htmopfx Afaof No. of pinch rolls: 2 control as new

Condition: used, strip width: 100 mm strip thickness: 0,4 - 3 mm Nwodpfx Afjxc Ht Toaef speed: ca. 14 m/min No. of levelling rolls: 7 No. of pinch rolls: 2 control as new

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm Nodpfexc Hytsx Afajwf speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995

Condition: excellent (used), Year of construction: 1980, strip width: max. 1.750 mm strip thickness: 0,5 – 3 mm speed: max. 160 m/min No. of pinch rolls: 2 Njdpfx Ajxaz Sfjfajwf

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 No. of pinch rolls: 2 revised 1995 Nedpjxc Hygsfx Afaewf

Condition: used, strip width: max. 450 mm strip thickness: max. 12 mm speed: max. 20 m/min No. of levelling rolls: 3 Nwedpfexc Hyysx Afasf No. of pinch rolls: 2 revised 1995

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m Nwedpfxeyf Un So Afajf 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air. Nwsdpfxeywdtve Afaef

Condition: excellent (used), Year of construction: 2020, Complete forming to freezing line Excellent condition Upgrade your food production with our comprehensive burger, nuggets, and patties production line! From forming to IQF freezing, this line covers all stages with top-tier equipment from ALCO, JBT, and Schomaker. Watch to see our complete production line in action: Forming Machine: ALCO / JBT AFM 400 PC Breader: ALCO / JBT APN 400 Nwjdpjtykvhefx Afajf Battering Machine: ALCO / JBT ASC 400 Meatballs Machine: Schomaker-tec BRU 600-488 Shuttle Conveyor: Schomaker (400 to 600 mm transfer) Fryer: Schomaker Oil Management System: Schomaker Linear Oven: Schomaker Shuttle Conveyor: Schomaker (600 mm to 400 mm transfer) Spiral Freezer IQF: ALCO / JBT (without cooling equipment) Key Features: High efficiency and precision Comprehensive solution from forming to freezing Advanced technology ensuring product quality Contact us for more information and inquiries:

Condition: ready for operation (used), Italdibipack Semi-Automatic Shrink Wrapping Machine + Shrink Tunnel Complete shrink packaging line – ready for immediate use! High-quality Italian Italdibipack shrink wrapping line consisting of a semi-automatic shrink wrapping machine and a separate heat shrink tunnel. Nodsywn Nbepfx Afajwf This reliable packaging system is ideal for packaging products such as boxes, printed materials, food products, cosmetics, hardware, and many other retail or industrial items. The machines are currently mounted on euro pallets and ready for immediate pickup. Main features: • Manufacturer: Italdibipack (Italy) • Semi-automatic shrink wrapping machine • Separate heat shrink tunnel • Complete packaging line • Reliable industrial construction • Easy to operate control panels • Suitable for many product types • Immediate availability Technical details: Shrink tunnel: • Tunnel opening height: 150 mm • Conveyor width: 330 mm • Conveyor type: rotating belt • Power supply: 3-phase Wrapping machine: • Semi-automatic operation • Power supply: single phase Condition: The machines are in good used condition and were previously used in production. They are being sold due to closure of the previous operating location. Both units are already placed on euro pallets, making loading and transport easy. Delivery:• Immediate pickup available • Machines are ready for transport • Located in Finland Perfect for: • Contract packaging companies • Food producers • Printing houses • E-commerce packaging • Small and medium manufacturing Contact: Please contact for additional information, pictures or transport arrangements. Machine can be demonstrated powered on before loading. Price negotiable for quick deal. Keywords: Italdibipack, shrink wrapping machine, shrink tunnel, shrink wrapper, heat shrink tunnel, L sealer, semi automatic shrink wrapper, packaging machine, Smipack shrink wrapper - used shrink wrapping machine for sale - Italdibipack shrink wrapper - shrink tunnel packaging machine - Smipack - Minipack Torre.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 45802, Handtmann RF 440 round former with vacuum filler for the automatic production of dumplings and balls with homemade quality. Year of construction 2021 very little used condition like new! Nedpfx Afoyk U Ezeaowf