Used Hydraulic Air Membrane Press for sale (45,604)

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Pgjdpfxow R Aamj Af Set Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Year of construction: 2026, condition: new, machine/vehicle number: 128, Work area: 3500 x 1500 mm (Frame inner dimensions approx. 3400 x 1400 mm) Folding table with 12 mm tabletop for space-saving setup Becker vacuum pump with 1.25 kW, 400 V, 50 Hz motor Vacuum pump flow rate: 40 m³/h Tank capacity: 100 l Natural rubber membrane with 700% elongation Max. component height: approx. 600 mm External dimensions: approx. 3600 x 1850 x 1000 mm Pgsdpfxed Rzl Uo Af Sot Incl. chassis with 4 swivel casters Weight: approx. 440 kg Ex works, excluding transport, from Seevetal warehouse.

Condition: used, TECHNICAL DETAILS Psdpfxsuhakuj Af Segt - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 1315 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: used, SCHOEN 250t TYPE 6400 PRESSURE: 250t STROKE: 420mm Pjdpfxjq A H H He Af Ssgt TABLE DIMENSIONS: 2050x1730mm HIGH ACCURACY HYDRAULIC PRESS

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm Psdpfx Afjtqqq Rs Sogt ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Condition: good (used), Year of construction: 1983, Offer 26245 Technical data: - max. pressing force 100 t - max. ram stroke approx. 500 mm - stroke speed 25 mm/s - return speed 125 mm/min - installation height approx. 800 mm - overhang to the center of the ram 380 mm - ram clamping surface 530 x 400 mm - ram clamping pin 40 mm - table size 750 x 560 mm - table bore / through hole in the table 200 mm Pjdsz A Az Rspfx Af Ssgt - table height above floor 720 mm - oil filling volume approx. 200 l - drive 400 V / 11 kW - space requirement approx. W 1150 x H 2980 x D 1850 mm - weight approx. 4600 kg

Condition: used, große Hydraulische Presse - big Hydraulic Press Lechner ST USTIA Baujahr / Year 1980 - Serial-No. 1438 1 Pressplatte / 1 pressure plate Size with max. 800 x 800mm Stapelhöhe / Stack height max. 800mm Druck stufenlos regelbar / Pressure steppless Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Pgsdpfx Aswgd S Def Sst

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Pjdszvfqkopfx Af Ssgt Clamping table changed! Not an original table!

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 4,300 mm, total width: 2,300 mm, total height: 2,960 mm, overall weight: 10,600 kg, feed length X-axis: 600 mm, feed length Y-axis: 270 mm, spindle motor power: 22,000 W, product height (max.): 370 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 220×3200 | 220 T | MTP-3212 | 4 AXES X,Y,R+V The brand-new MTP 220×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system, heavy-duty welded construction, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms Podezg Evhepfx Af Ssgt • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications • Pressing force: 220 T • Maximum bending length: 3100 mm • Distance between columns: 2550 mm • Throat depth: 450 mm • Ram stroke: 270 mm • Maximum opening height: 370 mm • Table height: 920 mm • Controlled axes: X, Y, R + V • Main motor power: 22 kW • Hydraulic oil tank capacity: 200 L • Machine dimensions (L × W × H): 4300 × 2300 × 2960 mm • Machine weight: 10,600 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate operation.

Condition: used, Year of construction: 1966, Technical details: pressure: 16 t Pgedpfx Afjz Dgczj Set distance between columns: 450 mm stroke: 350 mm total power requirement: 3 kW dimensions of the machine ca.: 1,2 x 0,8 x 2,5 m

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm Pgedpfszn H Rvjx Af Sjt - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Condition: used, Year of construction: 1972, Press force: 150 t Stroke: 180 mm Pgsdpszymlqsfx Af Sot Frame width: 300 mm Side frame opening: 180 mm Shut height (stroke up): 300 mm Table area: 570 x 410 mm Table height above floor: 875 mm Ram area: 180 mm Downstroke speed: 250 mm/s Upstroke speed: 160 mm/s

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Pgjdpfx Afeyxgr Ro Set

Condition: used, Technical details: pressure: 0,9 t daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t Pgsdsu Nfw Sjpfx Af Sjt dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation *

Condition: used, Year of construction: 1978, Press force: 500 t Stroke: 600 mm Frame width: 1550 mm Side frame opening: 1250 mm Shut height (stroke up): 900 mm Table area: 1200 x 1300 mm Podpfx Afozyl Drs Segt Cushion force in table: 250 t Cushion stroke in table: 150 mm Cushion area in table: 950 x 950 mm Table height above floor: 1245 mm

Condition: used, Available quantity: 4 units Manufacturer: MÜLLER Type: ZE 800-35.1.1 Year of manufacture: 1969 General overhaul: 2008 Pressing force: 8,000 kN Pulling force, press ram: 8,000 kN Ram stroke: 1,100 mm Ram surface area: 3,500 × 2,200 mm Max. dimension at the hydraulic clamps: 2,040 mm Hydraulic table cushion, one-piece: Displacement force: 250 – 2,500 kN Stroke: 85 – 300 mm Cushion surface area: 2,700 × 1,500 mm Hydraulic ram cushion, unregulated: Displacement force: 100 – 1,000 kN Stroke: 150 mm Cushion surface area: 2,400 × 1,500 mm Distance, table – ram TDC: 2,200 mm Distance, table – ram BDC: 1,100 mm Table clamping surface: 3,500 × 2,200 mm Clearance between guides: 3,550 mm Max. tool weight: 32 t Equipment: Punch impact damper Speeds: Rapid descent speed: max. 500 mm/s, unregulated Working speed: 5 – 140 mm/s Return speed: 30 – 420 mm/s Pgsdpfszw Nq Dsx Af Sst Operating modes, table cushion: Return without locking, followed by ejection Return with locking and delayed ejection Operation with the pull cushion deactivated is possible Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Pedpoy U I Tujfx Af Sogt Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: new, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed Pgjdpfx Ajw U U Svef Sot * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: used, Die hydraulische Schwenkarmstanze mit einer automatischen Einstellung des Hubels, um mit dem Stanzmesser verschiedene Höhen zu schneiden, ohne dass eine Anpassung nötig ist. Hydraulic Clicking Press features automatic stroke adjustment, allowing the cutting die to cut at different heights without the need for manual adjustment. Hydraulische Schwenkarmstanze - hydraulic Clicking Press ATOM SE 22 Baujahr / Year 2003 - Serial-No. 10019735 Arbeitstisch / Working table 1200 x 500mm Stanzfläche / DIE Cutting Area 600 x 500mm Armweite / Travelling Head Size 370mm Pgedpfx Aoz Dw Uhjf Sst Schnittleistung / Power max. 22T / 215,8kN Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 1040kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Pgedpfxslc N R Ds Af Sjt

Year of construction: 2013, condition: used, - Press table: 3000 x 1400 mm Pedpozuz A Tofx Af Segt Membrane press Manufacturer: Columbus Type: Multimat Year of manufacture: 2013 Technical data - Press table: 3000 x 1400 mm Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Pgsdpfx Afjxmr Rxe Sst Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit.

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Psdpfx Afozvnfdo Sjgt Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm Pedpfoyzd I Ujx Af Segt -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Documents: Operating instructions/circuit diagram -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Podpfx Afohtaaqe Sjgt Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40