Used Finnpower Sheet Metal Processing Center for sale (59,508)

Condition: new, Year of construction: 2026, -TFON Edge Rounding Machine Specifications: Material Compatibility: Steel, Aluminum, Stainless Steel. Process: Edge Rounding. Material Thickness: 0 – 120 mm Maximum Material Width: 1,000 mm Minimum Part Dimensions: 50 × 50 mm Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Hedpfx Afeui Ih Rs Seu Machine Weight: 3.000 kg

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor Hedpfx Aezk Npgsf Sou - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Year of construction: 2018, condition: ready for operation (used), An automatic gKteso post-processing and deburring center is available. Technology: 6D, axes: 5+1, working dimensions X/Y/Z: 500mm/500mm/300mm, max. travel speed: 1m/s, repeatability: 0.05mm, path accuracy: 0.1mm, max. flatness: 0.02mm, chucks: 2-jaw/3-jaw/4-jaw chucks, machine dimensions X/Y/Z: approx. 2400mm/1800mm/2900mm, operating hours: approx. 12541h. Including pneumatic chucks, safety light curtain, exchange table and 6D technology. Documentation available. An on-site inspection is possible. Hodezlt N Tepfx Af Ssu

Condition: good (used), functionality: fully functional, XOCA 2000/5 sheet metal bending machine. Hodszurxlepfx Af Seu

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminal available Hodpjxxl Hqjfx Af Sou -Price: per piece -Weight: 28 kg/piece

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IP 10 with swiveling support ring Hedekm Rm Uspfx Af Seu -Clamping range: 0 - 50 mm -Load capacity: 6 t -Number: 8 terminals available -Price: per piece -Dimensions: 300/100/H430 mm -Weight: 25 kg

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUN with swiveling support ring -Clamping range: 0-40 mm -Load capacity: 9 t -Number: 7 terminals available -Price: per piece -Dimensions: 300/110/H470 mm -Weight: 28 kg/pc. Hedpfokm Rnnjx Af Ssu

Condition: used, 3 transmitter elements (clear width approx. 400 mm) 4,000 mm long, 1,700 mm high Warehouse location: Hodpfxsymp Rwo Af Sou

Condition: ready for operation (used), Year of construction: 1990, control type: manual, degree of automation: manual, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge adjustment: manual, back gauge: 800 mm, power: 7.5 kW (10.20 HP), overall weight: 1,800 kg, total length: 2,850 mm, total width: 2,350 mm, total height: 1,600 mm, cutting length (max.): 2,050 mm, throat depth: 300 mm, Guillotine shear, cutting length 2050 mm, cutting capacity 3.25 mm, throat 200 mm, motor 7,5 KW, working high 800 mm, back gauge 800 mm manual, dimension 2850x2350x1600 mm, weight ca. 1800 kgs Hjdpfx Afjzy Nlys Seu

Condition: new, Year of construction: 2026, ABKANTBANK-Technik KRUSE, your competent partner for bending machines. Free delivery up to 150 km. Standard equipment includes piano inserts (segment-divided upper, lower, and bending beams) for a wide range of bending options. Cassettes and special profiles with opposing bends can be easily manufactured with this model. Swivel bending machine, universally applicable for sheet metal workers, repair shops, and roofing companies. Segments can be individually moved and removed. Segmented tools on all beams allow for ample space for complex workpieces. Bending machine SGR 1250/1.5 Technical data: - max. working width: 1250 mm Other dimensions 1000 mm and 1400 mm available upon request. - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees Hsdpfxozuvbwo Af Ssu - max. sheet thickness (steel) 1.5 mm - Weight 250 kg Option to mount a guide rail for a roller shear: 300 EUR Accessory: roller shear (up to 0.8 mm): 350 EUR All prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Shipping within Germany: 220 EUR.

Condition: new, Year of construction: 2025, operating hours: 30 h, Panel benders (also known as swing bending machines or folding machines for sheet metal) are used across various industries where precise, automated bending of sheet metal components is required. The main sectors include: 🏭 Metalworking & Sheet Metal Processing Contract manufacturers / Sheet metal processing companies Series and single-part production Enclosures, housings, cassettes, boxes 🚗 Automotive Industry & Suppliers Structural and body components Brackets, covers, interior components Especially suited for mass production requiring consistent repeatability ⚡ Electrical Engineering & Electronics Switchgear and distributor manufacturing Enclosures for controls, servers, industrial electronics Very common use due to numerous 90° bends and complex contours ❄️ Household Appliances & White Goods Washing machines, refrigerators, ovens Internal frames, covers, claddings 🏗️ Construction Industry & Architecture Facade elements Roof and wall claddings Metal panels, cassettes 🚆 Transport & Public Transit Rail vehicles, buses, commercial vehicles Interior claddings, technical housings 🛠️ Mechanical & Plant Engineering Machine frames Protective claddings Switchgear enclosures 🌬️ HVAC / Air Conditioning Technology Ventilation ducts HVAC unit enclosures Air distribution systems 🏥 Medical Technology Equipment enclosures Stainless steel claddings High requirements for precision & surface finish Why Panel Benders in these sectors? ✔ High degree of automation Hedpfsyb Hu Nex Af Sju ✔ Excellent repeat accuracy ✔ Ideal for complex bent parts ✔ Gentle processing of painted or coated sheets ✔ Fast processing for small to medium batch sizes

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Cantilever machine (6 units) - Travel dimensions: X = 3,490 mm Y = 1,690 mm Z = 205 mm - Machining dimensions: X = 3050 mm Y = (Max. milling depth – tool radius) 1,345 mm Z = 150 mm - TF 20 drilling head - Power 2.2 kW Hodpfxozk Nz Ao Af Seu - 8 vertical spindles, spindle spacing 32 mm in the X direction - 6 vertical spindles, spindle spacing 32 mm in the Y-axis - 2+2 horizontal spindles in the X-axis - 1+1 horizontal spindles in Y-axis - with integrated 120 mm grooving saw blade - with 9.2 kW electric milling spindle with ISO 30 mount - with C-axis - with angle unit - with 12-position tool changer - with tool change station for angle units - with vacuum pump 80–100 m³/h - Total connected load 16 kW - Compressed air 6 bar - Compressed air consumption 210 NL/m - Extraction connection 250 mm - Extraction volume 5,300 m³/h - Extraction velocity 30 m/sec - Dimensions: 5940 x 3800 x 2510 mm - Weight: 3,700 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1985, Offer 25425 Technical Data - Motor-driven top roll: 175 x 30 mm - Bottom rolls free-running: 250 x 50 mm - Top roll adjustable via handwheel - Top roll diameter: 175 mm - Bottom roll diameter (each): 250 mm - Throat depth: 1100 mm - Distance from base plate to bottom roll: 1520 mm - Drive: 400 V - Required space approx. W 900 x H 2650 x D 2000 mm Hodpfx Afjx T Urhs Sou - Weight approx. 1500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, ADV 508 RYW 800 EU – Deburring & Edge Rounding Machine The ADV 508 RYW 800 EU is a powerful automatic machine for deburring, edge rounding and surface finishing of laser-cut, plasma-cut and punched sheet metal parts. The combination of a wide grinding belt, rotating brushes and disc brushes allows efficient processing of both outside contours, inside contours and holes. Expected in stock from September 2026 and available for demonstrations in our showroom. Main Features 800 mm working width Deburring, edge rounding and surface finishing Wide belt grinding unit for burr removal 4 rotating brushes for multidirectional processing 7 disc brushes for edge rounding of contours and holes Suitable for steel, stainless steel and aluminium Vacuum and magnetic workpiece holding Servo-controlled height adjustment Siemens / Delta PLC control Touchscreen HMI Technical Specifications Model: ADV 508 RYW 800 EU Working width: 800 mm Material thickness: 0.5–100 mm Minimum workpiece: 50 × 50 mm vacuum / 30 × 30 mm magnetic Feed speed: 0.5–7 m/min Grinding belt: 2,000 × 820 mm Grinding belt motor: 15 kW Grinding belt speed: 0–15 m/s Rotating brushes: 4 × Ø300 × 300 × 40 mm Rotating brush motors: 2 × 2.2 kW Disc brushes: 7 pcs. Disc brush motors: 7 × 1.1 kW Disc brush speed: 0–24 r/s Disc brush oscillation: 0–30 mm adjustable Vacuum pump: 15 kW Height adjustment: Servo-controlled Control: Siemens / Delta PLC Operating panel: Touchscreen HMI Power supply: 3~ 380 V / 50 Hz Complete Finishing in One Pass Hsdszwqwfjpfx Af Sju The wide grinding belt removes heavier burrs and prepares the surface. The rotating and disc brushes subsequently process the workpiece from multiple directions, providing consistent edge rounding on external contours, internal contours and holes. This makes the RYW configuration particularly suitable for companies processing a wide variety of complex sheet metal components where consistent and reproducible finishing is required. Service & Availability The ADV 508 RYW 800 EU is expected in stock from September 2026 and will then be available at short notice. The machine can be viewed and demonstrated in our showroom by appointment. Besten Machines provides technical support, spare parts, consumables and service from our locations in the Netherlands and Germany. Contact us for a quotation or demonstration with your own workpieces.

Condition: new, Year of construction: 2026, total length: 1,450 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 500 kg, power: 4.75 kW (6.46 HP), FC 120 ZK Working capacity Ø 120x120 mm, No. of belt stations (Z) 1, No. of brush stations (K) 1, Sanding belt, dimensions 120x1850 mm, Brush belt dimensions 120xØ200 mm, Sanding belt speed 20 m/s, Brush belt speed 15 m/s, Feed speed 12 m/s, Sanding belt motor per head (x1) 3 kW, Brush motor per head (x1) 1.5 kW, Hedpot D D Nzsfx Af Sju feed motor 0.25 kW, Total power 4.75 kW, Power consumption 12A, Rod suction connection per head Ø (2x) 80 mm, Dimensions 1450x800x1800 mm, Weight 500 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Hsdpfx Afjkm Rnyj Sou -Manufacturer: ip, safety lifting clamp type IPUZ with swiveling support ring -Clamping range: 0 - 25 mm -Load capacity: 3 t -Number: 1x terminals available -Price per piece -Dimensions: 230/90/H380 mm -Weight: 16 kg/pc.

Condition: new, neu ca. 10 Wochen ab Auftrags Hodpswiryhofx Af Seu Italien 13600 € 261.12 € 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.

Condition: excellent (used), functionality: fully functional, Timesavers Series 22-1100-WTBTB Hodpjznlxrjfx Af Sju The Series 22-1100-WTBTB, with a passage width of 1100 mm and a table opening of 0.8-100 mm, is ideally suited for processing laser-cut, stamped, waterjet-cut, or plasma-cut parts thanks to its 3 stations. The belt grinding station allows for the removal of burrs and raised edges. Subsequently, the edge is deburred and slightly rounded using the disc brushes. To achieve a uniform result, we have incorporated two oscillating brush stations in which the disc brushes rotate alternately to the left and right. Thanks to the quick-change system for the belt and brushes, the machine can be reconfigured in just a few steps. The conveyor belt, as well as all other stations, are frequency-controlled, allowing for stepless speed adjustment.

Condition: new, Year of construction: 2026, Free delivery up to 150 km. The ZGR3000/1.0mm press brake from Prod-Masz is available on-site for testing and immediate purchase. You will receive on-site technical training. Technical data: -Working width 3140 mm -Sheet thickness up to 1 mm -30% higher sheet thickness for non-ferrous metals -Bending angle up to 145° -Bending flange: 20 mm -Throat: 80 mm -Gas springs -Degree scale -Stop for preset bending angles -Shelf for sheet metal -Weight approx. 550 kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available upon request. Optional accessory: Roller shear (up to 0.8 mm) EUR 350 All prices are subject to an additional 19% VAT. CE certificate Hedpfezdcl Njx Af Seu Warranty: 12 months Self-collection Shipping within Germany: EUR 360

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Hodpfelu N Edox Af Ssu -Manufacturer: ip, safety lifting clamp type IP N with swiveling support ring -Clamp range: 0-40 mm -Load capacity: 6 t -Number: 6x clamps available -Price per piece -Dimensions: 280/100/H460 mm -Weight: 26 kg/pc.

Condition: new, Year of construction: 2026, -TFON Lite SURFACER® Series Hedpfx Afoqzxhye Ssu The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications. -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety. -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality. Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Mechanically adjustable rear stop (2 speeds) up to 1000 mm with analog display Side stops and table extensions cutting length limitation Cutting edge lighting Hedpfxezl Dr Sj Af Sju knife sharpened Weight approx. 5500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2005, Hydraulic Swivel Bending Machine Manufacturer: TENSOL, Type: H200.60 Year of Manufacture: 2005 Technical Data Manufacturer: TENSOL Type: H200.60 Year of Manufacture: 2005 Usable Length: 6000 mm Capacity: 2 mm Motor Power: 7.5 kW Dimensions: approx. L 7.00 x W 1.60 x H 2.20 m plus hydraulic unit (1.1 x 0.7 m) Weight: approx. 8 tons Equipment • 2D graphics control • Automatic sheet thickness adjustment • Controlled rear stop, 1000 mm • Overhang 1050 mm • Automatic roller shear • Bending rail 10 mm • Reinforcement rail 15 mm All information is without guarantee. A demonstration is possible at any time in our showroom. Hsdpfxezumhhs Af Sou

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) Hodpshmmfkefx Af Sou - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Hjdpfx Afozwt Rbe Sju