Used Bunch Press - Horizontal for sale (18,446)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Iedpozdn H Rofx Aqueic Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Empty weight: 5.500 kg - Year: 1986 Iiodpfjylb Edjx Aqusc - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No Iiodpfszdnzhsx Aquoc - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, machine/vehicle number: 46650051, Horizontal machining centre Ijdpegay Evsfx Aqujic with multipallet+B39 NIIGATA SPN 501-P8 FANUC 18I-MB Accessories: Chip conveyor High pressure cooling system through the spindle the spindle line

Condition: used, Year of construction: 2005, Max. pressing force 80 t Max. length 2500 mm Stroke 200 mm Iisdjzdf D Uspfx Aquoc Machine weight 5750 kg

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Iedpfx Aezddrdsquoic

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, pressing force: 320 t, stroke length: 445 mm, table length: 4,420 mm, throat depth: 420 mm, clearance between the columns: 3,680 mm, total width: 5,300 mm, total height: 3,200 mm, overall weight: 25,000 kg, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Iijdpfx Ajzdc A Ijquec Safety - Standard safety devices

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 62500 € 1181.25 € Ijdpfjynna Tsx Aqusic 63 to 750 mm 500 mm 170 mm 4 - 102 mm 54 1/min 490x325 mm 90 mm 270 mm 440 mm 7.5 kW 1800 mm 1150 mm 2750 mm 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 79900 € 1510.11 € 130 to 1000 mm 640 mm 210 mm 5 - 110 mm 60 1/min 630x400 mm 90 mm 330 mm 11 kW 2200 mm 1372 mm 3000 mm 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment Isdpfxeynnbqs Aqueic mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules

Condition: good (used), Year of construction: 2021, 1 Hydraulic CNC press brake Manufacturer: Bystronic Type: X act smart 225/4100 Year of manufacture: 2021 Iiodpezdb A Hjfx Aqujc Control system: ByVision Technical data: Bending length: 4100 mm Press force: 225 tons Stroke: 200 mm Open height: 480 mm Distance between side columns: 3420 mm Overhang: 400 mm Max. back gauge range in x: 850 mm Travel in x: 600 mm Travel in R axis: 150 mm Travel in z axis: 1800 mm Y rapid traverse with High Speed Package: 160 mm/sec Y working traverse with High Speed Package: 13 mm/sec Machine weight: 15 tons Drive power: 15 kW Equipment: Controlled hydraulic crowning Fast Bend S safety system 2 manually adjustable back gauges Mechanical tool clamping Side and rear guards with electrical monitoring Linear guide on the lower beam 4-axis back gauge: x, r, z1, z Additional back gauge finger, manually adjustable in the Z direction Various bending tools

Condition: new, neu 00821 prompt, Zwischenverkauf v 1210 € Iisdpfszda A Esx Aqusc 1 805 mm 88°, R=0.6MM H=115MM, Split into left horn section 100/370/10/15/20/40/50/100/100 mm, right horn section, made from 42CrMo4 tool steel, induction-hardened to 54-60 HRC,polished

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Ijdszdazhjpfx Aquoic Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Iedjzdazbepfx Aqusic Price is for a set of two machines.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. Isdszdaxyspfx Aquoic 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 230V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. Iiodpfx Aqjzdawvjusc The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Iiedpezdav Eofx Aqusc Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Baier Geba 1/P Hot Stamping Press The machine is in perfect condition and ready to use. Iisdpszdaunjfx Aquoc This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. A stand is included. Description The Baier Geba 1/P hot stamping press is an automatic press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or printing house. The automatic presser starts and operates on a 230V power supply with compressed air. A powerful presser with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Heating temperature control Heating plate pressure mechanism: automatic Press force: 8 kN Power consumption: 320 W Plate size: 110 x 70 mm Power supply: 230 V Machine weight: 150 kg

Condition: good (used), - Completely overhauled by us, ready for immediate use - Type: 100013 - Serial number: 011136 Iijdpjr Nvldjfx Aqusc - Glass thickness 2-12 mm - Minimum glass dimensions 120 x 80 mm - Max. Washing width: 1000 mm - Dimension: L=2900mm W=1650mm H=1250mm - Roller spacing 55mm -3 pairs of brushes / 1 pair of racks - Connected loads: 380/50V, 13kW - Price on request

Condition: used, machine/vehicle number: 16788, Year of construction: 2016, load capacity: 2,500 kg, load center: 1,200 mm, construction height: 1,400 mm, fork length: 2,400 mm, overall weight: 1,110 kg, enginetype: Electric, manufacturer: Jungheinrich Iodpfx Asx Tmmkoqueic

Condition: used, machine/vehicle number: 16873, Year of construction: 2019, operating hours: 4,000 h, load capacity: 1,600 kg, lifting height: 800 mm, load center: 1,200 mm, construction height: 1,660 mm, fork length: 1,150 mm, overall weight: 1,720 kg, enginetype: Electric, manufacturer: Still Iiedpjym Hzajfx Aquoc

Condition: used, machine/vehicle number: 16872, Year of construction: 2019, operating hours: 3,104 h, load capacity: 1,600 kg, lifting height: 800 mm, load center: 1,200 mm, construction height: 1,660 mm, fork length: 1,150 mm, overall weight: 1,600 kg, enginetype: Electric, manufacturer: Still Iodpfxoym Hyvs Aquoic

Condition: used, machine/vehicle number: 16871, Year of construction: 2020, operating hours: 6,447 h, load capacity: 2,000 kg, lifting height: 800 mm, load center: 1,200 mm, construction height: 1,400 mm, fork length: 1,150 mm, overall weight: 1,602 kg, enginetype: Electric, manufacturer: Still Iiedpoym Hx Ejfx Aqujc

Condition: used, machine/vehicle number: 10164, Year of construction: 2006, operating hours: 7,578 h, load capacity: 2,000 kg, lifting height: 200 mm, load center: 600 mm, construction height: 1,000 mm, fork length: 2,400 mm, overall weight: 900 kg, enginetype: Electric, manufacturer: Jungheinrich Iiedpfxow R Achj Aqusc

Condition: used, machine/vehicle number: 17041, Year of construction: 2019, operating hours: 6,573 h, load capacity: 1,200 kg, lifting height: 780 mm, load center: 600 mm, construction height: 1,400 mm, fork length: 1,200 mm, front tire size: , rear tire size: , overall weight: 1,447 kg, enginetype: Electric, manufacturer: Still Isdoy Hnhvepfx Aqusic

Condition: used, machine/vehicle number: 17040, Year of construction: 2019, operating hours: 5,801 h, load capacity: 1,200 kg, lifting height: 780 mm, construction height: 1,400 mm, fork length: 1,200 mm, front tire size: , rear tire size: , overall weight: 1,486 kg, enginetype: Electric, manufacturer: Still Isdpoy Hnhpjfx Aqujic