Used Agie Ona-Compact 30 for sale (29,187)

Condition: used, Weiss   Type: WT1-340/30   Converted to R452a   Weiss temperature chamber, air-cooled   Temperature range: from -30°C to 180°C   Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min   Test chamber dimensions: Width 550 mm x Depth 750 mm x Height 800 mm Housing dimensions: Width 800 mm x Depth 1500 mm x Height 1800 mm   Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, Rated current: 9 A   Refrigerant: R452a   Weight: 515 kg   For your safety as a buyer, please note the following information:   The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of delivery: (See picture)   Ibjdpfxjzd Rw So Ahysc (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Iodpfx Ahjzh D S Royjbc Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature time-based ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid. Water level = 0 mm The water level is at the upper edge of the support grid. Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on customer's side Weight approx. 890 kg net For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1998, functionality: fully functional, cooling capacity: 3.3 kW (4.49 HP), input voltage: 400 V, input frequency: 50 Hz, Oil cooler - Flow-through oil cooler D20V D30V 2 Flow-through oil coolers - cooling system for machine cooling - individual sale possible. Two stand-alone flow-through oil coolers/circulation coolers from Wöhr Kältetechnik for cooling/temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet with connection cable integrated into the housing, LAE temperature controller MTR11, and potential-free alarm contact in case of malfunction. The integrated circulation pump is a gear pump. The cooling units are suitable for clean oil. Instructions for programming the temperature controller are available. Both coolers are in used condition. Cooling unit. Wöhr flow-through oil cooler, type D 20 V Year of manufacture 1998, serial no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with Walter Procon connection plug (cooler was installed on the hydraulics of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW. Flow-through oil cooler D 30 V Wöhr flow-through oil cooler, type D 30 V, year of manufacture 1998, serial no. 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400V, 50Hz, LAE controller MTR11, with CEE connection plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and well maintained. Ijdpfxjg U H E So Ahyebc Price negotiable. Our asking price per unit is €1,950.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors/changes. We only sell to countries within the European Community.

Condition: used, Year of construction: 2002, Cutting length: 4600 mm Vertical cutting height: 2070 mm Horizontal cutting height: 1958 mm Cutting depth: 60 mm Saw motor: 3 kW Saw blade diameter: 250 mm / Bore: 30 mm Speed: 5250 rpm Dust extraction port diameter: 2x 100 mm Dimensions: 5716 x 1500 x 2814 mm Iodpfx Ahoz Ny Sbjysbc Weight: approx. 700 kg Storage location: Nattheim

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines. Iedpfx Ajrtq I Ejhysbc

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Iodpfxofh Tmms Ahyobc Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: new, Year of construction: 2024, load capacity: 30 kg, arm reach: 2,100 mm, controller manufacturer: KUKA, controller model: KRC5, teach pendant manufacturer: KUKA, control cabinet width: 60 mm, control cabinet height: 100 mm, ROBOTIC ARM BRAND: KUKA MODEL: KR 30 R2100 / SEL TECHNICAL DESCRIPTION PAYLOAD: 30 KG MAX. REACH: 2100 MM YEAR OF MANUFACTURE: 2024 Iodpfsz Szl Iex Ahyebc CONTROL UNIT: KRC5 SOFTWARE: KSS 8.7 OPTIONS: KRC 5 dualcab BA C5 dualcab AC SPB USB KSI

Condition: used, Year of construction: 2002, operating hours: 16,767 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Year of manufacture: 2002 Empty weight: 5.530 kg Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes General condition: average Technical condition: average Visual appearance: average Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = Ibsdpjz Iz U Tjfx Ahysc - Free lift - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Reconditioned: Yes Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2017, operating hours: 1,409 h, Equipment: all wheel drive, Now available: Claas 535 Torion, identical to the Liebherr L506 Compact We are pleased to offer you the Claas 535 Torion with excellent special equipment. Condition: New Availability: Immediately from stock. Why Zirndorfer-Maschinenpark? Official dealer for Bobcat & XCMG * Family-owned business with over 45 years of experience * Our own workshop for guaranteed quality * Large selection of new and used machines Ibodez S S I Tepfx Ahyoc Financing, leasing, or hire purchase? No problem – we will find the right solution for you through our partner banks. Would you like to trade in your used machine? We will gladly accept your machine in part exchange under fair conditions. Attachments and accessories? We will be happy to offer additional attachments and suitable accessories on request. Sale to EU or non-EU countries? We will handle the process for you. Machine equipment: * Hydraulic quick coupler * Rear hydraulics * Snow blade * Salt spreader * Three-point linkage at the rear * Bucket & pallet fork * Air conditioning * Recently serviced * Year of manufacture: 2017 * Model year: 2018 * Operating hours: 1409 Trust in the experience of a third-generation family business. Zirndorfer-Maschinenpark e.K. – Your partner for construction machinery. Contact us now and secure your individual offer. Legal notice: The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, or data transmission errors. Subject to change.

Condition: used, Year of construction: 2010 Attachment suited for: Construction machines Ibsdpfxoz S E H No Ahysc Availability: in stock

Condition: used, Attachment suited for: Construction machines Ijdsz S E Duopfx Ahyobc Bucket volume: 0.35 m^3

Condition: ready for operation (used), Year of construction: 2004, punching force: 31 t, sheet thickness (max.): 6 mm, CNC punching machine manufactured in 2004. This Euromac BX 1250/30 features advanced capabilities for precision punching tasks. If you are looking to get high-quality punching capabilities, consider the Euromac BX 1250/30 machine we have for sale. Contact us for further details. Ibodpfxjz S Icme Ahysc

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,567 h, load capacity: 2,500 kg, lifting height: 4,600 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,830 mm, motor manufacturer: Volkswagen, fork length: 850 mm, overall weight: 4,800 kg, empty load weight: 4,900 kg, total height: 2,830 mm, total length: 2,020 mm, total width: 2,270 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, adjustable boom, cabin, hydraulic fork positioner, pallet forks, Very good condition Wide fork positioner We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide. Ibjdpfjz S In Nox Ahysc

Condition: used, Width: 70 cm Ibjdpfx Ahjz S E Nksyjc

Condition: used, Year of construction: 2005, Overview NATE PETBLOK 30/60/8 rinser-filler-capper monoblock for PET bottles, built in 2005 in the Czech Republic. Counter-pressure filling for carbonated soft drinks and sparkling water, also used for still water and other non-carbonated beverages. Output up to 11,000 bottles/h on 1.5 L PET. The machine is still installed, under power and in production. Technical data - Manufacturer: NATE (Czech Republic) - Model: PETBLOK 30/60/8 - Year: 2005 - Output: up to 11,000 bottles/h (1.5 L PET) - Bottle formats: 0.33 L, 0.5 L, 0.85 L, 1.0 L, 1.5 L and 2.0 L PET - Neck finish: PCO 1881 (short neck) - Products: carbonated soft drinks, carbonated and still water, non-carbonated beverages Equipment - Rinser, counter-pressure filler and capper in one monoblock - Bottle infeed with feed screw and neck-handling starwheels - Cap elevator with chute to the capper - Operator panel Siemens SIMATIC Multi Panel - Full guarding with doors Condition Used, in good working condition, installed and running in production. The machine can be seen in operation before dismantling. Availability In production until 23 December 2026, ready for pickup from January 2027. Location: Serbia. Iedpjz R Ulmjfx Ahysbc

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 120 Production capacity: 120 m3 Mixer type: Twinshaft – 3 m3 Aggragate bunker: 4x20 m3 Cement weighing: 1750 kg Additives weighing: 40 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 120 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor Ijdpoz Rn Eljfx Ahyobc • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 6,428 kg, construction height: 2,050 mm, fuel type: electric, total length: 5,110 mm, drive type: Elektro, construction width: 1,190 mm, working height: 11,140 mm, Articulated telescopic platform Iedjyr T Nnopfx Ahyebc Technical condition: New

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Ibsdpfx Aez R Sxdshyec Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: used, Year of construction: 2001, This machine is fitted with a new Siemens PLC and touch panel. Technical specifications: - Manufacturer: Unisanding - Model: 2.2.0. 0-30 - Working width: 1300 mm - Year of manufacture: 2001, retrofitted in 2025 - 2 rollers, flexibly adjustable from 0–30°, operating from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass panel on the operator side - Sanding motors: 2 × 2.2 kW with thermal cut-out - Feed motor: 1 × 1.5 kW with thermal cut-out - Vacuum motor: 1 × 5.5 kW - Roller height adjustment axis: 1 × 0.18 kW - Feed speed: 2–10 m/min, frequency-controlled - Brush speed: 50–350 rpm, frequency-controlled - Voltage: 3 x 400 V, 50 Hz - Electrical power rating: 15 kW - Fuse: 63 A - Exhaust air volume (vacuum): 3,000 m³/h - Dust extraction volume: 5,000 m³/h (to be provided by the customer) - Length: 2,170 mm - Width: 2,040 mm - Height: 2,030 mm - Weight including control cabinet: 2,220 kg Ibsdpfextakmex Ahysc - Colour: RAL 7035 light grey/black - Operating side: left/right - Brush replacement side: right - Explosion-proof version: No - Location: at the Blomberg warehouse

Condition: good (used), loading space length: 8,900 mm, loading space width: 1,720 mm, loading space height: 2,130 mm, color: red, General information Year of manufacture: 1999 Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 3.500 kg Functional Lifting capacity: 200 kg Lift height: 2.800 cm Ibodpfxozanclj Ahyec Working height: 3.000 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1160 m Max swing of arm in degrees: 90 Max swing of platform in degrees: 999 Latest inspection: 2026-06-30 Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: good (used), operating hours: 285 h, fuel type: electric, Year of manufacture: 2007 Year of construction: 2007 Drive: Wheel GVW: 1.950 kg Dimensions (LxBxH): 249 x 120 x 200 cm Working height: 825 cm Technical condition: good Visual appearance: good Please contact Ton for more information Manufacturer: Haulotte Type: Compact 8W Year of manufacturing: 2007 Weight: 1.950 KG Hourmeter: 285 Drive: Elektrisch Product number: 23097 Platform height: 6,25 meter Working height: 8,25 meter Platform measurements: 231x120 cm Extendable platform: 92 cm Total measurements LxWxH: 249x120x200 cm Max. platform load: 450 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Ibodpfx Ajy S Uhmohyec Price: € 2.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: good (used), mileage: 319,976 km, power: 105 kW (142.76 HP), first registration: 01/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,920 mm, fuel: diesel, fuel tank capacity: 71 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 2, total length: 5,930 mm, total width: 2,020 mm, total height: 2,350 mm, permissible axle load (axle 1): 1,750 kg, permissible axle load (axle 2): 2,100 kg, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, power assisted steering, power mirror, sliding door, soot filter, traction control, General information Number of doors: 6 Year of construction: 2020 Registration number: VDZ-30-P Technical information Number of cylinders: 4 Ijdpfxszwqgte Ahyobc Engine capacity: 2.143 cc Front axle: Max. axle load: 1750 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Max. axle load: 2100 kg; Tyre profile left: 70%; Tyre profile right: 70% Weights Empty weight: 2.037 kg Carrying capacity: 1.463 kg GVW: 3.500 kg Functional Cooling: 18 °C to 30 °C Make of bodywork: KONVEKTA Cooling engine: engine driven Maintenance, history and condition APK (MOT): tested until 01/2027 Technical condition: very good Visual appearance: good Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - Leaf spring suspension - Multifunctional Steering Wheel - Particulate filter - Radio/Cd/Audio system - Side Door Right = Remarks = Video of working vehicle: Mercedes Sprinter 314 CDI Refrigerated Van Year of manufacture 2020 Konvekta cooling -18/+30 Cooling works perfectly, vehicle in very good technical condition. 319,000 KM verifiable with Mileage Pass

Condition: excellent (used), operating hours: 4,712 h, lifting height: 4,190 mm, fuel type: electric, mast type: duplex, total height: 2,710 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Year of construction: 2018 Empty weight: 5.408 kg Battery: 38 kWh CE mark: yes Technical condition: very good Visual appearance: very good Damages: none Isdpfx Asy U Urqjhyebc = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Pallet forks - Side shift - Work lamp(s)

Condition: excellent (used), Year of construction: 2020, operating hours: 200 h, ABB IRB360 Picker + IRC5 Compact controller, 2nd generation + TPU, as new DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Ijdpfx Ahez Taggjysbc

Condition: good (used), lifting height: 2,370 mm, fuel type: electric, General information Year of manufacture: 2013 Weights Empty weight: 2.630 kg Functional Lifting capacity: 300 kg Working height: 1.200 cm Dimensions of cargo space: 245 x 121 x 237 cm CE mark: yes Condition Technical condition: good Visual appearance: good Iedpfov Timujx Ahyebc Other information Delivery terms: EXW Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Compact 12 Year of build: 2013 Condition: Used Data: Max. working height: 11,96 m Platform height: 9,96 m Lifting capacity: 300kg Lifting capacity on extension: 150kg Platform dimensions LxW: 2,29 x 1,17 m Platform length pushed out: 3,22 m Total dimensions LxW: 2,45 x 1,21 m Height transport position with railing: 2,37 m Height transport position without railing: 1,50 m Movable up to working height: 11,96 m Ground clearance: 0,07 m Drive type: Batterie indoor use only: nein Empty weight: 2.630 kg Special features: weiße Reifen, Anschlagpunkte für Rückhaltsysteme (PSA) vorhanden