Used Trumpf Bending Machine for sale (64,151)

Condition: new, working length 2050 mm 2.0 mm max. wire thickness 3.0 mm Underfloor 110 mm motor strength 165 mm motor strength 22 kW bending speed 5.2 mm/min length 3150 mm height 1150 mm width 850 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. Dkodpfx Aoyv N Dweh Ion - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm Dkjdpfsyv Nwqex Ah Isn tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, sheet width 2100 mm plate thickness 40 mm pre-bending 30 mm upper roll diameter 390 mm lower roll diameter 360 mm side roll diameter 300 mm total power requirement 22 kW Dkodpfsyv Nt Ejx Ah Ien machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears Dodpfoyv Nniox Ah Iskn - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm I-beam section - upend 50 x 15 mm roll diameter 157 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg Dsdpfx Asyv Nk Reh Iskn dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings Dsdpfx Aoyv Nh Njh Iokn - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 10 mm pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm Dkodpfx Ahoyv Nhce Ion total power requirement 11 kW weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings Dedpfx Aoyv Nf Ujh Iekn - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 6 mm pre-bending 5 mm upper roll diameter 200 mm min. bending diameter Ø 300 mm Dodjyv Nf Ispfx Ah Iokn bending speed 5 m/min total power requirement 5,5 kW weight of the machine ca. 4.000 kg dimensions of the machine ca. 4800x1300x1270 mm

Condition: new, sheet width 1050 mm plate thickness 3,3 mm pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls Djdpfsyv Nfbox Ah Iskn

Condition: new, sheet width 1050 mm plate thickness 1,8 mm pre-bending 1,5 upper roll diameter 70 mm min. dia. 105 mm total power requirement 1,1 kW Djdpfxoyv I U Io Ah Iekn weight of the machine ca. 320 kg dimensions of the machine ca. 1700x700x1100 mm

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) Dksdpjyv I Ubsfx Ah Ion - Calibration

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device Dedpsyv I Smofx Ah Iokn - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 1050 mm plate thickness 1 mm Dkodpsyvvn Ajfx Ah Ijn roll diameter 56 mm dimensions of the machine ca. 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm Dsdpfoyvvrhex Ah Iskn weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: Dkedpfxoyvvrbj Ah Ijn - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1250 mm plate thickness 5,5 mm pre-bending 5,0 mm roll length 1280 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1365 kg range L-W-H 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller Dksdpfjyvvpysx Ah Ien - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Dsdeyvvnispfx Ah Ijkn Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Dedpsxpqy Dofx Ah Iokn Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) Dkedpfsh Dwqhox Ah Isn • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: used, Year of construction: 2012, Make: ROSENBERGER, Model: RB20-LR, Year of manufacture: 2012, Serial no.: M1057, 2 CNC bending heads, Bending capacity Ø 30 x 2 mm (steel), Bending planes selectable within a total tool height of 138 mm, Travel range X/Y/Z 1,416 x 260 x 1,170 mm, Collet head with feed slide, PLC control Siemens S7-300, Touch display, Loading magazine, 2 robots, make: Motoman, Robot control unit, make: Yasnac, Model: K10, Teach-in terminal MRC, Spray cleaning system, Chamber size 500 x 300 x 1,000 mm, PLC control with operator panel, make: Siemens, Model: SIMATIC Panel, Thermostat, 3 washing chambers, Tube cutting station, make: FZH, year: 2012, serial no.: M99964, Control system, Display make: Siemens, Model: SIMATIC Panel touch. Dkodpfxsyx Erio Ah Ion

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Various back gauge options available: Dkodpjy Stwaofx Ah Ijn - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg

Condition: used, Swing bending machine Type: Weingarten ALH Condition: Used Technical Data Sheet thickness: 1.25 mm Dkjdjy I U U Sjpfx Ah Ien Bending length: approx. 2030 mm

Condition: used, Year of construction: 1998, Used DAVI 4-Roller Plate Bending Machine MCB 2020 Technical specifications: Year of manufacture: 10/1998 Manufacturer: DAVI Sheet working width: 2000 mm Sheet bending thickness: 10 mm Pre-bending thickness: 8 mm Roll length: 2050 mm Connections: 400V / 50Hz / 10 HP Dedpfx Aey I Uh Sjh Iskn Power: 4 kW Surface-hardened 4 rollers Variable bending and rolling speed Safety device with emergency stop switch Digital display of the 4-roller positions on the screen

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, foot remote control, CRONOSSTECH PKH 160 Profile Bending Machine The CRONOSSTECH PKH 160 model offers maximum efficiency in heavy-duty profile bending applications thanks to its robust construction and powerful hydraulic system. All three rolls are driven, enabling stable and precise bending without slippage. Key Advantages - Three rolls driven by hydraulic motors - High-strength, durable construction - Horizontal and vertical operating capability - Digital displays for precise bending - Heavy-duty industrial application Areas of Use - Steel construction fabrication - Tube and profile bending applications - Machinery and equipment manufacturing - Shipyard and marine industry - Automotive and auxiliary industries Standard Features - Welded steel frame construction - Three rolls driven by hydraulic motors and planetary gearboxes (individual planetary gear for each roll) - Hardened and ground shafts made from special high-strength materials - Hardened standard rolls - Mobile and independent control panel - Horizontal and vertical working positions - Dual-speed operating system - Digital displays (2 units) - Three-way hydraulic side supports Optional Features - Special rolls, bending and reducing tools - NC control system Technical Specifications – PKH 160 - Roll diameter: Ø160 mm - Roll bearing diameter: Ø500 mm - Working speed: 3 – 6 m/min - Motor power: 22 kW - Machine length: 2500 mm - Machine width: 2350 mm Dedpfoy Hgwisx Ah Iekn - Machine height: 2600 mm - Weight: 10,700 kg Production Note: This machine is manufactured by CRONOSSTECH in Turkey. It is designed in line with high-quality standards and is suitable for industrial use.