Used New Jainnher Cylindrical Grinding Machine for sale (76,431)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 Cjdpfeuxfu Nsx Ailshc - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: refurbished (used), Year of construction: 2026, Kellenberger 1000U universal grinding machine, refurbished Technical details: - distance between centers : 1000 mm - centers height : 125 mm - grinding diameter: 250 mm - table orientation : -/+ 8 ° Codpfxezxnf As Ailjhc - universal wheelhead - grinding wheels dimensions : 400 x 50 x 127 mm - motor power : 3 kW - spindle speed : 1500 / 1700 / 2200 - orientation of grinding wheel holder headstock : 270 ° (3 x 90°) - boring for internal spindle : 90 mm - orientation of part holder headstock : 180 ° - spindle speed : 20 - 400 rpm - spindle internal cone : Morse 5 - motor power : 0,9 kW - inner cone tailstock : Morse 4 - tailstock sleeve travel: 30 mm - dimensions : 2860 x 1680 x 1670 mm - weight : 2500 kg Accessories/options: - automatic cycle works - tailstock - lubricating tank with pump - 1 internal grinding spindle - external grinding wheels - coolant tank with paper band filter type - wheel dresser - documentations - etc... The machine is partly overhauled, included: - new geometry - new electrical cabinet - bearings replaced - new painting - etc....

Condition: used, functionality: fully functional, For sale is a high-precision universal and tool grinding machine, Strausak AG, Type 57U. Thanks to its versatile design with a cross table, it is ideal for tool, mold, and gauge manufacturing. It handles demanding grinding tasks on highly hardened workpieces (even in the range of 60–65 HRC) with absolute reliability. The spindle speed can be flexibly adjusted, and the maximum longitudinal travel of the X-axis is 600 mm with a center distance of 780 mm. The machine is in good condition. Machine Type 57U Manufacturing No. (Serial Number) 10686 Order No. 44137 Voltage (Volts) 380 V Frequency (Hz) 50 Hz Technical Feature Specification Max. Table Stroke / Longitudinal Travel (X-axis) 600 mm Center Distance (Workpiece Length max.) 780 mm Center Height 125 mm – 175 mm (depending on height blocks) Max. Grinding Diameter approx. 348 mm Table Dimensions 1,030 mm x 214 mm Table Swivel Range ± 9° Machine Weight (Net) approx. 2,500 kg (Shipping Weight approx. 2,700–2,800 kg) Chsdev E Ivfopfx Ailjc Net Machine Dimensions (L x W x H) approx. 2.30 m x 1.50 m x 1.50 m Recommended Space Requirement (Installation) at least 3.50 m x 2.50 m Spindle Speeds Continuously variable / Belt stages from 2,250 to 6,000 rpm Table Feed Continuously adjustable from 0 to 16 mm/min Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Chedpfxovca Izo Ailjc Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: used, Center height: 180mm, distance between centers: 1000mm, max. grinding diameter: 355mm, stop accuracy: 1µm, max. workpiece weight: 500kg, max. workpiece weight when machining in the chuck: 120kg, max. workhead spindle speed: 355rpm, workhead spindle power: 1.5kW, Morse taper: MK5, workhead swivel range toward the grinding wheel/away from the grinding wheel: 90°/10°, quill travel: 40mm, table feed during longitudinal grinding: 0.05m/min-5m/min, travel during longitudinal grinding: 4mm-2180mm, dwell time at reversal point: 0s-5s, max. grinding spindle speed: 1860rpm, grinding wheel dimensions diameter/width/bore: 630mm/125mm/305mm. Weight: approx. 5100kg. The machine has been geometrically reconditioned. Documentation available. An on-site inspection is possible. Cjdpfx Aiozwpg Eslshc

Condition: ready for operation (used), An older precision cylindrical grinding machine Kellenberger including accessories is available. Centre width: 200mm, centre height: 125mm, max. workpiece weight: 3kg, max. workpiece diameter: 245mm, max. workpiece length: 130mm. An on-site inspection is possible. Codpew Edpgefx Ailehc

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Codpfx Aieh Rit Eeljhc Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 25 kg, grinding length: 320 mm, grinding diameter: 160 mm, year of last overhaul: 2025, TOS BU 16 cylindrical and bore grinder, refurbished and under warranty. Workpiece diameter: 160 mm Maximum distance between centers: 320 mm Maximum weight of workpiece in centers: 25 kg Cjdpfjzcwg Sox Ailshc Detailed offer available upon request.

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Cjdotqf Sqepfx Ailohc Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Chsdpfx Aietqf Rzoloc Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Csdozrt Ipspfx Ailehc Coolant system Wheel guard Machine lighting

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 510-1986, CYLINDRICAL GRINDER JOTES SCHAUDT A440X1500 Specifications Maximum longitudinal travel: 1500 mm Grinding diameter: 298 mm External grinding: Yes Internal grinding: Yes Dimensions (L x W x H): 5400 × 2400 × 1600 mm Weight: 4800 kg Operating hours: — Power-on hours: — Condition: Rebuilt Compliant with local standards: — Status: Under power Technical features - Grinding length [mm]: 1500 - Grinding diameter [mm]: 300 - Manual table displacement [mm/rev]: 10 - Table speed range [mm/s]: 0.01–5 - Smallest table stroke [mm]: 3 - Wheelhead swivel [°]: ±90 - Centre sleeve taper [Morse No.]: 4 - Grinding wheel dimensions [mm]: 500 x 63 x 203 - Spindle speed [rpm]: 32–500 - Grinding wheel drive motor power [kW]: 5.5 Chedpjw T Ti Djfx Ailoc - Workpiece drive motor power [kW]: 0.75 - Hydraulic pump motor power [kW]: 1.5 - Grinding attachment drive motor power [kW]: 0.75 - Machine dimensions [mm]: L=5400 / W=2400 / H=1580 / Machine weight [kg]: 4800

Year of construction: 1994, condition: ready for operation (used), Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible. Cedpfxeyf I Hbj Ailshc

Condition: used, Year of construction: 1974, mechanical ja Chedpjy Ty Rijfx Ailec centre distance 2000 mm weight of the machine ca. 7,9 t

Condition: new, Year of construction: 2024, Grinding wheel D x B 455 x 255 mm, workpiece diameter 1 - 60 mm, regulating wheel D x B 255 x 255 mm, regulating wheel speed 10 - 100 rpm, drive power 11 kW, weight approx. 3.7 tons, dimensions approx. 2,700 x 1,700 mm Machine suitable for continuous and plunge grinding, hardened and ground guideways, grinding and regulating spindle with hydrodynamic three-point bearing, central lubrication for slides and feed spindles, regulating wheel drive via DS motor, frequency-controlled, Chjdpfx Asdlgq Usilec hydraulic dressing devices for grinding and regulating wheel, electrical equipment predominantly with Siemens components, electrical control cabinet assembled in Germany, GC 1810-NC with stepper motor and Siemens S7 control for plunge and feed movement. Very economical price/performance ratio.

Condition: ready for operation (used), A Koebau centerless cylindrical grinding machine is offered for the high-precision grinding of cylindrical workpieces. Main motor power: 18.5kW, min./max. grinding diameter: 2mm/100mm, max. workpiece length: approx. 600mm, grinding wheel dimensions X/Y: 600mm/200mm, regulating wheel dimensions X/Y: 300mm/200mm, grinding speed: 45m/s. The machine is equipped with a material feeding system, a singulation unit, a robust base frame and a stepped platform. Overall dimensions X/Y/Z: approx. 2500mm/2100mm/2200mm, weight: approx. 4200kg. An on-site inspection is possible. Cjdpfxszpa R So Ailehc

Condition: used, Year of construction: 1994, Technical details: grinding diameter: 198 mm grinding length: 200 mm z-axis: längs:240 mm x-axis: quer: 340 mm control: Tschudin CNC E 9034B grinding wheel diameter: 500 mm centre height: 100 mm Distance between centres: 300 mm max. workpiece weight between centres: 100 kg interface: RS 232 total power requirement: 16 kVA weight of the machine ca.: 4,5 t space requirement of the machine approx.: L:3,1xT:3,2xH:2,0 m Plunge type grinding automatic technical specifications: - grinding spindle tool intake: 203,2mm Codpfxeu Ng A Ns Ailjhc - grinding spindle not swiveling - workpiece spindle swivelling : +30° to -90° - tailstock collet cone = MK 3 - control: ISO - and graphically programing equipment: - electronical balancing device : AB 100 T.K. - grindig wheel changing aid - grinding disc dressing device (also for grinding forms programable) - cooling system with paper filtering system - Measuring device (out of function, integrated measuring control not connected) *

Condition: ready for operation (used), An external cylindrical grinding machine Kellenberger is available. Distance between centers: 1000mm, center height: 175mm, max. workpiece diameter: 250mm, travel X/Z: 1000mm/220mm, grinding wheel diameter: 500mm, speed: 1530rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1750mm, weight: approx. 3150kg. A viewing on site is possible. Chodsxxzi Ispfx Ailoc

Condition: used, Year of construction: 1979, functionality: fully functional, Grinding wheel diameter: 600 mm Center width: 300 mm Codpjrvybtofx Ailjhc Center height: 180 mm Headstock Counter holder with pressure cylinder

Condition: used, Year of construction: 1999, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control FANUC 18i-TA GENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse Chedpfx Aiey U N Hpolec - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil - Schleifscheibenausrüstung LINKS 500mm - Schleifscheibenausrüstung RECHTS 400mm - Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard) - CNC-Steuerung FANUC 18i-TA - vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N - B-Achse - Kel-Set - hydraulischer Pinolenrückzug - Mikroverstellung am Reitstock - Werkstückspindelstock mit schwenkbarem Unterteil

Condition: used, Year of construction: 2010, grinding length 1025 mm grinding width 520 mm Control SINUMERIK 840 D tool taper HSK-A 63 A - axis ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm Chsdpfx Asvxwineiljc y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared. Without Host-Computer for workpiece- tool-management. without coolant device - was connected to the central supply.

Condition: excellent (used), Kellenberger 1000U cylindrical grinding machine with many accessories available at a low price. This machine is in very good condition and is fully functional. It was purchased as a completely overhauled unit in 2019. Price greatly reduced!!!!! Codowkt Euopfx Ailohc

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Chodpfezz S Awjx Ailoc

Condition: used, Year of construction: 1980, centre distance 900 mm 440 Chedpfxoztfzks Ailjc weight of the machine ca. 3 t

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Center distance: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg unsupported, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed adjustment 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table tilt: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Chjdpfx Aisiv Au Esljc Rough adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW / (5.5 KW = Option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor: 1.5 KW Lubrication motor: 0.1 KW Hydraulic tank: 80 liters Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with infinitely variable drive with a rotating and lockable spindle. New digital feed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse distances, compatible with the old Karstens feed control, with a color Siemens touch panel, scale in X and Z axis, manufacturer HEIDENHAIN. Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna