Used Melting / Reaction Vessel for sale (1,293)

Condition: used, Year of construction: 2013, functionality: fully functional, total height: 2,322 mm, total width: 1,154 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,315 kg, usable tank capacity: 320 l, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, Equipment: type plate available, Due to the closure of our facility, we are offering our fully functional, double mixing system for sale. This system was used until recently in active production. It was primarily used for the manufacture of high-quality epoxy resin systems. Scope of the offer (package sale): 1x Vacuum double planetary mixer (consisting of two identical planetary mixers) 4x Mixing vessels (compatible with the system) 1x Dispensing device Technical data: Manufacturer: Herbst Maschinenbau Model: HRV-S400DP Machine type: Vacuum double planetary mixer Last application: Production of epoxy resin systems Container volume: 320 l depending on the material / 400 l container total volume Drive power / connection values: see TDS in the appendix Condition & History: Used, fully functional, shows typical signs of wear and tear due to age and use. Processing, inspection & dismantling: Possible on short notice after prior arrangement. Availability: Immediately. Dismantling & removal: To be carried out independently by the buyer after prior consultation on site. Additional documents: Operating manual Cjdpezv Rqpefx Albohb If you are interested or have any questions, please do not hesitate to contact us!

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Cjdpfozvddcox Albehb

Condition: good (used), Horizon MKU-54 Mobile Knife Fully functional device, ready for production. Machine from the first owner. Very good condition. Horizon production, Japan Can be connected to any Horizon folding machine. Height adjustment, knife rotation by 180°, speed adjustment, reaction time, counter. Wiring included. Technical parameters: Cedpeztn Hpefx Albohb Max sheet size 540x330mm Min sheet size: 160x100mm Paper weight 35-220 gsm Power supply 230V Weight 250kg

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Chsdpfxjztpxme Albsb

Condition: used, Used Charles Thompson model CT400 Hastelloy C22 Mobile Agitated Nutsche Filter Dryer Manufacturer: Charles Thompson Limited, UK Model: CT400 Type: Mobile agitated Nutsche filter/dryer Year: 2001 Filter diameter: approx. 400 mm / 15.7 in Filtration area: approx. 0.125 m² / 1.35 ft² Product-contact material: Hastelloy C22 External/jacket: 316L stainless steel Shell design: 3 bar/full vacuum Jacket design: 3 bar/full vacuum Design temperature: -30°C to +100°C ASME: Section VIII Div. 1 (1998) + A99 Empty weight: 570 kg / 1,257 lb Chjdpfx Aljzun Hlebeb Agitator: single-blade, approximately 0.75 kW Agitator lift: hydraulic raise/lower Configuration: jacketed vessel on mobile stainless frame/casters.

Condition: ready for operation (used), Year of construction: 2008, workpiece width (max.): 60 mm, total height: 1,550 mm, total width: 1,100 mm, overall weight: 750 kg, product length (max.): 3,200 mm, Edgebander manufactured in 2008. This FELDER G500 features an edge thickness capability of 0.4–5.0 mm, with an optional 8 mm. It accommodates workpiece thicknesses from 8 to 60 mm and offers a feed speed of 11 m/min. The machine includes automatic edge feeding, a Teflon-coated glue roller, and multiple finishing positions. If you are looking to get high-quality edging capabilities, consider the FELDER G500 edgebander we have for sale. Contact us for further details. Machine • FELDER G 500 Edgebanding Machine • Voltage: 400 V • Frequency: 50 Hz • Phase: 3N • Current: 14 A • Power: 5.5 kW • Edge Thickness: 0.4–5.0 mm (optional 8 mm) • Workpiece Thickness: 8–60 mm • Minimum Workpiece Width: 70 mm • Minimum Workpiece Length: 140 mm • Automatic Edge Feeding • Strip Magazine • Coil Diameter: Ø800 mm • Suitable Edge Materials: PVC, ABS, Solid Wood Veneer • Glue Pot Capacity: 2 kg • Glue System: EVA Hot-Melt Granulate • Teflon-Coated Glue Pot • Glue Pot Heating Time: Approx. 12 min • Automatic Glue Temperature Reduction • Pressure Unit with 1 Straight Pressure Roller and 2 Conical Pressure Rollers • End Trimming Unit • Flush & Radius Trimming Unit • Free Finishing Positions: 3 • Chain Conveyor Feed System • Feed Speed: 9 m/min • Extraction Connection: Ø120 mm • Machine Length: 3,200 mm Cedpfx Alozugwvsbehb • Machine Weight: 750 kg Additional Equipment • Scraper Unit (mechanically adjustable for R = 2 mm) • Buffing Unit • 2 Motors • 1,400 rpm • 900 W Technical Specification Feed Speed 11 m/min

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Chedszuyhhjpfx Albob Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Csdpfx Aezuyhnelbjhb

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Codpfjzuyh Uex Albehb Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive Cedpfxjzt Ip Rj Albjhb onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Condition: good (used), Year of construction: 1980, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air receiver for oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver Codpfxjzt I I Te Albshb -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer fine filter New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent Chsdpezpxx Iofx Albsb for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Chodpfx Aszxuz Dslbob

Condition: used, filtration surface (sqm): 12 discharge of vessel: automatic discharge operating pressure (bar): 9 electrical power supply kW: 5 weight [kg.]: 1500 Chodpezx A Tusfx Albsb volume of vessel (ltr): 880

Condition: used, *Filter area: 3 m2 Installed power: 2,45 kW Horizontal disk filter with manual discharge system* This filter uses the horizontal disc system, the only type able to ensure the panel is undamaged even by accidental interruptions in filtration. There is no risk to the panel even in the event of incorrect operation or power cuts. The liquid in the vessel, batching unit and pipes is filtered perfectly at the end of work using a special disc for the purpose. The special filter unit used means that cleaning can be carried out simply using a jet of water and the sped al chute supplied. Manufactured in stainless steel throughout, including the feed pump, pipes, valves and caster-mounted frame. Complete kieselgur batching system with vanable delivery piston pump and stainless steel tank with built-in electric mixer. Chedpfxozx Dd Us Albsb Electric panel complete with every control and safety device required for safe, dependable operation.

Year of construction: 2015, condition: good (used), Rebuilt: 2015 Size: max 510 x 305 x 60 mm min 140 x 100 x 3 mm Cover size: max 640 mm min 203 mm Cjdpfx Alsd Afayjbshb Speed max: 10.000 c/h Equipment gathering machine: 18 feeders 210 controls: miss and double sheet control intermediate elements: spiral race away jogging element perfect binder: 20 clamps clamp pitch 24" milling and roughening station hot melt spine gluing unit hot melt side gluing unit 2 premelters S stream cover feeder S cover nipping and pressing station

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Cjdpfxszrpnlo Albohb Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2021, Overview This SPEIDEL Braumeister 500 is a compact single-vessel electric brewhouse with 500 L (5 hL) batch volume, built in 2021 by Speidel Tank- und Behälterbau GmbH (Ofterdingen, Germany). Mashing, lautering and wort boiling take place in one stainless-steel kettle: the removable malt pipe with perforated base screens and filter cloth holds the grain bed, while the integrated 18.4 kW electric heating elements and wort circulation manage the temperature steps. The brewhouse produced beer at a craft brewery in France until November 2025. It is dismantled, stored and immediately available. Technical data - Manufacturer: SPEIDEL Tank- und Behälterbau GmbH (Ofterdingen, Germany) - Model: Braumeister 500 (Art. no. 46500) - Year of manufacture: 2021 - Machine type: single-vessel electric brewhouse (malt pipe system) - Batch volume: 500 L (5 hL) - Heating power: 18.4 kW (electric) - Power supply: 400 V, 3-phase, 50/60 Hz - Protection class: IP 43 - Application: beer Codoznd Ewspfx Albjhb - Dimensions: approx. 120 x 126 x H 150 cm - Weight: approx. 377 kg Equipment - Removable malt pipe with perforated base screens and filter cloth - Stainless-steel lid - Integrated electric heating elements and wort circulation Condition Used - in beer production until November 2025, last maintenance November 2025. The machine is dismantled and stored. Availability Immediately. Location: France. Handling and truck loading are included (EXW loaded). The machine can be visited on request.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Cedpfxjzku Rpe Albohb Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: ready for operation (used), Year of construction: 2001, Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible. Cedpjy Dgq Defx Albehb

Condition: used, Bottling line for rinsing, filling, capping, and labeling. Manufacturer: VIR MAURI (ITALY), model: 9/24/1 Labeling machine: KRONES – for applying paper labels with hot melt adhesive Capacity: 3,000 bottles per hour Machines are regularly serviced and were in good working order at the time of disassembly. Csdpozymzfjfx Albshb The set includes conveyor belts, as shown in the pictures.

Condition: new, functionality: fully functional, power: 4.3 kW (5.85 HP), gearing type: other, fuel type: gasoline, color: red, empty load weight: 150 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Heat Air Lance HL-1 | Professional Asphalt Heat Tool – Road Repair, Crack Sealing & Surface Preparation Equipment The TICAB Heat Air Lance HL-1 is a high-performance gas-powered heat lance designed for asphalt surface preparation, crack cleaning, preheating joints, weed removal, asphalt softening, and bitumen reheating. A must-have asphalt heat tool for road contractors, paving crews, municipalities, utility companies, and surface maintenance professionals seeking efficient heat applications and improved bonding results. Cedpex U Ayvsfx Albohb Key Features • Heat air lance / asphalt heat tool for asphalt warming, crack prep, and surface softening • Ideal for pre-repair heating, loosening old asphalt material, surface drying, and bitumen melting • High-temperature flame output for consistent heating of asphalt, bitumen, and sealing joints • Gas-powered design for mobile, flexible operation on job sites • Compact, lightweight, and easy to handle for precision work in tight spaces • Durable construction built for heavy-duty road maintenance applications Applications • Weed removal and surface cleaning ahead of maintenance • Asphalt surface preparation before crack sealing or patching • Preheating asphalt joints and edges for improved sealant adhesion • Softening old asphalt, bitumen reheating, and material conditioning • Municipal roads, highways, parking lots, driveways, sidewalks, bike paths, and industrial areas Why Choose TICAB HL-1: HL-1 combines powerful heating performance, mobility, and precision to deliver superior asphalt surface prep and crack sealing readiness. It is designed to improve sealant adhesion, accelerate repair workflows, and enhance overall pavement maintenance quality — making it a trusted choice for contractors and municipal crews focused on efficient, professional road repair results. Contact us now for price, delivery options, and full technical specifications. Boost your asphalt prep and repair workflow today!

Year of construction: 2012, condition: used, Empty weight: 9.250 kg Width: 18 cm Serial number: GS0000985 CP2000 Anicolor Damping Complies with the CE standard: yes Maximum sheet size: 370 × 520 mm Maximum print size: approximately 360 × 520 mm. Maximum production speed: approximately 15,000 sheets per hour. Paper thickness: approx. 0.03–0.40 mm Dimensions: Chedszuw Huepfx Albeb Length: 5.5 meters Width: 1.85 meters Height: 1.62 meters Weight: approx. 9,250 kg Includes operator console Note: The machine was delivered with a maintenance contract Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Heidelberg Stahl Stahlfolder TH 94 4/4 Bag-Folding Machine Line (Lot Nos. 106 & 108) Cjdpfx Aljzuw Hhobohb Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Chsdpfxsyln D Te Albob