Perfect binder

Müller Martini Normbinder 3001 NB 2 S

Year of construction: 1992, condition: good (used), Size: max 510 x 305 x 60 mm min 140 x 100 x 3 mm Cover size: max 640 mm min 203 mm Speed: max 10.000 c/h Equipment: gathering machine - 15 feeders 256 Hfedeh Atbcjpfx Ag Dor perfect binder - 20 clamps - milling and roughening station - hot melt spine gluing unit - hot melt side gluing unit - premelter - S stream cover feeder - cover nipping and pressing station - lay down device optionales Equipment: --not included-- - PUR Leimbecken

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg Hfsdpfx Aeh Nrh Ueg Der

Year of construction: 2023, condition: as good as new (ex-display), Notching machine Boschert LB12/4 Machine colour blue Ral 5017 Cutting angle 90 Cutting capacity 4 mm St42 3 mm stainless steel Hfsdefgq Uispfx Ag Djr Connected load 4kW Weight 760 kg Machine equipped with 2 stops with movable stop bar stop bar 300 mm inner stop for cutting strips up to 225 mm plexi protection CE and new machine guarantee

Condition: good (used), Size max 510 x 305 x 60 mm Size min 140 x 100 x 3 mm Cover size max 642 mm Cover size min 203 mm Hfjdpfjd R Ecpox Ag Der Speed max 12.000 c/h Equipment gathering machine • 18 stations • 18 feeders 3661-210 SF intermediate elements • spiral race away • jogging element perfect binder • 25 clamps • clamp pitch 24" • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • SF stream cover feeder • SF cover nipping and pressing station • lay down device

Condition: excellent (used), Year of construction: 2006, Collating machine with a sewing, folding and trimming module manufactured by the renowned C.P. Bourg company. Year of production 2006 in the following configuration: Collating Tower BST D+ The collator is a very versatile device for collating many types of paper in a wide range of formats. The sheets are fed by suction belts rather than rollers, which eliminates the possibility of leaving marks on the paper. The suction and blowing force is adjustable without the need to interrupt the operation of the device. The machine is controlled from a touch panel. Specifications: Format range: min. 115 x 200 mm; max. 350 x 520 mm Speed range: 9,000 cycles/hour (10 x 80 g/m² A4 sheets fed per shaker) 5,500 cycles/hour - pick-up per stacker Paper weight: 50 – 250 g/m² Pile height: up to 5 cm Machine dimensions - main tower: 93 x 73 x 200 cm (length x width x height) Weight: 360 kg Hfodorq Havjpfx Ag Der The SBM 4 unit has a modular design and consists of the following parts: AGR T stitching machine • two Hohner sewing heads • quick adjustment of the position of the heads • block or saddle stitching • Regular staples • Wheels for quick sliding • Work in line or as a separate unit Specifications: Format range: min. 117 x 200 mm, max. 320 x 450 mm (block sewing) max. 320 x 500 mm (saddle stitching) Paper weight: 60 - 250 g/m² Maximum thickness of the stitched fold: 6,35 mm Capacity: 3,000 trains per hour Dimensions: 55 cm x 60 cm x 110 cm Weight: 114 kg PA T Folding Machine • Automatic synchronization with collating tower and stitching machine speeds • In-line or off-line operation in combination with an AGR T stitcher Specifications: Format range: min. 117 x 200 mm, max. 320 x 500 mm Maximum quantity of folded material: 22 sheets 80 g/m² Capacity: 3,000 products per hour Dimensions: 60 cm x 60 cm x 73 cm Weight: 134 kg TR T Knife Automatic synchronization with colalting tower speeds, stitchers and folding machines, waste container. Specifications: Cropped brochure size range: min. 117 x 100 mm, max. 320 x 250 mm Paper weight: 60 - 250 g/m² Maximum trimmed quantity: 44 sheets 80 g/m² Capacity: 3,000 trains per hour Dimensions: 150 cm x 60 cm x 82 cm Weight: 170 kg SBM Equipment Counter of ready-made sets. A function that throws assemblies with an error without interrupting the operation. Two-knife cutting system with exceptional durability. Reinforced 4-roller folding system. Make adjustments to settings without interrupting your working.

Condition: used, Year of construction: 1991, machine/vehicle number: 6172025, Palettenheber mit Wanne / Pile Hoists - Stack Lift Polar L-1000-W-3Baujahr / Year 1991 - Serial-No. 6172025 Format / Size max. 1100 x 750mm Hebekapazität / Loading capacity max. 1000KG Hubhöhe / Lifting height max. 1400mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hfsdjn Aw Ugspfx Ag Dsr

Condition: used, machine/vehicle number: 932639 A690, Format trimmed 510x320 mm min 158x110 mm Hodpfxobg Hnhs Ag Defr Format trimmed max 500x315 mm min 148x105 mm Power max 14000 c/h min 2000 mm

Condition: reconditioned (used), Year of construction: 2016, Equipment: 4 in one shovel, Casemaker "BookJet Edition" - processing Hotmelt Hsdsv Adazspfx Ag Defr - board centre strip magazine - board centre strip cutting device

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Hsdpfx Agjpgwaue Dsfr Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories

Year of construction: 2024, condition: new, Slitting machine with rotary die-cutting function is suitable for blank adhesive labels. It has the function of automatic meter counting, label quantity counting, and pre-set auto stopping. It has characteristics of compact structure, fast speed, high efficient, easy operation and steady running. Features: 1. Die-cutting and slitting can be finished in one process. 2. Main motor with Schneider (France) frequency converter to control step-less speed. 3. The machine adopts Japanese and Taiwan pneumatic technique. 4. EPC with two photoelectric sensors for web guiding, guarantee driving in high precision. 5. The machine has magnetic powder clutches for unwinding and rewinding tension control. Specifications: Max. web width - 320 mm Max. unwinding diameter - 600 mm Unwinding tension control - Magnetic powder brake 100NM*1 Web guiding system - Photoelectric eye sensor EPC*2 Die-cutting speed - ≤100 m/min Die-cutting repeat length - 80T-150T (if cutting rule is short, 60T is ok) Slitting technique - Circular knife (8 pieces) Slitting speed - ≤120 m/min Min. slitting width - 18 mm Trim disposal - Trim reject fan (0.75kw) Max. rewinding diameter - 480 mm Rewinding tension control - Magnetic powder clutch 25 NM*2 Rewinding inner core diameter - 76 mm (3”) Power supply - 380V/3ph Main motor power - 2.2 kw Hedpfx Aog Rb R Eeg Dsfr Total power - 2.5 kw Weight - 1100 kg Overall dimension - 1600x900x1500 mm