Used Kraussmaffei Km 250-1900 C1 for sale (21,310)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 74,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 75 mm, displacement volume: 1,237 cm³, injection pressure: 1,635 bar, Clamping unit: Clamping force 3000 kN Mould opening force, max. 169 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 75 mm Ls/D ratio 18,7 Injection pressure 1635 bar Stroke volume 1237 ccm Shot weight (PS) 1126 gr. Injection rate 442 ccm/s Screw speed 220 1/min Plasticising rate max. 87 g/s Nozzle pressure 82 kN Kdodszfarhjpfx Abfjn Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 29 kW Adjustable barrel heating zones 6 Oil Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,50 x 2,20 x 2,40 m Total machine weight 14500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei robot LR100 X: 550 mm, Servo Y: 1200 mm, Servo Z: 2000 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x hydr. core pull - 1 x Air valve - Accumulator - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 800-5000 MC injection moulding machine Kdsdpfozd Ta Nox Abfjn Year of manufacture: 2001 Equipment: robot Technical details: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen feed force (opening): 98 kN Moving platen force (closing): 92 kN Platen size (W × H): 1,610 × 1,530 mm Tie-bar spacing (W × H): 1,120 × 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum daylight: 2,000 mm Hydraulic ejector stroke: 250 mm Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g General machine data Dimensions (L × W × H): 10,500 × 2,860 × 2,890 mm Weight: 43,000 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 72,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 100 mm, displacement volume: 2,827 cm³, Clamping unit: Clamping force 4200 kN Mould opening force, max. 250 kN Travel force movable platen opening 124 kN Travel force movable platen closing 102 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 800 x 800 mm Mould opening stroke 1020 mm Mould height min 380 mm Max. daylight 1400 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1490 bar Stroke volume 2827 ccm Shot weight (PS) 2573 gr. Injection rate 746 ccm/s Screw speed 195 1/min Plasticising rate max. 165 g/s Nozzle pressure 129 kN Ksdpfxozd Smbj Abfodn Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,60 x 2,50 m Total machine weight 23500 kg Max. mould weight 6700 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR 150 X: 900 mm, Servo Y: 900/900 mm, Servo Z: 2500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve on movable plate - 1 x core pull on movable plate - 6 x Hotunner controller - Accumulator - Robot inteface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, Clamping unit: Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 153 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Kdsdpfx Aszd Er Rjbfjn Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 121 1/min Plasticising rate max. 144 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 57 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 45000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR300 X: 1200 mm, Servo Y: 1000/1000 mm, Servo Z: 3500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve - 2 x core pulls on movable plate - Accumulator - 8 x hot runner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm Kdodpfsyhbq Ejx Abfsn • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, Clamping force 500 kN Mould opening force, max. 39 kN Travel force movable platen opening 22 kN Travel force movable platen closing 17 kN Size of mould platens (h x v) 600 x 600 mm Distance between tie bars (h x v) 370 x 370 mm Mould opening stroke 400 mm Mould height min 200 mm Max. daylight 600 mm Hydraulic ejector - stroke 100 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Shot weight (PS) 54 gr. Injection rate 59 ccm/s Screw speed 365 1/min Plasticising rate max. 8,5 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 11 kW Installed heating capacity 8 kW Adjustable barrel heating zones 5 Reservoir capacity 180 ltr. Dimensions and weights: Dimensions of the machine ca. 3,50 x 1,40 x 2,00 m Total machine weight 3000 kg Accessories: - Anti vibration pads - 6-zones water distributer - Krauss Maffei Robot SPX10 Additional Options: Ksdpfx Abezdrcisfedn - 1 x hydr. core pull on movable plate - 1 x airvalve - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 51005604, screw diameter: 60 mm, Equipment: documentation/manual, Krauss Maffei KMD 60 K/P - Year of manufacture 2008 - Conical counter-rotating plasticizing system Kodozclayspfx Abfsdn - Capacity 55-180 kg/h - Screw diameter 60 mm The extruder is in very good technical condition. It has previously used with PVC dry blend in the production of window profiles. The plasticizing system does not require replacement or regeneration.

Condition: used, Year of construction: 1998, operating hours: 101,215 h, machine/vehicle number: 23J01415, clamping force: 23,000 kN, injection weight: 6,100 g, total length: 4,500 mm, total height: 3,800 mm, overall weight: 205,000 kg, # Sales Description Two high-performance injection molding machines from the renowned manufacturer KraussMaffei are available for sale. These are KM 2300-14700 MC models, specifically designed for the production of large-volume plastic parts and industrial series manufacturing. Each machine offers a clamping force of 23,000 kN, equipped with a screw diameter of 105 mm and a maximum shot weight of 6,100 g—ideal for applications involving large components and high material throughput. Kodpfeyt Hidex Abfedn Both units are provided with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also part of the package. The machines originate from the years 1997 and 1998 and have been operated in an industrial production setting. Technical Overview: Machine 1 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) - Year of manufacture: 1998 - Operating hours: approx. 101,215 h Machine 2 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) - Year of manufacture: 1997 - Operating hours: approx. 99,030 h Shared technical data: - Clamping force: 23,000 kN - Screw diameter: 105 mm - Max. shot weight: 6,100 g - Machine weight: approx. 205,000 kg - Machine dimensions: - Depth: approx. 4,500 mm - Height: approx. 3,800 mm These machines deliver a reliable and field-proven solution for industrial plastics processing, making them especially attractive to companies seeking large-format injection molding capability.

Condition: excellent (used), Year of construction: 2016, clamping force: 13,000 kN, KRAUSS MAFFEI KM 1300-8100 MX General Information 1. Manufacturer: KraussMaffei 2. Model: KM 1300-8100 MX 3. Year of Manufacture: 2016 4. Machine Type: Horizontal Injection Moulding Machine 5. Drive System: Hydraulic Clamping Unit 1. Clamping Force: 1,300 t (13,000 kN) 2. Distance Between Tie Bars (H × V): 1,570 × 1,270 mm 3. Platen Dimensions: 2,210 × 1,910 mm 4. Mould Height (Min. / Max.): 700 / 1,400 mm 5. Opening Stroke: 2,350 mm 6. Maximum Daylight Opening: 3,050 mm 7. Centering Ring Diameter: 315 mm Injection Unit (8100 MX) 1. Screw Diameter: 105 mm 2. Shot Volume: 4,546 cm³ 3. Maximum Injection Pressure: 1,778 bar Machine Equipment 1. Hydraulic Core Pulls: 4 + 4 2. Heating Zones for Mould: 32 3. Cooling Circuits: 8 + 8 4. Electrical Cascade Valve Outputs: 12 5. Cooling Connections: 12 + 12 6. Hydraulic Hot Runner Circuit: 1 7. Interface: EUROMAP 67 Key Advantages Kdedpfx Abjy Emursfjn 1. Large platen size: 2,210 × 1,910 mm 2. Wide tie-bar spacing: 1,570 × 1,270 mm 3. High opening stroke: 2,350 mm 4. Suitable for large automotive, logistics, technical and industrial moulds 5. Extensive mould equipment (32 heating zones, 16 cooling circuits, cascade control)

Condition: new, Year of construction: 2025, Clamping force: 1600 t Screw diameter: 70 mm Shot weight: 1490 g Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 1232 cm3 Type: Horizontal Drive: Hydraulic Kdsdpfey Umpujx Abfsn

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm Kdjdpfx Aey Apdqebfjn \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g EQUIPMENT Two-component system Kedsy Exdljpfx Abfedn Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,250 kN, screw diameter: 45 mm, For sale: injection moulding machine by KraussMaffei, model KM 125-700C2. The machine is fully functional and was in production until recently. Technical specifications: Kdedpfxsx Ituqe Abfjn Year of manufacture: 2000 Operating hours: 69,000 h Clamping force: 125 t Screw diameter: 45 mm Needle shut-off: Pneumatic Core pull: 2*Hydraulic Internal pressure sensor

Condition: ready for operation (used), Year of construction: 2003, clamping force: 1,250 kN, total width: 1,500 mm, total height: 2,100 mm, overall weight: 6,000 kg, product length (max.): 4,400 mm, Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details. • Opening force: 35 / 28 kN Kedoylkxaepfx Abfedn • Tie bar spacing (H × V): 470 × 470 mm • Mould installation height min.: 300 mm • Opening stroke: 900 mm • Ejector stroke: 150 mm • Ejector force: 22 / 10 kN • Injection unit: SP 520 • Screw diameter options: 35 / 40 / 45 mm • Shot volume: approx. 156 / 204 / 258 cm³ • Injection pressure: up to approx. 1800+ bar (depending on screw) • Screw speed: approx. 391 / 489 rpm • Plasticizing rate (PS): approx. 22–41 g/s (depending on screw) • Pump motor power: 18.5 kW • Installed heating capacity: 13 kW • Oil filling quantity: 345 l • Max. mould weight: 1485 kg • Power supply: 3 phases • Operating voltage: 400 V • Frequency: 50 Hz Additional equipment • Cooler (included)

Year of construction: 2013, condition: good (used), Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Kjdpfx Ajyxn U Tjbfjdn Year of construction: 2013 Screw diameter: 38 mm L/D ratio: 30

Condition: good (used), Year of construction: 2007, operating hours: 47,963 h, functionality: fully functional, clamping force: 200 kN, For sale is an injection molding machine of the brand KraussMaffei and the type KM 200-220/220 CZ Multinject The machine is in a fully functional and well-maintained condition Technical data Year of construction: 2007 Clamping force: 200 t Aggregates: 2 Automatic hours: 47 963 Dimensions: 5200*2200*2700 mm Weight: 11,500 kg Kdedpfx Abervimbefjn Further technical data will follow shortly Offer refers only to the machine, the peripherals shown in the pictures are not part of the offer On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2007, operating hours: 27,000 h, clamping force: 6,500 kN, KraussMaffei KM650-3500 C2 injection molding machine for sale. The machine is in very good condition. It has only been operated in single-shift production and used exclusively for small batch and sample production. A new hydraulic pump was recently installed (approx. 300 operating hours ago). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and guideways are undamaged and in like-new condition - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic cylinder - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Inspection under power is possible. Kedpfx Abjyn Sc Eefjdn Other accessories such as Motan dryer, chiller unit, and much more available upon request. The machine can be dismantled and loaded by us upon agreement. We look forward to your inquiry.

Condition: good (used), Year of construction: 2002, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM575-1900C2 Baujahr: 2002 Schließkraft: 575 Tonnen Kjdpfx Absyak Htsfsdn Holmabstand 1000 x 1097 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.097 cm³ Spritzteilgewicht: 998 g/PS Steuerung: MC4 Ausstattung: 5 St. Kernzug Roboter, Hersteller: Reis, Baujahr: 2015 24- Fach Heisszonenkanalregelung Förderband Schutzzaun

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM420-4300CX Baujahr: 2012 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 80 mm Max. Hubvolumen: 1.810 cm³ Spritzteilgewicht: 1.647 g/PS Steuerung: MC6 Kedpfx Aeyak Ecjbfodn Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900CX Baujahr: 2011 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 769 cm³ Spritzteilgewicht: 692 g/PS Kdjdjx Tbfuspfx Abfjn Steuerung: MC5 Ausstattung: 3 St. Kernzug Djbr Rvoxyrc Isf Nysul Schnittstelle Roboter 45- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 51.000 Betriebsstunden

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Screws ø 90-36D, 45-30D, 45-36D Compact design, one shared control cabinet, approx. 800 kg/h Kdsdpoyilykjfx Abfjn

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping Unit: Clamping force: 4,200 kN Tie bar spacing (H x V): 900 x 800 mm Platen dimensions (H x V): 1,400 x 1,250 mm Min. mould height: 780 mm Max. daylight between platens: 1,400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6,700 kg Injection Unit: Screw diameter: 80 mm Injection pressure: 1,856 bar Shot volume: 1,608 cm³ Shot weight (PS): 1,464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional Equipment: 2 x hydraulic nozzle controls (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Masterbatch dosing unit control 14 GK zones Kdjdpfx Asydbbvjbfjn Electrical and General Data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1,075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Condition: used, Year of construction: 2006, operating hours: 60,000 h, Injection molding machine Krauss Maffei 50-180 CX Ksdpfjv Tmzpox Abfedn Year 2006 screw di 30

Condition: used, mileage: 487,575 km, power: 110 kW (149.56 HP), first registration: 02/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,600 mm, total width: 2,130 mm, permissible axle load (axle 1): 2,100 kg, permissible axle load (axle 2): 2,800 kg, loading space length: 4,120 mm, loading space width: 2,070 mm, loading space height: 1,300 mm, Year of construction: 2019, Equipment: ABS, air conditioning, = Additional options and accessories = - Radio CD player = More information = Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Max. front axle load: 2100 kg Max. rear axle load: 2800 kg Weights Empty weight: 2.631 kg Kodpfx Ajzfn N Iebfjdn Carrying capacity: 969 kg GVW: 3.500 kg Max. towing weight: 7.000 kg Maintenance APK (MOT): tested until 02/2027 Identification Registration number: V-088-VZ

Condition: excellent (used), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet Description: For sale is an industrial tempering oven / heating cabinet manufactured by Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for processing of large or multiple components simultaneously. The oven is controlled via a JUMO IMAGO 500 system, enabling precise temperature control as well as automated programs. Typical applications: - Industrial manufacturing - Plastics and metals processing - Component drying - Heat treatment - Testing technology / materials testing - Laboratory and research applications The system is built with heavy-duty industrial quality and designed for continuous operation. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety classes: TB Class 1 TWB Class 2 Chamber: Usable volume: 11.25 m³ Internal dimensions: Width 2000 mm x Height 2500 mm x Depth 2250 mm External dimensions: Width 2900 mm x Height 3530 mm x Depth 2700 mm Load capacity: Interior load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Nominal power: 54 kW Connected load: 58 kW Additional data: Kdodpfxsytrzfj Abfon Minimum exhaust air volume flow: 600 m³/h Reduced exhaust air volume flow: 150 m³/h Purge time: 465 s Total steam volume: 14.9 m³ Sound pressure level: < 70 dB(A) Safety temperature limiter cutoff temperature: 280 °C Adjustable temperature limiter: 270 °C Weight: 1850 kg Condition: Used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.