Used Idra Neo 1000 for sale (8,348)

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year: 2001, Serial No.: 7.5592, Press force: 1,000 t, Die change table 2,500 x 2,100 mm, Ram surface 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Table draw cushion force: 30–200 t, Draw cushion stroke: 300 mm, Press control with Siemens Simatic OP 37 HMI, Control and switch cabinets. +++ Attention: Machine is part of an online auction! +++ Gbjdpfxjx Ry Ntj An Rol

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Gjdpfx Aneud A Hks Rjbl Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Sweeping width - main brush (mm) 600 Width with 1 side brush (mm) 800 Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Condition: good (used), BHG Hermle CNC milling machine Type: UWF 1000 Control: Heidenhain TNC 355 Godpfx Ajqwgzbjn Rebl X-path: 700 mm Y-path: 550 mm Z-path: 500 mm Bed: 490 x 1000 mm Spindle: ISO 40 Speed: 3150 rpm Year of manufacture: 1988 Including documentation and parameters Dimensions: 230x200x220 cm LxWxH Weight: approx. 4000 KG

Condition: like new (used), Year of construction: 2009, 🔥 FOR SALE: 2x Fröling Turbomat 500 kW Cascade System – Total Output 1000 kW 🔥 ✔ 2x Fröling Turbomat 500 kW ✔ Total output: 1000 kW ✔ Fully automatic woodchip heating system ✔ Lambda control + negative pressure regulation ✔ Moving grate feed ✔ Automatic cleaning and de-ashing ✔ 4-pass heat exchanger with automatic WOS cleaning system ✔ Integrated multi-cyclone dust separator ✔ Water-cooled feed channel ✔ Heavy-duty industrial design Suitable for: - Woodchips - Pellets - Sawdust - Biomass fuels 📦 Included in the price: - 2x boilers - 2x screw conveyors Gbjdpfx Anoy Rfa Ro Rel - 2x pumps - 2x return flow mixing valves - 2x control panels / controllers - Return flow lift up to shut-off valve - Ash screw conveyors ❌ Not included: - Moving floor discharge - Ash container 🔧 Dismantling: - 16.06 – 17.06.2026 - Dismantling included in the price - Crane loading directly via roof opening 🚛 Loading: - 18.06.2026 - Crane firmly booked from 07:00 – 10:00 - Transport and truck logistics to be organised by the buyer ⚠ The buyer's truck must be on site before crane works begin. Additional crane hours due to delayed truck arrival must be paid directly by the buyer on site. Márton Pauker Top Heating Systems BEN & JAK KFT 📞 🌐

Condition: used, Year of construction: 1983, operating hours: 6,270 h, power: 70 kW (95.17 HP), Equipment: all wheel drive, cabin, front linkage, * Manual transmission * Front and rear hydraulics & PTO shafts * Front and rear lift arms * Cab with 2 seats * Drawbar coupling * First registration: 17/08/1983 * Operating hours: 6,270 h ----* Front tire size: 520/75R26 * Rear tire size: 520/75R26 * Technical total weight: 7,000 kg * Curb weight: 4,280 kg * Overall length: 4,480 mm ----Vehicle number: 12039----Subject to errors and prior sale----We are happy to assist you with all formalities involved in purchasing a vehicle. Godpfx Anjy Rdgpo Robl Simply let us know your requirements and suggestions, and we will take care of them. Among other services, we can offer you the following for an additional fee:----* Trade-in of your old vehicle * TÜV/roadworthiness inspection * Complete export processing * Financing arrangement * Application for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, Technical data: Briquette diameter: 50 mm Briquette length: 50 mm Hopper diameter: 1000 mm Hopper height: 920+1000 mm Throughput: approx. 50 kg/h Power supply: 380 V Gbodjy N Taispfx An Rol Motor power: 4 kW Emergency stop switch Overall dimensions: Length: 1600 mm Width: 1100 mm Height: 1500+1000 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Gbsdpfx Aoygk Eijn Rol

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw Gedsipx Aispfx An Robl 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL

Condition: ready for operation (used), Drilling machine Brand: Ayen Model: DB 1000 B23 Machine no.: 681642 Pneumatically controlled drilling machine. The drill box can be replaced with other drills. Gbedex Aplxepfx An Rsl Machine size: 120x80x205 cm (LxWxH) Weight: 275 kg Stock no.: 2001012 Technical data 23 spindles cc 32 mm Max opening: 820 mm Working width: 720 mm Drilling depth: Horizontal 120 mm, vertical 80 mm Mitre 90º-45º Motor: 2.2 kW, 50 Hz, 380 V, 2800 RPM, 3-phase

Condition: new, Travel X / Y / Z axes: 1020 / 550 / 635 mm Table size: 1200 x 550 mm Spindle speed: 12,000 rpm Spindle interface: 40 BBT Control: Fanuc 0i MF Plus Dimensions: 480 x 230 x 255 cm Gsdey Inuljpfx An Rjbl Weight: 8,000 kg Equipment: Tool stations: 30 Coolant through spindle 20 bar Air through spindle (must be ordered with CTS) Chip conveyor Chip container Work area chip flushing

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Gjdey N Aa Eepfx An Rjbl Offered at EUR 2,000 – plus VAT, ex location

Condition: used, Multiple knife mill / granulator with rotor with 16 knives Gjdpfx Anoy Icdze Robl 6 stator knives Drive 90 kW With equipment

Condition: excellent (used), Year of construction: 2003, GRASSAIR SFX 1000 screw compressor (ATLAS COPCO screw module) on a 500L tank after service Technical data: capacity 1.00 m3/min (1000 L/min); 7.5 KW engine; max. pressure 10 bar; Gedpfxewc Shxj An Robl year 2003 compressor fully operational; net price: PLN 9,500 gross price: PLN 11,685

Condition: excellent (used), CTS Climate Test Chamber C-70/1000-S Gjdjy Iam Hopfx An Rjbl Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Type: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Cooling System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Programmable operation Digital setpoint/actual value display Viewing window in door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Cable ports on the sides Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation size (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Error messages and digital channels Site plan Quick guide Humidity diagram Scope of Delivery CTS Climate Test Chamber C-70/1000-S Documentation as available Scope of delivery as shown Optional Pre-delivery Service Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as per photos. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Gjdpfx Aneyniz Ej Robl Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: new, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder (factory installation – price: €672.00 net, not included in price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 – 2000 rpm Longitudinal feeds: (27) 0.06 – 2.78 mm/rev Cross feeds: (22) 0.01 – 0.72 mm/rev Metric threads: (36) 0.8 – 14 mm Inch threads: (30) 2 – 28 TPI Quill diameter: 45 mm Quill travel: 100 mm Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Approx. weight: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, DIN 55029 compliant • Fixed steady rest – max. through diameter 90 mm • Travelling steady rest – max. through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Removable chip tray • 320 mm face plate • Four-way tool post • Guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine lamp • Reducer bush Gjdpfx Asgd Iagon Rebl • Change gears • 2 live centres • Foot pedal with brake function, CE compliant • Motor with magnetic brake as per CE regulations / operating tool set Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder, factory installation (price: €672.00 net, not included in basic price)

Condition: used, Year of construction: 1996, functionality: fully functional, Manufacturer: REINBOLD (Germany) Gjdpjy Nw Idsfx An Rjbl Model: RHZR 1000 Type: Wood Shredder Motor: 18.5 KW Weight: 2470 kg Size: 3140 x 2265 x H 2310mm Only 300 working hours, good condition, connected, can be inspected. Rotor 250 mm with 26 knives Screw conveyor to eject chopped scraps

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago Gjdpfxjwwl I Ie An Rsbl

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Gjdpoy H Igrefx An Robl Video of machine in operation available

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Equipment Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature shock chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Used in industry, automotive, research, and quality assurance. System Description • 2 separate temperature chambers (hot/cold) • Automatic horizontal transfer of test basket • Rapid switch operation for temperature shock testing Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Gbsdpfsy H Igfjx An Rel Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current draw: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water consumption: max. 3.2 m³/h Cooling water return: zero pressure Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight approx. 2800 kg Equipment Features • Horizontal basket movement • C-rails in test chamber • Large test basket (>1000 mm) • Observation window • Interior lighting • SE-604 controller • Program operation and data logging • RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rH Scope of Delivery RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Scope of delivery as shown Optional service before delivery: • Function test • Refrigerant service • Leak test • Trial run with protocol Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Gbodpey H Dq Hefx An Rjl Misc. accessories MARCELS MASCHINEN AG

Condition: ready for operation (used), Year of construction: 2003, A CNC coordinate measuring machine Zeiss calibrated at the end of 2025 is available. Measuring dimensions X/Y/Z: 1200mm/1800mm/1000mm, max. workpiece weight: 2000kg, length measurement deviation: 2µm/L300, resolution: 0.2µm, measuring rate: 200/s, max. stylus length: 800mm, max. probe mass: 600g, measuring head: VAST Gold Scanning. Machine dimensions X/Y/Z: approx. 3000mm/2050mm/3550mm, weight: approx. 6000kg. Without grid plate, probe rack, software license and computer. Documentation available. An on-site inspection is possible. Gbedpfoy Nm Ugox An Rol

Condition: used, Year of construction: 2017, AWEA AF 1000 VERTICAL MACHINING CENTRE Year: 2017 Manufacturer: AWEA MECHANTRONIC CO LTD Model: AF/AV Series CNC: FANUC Series Oi-MF TECHNICAL SPECIFICATIONS X axis travel: 1,020 mm Y axis travel: 550 mm Z axis travel: 635 mm Table dimensions: 1,200 x 550 mm T-slot size: 5 x 18 mm Table to floor distance: 915 mm Maximum table load: 500 kg X/Y axis rapid traverse: 36,000 mm/min Z axis rapid traverse: 30,000 mm/min Feedrate: 10,000 mm/min Distance spindle nose to table surface: 100–735 mm Spindle center to column distance: 640 mm Axis motor power (X; Y; Z): 3.0/4.0 kW/HP; 3.0 4.0; 4.0/5.4 Spindle motor (continuous/30 min): 5.5/7.5 kW Spindle speed: 12,000 rpm Godpfx Ansy Nknqj Rebl Spindle taper: ISO 40 ATC type: With exchange arm Tool magazine capacity: 24 positions Maximum tool diameter (adjacent): 80/150 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg Power requirement: 30 kVA Machine weight: 7,000 kg Machine dimensions: 3,590 x 2,140 x 2,630 mm MACHINE EQUIPMENT 4th axis rotary table (continuous) Screw-type chip conveyor Remote pendant (Remote Flyer) Machine supplied complete with manuals and CE certification All technical specifications are for reference only and may be changed without prior notice. They are not to be considered binding.

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 31.211.014, center height: 225 mm, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 500 mm, workpiece diameter between centers: 500 mm, Kellenberger UR 175x1000 CNC Kelco 70, fully functional Upgrade from 175 to 225 Machine no. 31.211.014 Year of manufacture: 1987 Prepared for internal grinding device Ball screw X-axis replaced in 2017 Axis card Z-axis replaced in 2021 Tailstock bearing renewed in 2017 Monitor renewed in 2023 Accessories: 1x grinding wheel flange left 1x grinding wheel flange right 1x centre support 1x workpiece magnet 1x paper band filter Further accessories on request No warranty, guarantee or return Gbjdeyyur Ispfx An Rol Available immediately, ex location Transport can be organised if required

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, Machine used for shot blasting of steel components; additionally, the machine is equipped with a wet dust collector, which enables blasting of aluminium parts (additional installation available at extra cost). -Year of manufacture: 2024 -Machine operating time: 2,000 hours -Mesh conveyor made of manganese, width 1,000 mm -Adjustable conveyor belt speed -4 turbines, 11 kW each, type Rutten Gamma 330 HD -Variable turbine speed regulation -Hot Spot chamber made of manganese and tool steel -Automatic parts detection -Automatic abrasive flow control -Automatic abrasive refill -Automatic parts blow-off -Dedusting system: Rosler BF 40/40 -The machine allows the use of GH-grade extremely hard, sharp-edged blasting media Gbsdpfx Answvgbgo Rjl -Turbine blades made of carbide guarantee 30,000 working hours -Turbine housings made of carbide offer even greater protection against machine body wear