Used Hoeflon Loader for sale (3,730)

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Hjdsz Dmn Repfx Af Sou Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall width of the vehicle: 2990 mm Platform length: 15000 mm Telescopic: Yes / Length of extension 1: 8000 mm Saddle height: 1415 mm Saddle load: 30,000 kg Axle load: 96,000 kg Tare weight: 36,200 kg Maximum permissible load: 126,000 kg Payload: 89,800 kg Hodpfx Afoz Ed D Ee Ssu

Condition: excellent (used), gearing type: automatic, fuel type: diesel, color: other, first registration: 06/2020, Year of construction: 2020, operating hours: 8,268 h, Condition CE type: CE = More information = Technical condition: very good Visual appearance: very good Price: On request Registration number: T-23-DZR = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Hodpjz Avx Sefx Af Sju Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), power: 85 kW (115.57 HP), fuel type: diesel, color: other, lifting height: 3,850 mm, Year of construction: 2018, operating hours: 6,989 h, Equipment: air conditioning, GVW: 9.500 kg Dimensions (LxBxH): 722 x 226 x 311 cm Chassis type: articulated Steering: articulated Engine type: Caterpillar C4.4 ACERT Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Central lubrication - Hydraulic quick coupler - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Hedpjz Dqzzsfx Af Seu Country of production: Engeland Condition CE type: CE Hydraulic quick coupler, central lubrication, 20 km/h

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 4,520 h, load capacity: 6,000 kg, lifting height: 4,040 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 27 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 355 / 65 - 15, overall weight: 15,300 kg, empty load weight: 10,300 kg, total height: 2,650 mm, total length: 3,900 mm, total width: 2,100 mm, color: green, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, 🔥 COMBILIFT C6000SL | DUPLEX 4040 MM | FORK POSITIONER | FULL CABIN | READY TO WORK 🔥 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🚛 TRANSPORT THROUGHOUT EUROPE AND WORLDWIDE If you are looking for a forklift that will start generating profits from day one instead of incurring service costs, this offer is for you. We offer a proven and professionally prepared COMBILIFT C6000SL sideloader. The machine has undergone a complete technical inspection, full service, and thorough testing. It is ready for immediate operation in a production facility, warehouse, or logistics center. ⭐ KEY ADVANTAGES ✔ Full service completed before sale ✔ Start-up warranty ✔ Brand new super elastic tires ✔ Very good technical and visual condition ✔ Ready to work without additional investment ✔ Live online presentation available ✔ Direct delivery to your company available 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🔹 Model: C6000SL 📅 Year: 2011 🏋️ Lifting capacity: 6000 kg ⛽ Engine: DIESEL ⏱️ Operating hours: 4520 h ⬆️ Mast: DUPLEX 📏 Lifting height: 4040 mm ↔️ Fork positioner: 1360 mm 🔱 Fork length: 1200 mm 🚪 Cabin: Full and heated ⚖️ Operating weight: 10300 kg 📐 DIMENSIONS ↕️ Height: 2650 mm with air conditioning ↔️ Length: 3900 mm ↔️ Width: 2100 mm 📏 Overall construction height: 3000 mm 🛞 TIRES Front: 27 x 10 - 12 SE super elastic Rear: 355 / 65 - 15 SE super elastic Condition: 100 percent NEW ⚙️ EQUIPMENT ✔ Fork positioner ✔ Full heated cabin ✔ Working lights ✔ Warning beacon ✔ Windscreen wipers ✔ Opening windows ✔ Third and fourth hydraulic valve ✔ CE certificate ✔ Operating manual 🏗️ IDEAL FOR 🪵 Timber industry 🏭 Steel mills and steel stockholders 🔩 Steel construction manufacturers 🔧 Handling pipes, profiles, and long materials 🏢 Indoor and outdoor operation 💼 WHY FT LOGISTICS FT LOGISTICS specializes in forklifts, sideloaders, multidirectional forklifts, and professional warehouse equipment. Every machine undergoes a technical inspection, complete service, and comprehensive testing before delivery to the customer. 🌍 We have more than 100 machines available in stock and deliver equipment throughout Europe, South America, Africa, Asia, and the Middle East. 🤝 WE PROVIDE ✔ Full service before sale ✔ Warranty ✔ Professional technical advice ✔ Leasing and financing ✔ International transport organization ✔ Export services and customs documentation ✔ After-sales support Hsdpfxsz Drrhj Af Seu Hundreds of customers throughout Europe have trusted our machines and return to us for further purchases. 📹 Live online machine presentation available 📸 Additional photos and videos on request 🚛 Individual worldwide transport quotation available FT LOGISTICS 🚀 WE DELIVER MACHINES READY TO WORK.

Condition: good (used), axle configuration: 2 axles, first registration: 02/1968, color: blue, Year of construction: 1968, Rear axle 1: Double wheels Rear axle 2: Double wheels Empty weight: 7.325 kg Carrying capacity: 24.675 kg GVW: 32.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information Hjdpfx Asz Dw D Nsf Sou Fruehauf / Hydraulic Ramps / 32 Ton

Condition: used, functionality: fully functional, empty load weight: 10,210 kg, maximum load weight: 35,790 kg, overall weight: 46,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, loading space length: 8,500 mm, loading space width: 2,525 mm, suspension: air, tire size: 235/75, tire condition: 80 %, color: silver, Equipment: ABS, Object number #31045 BPW axles Steering axle A3 Lift axle Drum brake Tires 235/75 R 17.5 Low-loader 8,500 x 2,525 mm Platform, front, including ramp 3,300 x 2,495 x 500 mm Hydraulic ramps 4.65 x 0.72 m Excavator arm rest Bucket recess 2 pairs of wheel recesses 4x extendable warning signs Wabco Smart Board Can be widened to 3,000 mm Various heavy-duty tie-down straps ABS/EBS Hjdpfx Aoz Dwdcof Seu Raise/Lower LT aluminum support legs 2x rear support Work lights Side underrun protection Rotating beacon Perforated outer frame, platform, front Leasing or financing possible upon request!!!

Condition: used, Year of construction: 2022, operating hours: 3,555 h, load capacity: 2,000 kg, lifting height: 3,850 mm, fuel type: diesel, construction height: 2,546 mm, gearing type: automatic, Equipment: head guard, Linde H20D Diesel Counterbalance Forklift ? 2.0t Lifting Capacity ? 3.85m Lift Height ? Overhead Guard ? Very Well Maintained Hsdpfjyrkn Uox Af Sju For sale is a reliable Linde H20D diesel forklift with a lifting capacity of 2,000 kg. The unit impresses with its proven hydrostatic drive and high-quality build. The forklift is equipped with a standard mast (lifting height 3,850 mm) and 1,200 mm forks, making it ideal for warehouse, industrial, and logistics applications. Features: * LED work lights front and rear * BlueSpot warning system * Comfort seat, imitation leather * Roof, front, and rear windshields * Panoramic interior mirror * Hydrostatic drive * Height-adjustable steering column * Forks 1,200 mm If you have any questions, we are at your disposal at any time.

Condition: used, Year of construction: 2022, operating hours: 4,800 h, Equipment: ABS, all wheel drive, Volvo L 150 H wheel loader Year of manufacture: 2022 The machine is in very good condition and has only 4,800 operating hours. Air conditioning, Hsdpfx Afjzhrckj Sju Central lubrication system Tires have approximately 85% tread remaining.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics Hsdpfxsy Av H Ss Af Ssu • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/1996, total length: 16,210 mm, total width: 2,740 mm, suspension: steel, wheelbase: 14,030 mm, color: other, Year of construction: 1996, Axle Configuration Brakes: Disc brakes Suspension: Leaf spring suspension Rear Axle 1: Max. axle load: 9,000 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Rear Axle 2: Max. axle load: 9,000 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Rear Axle 3: Max. axle load: 9,000 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20% Weights Unladen weight: 15,340 kg Payload: 35,660 kg GVWR: 51,000 kg Condition Damage: None Identification License plate: ZZ-80-67 Hedpoz D Tl Nefx Af Sju

Condition: new, Year of construction: 2017, Liebherr 566 XPower Wheel Loader • 13,309 operating hours • Own weight 23.9 tons • Travel speed 40 km/h • Engine power 200 kW (272 HP) • Transport height 3,590 mm • Tire size 26.5 R25 (50%) • Outer turning radius 7,340 mm • Bucket width 3,000 mm • Bucket capacity 4.2 m³ Hedpfx Afjyk U Dqe Sju • Automatic central lubrication • Integrated weighing system • Overpressure cabin system Condition: New Year of manufacture: 2017

Condition: used, Year of construction: 2022, operating hours: 2,487 h, Equipment: all wheel drive, JCB 3CX Compact backhoe loader from the year 2022, including a hydraulic hammer and 3 buckets! ---- * Manufacturer: JCB * Model: 3CX Compact * Year of manufacture: 2022 Hsdpfsz Ed Dlex Af Sou * Recorded operating hours: approx. 2,487 * Operating weight: 6,275 kg * Power: 55 kW * Includes hydraulic hammer * Includes 3 buckets * Good condition! * Telescopic arm * Folding bucket * More photos and video available upon request (WhatsApp Erik) * Price: EUR 49,900, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee; errors and prior sale are reserved.

Condition: used, Year of construction: 2020, Due to the large number of unserious emails, not all emails will be answered. WhatsApp RX 70-35 Diesel Hybrid, year of manufacture 2020, ready to drive RX 70-35 Gas, year of manufacture 2020, ready to drive RX 70-35 Gas, year of manufacture 2020, for spare parts RX 70-45 Gas, year of manufacture 2020, for spare parts RX 70-70 Diesel-Hybrid, year of manufacture 2018, for spare parts "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED" Hsdpfx Afez Edv Ij Seu

Condition: new, maximum load weight: 30,160 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with immediately and shortly available vehicles on our website. The following is an excerpt of the equipment. Complete equipment available upon request. Frame: Steel welded construction with a front frame bend, front corners chamfered and a chamfer at the rear. Access ramp with excavator bucket recess in the center = a recess at the rear between the longitudinal beams, approx. 2,300 mm long, integrated into the outer frame. - 4 pairs of approx. 4-tonne lashing points - 7 pairs of recessed, retractable approx. 10-tonne lashing rings (2 x on the raised platform, 1 x in the front bend slope, 3 x in the low bed between the wheel wells, and 1 x in the access ramp) - 2 pairs of wheel wells - 1 pair of wheel wells, approx. 2,300/1,270 x 400 mm (L1/L2 x W), in front of the bend, including a one-piece, drive-over aluminum cover, for a maximum surface load of approx. 11,650 daN/piece. - 1 pair of wheel wells, approx. 1,390/590 x 270 mm (L1/L2 x W), between the 3rd and 4th axles, including a one-piece, drive-over aluminum cover, suitable for the transport of wheel loaders with a wheelbase of approx. 2,700-3,600 mm, with wheel diameters of approx. 1,485-1,740 mm, maximum rear overhang of the wheel loader of 2,220 mm. - Width between the wheel wells approx. 1,255 mm (= outer/outer longitudinal beam) Frame attachments: - 5 pairs of mounting pockets in the outer frame for rectangular tube supports, approx. 100x50x5 mm (3 x in the low bed and 2 x on the raised platform). - Without rectangular tube supports. - On both sides of the low bed platform, retractable widening extensions with softwood planks approx. 50 mm (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm). - 4 pairs of folding approx. 10-tonne lashing rings, arrangement: 1 pair at the front of the raised platform, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess, left and right; 1 pair at the front of the raised platform, in front of the bend, inside the longitudinal beams; 1 pair in the low bed at the rear in front of the access ramp, in the excavator bucket recess, left and right. Towing device: - Fixed drawbar with approx. 50 mm heavy-duty towing eye, bent design, silent block bearing, drawbar locking spring with tensioner. - Truck coupling height from approx. 820 mm to approx. 1,010 mm. Hodpfez Ed Azox Af Sju - Drawbar length approx. 1,800 mm. Support system: - 2 hydraulic supports at the rear, to be operated individually, control unit housed in a separate stainless steel box. Axles: - SAF air suspension low loader axles with drum brakes, load capacity approx. 11 tonnes/axle, S-cam brake approx. 300/200 mm, automatic brake linkage adjustment. Wheels: - 16 wheels, tires 245/70 R 17.5, 146/146F, manufacturer Conti HTR2 (tire load capacity approx. 12 tonnes/axle). Braking system/suspension: - Braking system according to ECE regulation R13, two-line pneumatic braking system. - Braking system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed, RSS/RSP stability program, spring brake parking brake on 3rd and 4th axles. - Aluminum air reservoirs for a total weight of 44 tonnes. - Brake/air connection lines with 2 individual coupling heads, yellow/red. - EBS/ABS connection cable. - Rubber strap as a holder for EBS and electrical plugs. - Air suspension with lifting and lowering device, to be operated separately at the front and rear. - Automatic adjustmen

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. Hsdez Engkspfx Af Sju c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: new, power: 68 kW (92.45 HP), fuel type: diesel, fuel tank capacity: 128 l, tire size: 12.5x18-12, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, all wheel drive, = Additional options and accessories = - Adjustable seats - Bucket - Intercoolor - Seat ventilation - Stabilizers - Tool box = Remarks = Country of origin: INDIA Displacement: 4,400cc Torque: 408Nm (41.6 kgm) @ 1200rpm Dimension: 5,960 x 2,350 x 3,610 Brakes: Service: Hydraulically actuated dual line,Parking: Hand operated, disc brake on rear axle,2WD / 4WD: Electrical selection Bucket size: 1.1 Cubic meter Attachments piping: Available Gearbox type: JCB, Synchroshuttle ,4 forward/4 reverse Mainframe: 2ws Sideshift Gear Pump: 123lpm Cab: Shower A/C Pack Hvac Rops ,Fully adjustable seat and soft touch steering wheel ‘Walk through’ two door access Seat belt large convex rear view mirror interior light front screen wiper horn hazard warning system Instrumentation panel includes engine speed engine hours speedometer fuel level Hedoy Tyltepfx Af Ssu water temperature gauge and 12v connection Audible and visual fault warning system for alternator charge coolant temperature engine oil pressure blocked air filter transmission oil pressure and temperature and hand brake on Excavator End: 14' Std Lift Fixed Dipper Loader: Std 3 Spool Float Only Loader Aux Pipework Excavator Controls: Manual (Jcb) Hammer Pipework Gp 1.1m³ Shovel Excavator Bucket: Std 600mm (24") Profile Sae Capacity: 180 Liters Steering: Front wheel full power hydrostatic system utilising the main hydraulic pump via a steering priority valve In the event of engine failure emergency steering is maintained Electrical and Instrument: 12 volt negative ground utilising wiring and connectors meeting IP69 water ingress test standard. Central fuse panel LiveLink standard Bluetooth radio standard Guide me home lights switches on the external lights for 30 seconds to assist operator to walk safely after parking machine Battery: 130 A/hr 900 CCA. Alternator: 90 amp standard. Front working lights: 2 fixed Rear working lights: 2 fixed and 2 adjustable Hydraulic System: JCB vari-matic hydraulics Main relief valve: 228bar Unloader valve: 207bar Filtration through suction strainer and return line JCB Filtermatic filter During excavation the circuit automatically varies hydraulic power to match digging conditions for extra performance control and power Careful routing of hydraulic hoses and pipework guards against site damage and allows easy servicing JCB diagonal (X) pattern controls = More information = Technical information Number of cylinders: 4 Engine capacity: 4.400 cc Axle 1: Tyre size: 12.5x18-12 Axle 2: Tyre size: 16.9x28-12 Engine type: JCB 444 Measures and weights GVW: 7.800 kg Dimensions (LxBxH): 596 x 235 x 361 cm Wheelbase: 224 cm Other information Excavator bucket: 1.1 m^3 Gearbox type: synchronized

Condition: new, Year of construction: 2026, ‼️ROAD PERMIT* Josan – the VALUE-FOR-MONEY LOADER Robust, reliable and affordable – without unnecessary frills. Simple, easy-to-maintain technology without computers or complicated electronics. Our wheel loaders are powder-coated instead of just painted – a clear advantage against rust and de-icing salt. Whether in the forest, agriculture, equestrian farm, construction site or commercial use: the all-purpose loader is versatile and available with around 20 different attachments! ‼️ Feel free to watch our videos on our website S22 Value-for-Money Loader means: Standard equipment ⚙️ OUR COMPONENTS ✅ FREE DELIVERY throughout Germany to your yard! ✅ Road permit* from TÜV SÜD – available only from us! ✅ TÜV SÜD Certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! From the same supplier that sells to high-priced wheel loader manufacturers. This allows for sensitive and precise raising and lowering of the pallet forks. Feel free to test it on our yard. ✅ POWDER-COATED! Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc. are processed in this way. This means extreme rust protection is INCLUDED! ✅ NEW! Larger luxury cab with reinforced steel, so we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SPRUNG COMFORT SEAT adjustable to your weight Hjdpfxozf H Sbs Af Sou ✅ LIFTING CAPACITY approx. 1200 kg! With an unladen weight of approx. 2300 kg incl. bucket ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Service throughout Germany by professionals in our own workshop ✅ Spare parts warehouse in Gemmrigheim. This means we can send parts within 24 hours ✅ Own factory in China ✅ High quality through continuous controls during the production process ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe) Technical data: ➡️ Weight only approx. 2300 kg (with bucket) ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): 4500 x 1300 x 2550 mm ➡️ Tipping height 2.83m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Euro 5 engine ➡️ Articulated steering with oscillating axle ➡️ Comfort cab ➡️ Bucket 0.6 m³ ➡️ Hydraulic oil cooler ➡️ Cab and windshield can be heated with a fan ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ Additional control levers ➡️ Automatic selection of low and high gear ➡️ 2-stage torque converter transmission, electrically controlled ➡️ UVV NEW 1 year Optional: ➡️ Road permit ➡️ Reversing camera ➡️ Air-sprung comfort seat and retractable safety belt ➡️ Electric joystick for moving forward and backward with your thumb on the joystick ➡️ Tires as shown in picture 31/15.5/15 with AS profile (not standard 12.5/16) ➡️ 3rd & 4th control circuits with separate small joysticks ➡️ Floating function ➡️ Stainless steel exhaust ➡️ Combined pallet fork with attachment and tines ➡️ Euro attachment with hydraulic locking pins Net price €10,499.00 +19% VAT €1,994.81 Gross price €12,493.81 Josan – the future of construction Innovative, robust & affordable. *Please inquire about our warranty conditions. Pictures/text and equipment may vary. Subject to errors.

Condition: used, functionality: fully functional, machine/vehicle number: JU3413, Year of construction: 2002, operating hours: 12,760 h, load capacity: 7,000 kg, lifting height: 3,920 mm, free lift: 365 mm, load center: 700 mm, fuel type: diesel, construction height: 2,830 mm, motor manufacturer: Perkins, DGUV certified until: 11/2026, fork carriage width: 260 mm, fork length: 1,380 mm, front tire size: SE300-15, rear tire size: SE300-15, empty load weight: 9,900 kg, total height: 2,830 mm, total length: 5,100 mm, total width: 2,350 mm, color: red, Equipment: CE marking, lighting, sideshift, Forklift Jumbo J/SH/14/50; No. JU3413, year of manufacture 2002; tires SE 3.00-15; platform width 1,400 mm; platform height 1,150 mm; overall height – structural height: 2,850 mm; width 2,350 mm, length 5,100 mm, mast height: 2,830 mm, lifting height 3,920 mm, free lift 365 mm, forks: 260 x 50 x 1400 mm; load capacity 7,000 kg / load center 700 mm, engine: Perkins diesel, approx. 12,760 operating hours – may change slightly as the vehicle is still in use; fork positioner, full cabin. Sale without guarantee and without warranty; Hodpfx Ajz D Aacof Sju Vehicle sale ex works – must be picked up by the buyer; Inspection and test drive are possible by appointment.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,682 h, 2019 | John Deere 320G | Used Skid Steer Loader | 3,682 hours Location: Indiana, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Skid steer loader with a 69 hp Yanmar diesel engine, enclosed cab with heat and A/C, 2-speed powertrain, auxiliary hydraulics, Power Quick-Tatch, and a 78" high-volume bucket. Equipped with the EH Performance Package, Attachment Performance Package, reversing fan kit, and cold-start package. ✔ Enclosed cab with heat and A/C ✔ Mechanical vinyl suspension seat ✔ 2-speed powertrain ✔ 12 x 16.5 tires ✔ EH Performance Package ✔ Attachment Performance Package ✔ Reversing fan kit ✔ Power Quick-Tatch ✔ AM/FM Bluetooth radio ✔ HD rear grille ✔ Auxiliary hydraulics ✔ Cold-start package ✔ Engine air precleaner kit ✔ 78" high-volume bucket Key specs: Engine power: 69 hp (net: 66 hp) Engine hours: 3,682 hr Operating weight: 3,246 kg Rated operating capacity: 994 kg Tipping load: 1,989 kg Max. speed: 19 km/h (12 mph) Fuel tank: 79 L Hydraulic flow: 78 L/min Engine: Yanmar 4TNV98C Emission standard: EPA Final Tier 4 (FT4) / EU Stage IV Dimensions (L × W × H): 2,850 × 1,700 × 2,060 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support Hjdsz Elnrjpfx Af Sju ✔ Secure transaction on every purchase

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 Hsdpfez Ec Trsx Af Ssu * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.

Condition: new, Year of construction: 2024, Price 99000¤ + VAT HMK 102 B Alpha Stage 5, turbo diesel engine 99.8 HP (74.4 kW, 4.4 liters, 4 cylinders Perkins, Road registration possible Luxury glass cabin "Jumbo" of the latest generation, FOPS/ROPS certified with 2 doors Air conditioning and heating CD-MP3 audio device with antenna and speakers Music player ? Bluetooth Street lighting ? 2 front, 2 rear, with flashing light Work lights ? 4 front, 4 rear, independently adjustable Beacon ==> LED reversing alarm Manual mode to activate the gearbox in the event of electronic system failure Tool box, work suit Hedpszfyk Rsfx Af Sju Documentation: user manual, spare parts catalog Servo-assisted, double pedal together or separately, including hydraulic accumulator for effortless braking in engine off Luxurious driver's seat with armrests, headrest, adjustable to the driver's position and weight and seat belt Tilt-mounted steering column TIPshift joystick for front loader 6 forward gears, 3 reverse gears, full automatic/Powershift Two adjustable and tilting panoramic mirrors Windscreen wipers front and rearAutomatic transmission 6 forward gears/3 reverse gears, full Powershift/Autoshift Heavy-duty axles 100% differential lock (rear axle) + limited-slip differential (front axle) Flow-sharing system (enables combined movements)Closed, load-dependent flow-sharing hydraulic system Integrated four-wheel drive (4x4)Front tire 20"Rear tire 16.9-28 12-plyTelescopic arm + Brake line BRAKE LINE VALVE/TELESCOPIC Brake line Double acting hydraulic line MSS (Motion Stabilization System)Auto-locking systemHydraulic joysticks Load control valve (REXROTH-LS (LOAD SENSING)) Variable displacement piston pump With pneumatically suspended seat Retro mechanical displacer Retro hydraulic displacer Price differenceFuel refill pump Selector lever excavator pattern ISO-SAE Rubber pads on stabilizers Safety valves for lifting armSafety valves for loading bucket inclination Safety valves for excavator arm and boom cylinders Overload warning system, EXC. OVERLOAD WARNING SYSTEM, LOADER AUTOMATIC IDLE/STOP Mechanical quick coupler - HMK factory Mechanical quick coupler Hybrid HMK - other brand Mechanical quick coupler Hybrid HMK-JCB Hydraulic quick coupler for 4:1 bucket Standard loader fixed bucket 1.1 m3, 2420 mm width Standard loader 4:1 bucket 1.1 m3, 2420 mm width Forklift forks on the bucket or quick coupler - tiltable Forklift forks on the bucket ==> 6:1 bucket is attached ==> here bucket is attached to forklift Forklift attachment for heavy loads Hydraulic quick coupler cable set (installation costs not included) ==> must be checked Excavator bucket 40cm with teeth and side cutters - HMK Factory Excavator bucket 0.18 m 3 60cm with teeth and side cutters - HMK make Excavator bucket 90cm with teeth and side cutters - HMK make Clearing bucket 150cm without teeth - HMK WestStift (2x pins per bucket) without road approval "Guarantee 1 year or 1,800 hours, whichever comes first, valid for EU area, or subject to confirmation depending on the country of use" CE certificate Subject to prior sale and errors. Images show original consumption data.

Condition: new, functionality: fully functional, fuel type: diesel, overall weight: 4,635 kg, Year of construction: 2025, operating hours: 75 h, For sale: Bobcat L75 articulated wheel loader, purchased brand new in November 2025. The machine is in pristine condition (like new), with only 75 operating hours. The cabin is spotless, with the original protective plastic film still on the seat. Hjdoz Ahr Dopfx Af Ssu Sold fully equipped with high-quality professional attachments included in the price: * Professional V-Blade (plow type): - Working width: 2.80 meters - Fully hydraulic operation with direct controls inside the cab - Spring-loaded safety shock-absorption system * Multifunction Bucket (4-in-1): - Split-opening / folding mechanism (opens hydraulically at the center) Key Specifications & Condition: * Operating hours: ~75 original hours * Purchase date: November 2025 * Condition: Like new, seat film intact, zero wear, ready for immediate use.

Year of construction: 2001, condition: used, Number of guide tubes: 3, mains connection: 380V, 3-phase, frequency: 50Hz, control voltage: 24VDC, rated current / FLA: 5A, an on-site inspection is possible, not connected to power. Hsdsz Egffepfx Af Seu

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 12 h, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 1,920 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork carriage width: 1,400 mm, fork length: 1,200 mm, empty load weight: 5,814 kg, total length: 1,450 mm, drive type: Elektro, construction width: 1,530 mm, Four-way side loader Load center: 600 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tire type: Solid rubber Front tire size: 16x7x10 Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire size: 22x10x1.6 Rear tire condition: 80 - 100% Battery voltage: 48V Battery Ah: 930Ah Battery manufacturer: Energizing Hedpfxozzgpre Af Sou Battery year of manufacture: 2026 Battery condition: New 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield