Used F.u.p. Faceplate for sale (629)

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, turning diameter 815 mm centre distance 3000 mm swing diameter over slide rest 485 mm spindle bore 137 mm spindle turning speed range max. 1200 rpm rapid traverse 5 m/min spindle motor 28 kW tailstock quill diameter 115 mm tailstock quill stroke 250 mm total power requirement 30 kW Hfedpfxjy H A Nzj Ag Isg weight of the machine ca. 7,0 t dimensions of the machine ca. 5,87 x 2,10 x 2,10 m Equipment: * CNC-control E.C.S. 2402 * 3-jaw chuck * 4-jaw faceplate, diameter 700 mm * 4-jaw faceplate, diameter 400 mm * 3 Steady rests * Chip Conveyor Without boring bar holder and boring bar.

Condition: used, functionality: fully functional, Maximum workpiece length: 500 mm Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Max. grinding diameter without steady rests: 100 mm Max. diameter: 240 mm Workpiece Swivel: 90° Grinding spindle slide Min./max. swivel: 30° Min./max. transverse movement including 300 mm quick adjustment: 100 mm Wheel diameter after rotation 1st degree: 320 - 400 mm Hsdpowhp D Uefx Ag Iofg 2nd degree: 260 - 320 mm Max. workpiece weight between centers: 60 kg Max. workpiece weight in chuck: 20 kg Max. workpiece weight in faceplate: 20 kg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. Tilt: 12° Min./max. longitudinal travel: 2 - 500 mm Infinitely variable table travel: 0.5 - 5 m/min Handwheel adjustment: 2 and 20/rev

Condition: good (used), Machine in good working condition, 3-jaw chuck, including tool holders. Clamping plate 800 mm Max. working diameter mm 1100 Max. working height mm 795 Max. working weight kg 4000 Z axe mm 750 Hfjdpfx Agsy Hq Npo Isg Spindle revolutions 500 rpm Machine dimensions mm 5630 x 4265 x 4530 Machine weight kg 13500

Condition: used, Year of construction: 1977, centre height 450 mm centre distance 6150 mm spindle bore 140 mm turning diameter over bed 900 mm turning diameter over slide 660 mm spindle drive 15 kW external dimensions Breite 1750mm Hjdjy Hl N Repfx Ag Ijfg length 9000 mm height 1650 mm weight 8000 kg spindle speed: 11-500 UpM With a chuck, collet, and faceplate

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Hsdpfjy Nfqmsx Ag Iofg

Condition: good (used), functionality: fully functional, SL 100 Door Lock Milling Machine Hsdpfxeygm Aws Ag Iefg - with milling motors for faceplate and handle - with pneumatic clamps - 1.7 kW Transport available at extra cost! Due to the age of this used machine, warranty is excluded for commercial customers.

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual Hsdpow Ew D Djfx Ag Ijfg

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Hfsdpfev I T Ewex Ag Ijg Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, Model: WMW NILES DKZ4000 Vertical Turret Lathe (VTL) Faceplate Diameter: 3,500 mm Max. Turning Diameter: 4,000 mm Hjdpfx Agsy Ivwbj Iefg Max. Turning Height: 2,000 mm Side Head Vertical Travel: 1,700 mm Side Head Horizontal Travel: 1,000 mm Origin: Germany (WMW NILES)

Condition: refurbished (used), functionality: fully functional, Lathe Brand: ERNAULT Model: CHOLET 550 Distance between centers: 1000 mm Center height: 250 mm Max. diameter over bed in front of faceplate: 550 mm Max. diameter over bed: 500 mm Max. swing in gap: 710 mm Hedpfx Aoyapkwjg Iofg Spindle bore: 52 mm Morse taper: No. 5 Max. cross slide travel: 350 mm Power: 11 hp

Condition: good (used), functionality: fully functional, Vertical lathe BERTHIEZ Hodpfoy Egb Sex Ag Iefg Brand: BERTHIEZ Table diameter: 2550 mm Max. turning diameter: 2800 mm Machinable height: 2300 mm Max. load: 25 t Speeds: 1 - 160 rpm Floor dimensions: 4000 x 4000 mm

Condition: good (used), Year of construction: 1983, Faceplate diameter: 1250 mm Hedpfx Agjy Ex Eps Ijfg Max. turning diameter: 1400 mm Max. turning height: 1180 mm Max. ram stroke, vertical: 750 mm Table load capacity: 5,000 kg Faceplate speed range: 4 - 210 rpm Vertical slide swivel adjustment: 45° Feed range: 0.044-8 mm/rev Rapid traverse: 2 m/min Machine dimensions (L x W x H): approx. 2715 x 2665 x 3950 mm Total weight: approx. 16,500 kg Accessories / Special features: • 2-axis digital display, make ACU-Rite • Faceplate Ø 1250 mm with 4 jaw chucks • 5-position turret head Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1958, turning diameter over bed 3050 mm turning diameter over slide rest 2500 mm turning length 21200 mm Control Siemens type 840D turning speeds 0,236-60 U/min faceplate 3000 mm main drive motor 200 kW tailstock quill diameter 900 mm steady 1200 mm steady 1200 mm steady 750 mm steady 750 mm with live steady 2000 mm faceplate 2000 mm Thickness 330 mm workpiece weight 200 t vier Bahnenbett Mitlaufendes Stützlager durchmesser 680 Bohrstangenlagerung Rollenbock Rollenbock mit Adapter Hfodpfx Ageyqtpro Isg Bohrstand 450 x 10300 mm Bohrstand 650 x 11100 mm Innenschleifmaschine Faros Adapt for Bohrstangenaufnahme The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Hedjx Ahx Dspfx Ag Isfg Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, total height: 1,750 mm, total width: 1,850 mm, overall weight: 3,800 kg, product length (max.): 2,850 mm, number of axes: 2, Horizontal turning machine manufactured in 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 120 mm. It includes a robust tool system with a turret and offers a cutting speed of 140 m/min. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details. • 20 kW = real power (mechanical/electrical output) • 27 kVA = apparent power (includes reactive power) • Internal taper: metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Max. faceplate diameter: 500 mm • Maximum chuck diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: turret (VDI 40) • Tool shank size: 32 x 25 mm • Number of longitudinal slides: 1 • Number of cross slides: 1 • Center distance: 1100 • Cross travel: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Feed rate longitudinal: 0.001 – 20 mm/rev • Feed rate cross: 0.001 – 20 mm/rev • Rapid traverse longitudinal: 10 m/min • Rapid traverse cross: 5 m/min • Feed force longitudinal: 10000 N • Feed force cross: 7000 N • Metric thread range: 0.1 – 250 mm • Whitworth thread range: 1/4 – 56 threads/inch • Module range: 0.125 – 28 • DP range: 0.05 – 48 • Maximum cutting cross section: 2.25 mm² • Cutting speed: 140 m/min • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Coolant consumption (normal): 30 l/min at 0.4 bar • Coolant consumption (increased): 30 l/min at 3.5 bar • Noise level: 80 dB(A) • Electrical: • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: A small actuator that switches between the gear stages is defective; both gear stages are functioning. Additional equipment Hedpfsy Em Avjx Ag Ijfg • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining Hsdpfx Asxmd Sujg Iefg The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Hfedpfx Agjy Ehnte Isg

Condition: good (used), Year of construction: 1999, Ref. -No.: 10638 Manufacturer: TOS HULIN Type: SKA 12 CNC Year of construction: 1999 Type of control: CNC Control: Sinumerik 840 C Storage location: Halberstadt Country of origin: Czech Republic Turning Diameter: 1450 mm Turning Height: 1450 mm Tool Taper: SK50 Power Capacity: 60 kW Planar disk: 630 RPM Planar disk: Ø 1250 mm Head Magazine: 30 academic subject Plate magazine: 24 academic subject Further information: - Hydraulically operated power chuck - Drive for rotary tools Hedpfoy Ed Suox Ag Iefg - Third controlled C-axis - Heidenhain linear scales in X and Z - Chip conveyor and extraction system - Renishaw for tool control The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2024, Ref. -No.: 10605 Manufacturer: VDF WOHLENBERG Type: E 1000 Year of construction: 2024 Type of control: CNC Control: Sinumerik Hfsdpfoy Ed Nasx Ag Iog Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX Turning Diameter Over Bed: 1500 mm Turning Diameter Over Slide Rest: 1150 mm Centre Height: 750 mm Centre Distance: 9000 mm Faceplate Diameter: 1000 mm Spindle Bore: 80 mm Spindle Speed Min.: 1,4 - 280 RPM Turning diameter over cross slide: 800 mm Swing diameter over cross slide: 800 mm Space requirement: 13000 x 2650 x 2250 mm Power Capacity: 320 kW Weight Of The Machine Ca.: 8 t Max. turning diameter (in the offset): 2000 mm Size of the inner cone: metr. Kegel 1:20 quill cone: 80 O Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Hfodpfjy Ed Ezjx Ag Ieg Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Machine is still in production and can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 1979, functionality: limited functionality, spindle bore: 90 mm, overall weight: 8,500 kg, turning diameter: 800 mm, total length: 3,500 mm, Universal lathe, in working condition, although some feed mechanisms are not functioning; sold with the accessories shown in the photo (centers, faceplate, chucks). It has an 800mm swing over the bed, but the front section of the bed is removable to allow for a 1000mm swing; it can accommodate a shaft up to 3500mm in length. The headstock can accept a spindle with a 90mm diameter. Hfsdpjy Idbnofx Ag Ijg

Condition: excellent (used), Faceplate: 2500 mm Max. turning diameter: 2800 mm Max. turning height under tool edge: 1500 mm Spindle speed: 110 rpm Hjdpfxoy D Tw De Ag Ijfg Workpiece weight: 10 tons Digital readout Jaw boxes

Condition: good (used), Spindle: 130 mm Travel X: 5000 mm Travel Y: 2500 mm Travel Z: 1000 mm Rotary table: 2000 x 2500 mm, approx. 30 tons With faceplate Vertical head Hfedpfxoy D Tvgo Ag Iog Some tools included Without platen field

Condition: new, Year of construction: 2026, Universal Lathe GOLIAT 800 x 3000 (CJ6280QC/3000) Solid cast iron bed construction ensures maximum vibration reduction. Additionally, the bed is hardened and precision-ground. It is highly resistant to torsion and does not vibrate, meeting the basic requirement for accurate turning. Centralized feed control system, lead screw, and feed rod for threading. Digital readout operates in three axes: longitudinal, cross, and compound slide. Processed electronic signals from optical scales display measured movement values on a digital screen. The lathe is equipped with a high-quality, reinforced spindle bearing system. Modern spindle support with ball bearings. Optimal performance is ensured by a large spindle bore of 105 mm, 3000 mm between centers, a 315 mm 3-jaw chuck, 500 mm bed width, and a powerful 7.5 kW motor. Rapid longitudinal and cross feed system significantly reduces machining time and increases productivity. Hardened and ground gears in the spindle gearbox ensure long-term operational stability. Equipped with a lead screw and feed rod for threading, as well as automatic longitudinal and cross feeds. Easy adjustment of spindle speed and automatic feed via an ergonomic control panel on the gearbox. Thread dial indicator designed for precise thread counting. This function saves time by allowing the lead screw nut to be disengaged and the carriage quickly returned to its original position manually. The bed features a removable gap for machining larger workpieces, such as discs. This model allows machining up to a maximum diameter of 900 mm with the gap removed. Technical Specifications: Max. turning diameter over bed: Ø800 mm Max. turning diameter over carriage: Ø540 mm Max. turning diameter in gap: Ø1010 mm Gap length: 240 mm Distance between centers: 3000 mm Bed width: 500 mm Tool size: 25 × 25 mm Max. compound slide travel: 145 mm Max. cross slide travel: 375 mm Spindle bore: Ø105 mm Spindle nose: D1-8 CAMLOCK Spindle speeds: 12 speeds (36–1600 rpm) Number and range of longitudinal feeds: 65 (0.063–2.52 mm/rev) Number and range of cross feeds: 65 (0.027–1.07 mm/rev) Metric threads: 22 (1–14 mm) Inch threads: 25 (28–2 TPI) Module threads: 18 (0.5–7 mm) DP threads: 24 (56–4 DP) Rapid longitudinal feed: 4.5 m/min Rapid cross feed: 1.9 m/min Tailstock quill diameter: 75 mm Tailstock taper: MT5 Max. tailstock quill travel: 150 mm Tailstock cross adjustment: ±15 mm Main motor S1/S6: 7.5/9 kW / 400V Rapid feed motor: 250 W Coolant pump: 60 W Dimensions (L × W × H): approx. 4500 × 1100 × 1450 mm Weight: approx. 4600 kg (±2%) Standard Equipment: 3-axis digital readout 3-jaw self-centering chuck 315 mm 4-jaw independent chuck 400 mm Faceplate 400 mm Rapid feed system Steady rest Hfsdoy H Emiepfx Ag Isg Follow rest Fixed centers MK5 (2 pcs) Spindle reduction sleeve Cooling system Work light Chuck and tool post keys Set of service tools User manual CE declaration of conformity

Condition: good (used), Year of construction: 2014, machine/vehicle number: 2014230, Offer 25074 Technical specifications: - Load capacity in horizontal position: 600 kg - Faceplate diameter: 1000 mm - Faceplate motorized and tiltable - Faceplate speed electrically infinitely adjustable - Welding current transmission: 500 A - Drive: 400 V - Table height in horizontal position: 900 mm - Foot switch - Space requirements: approx. W 1000 x H 900 x D 1350 mm - Weight: approx. 450 kg Hfjdpfx Agoy Hraij Ijg