Used Cutting Mills for sale (22,087)

Year of construction: 2012, condition: used, Technical details: Number of working hours: ca. 700 h number: Rotormesserhalter: 5 number: Stattormesserhalter: 4 Rotor-Ø: 440 mm material: PET control voltage: 24 VDC kW Cutting mill (shredder) The plastic granulator is intended for industrial use. Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET Plant consists of a granulator with belts and a bottle bunker. Material is fed into the bunker via feeding belt Hopper 20M2 V2A complete with gear motor 7,5 kW, The screw conveyor is activated by the control system of the granulator. Bucket volume approx. 20 m³, HxWxD: 4400x3300x3300mm, weight approx. 27,0 to, Bunker with discharge unit CentriCut 44SR granulator 55 kW, granulator 55 kW (50Hz, 400Volt) and feed screw 55 kW (50Hz, 400Volt) Grinding chamber: rotor knife length 272mm, weight approx. 2.0 to Conveyor belt NT9, belt length 3500mm, useful belt width 416mm, (guide profile height 60mm, driving bar height 60mm, driving bar distance approx. 500mm) total length 3550mm, total width 780mm, total height 2350mm, weight 250kg Sound insulation LxWxH: 2700x2300x2500mm, weight 1,3 to Tunnel detector 600 is integrated into the CentriCut cutting mill on the control side, scanning side 600mm, passage width 840mm, passage height 400mm, weight approx. 150kg The plant is ready for transport and for sale. i.D. Tjdsu Nw Ebepfx Amroc *

Condition: new, machine/vehicle number: Baureihe GSP, When shredding long pipes and profiles, conventional granulators face significant challenges. In most cases, pits or platforms are required to feed the long and bulky parts. This is why ZERMA developed the GSP series. Thanks to the nearly horizontal feed hopper, long pieces can be easily fed, and the risk of blockage is eliminated as the machine meters the material automatically. When the grinding chamber is overfilled, no further material is accepted until the machine can operate again without overloading the motor. Todpfxjyr Thkj Amrec ZERMA also offers a wide range of options such as extraction systems, conveyor belts, metal detectors, fine material separators, and more.

Year of construction: 1997, condition: used, machine/vehicle number: 540897, pipe diameter max. 1,500 mm tool diameter max. 200 mm feed rate 40 mm / min Tjdpfxed Srdxo Amrsc sawing of pipes in steel and greycast  iron with wall thickness of up to 22 mm milling of pipes in steel and grey cast iron with wall thickness of up to 15 mm cutting speed 35 m / min compressed air requirement 6 bar - 2m³ / min weight approx. 90 kg  

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: TH GST 4060 2411 001, overall weight: 1,650 kg, rotor diameter: 400 mm, number of blades: 6, rotor width: 600 mm, power: 22 kW (29.91 HP), The compact inline granulators of the GST series are designed for use in injection molding and blow molding operations. They are suitable for recycling, for example, bulky parts such as bottles, canisters, crates, sprues, and injection-molded parts. Thanks to their low feed height, the machines can be easily loaded by hand or with a small conveyor belt. Low noise emissions and minimal space requirements make the GST series the perfect solution for inline size reduction. All GST series machines feature a compact, sound-insulated machine housing and a noise-dampened feed hopper. The feed hopper can be opened and closed via a gas pressure damper. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths from 300 up to 1000 mm. Smaller machines come with an open F-rotor, while the larger models are equipped with the heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents blockages. Thanks to the modular construction of the granulator, it can be easily upgraded with additional options such as replaceable wear plates. As with all ZERMA granulators, rotor and stator knives can be adjusted outside of the machine, significantly reducing downtime during maintenance. An adjustment gauge is included in the standard delivery. The control cabinet is mounted externally on the noise protection enclosure, and all wiring is routed internally within the unit. Technical Data: Rotor diameter (mm): 400 Rotor width (mm): 600 Drive (kW): 22 Rotor knives (rows): 3 x 2 Stator knives (rows): 2 Todpfey Dgpmsx Amroc Screen perforation (mm): > 8 Cutting chamber (mm x mm): 400 x 600 Weight (approx. kg): 2000

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min Tjdpfxsvtpp Nj Amrec - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: used, POWERLOCK MOUNTED MILLING HEADS, price €7,500 Two cabinets filled with milling heads for various applications, approximately 45 pieces. Working dimensions in mm: 40 - 1 piece 60 - 12 pieces 80 - 7 pieces Tedpfx Ajzxguiemrec 100 - 9 pieces 130 - 3 pieces 140 - 1 piece 150 - 7 pieces 170 - 3 pieces 180 - 2 pieces

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Tededqzcxjpfx Amrsc Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: ready for operation (used), Ewag WS11 Tsdpfx Aozwz Ubsmrsc Standard microscope, top view.

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Tsdpfx Amoztplgorec Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. Tedpjzut Axjfx Amrec FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: used, Technical specifications: Tedpfxozhufzo Amroc Max. grinding wheel diameter: 150 mm Dividing head for sharpening milling cutters, 24' Adjustable sharpening angle Manual feed Motor power: 0.3 kW Overall dimensions: Length: 700 mm Width: 800 mm Height: 1500 mm

Condition: used, Wilhelm Stehle 2/24 milling cutter sharpener Todszhuddopfx Amroc

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel -Year of construction 1998 - made of stainless steel - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm - Working width: 500 mm Tedpfx Amoh Rwc Esrsc - 3 rows of knives

Condition: excellent (used), Diameter Ø 700 x 25 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Tjdpfx Amewz Nbmeroc DE - 44143 Dortmund - Wambel

Condition: used, 1 used engraving cutter grinder Manufacturer: Deckel Model: SOE with optics Year of manufacture: 1988 Todpfjyl Iipox Amrjc Technical specifications: Motor speed: 2800 rpm Grinding spindle speed: 4500 rpm Drive power: 0.55 kW / 380 Volt Weight approx. 200 kg Accessories and equipment: Collets Optical system Machine base / pedestal Tools

Year of construction: 2013, condition: excellent (used), BARRETO 1620B Professional single-axle tiller with a 16 HP 2-cylinder Briggs & Stratton gasoline engine, continuously variable hydrostatic drive, hydraulic tiller shaft drive with speed adjustment, height-adjustable handlebar, 197 operating hours according to the meter. This single-axle tiller comes directly from customer service, is ready for immediate use, and has the usual signs of wear and tear typical for this type of equipment. Sold as a used machine, excluding returns, warranty, and guarantee. THE PRICE IS EXCLUDING 19% VAT! Tedpfxsinkabj Amrsc Viewings are welcome. Shipping costs €120 nationwide.

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter Tedpsgfcnkjfx Amroc -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter Tedpfxsv D Dpxo Amroc -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.2 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/180/H115 mm -Total weight: 18.3 kg

Year of construction: 2020, condition: used, module 4 Tjdpjz Dburefx Amrjc diameter 180 mm Bore diameter 40 mm width 67 mm 5 weight 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Tedpfsyxy S Rsx Amrsc Very good condition

Condition: good (used), Spline hobs, gear cutters, modular milling cutters, gear hobbing cutters, gear form cutters, modular milling heads, shell end mills, cylindrical milling cutters, milling cutters, hobs, spline hobs -Manufacturer: WMW PWS, 29 hob cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 490/300/H70 mm Todjgfcm Hjpfx Amrjc -Total weight: 30.7 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 7 pieces -Type: Mod.1,75 EW 20° see photos -Hole: Ø 32 mm Tedpfx Ajv D Dn Uemroc -Price/Delivery: complete -Transport dimensions: 350/190/H120 mm -Total weight: 22.2 kg

Condition: excellent (used), Face milling cutter (28148) Manufacturer: ISCAR 139.8 mm cutting diameter 7.15 mm maximum depth of cut Accommodates 8 cutting inserts Todpfxjg Er H Re Amrsc Weight with carton: 3.8 kg

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg Todpfx Amey D Ndyerjc

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter Tjdpfx Amsv D Duzerjc -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.2.5 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H125 mm -Total weight: 19.4 kg