Used Cormak 500X1000C Universal Lathe for sale (8,987)

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Rodpoycqhcjfx An Aet Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 1000L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 1000-liter vertical compressed air tank equipped with fittings and the IZBERG N20S air dryer, provides a complete, efficient, and modern solution for compressed air systems. The LUFT series compressor from the Polish brand Cormak represents the latest technology in pneumatics, combining high-quality materials and precision-engineered components. Its low operating costs, ease of maintenance, ergonomic and durable design, and high performance guarantee reliable and efficient operation in industrial applications. Technical Specifications – LUFT 1500 INVERTER Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Rjdpjxnyhujfx An Aot Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Connection (BSP): 1" Maximum Operating Pressure: 10 bar Max. Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Flow Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 1000L Vertical Air Receiver Tank Capacity: 1000 liters Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Weight: 230 kg Number of Connections: 6 Connection Sizes: 2", 1/2" Dimensions: 230 × 80.8 cm

Condition: ready for operation (used), Year of construction: 2023, arm reach: 850 mm, number of axes: 6, This 6-axis Universal Robots UR5 e was manufactured in 2023. It features a payload capacity of 5 kg and a reach of 850 mm. The robot arm is equipped with a 12-inch touchscreen and a user-friendly graphical interface for programming. If you are looking to get high-quality automation capabilities, consider the Universal Robots UR5 e robot arm we have for sale. Contact us for further details. • Payload: 5 kg (11 lbs) Rsdpfxsy A Sgze An Ajt • Degrees of freedom: 6 rotating joints • Programming/control: 12-inch touchscreen with PolyScope graphical user interface

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Digital Signal Processing Digital signal processing. A plotter with a working area of 1220x1230 ensures smooth operation of the device and accuracy in processing. The memory built into the controller allows the machine to work without the need to load the program each time. very quiet operation and guaranteeing increased durability. The Premium version meets the expectations of individualists as well as companies with a lot of orders. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 3.7kW / 18000 rpm. inverter, air-cooled Workspace 1230x1220x210mm Control DSP Software resolution 0.001mm Power 400V Weight 450kg Machine dimensions 2000x1800x1640mm Table height 715mm Guides linear Transfer toothed rack (Z axis - ball screw) ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Equipment Leveling Feet, snake, clamps, screws, keys, Rjdpfxoiz Avvo An Aot 2 boxes of cutters, 1/8, 1/2 and 5-6 mm collets The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W Rodpfxoy En E Ss An Ast 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: excellent (used), Model: UR5 Year of production: 2012/2013/2014 Weight: 18.4 kg Maximum payload: 5 kg Reach: 850 mm Rodpfx Aewu Dr Ten Ast Quantity: 4 units

Condition: excellent (used), Year of manufacture: 2018 Reach: 1300 mm Payload: 10 kg Robot weight: 28.9 kg Repeatability: ±0.1 mm Gripper: Schunk RH 907 Force sensor joint: AXIA80-ZC22 Software for controlling the above-mentioned devices and cameras (cameras not available) Control: handheld terminal + control cabinet Rodpfx Anowtp Tme Ajt Table not included

Condition: excellent (used), Model: UR-6-85-5-A Serial number: 2011203044 Year of manufacture: 2011 Weight: 17.8 kg Maximum load capacity: 5 kg Country of manufacture: Denmark Rsdpfx Anjwu Dnhe Aot

Condition: excellent (used), Year of construction: 2019, Automatic workstation with robot UNIVERSAL UR10 Conveyor belt: total length approx. 200 cm UNIVERSAL UR10 industrial robot: Year of construction: 2019 Serial number: 2019301077 Maximum payload: 10 kg Maximum boom length: 1300 mm Weight: approx. 20 kg Rsdpfx Anjvuzztj Aot Equipment: teach terminal, machine housing

Condition: excellent (used), Reach: 1300 mm Payload: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Year of manufacture: 2018 Serial number: S300711 Rodpfsw N N Dcjx An Aet Welding machine Lorch S5 RoboMIG XT Cobot Welding current: 400 A.

Condition: excellent (used), Reach: 850 mm Payload: 5 kg Robot weight: 18.4 kg Protection class: IP54 Included: - Touchscreen tablet Rjdewtp Tyopfx An Aot - Robot arm - Robot controller QUANTITY: 2 ROBOTS, PRICE PER UNIT Year: 2018 Reach: 850 mm Payload: 5 kg Robot weight: 18.5 kg Number of axes: 6 Gripper: included Control: touchscreen tablet + controller The price includes only the robot arm with the controller and control cabinet, excluding any additional equipment shown in the photos.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Rjdpfsudim Djx An Aot Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Rjdomrp Tlopfx An Ajt Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Rodpfxey Emgbs An Aot CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its weight (103 kg) makes it stable and vibration-free during cutting materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 400V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0° ø125 mm 150×100 mm 120×120 mm -45° ø95 mm 95×76 mm 85×85 mm +60° ø50 mm 56×55 mm 45×45 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual Additional 2 blades M42, 5L Emulgol Magnetic chip collector ZW580

Condition: new, Year of construction: 2026, The CORMAK PT265T Planer-Thicknesser is a professional machine designed for intensive and precise machining of solid wood and wood-based materials. The new version features an innovative combined table system that significantly increases work efficiency and eliminates setup errors typical of older designs. With a 2.6 kW motor and a stable construction, the PT265 is a reliable tool for carpenters, craftsmen, and production workshops. Key Advantages New combined table system – constant calibration of the infeed and outfeed tables eliminates errors and improves precision. Stable cast-iron construction – 170 kg machine weight minimizes vibrations and enhances safety. Total motor power S6: 2.6 kW – ensures smooth and efficient processing of hardwoods. Unique Benefit: Feed Rollers in the Thicknesser – specially designed roller extensions integrated into the thicknesser table support long and heavy materials, making feeding and receiving easier while improving surface finish quality. Easy conversion from jointer to thicknesser – quick switching between modes reduces operating time. Three HSS knives – precise cutting and high-quality surface finish. Redpfjy El R Eex An Ajt 265 mm working width jointer – large working area allows machining of wide workpieces. Construction and Technology The CORMARK PT265T is a modern wood thicknesser built on a robust, reinforced structure with cast-iron components. The worktables are ground and properly balanced, ensuring repeatability and accuracy. The new table system enables synchronized height adjustment—once set, the table level does not require recalibration when changing the planing thickness. The centrally positioned thicknesser table on a column ensures even material feed without deviation. Rubber feet further reduce vibrations, improving component durability and machining quality. Performance and Precision With a 2.6 kW (S6) motor, the machine delivers high efficiency while maintaining stable operating parameters, even when machining hardwoods. The cutterhead with a 75 mm diameter, equipped with three knives and running at 4000 rpm, ensures a perfectly smooth surface finish. A precise graduated scale allows accurate table height adjustment. The aluminum tilting fence (700 × 150 mm) with an adjustable angle range of 90–45° enables precise jointing at various angles. Standard Equipment Cutterhead with three HSS knives Aluminum fence 700 × 150 mm Graduated handwheel for table height adjustment Cutterhead guard Built-in dust extraction port Ø100 mm Anti-vibration rubber feet Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 4000 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives: 3 Cutterhead length: 262 mm Knife dimensions: 250 × 25 × 3 mm Max. jointer width: 265 mm Max. thicknesser width: 265 mm Max. planing height: 180 mm Max. thicknesser cutting depth: 3 mm Max. jointer cutting depth: 2.5 mm Feed speed (thicknesser): 6 m/min Fence dimensions: 700 × 150 mm Machine dimensions (L × W × H): 1080 × 269 × 1000 mm Weight: 170 kg Total motor power: S6: 2.6 kW Power supply: 400V

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90–45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 410 mm Maximum thicknesser width 408 mm Maximum planing height 5–225 mm Maximum thicknesser machining depth 3.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Redpfevxh T Djx An Aot Planer table dimensions (L×W) 1640×410 mm Weight 280 kg Motor speed 2800 rpm Motor power s1 4.0 kW s6 5.6 kW Power supply 3-phase, 400V

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90 – 45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 310 mm Rsdpfx Ajvxh Rvon Ast Maximum thicknesser width 308 mm Maximum planing height 5–225 mm Maximum thicknesser machining depth 2.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Planer table dimensions (L×W) 1300×310 mm Weight 250 kg Motor speed 2800 rpm Motor power s1 3.0 kW s6 4.2 kW Power supply 3-phase, 400V

Condition: new, Year of construction: 2026, Thickness and Surface Planer CORMAK PT310ECO with Cutter Block – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer‑thicknesser engineered for high-quality finish, reliability, and low noise levels. Thanks to its cutter block, it is an advanced woodworking machine combining jointing and thickness functionality in a single robust structure. The stable build and powerful motor make it a versatile solution for professional woodworking—ideal for both carpentry shops and artisan workshops. Key Machine Advantages Cutter-block shaft – three HSS knives 310 × 25 × 3 mm ensure long service life, precise planing, and reduced noise. Massive work tables – cast iron construction minimizes vibration and ensures stable material feed. High power – motor rated at 2.2 kW (S1) / 2.6 kW (S6) provides consistent performance even under heavy loads. Large working area – 310 mm width and up to 180 mm thickness capacity accommodate various workpieces. Efficient chip extraction – Ø100 mm port enables seamless connection to a dust‑extraction system. Construction and Technology The PT310ECO is equipped with a 75 mm diameter cutter block that ensures smooth operation and superior durability compared to conventional knives. The planer/thicknesser features cast‑iron tables sized 1290 × 310 mm (surface planer) and 540 × 310 mm (thicknesser), both highly wear‑resistant. Additionally, the machine offers fence angle adjustment from 90° to 45°, enabling precise angled milling. Precision and Performance Maximum planing depth Jointing mode: 3 mm Thicknessing mode: 4 mm Cutter-block rotational speed: 5,500 rpm Stable structure enables finishes ready for gluing, coating, or further processing. A reliable thicknesser for both serial production and smaller‑scale projects. Applications Ideal for: Professional carpentry and furniture workshops Prototyping labs and training centers Maintenance departments in industrial plants Technical schools and vocational institutions Standard Equipment Three‑knife cutter block Cast‑iron work tables Cutter head guard Ø100 mm chip extraction port Feed‑in switch and safety shutdown Optional Equipment Mobile trolley for the machine Chip‑extraction unit Technical Data Specification Value Surface‑planing table size 1,290 × 310 mm Thicknessing table size 540 × 310 mm Rodpfjw Ab Twjx An Ajt Cutter-block diameter 75 mm Cutter-block speed 5,500 rpm Number/dimensions of knives 3 knives / 310 × 25 × 2.5 mm Fence angle adjustment 90°–45° Chip outlet diameter 100 mm Max. thicknessing height 180 mm Max. cut depth: planing/thickness 3 mm / 4 mm Motor power (S1/S6) 2.2 kW / 2.6 kW Max. workpiece width 310 mm Gross weight 200 kg

Condition: new, Year of construction: 2026, The Cormak PT265 planer-thicknesser is a solid and well-thought-out design that offers great possibilities for adjustment and mechanical processing of both hard and soft wood. The adjustment itself is simple and changing the planer to a thicknesser takes a few seconds. The latest version of the machine with an innovative tabletop opening system: ❌ Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. ✔️ The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. ✔️ This solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Stable construction resistant to vibrations The weight of the machine up to 170 kg combined with wide cast iron grinded tops 265 mm guarantees great stability, which ensures safe work. The additional rubber feet used allow work without the slightest vibrations. VERSION with the most powerful engine with a total power of S6: 2.6kW The PT265 planer-thicknesser is distinguished by an exceptionally powerful engine with a total power of S6 2.6 kW (S1 2.2 kW). This is much more than competitive devices offer, which translates into greater efficiency and stability of work. A more powerful engine means stable work and ease of processing hard materials: Hardwood requires more force for processing. A strong engine will handle this without a problem. Trouble-free change of the planer to the thicknesser. Switching from the planer to the thicknesser function is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. - Smooth height adjustment of the tops with a scale. - The thicknessing table mounted centrally on the column has a knob for adjusting the setting up and down - Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Rjdpfx Anovxhzns Ajt Technical data: Knife shaft diameter [mm] 75 Knife shaft revolutions [rpm] 4000 Suction nozzle diameter [mm] 100 Swing ruler tilt angle [°] 0 - 45 Number of knives 3 Shaft length [mm] 262 Knife dimensions [mm] 2500x300x30 Maximum planer width [mm] 265 Maximum thicknesser width [mm] 265 Maximum planing height [mm] 180 Maximum thicknesser cutting depth [mm] 3 Maximum planer cutting depth [mm] 2.5 Thicknesser feed speed [m/min] 6 Fence size [mm] 700 x 150 Machine dimensions (length x width) [mm] 1080 x 269 Weight [kg] 170 Total engine power S6: 2.6 kW Power supply 400V

Condition: new, Year of construction: 2026, Planer-thicknesser – versatile woodworking machine A planer-thicknesser is a versatile woodworking tool that allows for flattening, thicknessing, and smoothing wood surfaces. Ideal for carpentry and furniture manufacturing, it enables precise planing, edge processing, board production, creation of joinery components, and preparation of materials for gluing. This is a stable machine equipped with a high-quality cast iron table, cutting knives for material removal, an electric motor, and convenient adjustments that make it easy to operate. Also known as a jointer, the planer-thicknesser is designed for initial processing of both rough and hard wood, as well as soft lumber. Its purpose is to level, smooth, and bring wood to the desired thickness through mechanical processes. It’s especially valuable in carpentry and furniture production, where precision and repeatability are essential. Stable construction with enhanced weight for vibration resistance The machine weighs 170 kg and features wide, ground cast iron tables (250 mm), ensuring excellent stability and safe operation. Additional rubber feet allow vibration-free operation. VERSION with a high-performance motor – Total power (S6): 2.6 kW The PT260 planer-thicknesser stands out with its exceptionally powerful motor: Total power (S6): 2.6 kW Continuous power (S1): 2.0 kW This is significantly more than what many competitor machines offer, translating into better performance and more stable operation. Stronger motor = better efficiency and easier processing of hardwoods. Hardwoods require more power to process, and this motor handles them with ease. Rsdpfowt Axpsx An Aet Effortless conversion from jointer to thicknesser Switching between jointer and thicknessing functions is quick and simple. It involves unlocking the eccentric clamps, lifting the tables, and repositioning the dust extraction hood. Precision and ease of adjustment Smooth table height adjustment with scale Central column-mounted thicknessing table with handwheel for height regulation 700x150 mm aluminum tilting fence with scale strip for accurate angle settings from 90° to 45° Technical Specifications: Parameter Value Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction port diameter 100 mm Tilting fence angle range 90° – 45° Number of knives 3 Knife dimensions 250x30x3 mm Table dimensions 1100x250 mm Thicknessing table dimensions 600x248 mm Max. planing width (jointer) 250 mm Max. planing depth (jointer) 5 mm Max. thicknessing depth (single pass) 2.5 mm Max. cutting depth (thicknesser) 3 mm Max. workpiece height (thicknesser) 180 mm Thicknesser feed rate 6 m/min Fence dimensions 700x150 mm Machine dimensions (L x W) 1100x250 mm Weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 400 V

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. The latest version of the machine with an innovative tabletop opening system: Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Rodpfx Aevxh A Sen Ajt Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Shaft length 250 mm Knife dimensions 250x30x3 mm Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V

Condition: new, Year of construction: 2026, The CORMAK PT310ET planer–thicknesser is an advanced woodworking machine that combines the functionality of a jointer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and features that increase precision and operator comfort, such as additional feed rollers integrated into the thicknessing table. Key Advantages S6 motor power: 2.8 kW (S1: 2.2 kW) – one of the most powerful in its class, ensuring consistent performance even under heavy loads. Stable 180 kg construction – rigid cast-iron tables and additional rubber-coated feet minimize vibrations and increase precision. Quick mode switching – fast change from jointer to thicknesser by lifting the tables and repositioning the chip-extraction hood. Smooth and quiet operation – low noise emission and accurate material feed ensure operator comfort and safety. Efficient extraction system – Ø120 mm outlet allows effective chip removal, especially during intensive use. Unique Benefit: Feed Rollers in the Thicknesser – specially designed auxiliary roller extensions integrated into the thicknessing table support the machining of long and heavy workpieces, making feeding and collecting easier while improving surface finish quality. Applications Carpentry and furniture workshops – for daily, efficient machining of solid wood and laminated boards. Production of structural components – ideal for flattening and calibrating construction elements, stairs, frames, and mouldings. Technical schools – for training in professional woodworking using high-quality industrial equipment. Standard Equipment Rsdpfx Asxy Hy Ujn Aet Three HSS knives, 310 × 25 × 3 mm Cutterhead guard Cast-iron jointer tables Ø120 mm dust-extraction outlet Feed switch and emergency STOP switch Operating manual (DTR) CE declaration of conformity Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 5500 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives / dimensions: 3 / 310 × 25 × 3 mm Maximum jointer width: 310 mm Maximum thicknesser width: 308 mm Planing height range: 5–225 mm Maximum depth of cut (thicknesser): 2.5 mm Maximum depth of cut (jointer): 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L × W): 1300 × 310 mm Gross weight: 180 kg Motor speed: 2800 rpm Motor power: S1: 2.2 kW / S6: 2.8 kW Power supply: 400 V, 5-pin socket, 16 A Manual (DTR): Polish/ English CE declaration: yes

Condition: new, functionality: fully functional, Year of construction: 2026, The FM230 extractor is characterized by small dimensions and at the same time high efficiency of up to 1000 m3/h. Standardly equipped with a metal rotor and a running base. Great value for money, which makes it an uncompromising device in its category. Many years of effort by our team resulted in the creation of a multi-patch metal impeller of the WhirlWind series, which, together with the massive metal casing, constitutes the heart of the extraction system. The vacuum air draft perfectly sucks excess sawdust generated during mechanical processing of wood, produced during machine operation. The massive construction of the extraction unit has been enriched with additional supports in the base to ensure stable and vibration-free operation of the device. The entire structure has been reinforced with appropriately thick supports that keep the chute cylinders and the weight of waste bags in the right position on a massive base. An additional advantage is the use of a flexible and durable gasket placed in a critical place to improve the tightness of the entire system. As standard, we equip the extractors with canvas bags (filter and waste) and additional disposable, durable plastic waste bags. Flexible metal bands ensure long-term trouble-free operation of bag replacement. The use of swivel and ball-bearing wheels ensures efficient movement of the extractor around the facility. Machine characteristics The perfect machine for both professionals and amateur carpenters. Optimum extraction performance works perfectly with machines such as: Rodovu Az Uepfx An Aet Planers Planers Thickness planers Milling machines Technical data ENGINE POWER 0.75 kW SUCTION PERFORMANCE 1000 m3/h VOLUME OF BAGS 60L NUMBER OF BAGS 2 DIAMETER OF SUCTION PIPE 100mm HEIGHT 1500mm WIDTH 420mm LENGTH 600mm VOLTAGE/FREQUENCY 230V WEIGHT 27kg

Condition: new, Year of construction: 2026, functionality: fully functional, All CORMAK company extractors feature easy operation and quick bag replacement. Wheeled base ensures portability. Extractor's quiet and failure-free operation is provided by a metal rotor. Affordable price with high efficiency. Metal balanced rotor ensures vibration-free and quiet operation Quick mounting of burlap extraction bag Portability due to 4-wheel base Stable metal construction Default equipment Metal wheeled base 4 burlap bags Optional equipment Galvanised clamping ring 2-micron filter cartridge Technical data Suction efficiency 3900 m3/h Bag capacity 220 L Rodsvu A Diepfx An Ast Number of bags 4 Extracting connector diameter 1×150, 3×100 mm Dimensions (L×W×H) 1200×570×2250 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400V User manual yes EC declaration yes

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Rjdpfxovu Ad Ao An Ajt Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg