Used Automatic Spray Booth for sale (24,302)

Year of construction: 2020, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro 2-XS from the premium manufacturer Rational (successor to the VCC 112T). The iVario Pro 2-XS is offered including the basic accessories and base unit. The Vario Cooking Center is in excellent condition, as it comes from a training kitchen. The unit is available from approximately week 35. The list price for this unit is: €11,980 net / €14,256.20 gross The list price for the base unit is: €1,227 net / €1,460.13 gross Our price: €7,500 net / €8,925 gross You will receive an invoice with VAT shown. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational device type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our equipment service for you: • 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating manuals, connection diagrams & spare parts • Inspection according to DGUV V3 Technical data: • W x D x H: 1100 x 756 x 485 mm • Power connection: V: 400 / kW: 13.7 / Hz: 50-60 • Serial number: E07VK20068047700 • Year of manufacture: 2020 • Capacity: 2 x 17 liters Additional included features: Itjdpfx Ahezvwqio Eol • iZone Control • Low-temperature cooking • Socket (Type F) • WiFi • Ethernet and USB interface Condition: Used, major inspection performed and fully functional Additional information: • Integrated spray hose with automatic retraction and spray dosage • High-quality pot base - seamless with rounded corners • Core temperature probe with 6 measuring points • 1,200 programs, each with up to 12 programmable and nameable steps • Integrated hose spray on the unit, integrated water drain in the pot • Temperature unit adjustable in °C or °F • Cooking pot can be tilted • Lid with integrated water inlet • Automatic display of service messages • IPX5 splash water protection • USB interface for HACCP data output and updates Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 1990, functionality: fully functional, For sale is a complete, fully operational powder coating system, year of manufacture 1990. Over the past few years, numerous system components have been modernized or completely replaced and upgraded. The system was decommissioned in Q1-2025, but can be reactivated and operated at any time if required. All components remain on standby and can be started up and demonstrated on site. Itodpsw Ek Ntsfx Ah Esl The system features one manual and two automatic spray booths (which can be operated simultaneously). The maximum workpiece dimensions that can be coated across all booths are 7000x2300x800 mm. The entire conveyor system is supplied by CSF. All system controls, including a visualization system, all control cabinets, all frequency inverters, as well as many other components have been completely renewed within the last 5–7 years. There is no maintenance backlog; the system has been regularly and meticulously serviced by our own maintenance department and the respective manufacturers. A detailed description can be provided upon request. Price on request!

Condition: refurbished (used), Year of construction: 2020, Dear customers, To ensure a fast and reliable response to your inquiry, we kindly ask you to contact us preferably via email. This allows us to directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! TSWi 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is integrated into the wall Airflow: 7,200 m³/h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Itedpefr T Eqofx Ah Eel Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Transition from square to round: 150 EUR net Paint stop filter mat clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear Customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWi 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H Fan is integrated into the wall Airflow: 10,800 m³/h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping rail (+180.00 EUR net) Options/Additional cost for: Transition from square to round: 150.00 EUR net Paint stop filter mat clamping rail: 180.00 EUR net Iodpefr T Emefx Ah Estl Side guide plates with hinges: 590.00 EUR net Images may vary. We would also be happy to offer you complete spray booths with air supply system, heat exchanger, air supply ceiling, piping, etc. Simply contact us.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWc 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H + Fan at the top Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat Clamping bar (+€180.00 net) Options/additional cost for: Paintstop filter mat clamping bar: €180.00 net Side guide plates with hinge: €590.00 net Itedpfx Aofn Nddoh Esl Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Itsdpfjxz Dqmjx Ah Eol Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm Itodpfoyyz Ebex Ah Ejl - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: new, Year of construction: 2025, total length: 7,500 mm, total height: 3,400 mm, total width: 3,800 mm, warranty duration: 12 months, inner dimension length: 7,000 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, 🧩 Custom-Built Solution This washing system is manufactured to order. We can customize dimensions, number of stages, heating power, pump configuration, and automation level according to your individual requirements. Isdpfx Aoxlziheh Estl 🟦 Automatic 5-Stage Washing Machine – Modern Surface Preparation System Modern, fully automatic spray washing system designed for surface preparation of steel and aluminium components before powder coating or other finishing processes. The unit features separate treatment chambers, each dedicated to a specific chemical stage, ensuring optimal cleaning and pretreatment quality for every material. Equipped with top transport rails, independent liquid circuits, and precise control of temperature and process time, this washing system offers high efficiency, repeatability, and low operator involvement. Perfect solution for manufacturers seeking a reliable, energy-efficient and fully automated cleaning system for metal parts. 🔹 Technical Specifications - Working chamber dimensions: 7000 × 1500 × 2200 mm (L × W × H) - Overall dimensions: 7500 × 3800 × 3400 mm - Top transport: 3 rails 60×60×4 - Non-through chamber design - 5-stage process - Independent closed liquid circuits - Washing via pressure pumps and spray nozzles (side and top) - 4 tanks: * 2 heated and thermally insulated (for chemicals) * 2 for water / demineralized water - Tank capacity: 2500 L each - Heating power: 2 × 36 kW (electric heaters) - Total electrical power: 90 kW - 5 pumps × 3.0 kW, alternating operation - Automatic transition between washing stages - Adjustable temperature and process time - Power supply: 400 V / 50 Hz 🔸 Features and Advantages - Precise and repeatable washing of steel and aluminium components - Separate chambers and liquid circuits – no cross contamination - Fully automatic control and stage switching - Adjustable temperature and time per stage - Thermally insulated tanks for energy efficiency - Can be integrated with coating or production lines

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR Itsdpfxjzh Ht Re Ah Esl This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2002, Cutting capacity: approximately 230 mm (round), 230 mm (square), 280 x 150 mm (flat material) Cutting speed: 15 – 110 m/min Miter cuts to the left: 45°/60° Automatic workpiece feed Hydraulic lowering Micro-spray system Itedpfx Ahsz Dk Rcj Eel Coolant system Workpiece clamping device Roller conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Ijdszx S D Ajpfx Ah Ejtl Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Year of construction: 2018, condition: ready for operation (used), table load: 35 kg, number of axes: 3, This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details. Isdpfx Ajz A T Rpjh Ejtl • Conveyor • Type: Overhead monorail conveyor (frequency inverter driven) • Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min) • Reciprocator (application axis) • Max vertical stroke: 2,200 mm (adjustable) • Vertical speed: 0.14 to 0.6 m/s (adjustable) • Positioning movement: Manual adjustment • Part capacity • Workpiece material: Metal • Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm • Gauge clearance (W x H): 300 x 2,200 mm • Max load: 35 kg per 800 mm hanger rack • Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min • Powder application system • Brand/Model: Nordson Encore LT • Reciprocators: 2x electronic reciprocators • Automatic guns: 4x automatic powder guns with individual control modules • Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning • Air velocity at openings: approx. 0.5 m/s • Line components and thermal equipment • Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves • Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans • Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan • Oven burners: BALTUR (Code 17080010 / BTG 15 5060HZ) • Max operating temperature: 180°C • Utilities and technical requirements • Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz • Total electrical power: 90 kW (approx. 80 kW line requirement) • Electrical consumption: ~80% (excluding application booth) • Heating fuel: Natural gas • Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery) • Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application) • Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet • Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage Additional equipment • 1x Manual powder gun with integrated rack control unit • 1x Complete sieving unit with 10 m feed hose • 1x 36 kg powder hopper • 1x Recovery venturi pump

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm Ijdpfx Ahjx Iggye Eotl

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Itsdpsv Sm Ruefx Ah Eol Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Year of construction: 2023, A labeling system with two rotary tables and a scissor roller conveyor is offered. 1) Fully automatic Küppersbusch wrap-around pressure-sensitive labeling machine, type: ETT 5000-V, version for cylindrical containers with 3-roller system for front and back labeling, rated output: approx. 1200containers/h, bottle travel direction: right/left, bottle diameter range: 40mm-80mm, conveyor length: approx. 2500mm, conveyor width: approx. 82mm, conveyor height: 800mm +/-100mm, Küppersbusch ETT 4301/200 label dispenser, backing paper width: 30mm-200mm, label roll core: 76mm, max. label roll outside diameter: 280mm. 2) Küppersbusch infeed rotary table: diameter: 1000mm, version with V2A stainless-steel tubular frame and plastic plate. 3) Küppersbusch accumulation rotary table, diameter: 1000mm, version with V2A stainless-steel tubular frame and wear-resistant, noise-damping plastic plate. In addition, a total of four rollers for different bottle formats are available. The support rods of the opposed rollers were shortened for processing bottles with spray heads. The system was used only in single-shift operation. The system is available from January 2027. Documentation available. An on-site inspection is possible. Isdpfx Aozv T Nboh Ejtl

Condition: new, Year of construction: 2025, - Mechanical structure capable of cutting aluminum profiles at angles between 22.5° and90° with high speed and quality - Precise mechanical structure offering automatic positioning for 22.5°, 45°, and 90° angles,and manual positioning for intermediate angles - Stress-relieved cast and welded parts to ensure constant high-speed precision - Profile fixing pistons - Right-hand profile support stand - Safety covers - Single-head operation - 7'' touch screen - Ethernet connection - Ø 550 mm saw - Coolant spray system Itodpfx Ahezuv Eco Ejl - Hydropneumatically controlled, adjustable saw feed rate

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Isdpfezzkthsx Ah Eotl Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: C116353, Equipment: CE marking, Reconditioned Production Ready！ Ref Code:1014 Emmegi Classic Magic Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Iedpfx Aoy U Tczjh Ejtl Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system Itodpjzy Hpiofx Ah Eol - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Year of construction: 2025, condition: as good as new (ex-display), The "RH S" spray cleaning system is a compact, space-saving, automatically operated cleaning system that meets high standards regarding cleaning, degreasing, and drying results. Ijdpfsgrm Dfsx Ah Eotl The parts can be cleaned with the goods basket in a stationary, pivoting/oscillating, or rotating position. The nozzle system – several nozzle bars on the long sides and end faces – is permanently mounted in the processing chamber. Basket dimensions: L x W x H 470 x 320 x 200 (h) mm 2 baskets can be washed in parallel (simultaneously) Maximum load weight: 100 kg Spray pressure (washing): 4 bar, circulation rate: 360 liters/min. Control system: Siemens S7-1200 with KTP700 touch panel Includes hot air drying (12 kW) Includes compressed air impulse blow-off Includes steam extraction Includes external cladding made of stainless steel Includes preparation for retrofitting an oil separator Includes bag filter for media maintenance Includes 2 stainless steel goods baskets 470 x 320 x 200h mm System dimensions: L x W x H 1,425 x 1,920 x 1,980 (h) mm Dimensions including the open loading door Connection value (electrical): approx. 25 kW

Condition: refurbished (used), Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. Ijdpefn Ndcofx Ah Estl We look forward to hearing from you and are happy to assist you! TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Clamping rail (+ EUR 150.00 net) Options/additional cost for: Paintstop filter mat clamping rail: EUR 150.00 net Side guide plates with hinges: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Ijdpofzq Stsfx Ah Eetl Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: new, Year of construction: 2024, RHS spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gearmotor (possibility of managing fixed-tilt-full rotation). - Siemens PLC - possibility of creating and managing washing recipes. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Thermal insulation of the entire system. - Magnetic/electronic control of correct door closure. - Level sensor / protection for too low level. - Automatic water filling. - Vapor aspirator. Available in various configurations with: - 50-100 micron bag filter. - Drying with fan and electric heaters. Ijderywyaopfx Ah Eotl - Oil separator - Emptying pump. Technical features: - Loading capacity: Single basket 670x480xh.400 mm or No. 2 450x300xh.200 mm. - Maximum allowable weight: 100 kg. - Tank volume: 400 Lt.

Condition: new, Year of construction: 2024, SM11 spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gear motor. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Electronic control of correct lid closure. - Level sensor / protection for too low level. - Tank drain with ball valve for bath change. Isdsrwmyhopfx Ah Ejtl Available in various configurations with: - Whole system thermal insulation. - 50-100 micron bag filter. - Vapor aspirator. - Drying with fan and electric heating elements. - Drying with high-pressure blower and air blade. - Oil separator. - Automatic water filling. - Emptying pump. Technical characteristics: - Basket diameter: ø1100 mm. - Internal useful height: 700 mm. - Maximum allowable weight: 250 kg. - Tank volume: 260 Lt.

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Iedpfxszuzt Ee Ah Eetl Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.