Used Aeg Contactor for sale (395)

Condition: good (used), Contactor, semiconductor contactor, contactor Dksdpfxsva Rque Ailsu -600 VAC 55 A -Quantity: 1 piece available -Weight: 1.8 kg

Condition: good (used), functionality: fully functional, Function-tested; item originates from dismantling of a system from an automotive supplier Manufacturer: Siemens Dkodpfx Aoyq Sbtsilju Model: 3TC5617-0A Type: Power Contactor Rated Voltage: 230 V AC Rated Operational Current: 40 A Frequency: 50/60 Hz Contacts: 3-pole (3 NO) Mounting: Screw or DIN rail mounting Function: Switching of motors, heaters, or industrial loads Series: Sirius

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Dsdpsrbzygjfx Aileku Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 350 A Cooled Power regulator Load supervision on analog outputs

Condition: good (used), electric motor, three-phase motor -Power: 32/46 kW -Speed: 730/1470 rpm -Shaft: Ø 55 mm -Design: B3 -Protection rating: IP55 Dksdpfx Astr R Ahjilsu -Quantity: 1x motor available -Dimensions: 970/630/H520 mm -Weight: 465 kg

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Dodpfx Ajyw Rzajileku Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: ready for operation (used), * Brand: Zippe / Aeg * Model: vibrating chute * Dim: length 4500 mm - width 400 mm, * Driving: two pieces vibration motors of each 1,5 kW * Stock: 1 piece. Dedpfeywmcyox Ailoku

Condition: used, functionality: unexamined, “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Djdpszhnyrofx Aileku More than 10 units available Manufacturer: Siemens Model: 3TC5617-0A Type: Power contactor Rated voltage: 230 V AC Rated operating current: 40 A Frequency: 50/60 Hz Contacts: 3-pole (3 normally closed) Mounting type: Screw or DIN rail mounting Function: Switching of motors, heaters, or industrial loads Series: Sirius

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner shredding mills in the C’s series (“C” stands for “compact,” “s” stands for “silent,” i.e., optimized for noise reduction) offer practical solutions for almost all challenges in the in-line recycling of sprues and defective parts in the production process. Thanks to the modular design, the shredding mills in the C’s series can be easily adapted to the specific application or the needs of the operation. Depending on the method of feeding the sprues, the disposal of the ground material, or the injection molding machine used, the C’s series from Wanner offers optimal solutions that can be adapted to your specific operating processes through a variety of standard components. The optimized cutting geometry and the low rotor speed guarantee high-quality ground material with a low dust content. Sound-insulated feed hoppers and the grinding chamber design, which is optimized in terms of structure-borne noise and natural frequency, contribute to a low noise level. The large-sized gearbox ensures a long service life for the shredding mills and also allows for extremely compact dimensions. The grinding chamber can be opened very easily with just a few steps, which saves time and thus costs, for example, during cleaning due to a color or material change. The advantages of the C’s series: easy adaptation to the specific application through a modular system compact design requires only a small footprint next to the injection molding machine robust, cast/steel housing that can be moved on swivel casters durable motor/gearbox unit for a long service life significantly reduced noise level thanks to a bevel-cutting rotor and a vibration-optimized grinding chamber design easy handling and simple cleaning the mill saves time and costs improved feed behavior of bulky sprues and ground parts due to optimal rotor geometry grinding chamber with hardened inserts for minimal wear with glass fiber reinforced materials high-quality and low-dust ground material thanks to the optimized cutting geometry. The rotating disc in the side wall reduces friction and thus heating and damage to the ground material. blades can be easily resharpened without a special device sound-insulated and tamper-proof feed hoppers Technical data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Dkedpfx Ajzc Nydsilju Throughput: 20-25 kg/h Screen aperture: 3-8 mm Voltage: 400 volts/50 Hz Extraction container: volume approx. 6 l Suitable for glass fiber reinforced materials as standard Control: Contactor control with overload protection switch electrically redundant system with self-monitoring safety relay acc. to EN 12012 5 m connection cable Weight: 155 kg Year of manufacture: 04/2019 Product video "We offer everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more articles - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Used Machine Year of Manufacture: 1976 Features and Technical Specifications: Dedpfezk Nyrjx Ailjku - Grinds from below - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure bar - Electric adjustment of tool thickness with an easy-to-read digital display - Pushbutton with contactor control - Grinding width: 1350 mm - Workpiece thickness: max. 150 mm - Grinding belt width: 1360 mm - Grinding belt length: 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Motor power: 17.5 kW Dimensions: 1800 x 1100 x 1520 mm Weight: 2600 kg Availability: Immediate Location: Röllbach

Condition: good (used), Heraeus Vötsch HC 4055 Temperature Testing Chamber Manufacturer: Heraeus Vötsch Type: HC 44055 Temperature chamber Temperature range: +180°C Rated voltage: 380V, +/-10%, 3/N, 50Hz Rated current: 13.5 A Rated power: 9 kW Housing dimensions: W 1065 x D 1560 x H 1890 (mm) Observation window: Width x Height 350 x 640 mm Dkodpfx Aeuuilvjilsu Test chamber: (L x D x H) approx. 800 x 795 x 855 mm Test chamber volume: 550 l Chamber is air-cooled Caution: Chamber can only be operated as an oven. Refrigeration circuit is empty and deactivated. Climate control system is deactivated. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Panel heater Semiconductor relay 21V4 Humidifier. Weight approx. 550 kg You can find more new and used items in our shop! International shipping costs upon request!

Condition: used, functionality: fully functional, Year of construction: 2012, Crimping machine Haeger 416 with base frame and accessories fully hydraulic, energy-saving drive for processing threaded fasteners up to approx. M6 (M8) Djdpfx Aijz Niahsleku nuts/threaded inserts and bolts, etc. patented operator safety system integrated storage option for tools and accessories in the base frame Technical data: Pressure range 1 to 36 kN Repeat accuracy +/- 1% Stroke rate 56/min at 25 mm stroke Overhang 406 mm Stroke length 0-150 mm, variable Drive power 1.5 kW Drive hydraulic Oil capacity 8 liters Power connection 230 V/50 Hz, single-phase Dimensions: Length 1140 mm Width 900 mm Height 840 mm + base frame 1000 mm

Condition: good (used), functionality: fully functional, “4 Pcs. AEG OA 1750 / 900 – AS – GY” for Sale Manufacturer: AEG Type: OA 1750 / 900 – AS – GY Dodpfsu Tkrasx Ailoku Size: 1.750 x 900 (750)mm Magnetic Vibrator: MV G (8 kW) / MV 400 (7 kW) Thyristor controller: Included Frame: With/Without With Stainless steel wear plate.

Condition: used, Year of construction: 1992, Used Machine Year of manufacture: 1992 Features and Technical Specifications: - Designed for small workshops, with 1 Combi unit for top-down sanding - Working width: 950 mm - Sanding belt dimensions: 970 mm wide, 1,700 mm long - 1 combined contact roller and sanding shoe unit, drive motor 7.5 kW, with contact roller rated at 85 Shore and a sanding shoe with felt pad and sliding coating - DFL veneer sanding unit - With workpiece-controlled air-cushion sanding shoe Dedpfx Aezy Dzceilsku - Protected sanding shoe storage inside the machine - Sanding belt drive with automatic star-delta start-up and maintenance-free, wear-free electric braking system - Additional storage for an extra sanding tongue - Safety shut-off when the door is opened - Pneumatic sanding belt tensioning device - Belt feed mechanism, driven by a worm gear motor, feed speeds of 4 and 8 m/min, and automatic control for belt travel - LED digital display for workpiece thickness adjustment - Safety shut-off at the machine inlet in case of excessive workpiece thickness - Indicator lights to show operational readiness - Optimally positioned dust extraction hood with connection (D=160 mm) for the sanding belt - Roller table at the inlet - Complete pneumatic control system, including automatic pressure switch, control and monitoring devices - All electrical switching elements—main switch, fuses, contactor control with motor protection relays, and display units—in VDE-compliant design - Total power consumption: approx. 9 kW - Operating voltage: 400 V, 50 Hz - Dimensions: approx. 1500 x 1650 x 2000 mm - Weight: approx. 1200 kg

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. Dkjdpfx Aiezfyu Aelsu CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 90387, overall weight: 1,500 kg, Kohler KRM 18.180/19 Precision Strip Straightening Machine with Double Decoiler Kohler Richttechnik precision roller straightening machine with a double decoiler, built in West Germany in 1990. The line is designed for straightening narrow steel strip, such as bandsaw blade material, and runs from left to right at up to 60 m/min. Strip speed is controlled automatically by a light curtain (loop control), so the decoiler and straightener stay synchronised. The straightener has 19 rolls of 18 mm diameter. Both roll stands are adjusted by motor, and a Kohler digital measuring unit with a keypad allows exact, repeatable roll positioning. The operator panel includes decoiler forward, reverse and stop, a speed potentiometer, key switches to open and close the straightening rolls, oil level control, motor temperature monitoring, and setup and automatic modes. TECHNICAL SPECIFICATIONS Manufacturer: Kohler Richttechnik Model: KRM 18.180/19 Serial number: 90388 Year of manufacture: 1990 Strip width: 180 mm (please verify; 120 mm per manual) Straightening rolls: 19 pcs, Ø 18 mm Max. straightenable cross-section: 250 mm² Working direction: left to right Dedpfx Aoz E Smheilsku Strip speed: 0–60 m/min, stepless Speed control: light curtain (loop control) Measuring system: digital, Kohler display with keypad Roll stand adjustment: motorised (2× SEW R302 DT71 D8/2, 0.06/0.25 kW) Entry guide: manual side adjustment Quick-change device: manual Main drive: Lenze GFQT 80-24, 4.2 kW at 3000 rpm Oil pump: AEG AM56 KY4, 0.06 kW Connected load: 6 kW Power supply: 380 V / 50 Hz Decoiler: double Documentation: original manual available Made in West Germany Condition: Complete and available for inspection under power. On stock more stamping eqipment from brands: Bruderer, bihler, mabu, Schaal, Soprem, Noxon, Huras...

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 Dedpfxoz Nmfbe Aileku • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included

Condition: excellent (used), Electric Hydraulic Pump Dkedpovzb Hvsfx Ailou - Power supply 380V - Capacity 7 liters of oil. - 25 Bar - Very good condition.

Condition: used, Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 200 LZ2 -Power: 37 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B3 Dodpfst Dri Nsx Ailoku -Dimensions: 735/480/H410mm -Weight: 288 kg

Condition: good (used), Central lubrication, oil circulation system, progressive pump, central lubrication unit, hydraulic unit, central lubrication, lubrication pump -Hydraulic unit: Central lubrication on mobile base frame -Hydraulic unit: AEG 0.25 kW 1430 rpm -Tank: with level indicator Dkodpfet Hmi Nex Ailou -Control: Schleicher -Individual components: see photos -Number: 3x lubrication unit available -Price per piece -Dimensions: 640/370/H720mm -Weight: 56 kg

Condition: used, Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 100A -Quantity: 2x power controllers available Dsdopcmtwepfx Ailjku -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg/pc.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: AEG, hydraulic unit from Krauss Maffei KM 250-1200 B injection molding machine -Motor: Bauknecht type AJ 225 MV4 Q4 55 kW / 1460 rpm -Individual components: see images -Dimensions: 1340/650/H760 mm Dkedjg Azptopfx Aileu -Weight: 557 kg

Condition: used, functionality: fully functional, machine/vehicle number: 1232, Jumberca SFJ single-face circular knitting machine, machine number 1232. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). NAMEPLATE DATA: · Diameter: 30 inches / 762 mm · Gauge: 20 · Number of needles: 1920 · Manufacturer: Jumberca S.A., Badalona, Spain APPLICATION: Single-face knitted fabrics: jersey, pique, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Memminger-IRO type TPF 20-G feeders with yarn stop · Memminger-IRO Pulsonic 3-Mini lubricator · Hengstler counters · Complete upper cam set · Electrical panel with LOYJE 13.220 contactors and transformers · Drive system with pulleys and mechanical variable speed drive Dsdpfx Aijzvh D Hsloku CONDITION: Complete machine, fully assembled. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: good (used), electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 100 LT6 -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Protection rating: IP54 -Design: B3 -Dimensions: 365/250/H210 mm Dkedpfoy D Ikxox Ailsu -Weight: 23 kg

Condition: like new (used), 100 Pcs. Feeders with Magnetic Vibrators and Unbalance Motors. Find our complete stock on our website. Different widths and lengths. With different vibrators from quality manufacturers like Aviteq / AEG, Jöst, Friedrich, UHDE, Vibra, Honert, Herweg. Also in stainless steel or for example covered with ceramic or rubber. Dedpoggfizefx Ailoku Please contact us to find a suitable feeder for you.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Dodpfx Aezyc Rioiloku The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.