Used Mackey Bowley Hydraulic Press 100Tonnes Capacity, for sale (50,655)

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Dwodpfxjx Ehlce Albob

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Dwjdeup Skwopfx Albsb Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg ADVANTAGES – very good condition – used press – original paint (not repainted) Djdpfxjzmfvuj Albswb – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Dwodjdzp Tcopfx Albob Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Dsdoudph Ispfx Albowb

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Dwedpfey Ampdsx Albob Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Year of construction: 2006, condition: excellent (used), • MASA R9001XL single-feed vibro press, year 2006 • Feeder to the stacking elevator • Stacking elevator • Multi-fork trolley Liftmobil II • Destacking elevator • Curing chamber (shelving) for 4,200 pallets Dsdpfx Aeylg D Eelbswb • Centering device • Feeder to grab • Packing/grabbing clamp • Cleaning brush • Pallet oiling system • Pallet turning device (turntable) • Pallet storage for 20 pcs • Return feeder to vibro press • Roller conveyor for finished pallets • Leng Pac wrapping machine • Leng Pan top foil application • Hydraulic station • Container with electrical control panel • Atlas Copco compressor • Production pallets 1200x1100 mm – approx. 4,000 pcs • Haarup 4500 planetary mixer • Mixer frame/structure • Input hopper with hoist • Cement scale, capacity 1900 kg • Water scale, capacity 1500 L • Conveyor belt to vibro press • Cement feeder • Automatic controls

Year of construction: 2001, condition: good (used), Offer 20202 Dwjdpfx Alop Dt Taobjb Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Djdozvfp Hjpfx Albewb Motor power: 3 kW

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Dwedogrki Sspfx Albeb Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Dsdetzwxdjpfx Albjwb Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: used, Year of construction: 1992, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, installation height: 700 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Dwodpfx Aoup Si Helbjb Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: used, Year of construction: 2008, Hesse E 2040 - Hydraulic press brake - Cybelec DU 6000 CNC control system Dwodpfx Aozl Tkdelbsb - 3 controlled axes (Y1, Y2, X) - manual Wila crowning table - 2 adjustable support arms - light barriers - incl. bending tools & operating manual - year of manufacture 2008 Technical data - Press capacity: 40 t - Bending length: 2050 mm - Distance between uprights: 1650 mm - Rapid traverse: 150 mm/s - Bending speed: 15 mm/s - Retraction speed: 100 mm/s - Stroke: 160 mm - Overhang: 350 mm - Motor power: 4 kW - Operating voltage: 3x 400 V - Oil tank capacity: 60 l - Machine dimensions WxHxD: 2800 x 2400 x 1600 mm - Weight: 4060 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Dedpfxsvbdpys Albowb Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use Dedjxaabfjpfx Albowb - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Year of construction: 2007, condition: ready for operation (used), overall weight: 11,000 kg, total height: 2,850 mm, product length (max.): 4,550 mm, number of axes: 4, General Data Machine weight 11000 kg Measurements height 2850 mm Dimensions Machine Length 4550 mm Main Drive Number of axis 4 Bending length 3100 mm Dwedpfxsx D Dius Albob This 4-axis ERMAK CNC HAP 3100x200 was manufactured in 2007. A robust hydraulic press with a press capacity of 200 tons and a bending length of 3100 mm. It operates with an Ermak ER70 CNC control system and has a motor power of 15 kW. Ideal for heavy-duty bending tasks. Machine dimensions are 4550 × 2250 × 2850 mm, weighing 11,000 kg. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 1990, Press force: 200 t Stroke: 300 mm Frame width: 1400 mm Side frame opening: 770 mm Shut height (stroke up): 500 mm Table area: 1300 x 1100 mm Cushion force in table: 80 t Cushion stroke in table: 150 mm Cushion area in table: 700 x 700 mm Table height above floor: 930 mm Dwjdpfezypkvjx Albsb

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Djdpovbdyfjfx Albjwb Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: used, Year of construction: 1980, Press force: 250 t Stroke: 250 mm Frame width: 1125 mm Side frame opening: 700 mm Shut height (stroke up): 800 mm Table area: 1100 x 900 mm Cushion force in table: 63 t Cushion stroke in table: 100 mm Dedozyl Hajpfx Albswb Cushion area in table: 700 x 400 mm Table height above floor: 960 mm

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1354.18, functionality: fully functional, operating hours: 8,000 h, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 300 mm, operating speed: 60 mm/s, table width: 550 mm, table length: 400 mm, total height: 20,000 mm, overall weight: 2,500 kg, installation height: 500 mm, Technical data: Pressing force 30 t Stroke 300 mm Installation height 500 mm Fold-through hole in table 120 mm Front passage 550 mm Usable table depth 400 mm Usable table width 550 mm Speed from 60 mm/sec. Speed up to 180 mm/sec. Hydraulic oil tank capacity 400 l Drive power 7.5 kW External dimensions L x W x D 1200 x 2000 x 2600 mm Weight 2.5 t With - 2-hand release - light barrier Dwodpfjtrd Ubex Albob - safety cage - Infinitely variable pressure control, preselection with digital display - Infinitely variable speed control - 8000 switch-on hours - CE marking - complies with UVV

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Dwodpfx Alew A Amrjbob Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: good (used), Storage location: 3125 Manufacturer: WMW Zeulenroda Machine number: 052/04/16 Type / Model: PYE10SS Pressing force: 10 t Table area: 500 x 400 mm Ram plate: 360 x 275 mm Overhang: 255 mm Through-hole: 140 mm Max. distance between table and ram: 650 mm Stroke: 400 mm Downward speed: 200 mm/s Upward speed: 450 mm/s Connection: 4.5 kW Dwedpfezl Dnaex Albeb Accessories / Equipment: Condition: good Weight: 1.5 t Dimensions: 900 x 1,400 x 2,400 mm

Condition: good (used), Manufacturer: MÜLLER Tip: SDZ 63t Table surface: 620x500mm Djdpfx Alon D Eiaobowb Pressure: 63 t

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 Dsdpfx Aezn Afvolbowb GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1993 description TYPE HYDRAULIC UPSTROKING Dwjdpfxspygyds Albsb BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST