Used Kern Kern Pcb 250-3 Balance for sale (69,976)

Condition: used, Year of construction: 2020, operating hours: 780 h, MS01 Quick Coupler Rubber tracks Edition B 1.0 Hfodjz Ht A Tspfx Ag Een Short bucket arm

Condition: ready for operation (used), Heidenhain UM 121 ID: 325 003-01 SN: 7812529, professionally and completely overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In this case, an additional charge of €500 including VAT will be applied. Hsdsz Hibxepfx Ag Eefn Attention: You are bidding on a Heidenhain UM 121 inverter (ID: 325 003-01, SN: 7812529) as part of an exchange service. It has been professionally and completely overhauled and tested and comes with a 3-month warranty. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €500 including VAT will be issued.

Condition: good (used), functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, empty load weight: 2,809 kg, Year of construction: 2012, operating hours: 4,340 h, Equipment: additional headlights, rubber tracks, Mini excavator Wacker Neuson 28Z3 Year of manufacture: 2012 According to the hour meter: 4,340 hours 15.2 kW 2,809 kg - Power tilt - Hydraulic quick coupler - Ditch bucket - Deep excavation bucket - Additional hydraulic circuit - Cabin with heater - Work lights - Ready for immediate use Hsdpjz Iwvtsfx Ag Eofn - Original paint Selling price: €19,500 net Affordable delivery also possible!

Condition: ready for operation (used), Sensor cable/interface cable, length 6.3 m, with 2 Honda MR-20L connectors, 20-pin, for Fanuc. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Hjdpfxoz Dnyzs Ag Eefn

Condition: ready for operation (used), Year of construction: 2006, clamping force: 2,500 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details. • Tie-bar spacing (space between columns): 630 x 630 mm • Maximum mold height: 900 mm Hfjdjz Dal Aopfx Ag Een • Minimum mold height: 300 mm • Maximum injection volume: 195 / 140 cm³ (for 45 / 35 mm screw) • Maximum injection pressure: 2,470 bar • Centering ring: 160 mm • Hot runner control: 3 zones • Core puller: 1 Additional equipment • Robot: Arburg Multilift H • 2x Moretto electric loader, Safety cage, Conveyor belt, Rotary table • 2x dryers with intake ducts are available for extra 1000€

Condition: good (used), functionality: fully functional, Year of construction: 2022, operating hours: 918 h, machine/vehicle number: WNCE1601L00001116, Rubber tracks Work lights, front/rear Standard bucket arm Dozer blade Advanced overload warning system Ballast weight Preparation for Powertilt Preparation for Easy Lock / AUX IV Hfedpfxsz Nh Eco Ag Esn Control circuit for grapple / AUX V Lehnhoff Powertilt HS03H PTS050 DL 1 ditching bucket

Condition: excellent (used), Catalog number 7445 TECHNICAL DATA - track width 250mm - roller width 400mm - max. blade diameter 400mm - blade bore diameter 80mm - max. cutting height 140mm - table width with clearance 730mm - table length 2120mm *from above: - pawls - smooth pressure roller - pawls - smooth pressure roller - saw arbor - 2 smooth pressure rollers from below: - guide - smooth sliding roller - pawls - track - central lubrication - 2 lasers - stepless feed rate adjustment - feed motor 1.1kW - main motor 37kW - electric body lifting 0.75kW - electric saw arbor lifting 0.75kW - dust extraction nozzle diameter 200mm Hfedpfxjzx Rnts Ag Esn - overall dimensions L/W/H 2200x1850x2100mm - weight approx. 3000kg ADVANTAGES - German production - laser - electric body and arbor lifting - stepless feed rate adjustment - multi-blade saw, used, very good condition Net price: 109900 PLN Net price: 25558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 930135, color channels: 8 couleurs + blanc, year of last overhaul: 2026, Equipment: documentation/manual, We are selling an industrial printer in very good condition. The machine is covered by a service contract and is properly maintained. We primarily use this printer for printing banners, vinyl, paper, and, of course, all rigid materials such as Forex, Dibond, corrugated board, etc. We can operate the printer in 4-color mode (fast mode) or using 8 colors for high-quality prints. Hfjdpfxoz R Tuyj Ag Esn The printer is located in Belgium and is available for a demonstration at any time.

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Hfsdpoq Izpnefx Ag Een Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2017, condition: excellent (used), machine/vehicle number: DN-SS-250-1000A, Telemecanique / Schneider Canalis KSA - Busbar System Type KSA, 5-pole - L1 L2 L3 N PE Current stock: 250A - approx. 100m 400A - approx. 400m 630A - approx. 60m 1000A - approx. 110m Voltage Ui max. 690V, Frequency 50 - 60 Hz Busbar lengths available, predominantly 5m and 3m Hsdez E Dchepfx Ag Esfn Price per meter from 125 Euros incl. connectors and supports Feeder boxes, end pieces, and tap-off boxes 16-32-63A are available as optional extras (Other tap-off boxes 125 - 160 - 250 - 400A available upon request) The dismantling was carried out by a qualified electrician. Busbars are in TOP condition!!!! Please inquire about the desired lengths or accessories! In stock, immediately available!!! We also have the Kloeckner Moeller BD1 system in stock! (Busbars, corner pieces, feeders, and tap-off boxes) Please inquire! Are you also looking for a crane system?

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, Hedpfx Agez Snc Io Ejfn * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Stand in galvanized - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 250 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Hfedpfx Asz Sq Dysg Esn Price : 1280,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), For sale: Mannesmann Demag S040-B5-21-3 geared motor with a three-phase UMF71BX-6-Z motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good, with normal signs of wear and tear from use. The robust gearbox and reliable motor make this geared motor ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: Mannesmann Demag Gearbox type: S040-B5-21-3/ Hfedpfjz Snn Hjx Ag Eon Motor type: UMF71BX-6-Z Motor power: 0.25 kW Power supply: 3× 220/380 V, 50 Hz Motor speed: 890 rpm Output speed: approx. 64 rpm Gear ratio: i = 14 Current: 1.56 / 0.90 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Lubrication: synthetic oil Country of manufacture: Germany

Condition: excellent (used), For sale: Professional KLN Ultraschall / MECASONIC OMEGA 3 MCA ultrasonic welding machine – an industrial system for precision joining of plastics. The device is designed for use in: - Serial production - Automotive industry - Electronics and medical sectors - Welding plastic components (e.g. housings, blisters) ⚙️ Specification: Manufacturer: KLN Ultraschall (Crest Group) / MECASONIC Model: OMEGA 3 MCA Type: Ultrasonic welding system Year of tooling production: 2011 Control: MCA digital control panel Cycle counter: approx. 23,000 Two-hand safety start system (operator safety) Industrial power supply 📦 Included in the set: - Complete welding unit - MECASONIC MCA controller - Work table with tooling (mould / fixture – "Blister") - Pneumatic installation (visible in the photos) - Cabling 📊 Condition: - Used device - Visually in very good condition - Normal signs of use (as seen in the photos) - Machine powers up – control panel operates - No complete production testing performed 📄 Additional information: - Cycle counter visible on display Hfsdpfxsz Smn Nj Ag Eon - Safety instructions (DE) on the housing - Robust industrial construction ✅ Advantages: - High welding precision - Fast process (ultrasonic) - Reliable industrial technology - Ready for integration or standalone operation - Reputable manufacturers (KLN / MECASONIC) 🚚 Shipping: - Pallet shipping - Personal collection possible - International shipping available

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Hfodoz Spgpopfx Ag Een Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: good (used), For sale: a used Hidrostal industrial submersible pump, complete with cables, float switch, control module, and a metal discharge pipe terminated with a Storz-type coupling. The pump has a transport handle and a wide base for stable positioning. Data read from the nameplate: Manufacturer: Hidrostal Type designation: Hidrostal C0CQ-L01 + CNBA2-GXEQ 3 kW with control – the remaining part of the designation is unreadable. Motor number: 116322 Output power P2: 3 kW Input power P1: 3.8 kW Supply: 380–420 V, three-phase Frequency: 50 Hz Rated current: 6.4 A Rotational speed: 2730 rpm Power factor cos φ: 0.86 Hfedpfoz Spi Rox Ag Een Winding connection: delta (Δ) Insulation class: F Maximum ambient temperature: 40°C Marking on the nameplate: EEx d IIB T4 ATEX marking number: 99 ATEX 1079 Included equipment: Pump with motor. Power and control cables. Control module with indicators. CEE power plug. Float switch. Metal discharge pipe with Storz-type coupling. Base and transport handle.

Condition: new, 10x25m storage platform, load: 500kg/sqm lower edge: 3.0m, approx. 250sqm system platform Data : - Length : approx. 10m - Width : approx. 25m - Lower edge of platform : approx. 3.0 m - Top edge of stage : approx. 3.38 m - Total area : approx. 250 sqm - Load : 500 kg / sqm - Covering : 38 mm chipboard P6, top natural, bottom white. - Support grid : 5.0m x 4.15m - NO CROSSES, bracing with dome brace. - New ex works plus freight depending on zip code. Scope of delivery : - 020 x C profile 4150 mm , sendzimir galvanized . - 004 x C profile 4250 mm , sendzimir galvanized . - 066 x S profile 4800 mm , sendzimir galvanized . - 021 x Support 3000 mm , RAL 7016 . - 004 x Strut brace 3049 mm , RAL7016 . - 0116 x Clamping plate 2400 x 1000 x 38 mm natural/white P6 . - 021 x Lining plates for supports . - 021 x Set of dowels for supports . OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Price : 26.487 € net plus statutory VAT. You will receive an invoice with VAT shown. Hedpfx Agjz Sytqj Eofn Optional on request : - collision protection - railing - Transfer station - Stairs - ground anchor - Steel construction can be coated in any RAL color. (Standard RAL7016) Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: ready for operation (used), LAIPPLE / KEB M63L / 4a-SO, serial number: L113063970025005, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Hodpfx Aji D I D Neg Esfn

Condition: new, machine/vehicle number: 20260202003, fuel type: diesel, motor manufacturer: Perkins 4008TAG3, General information Hodpfx Agex Nl A No Eofn Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 7.970 kg Functional Generator capacity: 1.250 kVA Dimensions of cargo space: 455 x 205 x 244 cm CE mark: yes Other information Fuel consumption: 188 Liter / Hour at 75% Load Generator: Leroy Somer 50.2 M6 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 1450 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Festo DGSL-12-50-Y3A mini slide, 543979, unused in sealed original packaging, 100% functional, scope of delivery as shown in the photos. Hsdpfx Agsi D U Iuj Esfn

Condition: new, Balance System 9NDRAEA0046000, Serial No.: B512867, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Hsdpfxoi D T A Rs Ag Esfn

Condition: new, Kontron CP603 PC board, serial number: 248072028, unused, 100% functional, scope of delivery as shown in the photos. Hodpfx Agsi Ebwps Esfn

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. Hjdpfx Agez Synze Esfn - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Year of construction: 1991, condition: good (used), machine/vehicle number: RS100/9 + RS101-6, Technical data: 1 Zasche / Demag GSX250-3/3.25 pillar jib crane NL 250 KG Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 3.45m, UK boom: approx. 3.25m Reach: approx. 3m, hook height: approx. 2.85m Total weight approx. 500 kg including dowel plate 75x75cm Hfedpfxsvzkzpo Ag Een with Demag chain hoist 250KG payload Connection to 400V 16A, swivel range 270° Test book is available Crane is dismantled and immediately available Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale Used condition, see pictures Shipping by freight forwarder or collection by appointment

Condition: excellent (used), Carbide saw grinder VOLLMER model CHD250R2 with 3 stations loader VOLLMER model ND230 Hfjdpeipqztofx Ag Esn