Used Kasto - Vollautomat Bandsaw - Horizontal for sale (6,912)

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm Nedpfx Afjt Eacgo Sjwl band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, neu ca. 10 Wochen ab Auftrags Nedpfx Afeynmqwj Sewl Italien 11070 € 212.54 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 280 mm 240 mm 420x200 mm rund 260 mm, quadrat 240 rund 170 mm, quadrat 160 rund 200 mm, quadrat 180 830 mm 1600 mm 1400 mm 1800 mm 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: ready for operation (used), Year of construction: 2012, KASTO U 10 / Metal circular saw with material support -CE marking -Year of manufacture 2012 -Cutting range / Round 90 degrees / 100x100mm -Cutting range / Flat 90 degrees / 90x90mm Nwodjzakq Espfx Af Sjl -Cutting range / Square 90 degrees / 170x90mm -Miter cutting device -Coolant system -Vise with counter-tension device for burr-free cutting -Infinitely adjustable saw feed -2 saw cutting speeds -Dimensions of circular saw blade 350x2.5x32mm -Saw motor 1.8 kW Dimensions: L x W x H 1.2 x 0.8 x 1.9 meters / Weight 500 kg Errors and omissions excepted.

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 750 mm cutting width 170 x 310 mm Njdpspam E Rjfx Af Sswl cutting speed 25 - 90 m/min 130 mm 130 mm 205 mm Impact energy 205 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Nsdpfov S E Edjx Af Sjwl

Year of construction: 2020, condition: as good as new (ex-display), Bandsaw machine Manufacturer: KASTO Model: micut P 2.6 Year of manufacture: 2020 - Demonstration machine Machine no.: 6151 101 006 With warranty Nwjdpedur E Aefx Af Ssl Standard equipment includes: - Stepless cutting speed 20 - 110 m/min - Horizontal clamping device, manual tensioning - Stepless miter adjustment (-45° to +60°) - Stepless saw blade arm adjustment - Adjustable saw feed via self-weight - Cutting guide as material support - Automatic shutdown after cut completion - Coolant system - Operating manual With the following options: - Drip oiler

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm Nwodpfjfg E Hlsx Af Sjl total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 0 - 90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 230 Volt total power requirement 1,5 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double-miter band saw - Variable speed control - Miter cuts up to 60° left and 45° right - Vise with quick-clamping mechanism - Blade tension monitoring - Automatic electric cooling system Nwjdpfozlkv Rsx Af Sjl

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 330 mm 400 x 310 saw band length 3820 x 34 x 1,1 mm band speed 22 - 88 m/min table height 930 mm total power requirement 2,2 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut Nsdpfxowinyko Af Sjwl 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, cutting diameter 225 mm dimensions of saw-band 2480 x 27 x 0,9 mm table height 935 mm cutting speed 45 + 90 m/min 225 mm 145 mm 90 mm 150 x 245 mm 190 x 150 mm capacity 60 degrees: flat 120 x 90 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 1380 x 580 x 930 mm - With an output of 1100 watts, the device is ideal for processing hard types Njdpfxsfb Nbdo Af Sewl of metal. - Thanks to the emergency stop and automatic switch-off, you can work safely - The low-noise electric motor ensures a quiet working atmosphere - Comfortable buttons guarantee pleasant operation of the device.

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 + 70 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! Nsdpfjd Iip Nsx Af Sjwl Double miter metal band saw with: - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, cutting diameter 550 mm saw band length 6850 x 41 mm cutting width 1,3 mm Control Halbautomatisch Cutting area - square 550 x 550 mm Cutting area - flat 550 x 700 mm total power requirement 4 kW / 1580 Nm kW weight of the machine ca. 3775 kg dimensions of the machine ca. 1850 x 1500 x 3450 m TThe KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System Nsdpfjymf S Dsx Af Sswl The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, cutting diameter 650 mm saw band length 7730 x 54 mm cutting width 1,3 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 750 total power requirement 5,5 kW / 750 Nm weight of the machine ca. 4550 kg dimensions of the machine ca. 2100 x 1550 x 3900 mm The KSY 650 x 1050 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale Nwjdpfx Asyk Ih Ajf Sel image of the machine.

Condition: new, cutting diameter 227 mm saw band length 2455 mm table height 840 mm cutting width 260 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2455 x 27 x 0,9 mm capacity 90 degrees: round 227 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 260 x 220 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 45 degrees: flat 200 x 220 mm total power requirement 1,5 kW weight of the machine ca. 0,25 t dimensions of the machine ca. 0,8 x 1,4 x 1,5 m Miter band saw - automatic cut - Base frame - Coolant pump - Chip brush for cleaning the saw band - Vise with quick adjustment Nwedpfx Afsfgyh Ej Sjl

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 700 mm cutting width 250 x 320 mm cutting speed 25 - 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 120 mm 120 mm 190 mm Impact energy 190 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material Nwodpfxjff Efro Af Sol - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards Nodpefgyicofx Af Sewl · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing Nedpfx Aefg E Iasf Sjwl and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration Nodpsfgyh Uefx Af Sswl • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Year of construction: 2025, cutting diameter 280 mm Nodpfxjyk Ii Hj Af Sowl saw band length 3660 x 27 mm cutting width 0,9 mm capacity 90 degrees: square 270 x 270 mm capacity 90 degrees: flat 210 x 330 mm total power requirement 1,5 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1350 x 2250 x 1860 mm The GERD WOLFF KMS 280 is a precision servo-driven bandsaw designed for consistently accurate cutting.

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm Nwodpfxehpktvj Af Ssl 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. Nwodpfx Afsfn Ande Sjl • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Nedpfx Asfg E H Rsf Sswl Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm Nwodpefg E H Isfx Af Sol table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Nwedpfx Afsfg E H Te Ssl Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Nwodpfx Asfg E H Uef Sjl Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.