Used Fruittech Flash Pasteurizer (Kze) / Pasteurizer for sale (787)

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 10038587, Pasteurizer PA500-RWT-Gas Used Dcedpfx Akjtpcm Isceg Subject to prior sale!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, PASTEURIZER machine for sale. Manufacturer: Tomo Varga d.o.o. Year of manufacture: 2016. The machine is in working condition and ready for operation after reassembly. Detailed information about the machine: The pasteurization chamber reaches an operating temperature of 85 to 100°C. Batch filling in carts 850x900x1350 mm, which can be carried into the chamber with a forklift and stacked on top of each other. Pasteurization is done with direct steam. The flow of steam inside the chamber is directed by a 5 KW fan. Regulation of temperature and pasteurization time from 60 to 100°C. Wall and door insulation 150 mm thick. The chamber is made of stainless-steel sheet AIS I304. Capacity 1056 polypropylene bottles of 1.5 l. The dimension of the whole machine is 270 x 300 cm It also has a smaller electrical cabinet but that can stand separate (see picture called external electric cabinet) Dcodpfx Akswp E Hnscog Included with the device: 4X carts for inserting products into the chamber and an electrical cabinet with control panel (Touch screen) The device is disassembled for transport and can be viewed in this condition at the following location: Posavska ulica 59, 10372 Oborovo (Glazir d.o.o.). Working hours: Monday - Friday (from 08:00 to 14:00). For additional information, please contact via phone number listed or email for company GLAZIR d.o.o.

Condition: new, Water content 35 l Material 1.4301 / AISI 304 Weight 150 kg Height 1 400 mm Width 500 mm Length 750 mm Dcjdpfx Asd Hrpmskceg Electrical protection 50 A Connected load 400V 50Hz (3 phases) Electrical power 27 kW Nominal rating l/h 300 l/h

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 6,100 mm, total length: 1,550 mm, total height: 2,350 mm, overall weight: 1,800 kg, warranty duration: 6 months, power: 3 kW (4.08 HP), input voltage: 400 V, Sarp Line for pasteurization of stuffed pasta - Hourly output from 250 to 400 kg. The line consists of the following units: 1) Pasteurizer feeding conveyor belts. 2) Pasteurizer model SPA610VD, electric power 1.2 kW, heat output 120400 cal/h (140 kW), belt width mm. 1000, pasteurization tank length mm. 6000, overall dimensions mm. 10163 x 1600 x 2210 (h), total weight Kg. 1000 3) Belt elevator model SNZ 4) Wrapper - Cooler model SIR4105-A 5) Complete electrical cabinet The line is constructed entirely of stainless steel and has the following features: - width of the belts mm. 1000 - pasteurization belt speed adjustable from 1 to 3.3 meters / minute - wrapping belt speed adjustable from 0.65 to 1.95 meters / minute - cooling belt speed adjustable from 0.43 to 1.3 meters / minute - pasteurization chamber temperature from 96 to 99° C - internal temperature of the wrapper from 65 to 70° C - internal temperature of the cooler +3° C - pasteurization time from 1'50" to 5'30" - wrapping time from 3'40" to 10'55" - cooling time from 7'58" to 24' Djdsui Rixjpfx Akcecg A steam generator suitable for this line is available but not included in the price listed. Electrical system 220 / 400 V - 3 phase - 50 / 60 Hz., fully serviced, guaranteed 1 year, CE and USDA compliant. 1 year warranty !!! WHY BUY FROM A DEALER ?!! BUY DIRECTLY FROM THE MANUFACTURER !!! For more information, contact Ostoni in Italy ! WE HAVE THE LARGEST ONLINE SELECTION OF MACHINES AND MOLDS FOR THE PRODUCTION OF RAVIOLI, TORTELLINI, CAPPELLETTI, TORTELLONI, GNOCCHI, PELMENI, PIEROGI, VARENIKI AND MANY OTHER PASTA SHAPES !!!

Condition: used, functionality: fully functional, Vertical Honing Machine WMW VEB SZS 200x1000 C – in good working condition, under power For sale: vertical honing machine from the well-known German manufacturer VEB Werkzeugmaschinenkombinat, model SZS 200x1000 C. The machine is in good technical condition, connected to power and ready for inspection. Suitable for precise machining of cylindrical bores. Condition and availability Condition: used, NOT under power Availability: immediately available Dedpfjyy N Drsx Akcecg Technical specifications Max honing length: 1000 mm Max honing diameter: 200 mm Additional information Assistance with transport can be arranged

Condition: excellent (used), Tul-Kelch tool rack SK 40 Tool holder SK 40 Dcedpfey I T S Nox Akceg 48 slots for SK 40 tools Width 900 mm Depth 450 mm Height 1090 mm

Condition: good (used), amount 42 STK - Various KOMET tool holders, partly holder with ABS connection - including tightening bolts (41 pcs.) and various other tool holders, including storage and transport trolley Dsdpfxoy H Nzds Akcjcg transport trolley Year of manufacture: unknown

Condition: used, diameter div. number 44x Djdpfxjxyzxfs Akcjcg tool adaptor SK 40

Condition: used, diameter div. number 36x Dedpfx Aoww Nb Eokcscg tool adaptor BT 40

Condition: used, diameter div. Dcodpfx Aoww Nbxskceg number 40x tool adaptor BT 40

Condition: used, diameter div. number 40x tool adaptor BT 40 Dsdpfeww Nbfsx Akcjcg

Condition: used, diameter div. number 56x tool adaptor BT 40 Djdpfx Aswtrzyjkcscg

Condition: used, diameter div. number 16x Dsdpfjwtrztsx Akcocg tool adaptor SK 50 Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: used, diameter div. Dcodpfxowtrzge Akcsg number 36x tool adaptor SK 40

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. Dcsdpfjw Rv Taox Akcjg *

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Dedpfxjy Ah Rce Akcjcg Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Gardner Denver G-BH1 2BH1800, overall weight: 525 kg, power: 6.5 kW (8.84 HP), input voltage: 400 V, Atoom Flashcut automatic cutting machine, model 222, 400V, 6.5 kW, for leather and synthetic materials, 525 kg, cutting area 100 x 60 cm, overall dimensions 164.5 x 123 x 192 cm (height), vacuum pump Gardner Denver model G-BH1 2BH1800-7AH06, in operation Dcjdpjy D Ib Rjfx Akcsg

Condition: excellent (used), functionality: fully functional, Fixed tool holders Machine: MORI SEIKI SL2000 Turret manufacturer: SAUTER ---- 2x→ No. 444-119 Turning Tool Holder 25 mm steel holder Fixed turning tool holder Price: on request ----- 1x→ No. 444-201 Double Turning Tool Holder for main spindle and sub spindle with 1x clamping bar for 25 mm tool steels Fixed turning tool holder Price: on request Dsdpfxsynb E Ns Akcjcg ----- 1x→ No. 444-210 Boring Bar Holder Cylindrical mount ø 32 mm second mount ø 32 mm; 57 mm to the rear Price: on request ----- 1x→ No. 444-205 Turning Holder Mount 25 mm steel holder Price: on request

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 700 h, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, coolant supply: 80 bar, rapid traverse Z-axis: 120 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 120 m/min, rotational speed (max.): 25,000 rpm, rotational speed (min.): 1 rpm, Equipment: chip conveyor, documentation/manual, 4 Machines Available with identical configuration. Each machine ahs less than 700 spindle hours !!! Horizontal twin-table machining center with 2 spindles SPECIAL MACHINE FEATURES -Monobloc design -Linear and torque motor in the feed axes -Gantry drive in the Y axis -Mass optimized machining unit Box-in-open-Box -Workspindle optionally with HSK A40 or HSK E40 taper -Double swivel carrier with 2 integrated rotary axes for in-cycle loading / unloading -Trend-setting technologies that boost energy efficiency -Central workstation Description The BA W02-22 is a horizontal, twin-spindle machining center. Mainly used for 4- and 5-axis machining of small non-ferrous metal workpieces. The linear and torque motors of the feed axes guarantee with a maximum workpiece accuracy, the highest possible dynamics and very short non-productive times. In order to ensure loading and unloading in parallel to the machining time, the BA W02 is equipped with a double swivel trunnion Linear motors The use of linear motors in the feed axes X, Y and Z makes it possible to achieve speeds of 120 m/min (X- and Y-axis) and accelerations up to 22 m/s² (Z-axis). Linear motors have significant advantages over conventional drives with ball screws in terms of energy, wear and noise emissions. Three-phase synchronous motors are used in the BA W02-22. Workspindle Two different motor spindle types are available with HSK 40 interface for the BA W02-22. HSK A40, 25,000 rpm: This synchronous motor spindle features high dynamics. It has a core spindle with a very low mass moment of inertia. This allows for a very short run-up time to a maximum speed of 25,000 rpm with a constant high torque. This results in a consistently short chip-to-chip time over a speed range up to 10,000 rpm and best times for thread cutting. TECHNICAL DESCRIPTION OF STANDARD MACHINE - BA W02-22 WORKING RANGE linear axes Spindle distance 250 mm X axis 200 mm Y axis (tool change position) 350 mm (525mm) Z axis 300 mm Dsdpfx Akou Im Enecocg WORKPIECE CARRIER A/U Swivel carrier system with plane surface gear teeth (Q-axis) Swivel time 0° / 180° 2.25 s Max. asymmetrical loading Repeatability accuracy relative to 500 mm 0.005 mm Two independent rotary axes (A-axis/U-axis), suitable for holding clamping bridges. The rotary axes, each consisting of a directly driven NC rotary tables with direct and absolute angle measurement and a counter bearing Max. dimension of fixture/workpiece 425mm x 630mm Max. weight of fixture/workpiece 160kg Peak torque (standard) 420 Nm WORKSPINDLE HSK A40 Liquid-cooled motor spindle based on AC synchronous technology Speed range 1-25,000 rpm

Condition: used, Year of construction: 2012, Double-spindle machining centre with swivelling carrier for mounting clamping bridges Traverse paths x-axis: 800 mm / y-axis: 900/1200 mm / z-axis: 650 mm Spindle distance: 800 mm Dodpfxeyw R Ndj Akcscg Spindle speed up to 12,500 rpm Power 10% - 40% - 100% duty cycle = 42 / 35 / 28 kW Torque 10% - 40% - 100% duty cycle = 200 / 165 / 135 Nm Tool changer: 2 x 42 tool positions Tool holder: HSK 80 Rapid traverse: 120 m/min - CNC control Siemens 840 Dsl - Central coolant system

Condition: used, machine/vehicle number: 12400, functionality: fully functional, power: 24 kW (32.63 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 25 mm, spindle mount: MK 4, drilling depth: 120 mm, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 1,000 rpm, rotational speed (min.): 63 rpm, total width: 590 mm, total length: 700 mm, total height: 2,050 mm, throat depth: 315 mm, table width: 590 mm, table length: 700 mm, overall weight: 1,000 kg, VEB BK 25 AI Column Drilling Machine – Robust Industrial Version For sale is a stable and durable column drilling machine, model BK 25 AI, manufactured by VEB Werkzeugmaschinenfabrik Saalfeld (GDR). This machine features a heavy-duty cast iron design, making it ideal for use in workshops, mechanical engineering, maintenance, or training facilities. The machine provides a drilling capacity of up to 25 mm in steel and is equipped with an MK4 spindle taper. It offers a total of 12 mechanical speed settings, ensuring high torque and optimal adjustment for various materials. The quill stroke is 120 mm, with a throat depth of 315 mm. The generous worktable (700 × 590 mm) with T-slots offers versatile clamping options. Both drill head and table are adjustable, allowing for flexible operation. Power is supplied by a 2.4 kW motor (380 V, 3-phase, 50 Hz). The spindle speeds range from 63 to 1000 rpm. Technical Highlights: • Drilling capacity in steel: 25 mm • Spindle taper: MK4 • Speed range: 63 – 1000 rpm • 12 mechanical speed settings • Quill stroke: 120 mm • Throat depth: 315 mm • Table size: 700 × 590 mm • Total weight: approx. 1000 kg • Connection: 380 V / 3-phase Equipment: • Height-adjustable worktable • Mechanical speed selection • Solid cast iron construction Dcjdpfx Aeyw Rpwokceg • Industrial-grade design • Made in Germany (GDR) The machine is in good used condition and ready for immediate operation. Inspection under power is possible.

Condition: new, Year of construction: 2025, operating hours: 40 h, functionality: fully functional, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828D, workpiece length (max.): 550 mm, workpiece diameter (max.): 400 mm, total height: 1,900 mm, total length: 3,010 mm, total width: 2,500 mm, rotational speed (max.): 3,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, input voltage: 400 V, type of input current: AC, turning diameter: 400 mm, turning diameter over cross slide: 570 mm, bar passage: 87 mm, turning diameter over bed slide: 570 mm, turning length: 550 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, GEWA UT300 Dcjdpfeyr A U Tex Akcog - Demonstration machine - Equipment: Control system: Siemens 828D Siemens drive components Centralized automatic lubrication system External enclosure Telescopic way cover Transformer Control cabinet Operator work area lighting Signal tower light LCD monitor Linear guides Servo tailstock Hydraulic chuck Sauter tool turret with 12 driven tools (BMT55) Renishaw tool measurement system Machine operating manual Pneumatic air gun Water gun Oil skimmer Chip conveyor and coolant tank This and other machines from GEWA Werkzeugmaschinen GmbH can be inspected at our facility in the Eifel region.

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 25 kVA, torque: 135 Nm, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 2,600 mm, total width: 2,310 mm, table width: 1,000 mm, table length: 550 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 30 bar, spindle motor power: 19,000 W, spindle nose: HSK63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical Machining Center VM800 - Demonstration Machine - Technical specifications: Control unit: Siemens 828D Milling spindle 12,000 rpm, HSK63 Internal coolant supply (IKZ) 30 bar Bed flushing Renishaw OMP60 touch probe (Heidenhain available on request) Renishaw TS27R tool measurement (Heidenhain or BLUM available on request) Direct measuring systems in X, Y, Z axes by Heidenhain Rotating inspection window SPINVISTA (Black Edition) Automatic door Robot interface Automatic power-off function Automatic tool changer (30 positions, HSK63) Dedoyr A T Aopfx Akcjcg Centralized automatic lubrication system Telescopic way covers Electronic handwheel for manual operation Signal lamp Machine operating manual Pneumatic air gun Water gun Air blow gun Chip conveyor Coolant tank 286L This and other machines from GEWA Werkzeugmaschinen GmbH are available for viewing at our facility in the Eifel region.

Condition: used, Year of construction: 2020, Universal CNC Milling Machine, Maker SHW Werkzeugmaschinen, Model PowerSpeed 5, YOM 2010; X-travel 8000 mm, Y-travel 2100 mm, Z-travel 1300 mm; Non-Rotating Workbench, Control: SIEMENS 840D PL; Tools in tool magazine: 48 Dsdpsyhm Agefx Akcocg Spindle speed (max.): 6,000 rpm Spindle speed (min.): 36 rpm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Table width: 5,500 mm Table length: 2,600 mm Total height: 4,900 mm Total width: 16,200 mm Total length: 9,000 mm Weight: 31,600 kg (Not include cabinet and hydraulic station)

Condition: used, The ABS 325 S NC is a robust and precise addition to the category of Horizontal Mitre Cutting Bandsaws, belonging to the Auto Miter Bandsaw group by KNUTH. This high-performance production band saw features a dual column design that enhances stability and cutting accuracy. The material feed is powered by a controlled servo motor with ball screw drive, offering a remarkable positioning accuracy of ±0.2 mm. Users can easily program and manage operations via the Omron touchscreen controller, which supports up to 30 programs with 50 steps each. For added flexibility, the ABS 325 S NC includes an option for hydraulic bundle clamping, alongside a digital display for easy reading of manually set miter angles. This fully automated saw excels in applications requiring mitre cuts in solid materials, tubes, and profiles, and is designed for high durability in demanding environments. With features like a hydraulic cutting angle clamping and automatic stroke height control, this saw ensures minimal downtime. You can request a quote for the ABS 325 S NC in the category of Horizontal Mitre Cutting Bandsaws and discover why this Auto Miter Bandsaw is a perfect fit for your production needs. Dsdpfx Akoyq N Iqecscg