Used Festo Dn-50-500 Ppv for sale (42,293)

Condition: excellent (used), Year of construction: 1999, operating hours: 686 h, GILDEMEISTER lathe NEF plus 500 with Heidenhain Manual Plus control. In like-new condition. Ksdpfez Afc Tox Ah Ejdt

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-25-PPV-A -Stroke: 25 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Hole: Ø 16 mm -Max. pressure: 12 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 265/80/H130 mm Kdodpfx Ahoxay Ras Eot -Weight: 2.4 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-400-PPV-A -Piston: Ø 32 mm -Stroke: 400 mm -Pressure: max. 12 bar Kdedpfx Ahsdkx Tlj Ejt -Pneumatic damping: adjustable on both sides -for: proximity switch -Number: 1x available -Price: per piece -Dimensions: 45/45/H545 mm -Weight: 1.7 kg

Condition: ready for operation (used), Festo 8022601 / ESBF-BS-50-570 -* electric cylinder J808, used, in good condition, 100% functional, delivery as shown in the photos Kdjdpfjx Erl Aex Ah Eot

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-80-200-PPV-A -Piston: Ø 80 mm Kdedpfx Ahjd S Daij Ejt -Stroke: 200 mm -Max. Pressure: 12 bar -Dimensions: 420/95/H95 mm -Weight: 5 kg

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz Kdedjyga Utopfx Ah Eot • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: excellent (used), Year of construction: 2005, operating hours: 5,423 h, turning length: 510 mm, turning diameter: 356 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, total height: 2,230 mm, total length: 3,495 mm, total width: 2,050 mm, overall weight: 5,800 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Kdjdpfx Aoui Ndbeh Eot Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm -Number of teeth: 160 teeth -Number: 8x saw blades available Kdsdpfxsgiiwxj Ah Eet -Price: per piece -Weight: 6 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder, guide unit -Manufacturer: Festo, guide unit -Type: FEN-50-0250-KF -Stroke: 250 mm -Bore: for piston Ø 40 mm -Price: per piece -Number: 1 piece -Dimensions: 437/135/H70 mm -Weight: 4.7 kg/piece Kedpfx Ahofxbg Re Eedt

Condition: used, linear drive, linear gear, lifting gear, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, short-stroke linear slide -Manufacturer: Linear drive short-stroke linear slide Kedpfsuzn Epsx Ah Eedt -Type: 3 842 233 500 -Stroke: 35 mm -Dimensions: 180/60/H35 mm -Weight: 0.8 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Centering table CPRC-600, length 1.2 m - Length: 3 m - Two feed speeds (working and return) - Two centering arms - Pneumatic pressure 2. Multi-blade saw type RP-500-G, max. cutting height 160 mm - Saw shaft drive motor 55 kW, feed motor 2.2 kW (stepless speed adjustment - inverter) - Chip collection conveyor belt - Strong lateral pressure rollers for offcut removal - Automatic feed regulation - Automatic bearing lubrication - Maximum number of circular saw blades on shaft: 15 pcs (Ø 450 x 70) - Maximum thickness of cut material (cant): 160 mm - Minimum thickness of cut material: 50 mm - Minimum length of cut material: 1.2 m - Lower drive shafts: 6 pcs - Upper extraction: automatic pneumatic chip extraction, extraction socket Ø 250 mm - Lower chip extraction + belt + extraction diffuser Ø 200 mm, portable control panel - Machine length: 2100 (2600) mm - Machine width: 2080 mm - Machine height: 1800 mm - Machine weight: 2200 kg - Machine’s productivity: 6-10 m³/h - Machine does NOT include saw blades - Power consumption approx. 62 kW 3. Outfeed conveyor DPTOZ-100 for ripped boards - Length: 4 m - 2 cross chains 4. Cross chain conveyor for sorting and picking boards - Width: 1 m - Length: 2.5 m Very little used. Like new. Kodpfxsynkgie Ah Ejdt TOP condition.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNC-40-80-PPV-A -Stroke travel: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm/M12 x 1.25 Quantity: 1 piece available -Dimensions: 240/55/H87 mm Kdedpfofxrgdex Ah Eot -Weight: 1.3 kg

Condition: ready for operation (used), Festo EMMS-AS-100-S-HS-RMB 550125 servo motor, serial number J8N4265, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kjdpfx Ahezzuqds Esdt

Condition: used, Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 500 x 6 mm -Inside: Ø 50 mm -Hole circle: Ø 100 x 17 mm Kdedpfx Ahegiiw Hj Est -Number of teeth: 160 teeth -Number: 7x saw blades available -Price: per piece -Weight: 6,1 kg/piece

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-1000 PPV-A -Stroke: 1000 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -max. pressure: 12 bar -Dimensions: 1190/80/H110 mm -Weight: 10.2 kg Kedpfx Ahowxtmno Ejdt

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Kdedeyw H Rkepfx Ah Est Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Condition: excellent (used), Price quoted per unit. Professional LeCroy 9354AL digital oscilloscope designed for advanced measurements and diagnostics of electronic circuits. The device is equipped with 4 measurement channels, a 500 MHz bandwidth, and a high sampling rate, making it suitable for research laboratories, electronics service centers, industrial automation, and R&D departments. Technical specifications: • Manufacturer: LeCroy • Model: 9354AL • Type: digital oscilloscope Kdedpfx Ahjzaf Sko Est • Bandwidth: 500 MHz • 4 measurement channels • Sampling rate up to 2 GS/s • Acquisition memory up to 8 Mpts • BNC inputs • Built-in CRT screen Condition: Used device, fully functional. The oscilloscope starts up correctly and displays waveforms. Normal signs of wear and tear are visible, resulting from use and storage. Note: One of the plastic housing elements at the back has a crack. The damage is purely cosmetic and does not affect the device's operation or performance parameters.

Year of construction: 2010, condition: ready for operation (used), machine: used piston hydraulic membrane pump type: Abel HMD-G-50-500 Flow rate: max. 30 m³/h Discharge pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, - with blower The pump is controlled via frequencly converter. Kdsdpfsd Exqlex Ah Eet

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES Kedpfszr Uudsx Ah Ejdt + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, overall weight: 1,900 kg, Emmegi Twin Electra 500 double miter saw with 3 CNC-controlled axes Cutting length 5000mm - longer in automatic mode, with automatic repositioning of the saw up to 10000mm Overhauled/like-new double miter saw with saw blades D=500 mm The machine can be motor-driven to swivel from 135 to 22.5 degrees and has a cycle control system. Software options for short cuts, macros, overlength cuts, crosscuts and cycle cuts are also available for this machine. Data transfer is possible (Orgadate, Schücal, etc.) Kdjdpfx Aoz Adyweh Ejt Accessories: Moving roller conveyor, tensioner on roller conveyor, automatically extendable profile support between the heads.

Condition: used, Year of construction: 2001, operating hours: 37,300 h, functionality: fully functional, Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connection power: 19kVA, control system: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 37,700 h, multi-tool control, optional sensor-controlled feeder, marking and blowing device for small parts, chip conveyor with container, soft punch. The machine has been regularly maintained and has already been upgraded with the conversion kit for the new linear amplifier. Kdjdpfoz Dt Iwjx Ah Eet

Condition: used, Year of construction: 1983, Boehringer DUE 500 lead and feed spindle lathe Condition: Used, geometrically overhauled in 2026 Year of manufacture: 1983 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked and adjusted. A test report according to DIN 8605 is available. During the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data: Kdsdpez A Tt Defx Ah Eet Center height: 250 mm Distance between centers: 1300 mm Spindle bore: 62 mm Chuck diameter: 300 mm Spindle speed: 2240 min-1 Motor power: 11 kW Space requirement approx.: 4000 x 1525 mm Weight approx.: 4300 kg Equipment: 3-axis digital display, NEW Coolant system Chuck guard with microswitch Emergency stop Roller guard Machine light Geometry report Inquiry item: Transportation costs will be provided in an individual offer.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i Series, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 750 II was manufactured in 2023. It features an impressive X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,800 × 750 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 750 II vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Table size: 1,800 × 750 mm • Spindle motor power: 28 / 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle air curtain Kdodpozlg Amefx Ah Eet • Tool holder type: BIG PLUS BT40 • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Machine enclosure: Full splash guard with top cover • Tool load monitoring • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • Data server & memory card: 1 GB • AICC II – 200 blocks • iHMI easy operating system (EZI & machining cycle) • Built-in transformer • Electrical line filter Additional equipment • Hinged belt chip conveyor (right side) • Coolant tank on right side • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Machine lifting hooks

Condition: used, Year of construction: 2002, Description to follow! Kdodpowugmmsfx Ah Eot

Condition: used, Year of construction: 1986, Working width: 500mm, voltage/frequency: 380V/50Hz, total connected load: 18A. Inspection possible by prior arrangement. Kdsdpfx Ahez A An Re Eet