Used Demag Dkun 1-100 K V1 F4 for sale (97,503)

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Klsdpfx Anei E Trpscsr

Year of construction: 2001, condition: ready for operation (used), Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement. Kedpfxsxx Ufio Ancslr

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm Klodpfx Aexn Tz Ijncjr - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: new, Year of construction: 2026, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm Klsdpfoxaar Dox Ancor ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Electric motor, three-phase motor Kledpfx Aogxcu Usncor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: KR 100, 1/4 -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 22 x 50 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 345/200 / H230 mm -Weight: 29 kg

Condition: good (used), Three-phase synchronous motor, geared motor, electric motor, servo motor Klodpfx Aneh Db E Ujcer -Manufacturer: Baumüller, Servomotor three-phase synchronous motor -Type: DSOG 100-K -Speed: 3000 rpm -Power: 11 kW -Transmission: SEW type R82 LP90 i= 10.22 -Speed: 1400 / 137 rpm -External fan: W2S130-AB03-10 -Shaft: Ø 50 x 100 mm -Design: B3 -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 1050/285/H345 mm -Weight: 116 kg

Condition: good (used), Year of construction: 2011, Universal tipper suitable for large and tall boxes, dimensions shown in the photos. Kedpfxowynlbe Ancslr

Condition: good (used), Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-K -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 11 kW -Brake -External fan -Design: Hollow shaft Kljdpfxsb A I Ahs Ancjr -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Weight: 150 kg

Condition: new, Baumüller DSG 100-K servo motor SN:20521958 + DG 66 ANC encoder + DGS 67 A5B encoder, unused with storage marks, 100% functional, scope of delivery as per photos Kledpfxji D E Dvo Ancer

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm Kledpowka S Iefx Ancsr - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10000 € 193 € Kledpfx Answirtuecjr 100 to horizontal verschiebbar 300 mm 1570 mm 220x160 mm 5 mm/s 10 mm/s 2630 mm 1000 mm 2430 mm 1600 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Klsdpevf E Avjfx Ancor Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, empty load weight: 7,840 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, Drum brake EBS Payload 34,160 kg Rolling tarpaulin Platform BPW axles Lifting and lowering system Kjdewiw T Tspfx Ancolr Errors excepted

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Klodpfx Ansxpui Nocer Weight: approx 4 T

Condition: new, I offer SIEMENS synchronous motors in the following versions: Klsdpfxeyxdw Do Ancsr 👉 1FE1093-6WV11-1BZ2-Z 👉 1FE1093-6WV1 High-grade built-in industrial units suitable for CNC machine tools and precision drive systems. Condition: new / old stock (NOS) ⚙️ Technical specifications: Manufacturer: Siemens Type: synchronous motor (built-in / spindle motor) Voltage: 425 V Maximum speed: up to 7000 rpm Cooling: water-cooled Temperature sensor: KTY84-130 Duty cycle: S1 / S6 Protection rating: IP00 Country of origin: Germany 📊 Additional information (for version 1FE1093-6WV11-1BZ2-Z): Power: 16.8 – 21.5 kW Current: 43.0 / 60.0 A Maximum torque: 165 Nm 📦 Included: stator rotor Siemens documentation

Condition: ready for operation (used), DEMAG DH2100 H18 - 40 t Ksdpfx Aney D Iwxecjlr

Condition: good (used), Technical data for pallet rack beams: Racking system: META Thyssen Kodpoy Akh Rofx Ancolr Included in delivery: 01x pallet rack beam, used Color: yellow Beam type: HN 100|20 Box profile: 100 x 50 mm Connector: 3 HK (hooks) Clear width: 3,600 mm 02x safety pins, used Finish: fully galvanized For securing the cross beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on place of delivery or scope of order.

Condition: used, Demag PK 10 N electric chain hoist with electric trolley complete Kedpfx Aorvkanencslr

Condition: good (used), Year of construction: 1986, Mannesmann Demag single electric chain hoist load capacity 1000 kg + load capacity 2000 kg with trolley electric or manual trolley We have 10 cranes in stock. Kljdporgrp Ssfx Ancor

Condition: used, Year of construction: 2010, operating hours: 47,000 h, clamping force: 320 kN, displacement volume: 891 cm³, injection pressure: 2,420 bar, overall weight: 17,300 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request Kjdpex E A Twjfx Ancslr terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2006, operating hours: 3,010 h, total height: 2,300 mm, total length: 2,850 mm, total width: 2,150 mm, Empty weight: 6.000 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 3010 - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Fanuc - Control system type: Oi-MC - Power [kW]: 11.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 530 - Z-axis travel [mm]: 510 - Table length [mm]: 1200 - Table width [mm]: 510 - Tool holder: ISO40 - Max. spindle speed [rpm]: 10000 - Options: Chip conveyor, Tool magazine - └ Tool magazine [pcs.]: 24 - Tools included: Yes - Transport dimensions: 2850mm x 2150mm x 2300mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ksdpfx Anoxbq U Escolr Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Electric chain hoist crane DEMAG type PK1N-F Serial No. 1498030 Load capacity: 125 kg Hook travel: 4 meters Kledpfoyy Df Rsx Ancjr Distance from suspension to load hook: 410 mm Lifting speed: 8 m/min Fine lifting speed: 2 m/min Pendant cable length: approx. 1.1 meters Power supply: 380 Volt, 50 Hz 1 chain fall = 125 kg - Emergency stop Weight: 20 kg Good condition

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 Kjdpsxzqp Aofx Ancjlr -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: used, Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: Switching elements are missing, see photos -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg Ksdoxzq Sqjpfx Ancolr

Condition: excellent (used), functionality: fully functional, 2 units DEMAG trolley 3.2 t, complete with hoisting unit PLV168 Very good condition, ready for immediate use 1 unit for €3,600.00 net 2 units for €6,900.00 net DEMAG slip ring motor 36/24 S4 GÜ Fine gear FG36 19K or Fine gear 72 DFg refurbished or Hoist motor 36/24 K6P 24/14 K4P 24/10 K4P Info: 20,000 DEMAG spare parts and components in stock! demag parts warehouse Kjdpfjwafidjx Ancolr