Used Cnstamp Multi V Die for sale (42,834)

Condition: good (used), 400mm multiformer in lovely condition. Lasdjv D Hfpopfx Albjh

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 784 mm, total length: 835 mm, total width: 742 mm, Tested forklift battery for your truck – 48V 6PZS 930AH – DIN A + 1 year warranty + incl. Aquamatic system + incl. end discharge lead & REMA 320 connector (other connectors available upon request) + Capacity: min. 90–100% (C5 capacity protocol is included upon delivery) + Year of manufacture: 2024 Dimensions: Length 984 mm Width 630 mm Height 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Linde E 18 – 322-00 Linde E 18 – 386-02 – side battery change Linde E 18 Z – 322-00 Linde E 20 PHL – 335-00 Linde E 20 PHL – 386-00 Linde E 20 PHL – 386-02 Linde V – 5213-00 Linde V – 5213-01 Linde V MODULAR – 5213-00 Linde V MODULAR – 5214-00 Toyota/BT RR-B 8 Common battery sizes available on request. Transport possible. Lasdpfey Rntyox Albsh

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Lasdpfx Aezfi A Aslbjh Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: used, mileage: 81,691 km, power: 100 kW (135.96 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,050 kg, next inspection (TÜV): 03/2028, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 6 m³, loading space length: 2,760 mm, loading space width: 1,655 mm, loading space height: 1,350 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Vehicle No. for customer inquiries: 127 ----Special equipment: Extra long * Air conditioning, regulated (Tempmatik) * Parking package Laodpfxozciifs Albjh * Rear view camera * PTC heater * Seats in the driver's cab: Co-driver's seat as a double seat * Audio navigation system Audio 40 (DAB+, Bluetooth, USB) * Increased gross vehicle weight to 3.05 t * Exterior mirrors, electrically adjustable and heated, both sides * DAB tuner (digital radio reception) * Automatic activation for headlights * All-weather floor mats * Rear door without glazing (opening angle 180 degrees) * Wooden floor in the cargo area * Comfort opening + closing with infrared remote control * Fuel tank: enlarged * Cargo area light, LED * Steering wheel (steering column mechanically adjustable) * Steering wheel with multifunction buttons including trip computer * Metallic paint * Full wheel covers * Spare wheel holder under the end of the frame including jack * Windshield wiper with rain sensor * Sliding door, cargo/passenger compartment, left side * Seat cover/upholstery: artificial leather (driver's cab) * Seats in the driver's cab: driver's seat, comfort * Fleece battery 92 Ah * Heat-protective glazing * Two-way speakers in the front ----Standard equipment: * 3-button remote control for central locking * 3rd brake light * Adaptive brake light * Airbag, co-driver's side * Airbag, driver's side * Hill-start assist * Anti-lock braking system (ABS) * Drive type: front-wheel drive * Exterior mirrors, aspherical, both sides * Outside temperature display * Mounting rails for roof racks * BlueEfficiency package * Brake assist * Braking system with ABS+ASR * Design and equipment line Base * Electronic Stability Program (ESP) * Driver assistance system: Attention Assist (fatigue detection sensor) * Driver assistance system: breakdown management * Driver assistance system: crosswind assist * Power windows, electric, 2-way * Windshield with antenna * Generator 185 A * Cruise control * 6-speed transmission - FSG * Cup holder in the rear * Cup holder in the front * Seatbelt pretensioners * Grab handle, co-driver's side * Glove compartment, lockable * Body/superstructure: extra long * Body/superstructure: standard van * Communication module (LTE) for digital services * Cargo area partition, continuous * Load securing/tie-down points * Mercedes-Benz emergency call system * Model refinement * Engine 1.7 liters - 100 kW CDI CAT * Rear fog lamp * Diesel particulate filter * Wheelbase 3430 mm * Low emissions according to exhaust standard Euro 6d-TEMP * Sliding door, cargo/passenger compartment, right side * Power steering * Safety belt system with warning system (driver/co-driver side) * Steel rims 6.5x16 * Daytime running lights * Window pillar trim * Interior trim in the cargo/passenger compartment: hard fiber, half height * Tie-down rails in the cargo area - side wall to roof frame * Service interval indicator Assyst * Immobilizer * Central locking with remote control ----Technical data: * Wheelbase: 3,430 mm * Cargo area dimensions: L: 2,760 mm W: 1,655 mm H: 1,350 mm * Payload: 971 kg * Tire size: 205/65R16C ----€15,850 net plus VAT * Technical inspection (TÜV) valid until 03/2028 * In the event of export to third countries or the EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing possible

Year of construction: 2018, operating hours: 3,550 h, condition: good (used), fuel type: diesel, Kubota RTVX900 UTV Gator 4X4 Diesel with hydraulic tipper bed, 2018, 3550 hours Video available via WhatsApp. Ongoing stock, see website. Prices ex Nuland. Van de Wert Trading B.V. offers a changing inventory of machines, trucks, trailers and attachments. All our supplies are at trade prices and sold AS-IS without any guarantees. (see our general terms and conditions) For a viewing and/or test drive, you can schedule a non-binding appointment. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Lsdpfx Aleyt Nr Ujbeah 5391 LR Nuland

Condition: new, Year of construction: 2026, functionality: fully functional, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable around the vacuum lifter by loading laser machine continu vacuum protection vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader ( buster type ) include mounting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal. price is for 300 kg lifter 600 kg lifter plus 300 euro 800 kg lifter plus 600 euro =>direct from stock. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Lodpfx Aeytcnvelboah Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Lasdpfxju Nzwus Albsh Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. Ledpfxjyzw Hwj Albjah 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Currently, the line is dismantled and ready for transport.

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 10.000 U/min. tool changer with: 20 place Laodow A I Uujpfx Albsh spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 Tool changer: 20-fach dimension machine approx.LxWxH: 3,0 x 2,0 x 2,15 m

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Laedpfx Aju Idxfelboh Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Lodpfx Alsu Ndf Ijbjah Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, DMG Deckel Maho DMC 1035 V Vertical Machining Center. The machine is in very good optical and technical condition. Inspection while powered on is possible at any time. Technical data: Year of manufacture: 2008 Control system: Heidenhain iTNC530 Travel distances: X: 1,035 mm Lodpozun Snjfx Albsah Y: 560 mm Z: 510 mm Clamping area: 1,200 mm x 560 mm Spindle speed: 10,000 rpm Tool changer: 20-position Tool holder: SK40 Coolant/air blast switchover Electronic handwheel Operating mode 4 Coolant tank free on truck ex works Hagen

Condition: excellent (used), Year of construction: 2011, Control PC-NC Dialog Travel paths X/Y/Z: 1000/1510/700 mm C-axis Ledpfx Ao Adl Ntolboah 30-way electrode changer Hirschmann clamping system Support surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Laodpfx As Admbqolbeh Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Chip conveyor

Condition: excellent (used), Catalog number: 7545 TECHNICAL DATA track width: 250mm roller width: 220mm max. disc diameter: 300mm disc bore diameter: 60mm cutting height: 100mm table width: 650mm table length: 1460mm – top: 2 rows of pawls smooth sliding roller roller with saws smooth, sliding roller – bottom: guide pawls track 2 feed speed settings + stepless central lubrication Lasdpfx Aloztad Tebsh feed motor: 1.2kW main motor: 21kW dust extraction port diameter: 180mm overall dimensions (L/W/H): 1700x1450x1500mm weight: approximately 1800kg – made in Italy – DTR documentation – robust machine – multi-blade saw, used, very good condition Net price: 25900 PLN Net price: 6023 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8094 TECHNICAL DATA - Track width: 300mm - Shaft width: 300mm - Max cutting height: 120mm - Max blade diameter: 350mm - Blade bore diameter: 70mm - Top: - 2 rows of pawls/ejectors - Smooth, sliding pressure shaft - Pawls/ejectors - Pressure pad - Shaft with saws - Pressure pad - Smooth, sliding pressure shaft - Bottom: - Guide rail - Pawls/ejectors - Track - 1 feed speed + variable - Main motor power: 22kW - Feed motor: 2kW - Central lubrication - Laser - Diameter of extraction nozzle: 250mm - Table dimensions (length/width): 2000x710mm - Dimensions (length/width/height): 2600x1500x1600mm – weight: 1340kg ADVANTAGES - Made in Italy - With laser - Multi-blade saw, used, in perfect condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations) Laodpfx Alezx U Iqebeh

Condition: good (used), Year of construction: 1986, DC motor, servo motor, gear motor, electric motor, direct current gear motor -Speed: 30-3000 rpm -Power: 0.07-7.5 KW -Construction: B5 -Diameter shaft: Ø 50 mm Ledpfob R Ua Uox Albsah -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 1160/370/H530 mm -Weight: 222 kg

Condition: excellent (used), CATALOGUE NUMBER 7751 TECHNICAL DATA - track width 250mm - working width of the roller 250mm - max. disc diameter 300mm - disc bore diameter 60mm Ljdpfx Alszr Izkjboah - max. cutting height 100mm - table width with extension 520mm - table length 1580mm *from above: - pawls, 2 rows - sliding roller, metal, pressure roller - roller with saw blades - smooth sliding roller, metal, sliding roller *from below: - sliding roller - guide strip - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 0.75kW - main motor 15kW - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H 1640x1400x1550mm - weight 1000kg ADVANTAGES – Italian made – very good condition – used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, The Mafell HIT-M zero-joint edgebanding machine applies edging material using zero-joint technology to straight, bevelled and free-form workpiece edges. The edging is fed in automatically and bonded to the functional layer of the edging material by means of heat; the BAT-V worktable assists with the guidance and positioning of workpieces in stationary applications. Systainer labelling: HIT-M 65 Type plate labelling: HIT-M-2750 Technical data: Lsdpfxj Ad D Uhe Albeah - Edge height: 10–65 mm - Edge thickness: 0.4–3.0 mm - Inner radius: min. 22 mm

Condition: excellent (used), Catalog number: 7280 TECHNICAL DATA - Track width: 340mm - Shaft width: 400mm - Max. blade diameter: 350mm - Blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: - Ratchets - Sliding, metal pressure shaft - Ratchets - Sliding, metal pressure shaft - Shaft with saw blades - Sliding, metal pressure shaft (2 pcs) From below: - Guide strip - Sliding, metal roller - Ratchets - Track - Electric lifting of the body: 0.55kW - Central lubrication - Smooth feed rate adjustment: 1.5kW Ljdpfxjzrub Dj Albeah - Main motor: 37kW - Diameter of the dust extraction nozzle: 200mm - Overall dimensions (L/W/H): 1800x1670x1780mm - Weight: approx. 2500kg – Made in Germany – Used multi-blade saw, very good condition Original photos Net price: 76900 PLN Net price: 17884 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7762 Laodpfx Alozx Sf Hebeh TECHNICAL DATA PLANER: - cutterhead width 320mm - 3-knife cutterhead - max thickness of the workpiece 180mm - guard for the planer cutterhead - from top: – feed rollers – toothed feed roller – cutterhead – smooth feed roller CIRCULAR SAW: - max blade diameter 300mm - max cutting height 80mm - blade arbor diameter 30mm - blade adjustable up/down - cutting width with guide 270mm - table dimensions 750x460mm - guide ROUTER: - spindle 30mm - spindle adjustable up/down - spindle height 100mm - guide - diameter of dust extraction nozzle 100mm - dimensions L/W/H 1700x2400x1100mm - weight 340kg ADVANTAGES – Bulgarian production – very good condition – multi-functional, used Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional,

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Lodpfxs Ad Hihs Albsah The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: used, mileage: 211,712 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,030 mm, first registration: 11/2021, loading space length: 4,070 mm, loading space height: 1,930 mm, loading space volume: 15 m³, fuel tank capacity: 90 l, CO₂ emissions: 219 g/km, color: white, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, sliding door, traction control, trailer coupling, = Additional Options and Accessories = - Height-adjustable driver's seat - Height-adjustable driver's seat - Easy Pack (Apple CarPlay + Android Auto, Bluetooth phone preparation, DAB receiver, multi-functional steering wheel, multimedia preparation, radio, rear-view camera) - Sliding door on the right side - Alarm system - Alarm system Class I - Heated exterior mirrors - Electric front windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Hill-hold control - Emergency brake assist - Service booklet available (physical) - Start/Stop system - Immobilizer - Adjustable steering wheel = Additional Information = General Information Number of doors: 5 Lajdpfx Aljy Uvkhjbsh Model range: 2021 - 2024 Technical Information Torque: 380 Nm Number of cylinders: 4 Engine displacement: 2,184 cc Transmission: 6 gears, manual transmission Top speed: 159 km/h Dimensions Length/Height: L4H2 Width: 205 cm Weights Unladen weight: 2,153 kg Payload: 1,347 kg GVWR: 3,500 kg Environment and Consumption Average fuel consumption (WLTP): 8.3 l/100km CO₂ emissions (WLTP): 219 g/km Emissions standard: Euro 6d-TEMP Maintenance, History and Condition Booklets: Present APK (Technical Inspection): valid until 12/2026 Number of keys: 2 (2 remote controls) Product Safety EU responsible: Stellantis Nederland B.V. Lemelerbergweg 12 1101AJ Amsterdam, NL customercare.

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 16,620 h, load capacity: 4,000 kg, lifting height: 6,350 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,000 mm, gearing type: automatic, Equipment: cabin, head guard, lighting, sideshift, trailer coupling, LINDE H40D Diesel Forklift TRIPLEX ZVG (sideshift and fork positioner). The machine has just been fully inspected by a qualified technician. Hydraulics are tight, no play anywhere! The unit is in excellent optical and technical condition. No defects! Timing belt has been changed. Complete maintenance carried out. The forklift comes equipped with work lights, cab, heating, and AIR CONDITIONING!!!! TRIPLEX MAST with FULL FREE LIFT Tyres front & rear: NEW! Technical Data & Features: Manufacturer: Linde Model: H40D Fuel type: Diesel Operating hours: 16,620 Year of manufacture: 2016 Load capacity: 4,000 kg Overall height: 3,000 mm Lift height: 6,350 mm Fork length: 4,000 mm Mast: TRIPLEX Full free lift Sideshift Fork positioner Work lights Lajdpfxjwp R Svs Albeh Cab with heating AIR CONDITIONING!!! Heated seat Air-suspended seat Front and rear tyres new Unit is free of defects!! Shipping for this unit is possible!!! New UVV (accident prevention inspection) available on request. Price incl. VAT. Export at net price possible with a valid VAT number.