Used Cnstamp Multi V Die for sale (42,404)

Condition: new, press brake die Multi-V dies Gedeip Dayopfx Akyebu

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Total hight:140 x 140mm Gbjdpfozc Izgex Akyeu V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Gbodpfxezc Izte Akyou Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Total hight:75mm Gjdpjzc Iypsfx Akyobu V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Gbjdpezma Tbofx Akyju Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), Year of construction: 2000, I sell the window angular centre SCM Multiflex. Godpfohw Dfysx Akyobu Moulding heads VIVALDI EU68mm. Cutting + Tenoning spinde right side / Tenoning side. 2 pcs. Profiling spindles + glass strip cutting machine left / Profiling side. Available immediately.

Condition: used, functionality: fully functional, Simatic Multi Panel Touch Siemens Siemens MP 277 10-inch Touch 6AV6 643-0CD01-1Ax1 Gsdowg Tmdepfx Akyobu Made in Germany Stock: 2 units Condition: Used Price per unit External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: excellent (used), Year of construction: 2016, (for processing large plates) Gjdpfx Aez Eaa Nekyjbu Equipment / Additional information: The plates are fixed to the table using a vacuum.

Condition: good (used), ML-720 Die Cutting Machine This machine is used to cut shapes from a die (die) from materials such as paper, cardboard, leather, plastics, etc. Godpfx Akezz Hg Rjyebu The machine is ready for operation, after a service inspection. Format: 720 x 510 mm Weight: 1800 kg Power supply: 380 V Motor: 2.2 kW Equipment: – Electromagnetic clutch and brake – Quick-mount frame – 3 operating modes: continuous, time-delayed, manual – Central pressure lubrication – Safety guards – Operating tools and instructions with documentation.

Condition: used, Year of construction: 2008, operating hours: 37,000 h, For sale is an ARBURG ALLROUNDER 630 S 2500-800 ECO injection molding machine from 2008 with extensive automation and peripherals. Manufacturer: ARBURG Type: ALLROUNDER 630 S 2500-800 ECO Year of manufacture: 10/2008 Gjdpfx Akozw D Hmoyjbu Clamping force: 2,500 kN / 250 t Injection unit: 800 Control system: ARBURG SELOGICA The machine is equipped with an original ARBURG Multilift V select with a load capacity of 15 kg. The system also includes a complete safety enclosure, conveyor technology, and other peripheral devices. The machine is connected to the power grid and is currently in operation in a production facility. An inspection can be arranged by appointment. Technical specifications / Design: ARBURG ALLROUNDER 630 S 2500-800 ECO Year of manufacture 10/2008 Clamping force 2,500 kN / 250 t Injection unit size 800 Spindle diameter: 55mm Control system ARBURG SELOGICA Operating voltage 400 V / 3~ / 50 Hz Control voltage 230 V / 50 Hz Total connected load 81 kW Total rated current 145 A Automation: ARBURG Multilift V select Year of manufacture 10/2008 Load capacity 15 kg Control via SELOGICA pneumatic design X-/Y-/Z-axes complete safety enclosure part removal via conveyor belt Additional equipment / Peripherals: Piovan material conveying unit material hopper conveyor belt additional conveyor belt on the machine side several temperature control / tool circuits ARBURG temperature control unit extensive media connections complete automation cell. An inspection of the machine is possible after prior appointment. Location: Greater Thuringia area _____ In addition, the following machines, not listed here, are also available: DEMAG Ergotech 50-270 – Year 2002 DEMAG ViVa 100-400 – Year 2000 DEMAG Extra 200-840 – Year 2007 DEMAG Ergotech 80-200 – Year 1995 DEMAG Ergotech 80-200 – Year 2001 ENGEL Victory 80/40 – Year 2006 DEMAG Ergotech 35/320-120 concept – Year 2002 _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are appropriate for their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF Godjh Rkhnjpfx Akyobu 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated Gsdpfxen Sru Hs Akyobu

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. Gsdpov S Synefx Akysbu CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Gjdpfx Akeym Aimjysbu Axle 2: left 8 mm right 8 mm Axle 3: left8 mm righ 8 mm We have the possibility to stack trailers!

Year of construction: 2021, condition: used, functionality: fully functional, We offer this used Schmalz VM-MULTI-H-CON manipulator, manufactured in 2021. Model: VM-MULTI-H-CON Article number: 12.01.99 10001 Order number: 22144181 Serial number: 0DE0082732 Date of manufacture: 02.2021 Gjdjzmrhqepfx Akyobu Machine group: M275 Load capacity: 275.00 kg Own weight: 80.30 kg Voltage: 400 V If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm -Pressure power: 29.42 kN -Nominal pressure: 6/7 bar Gedpfx Aksc Uldreyebu -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Condition: used, Year of construction: 2016, Roll production line, combination type WP Multimatic MUS Selecta Modular V60 Combination Gedpjz A Ryzefx Akysbu Year of manufacture: 2016 Condition: refurbished, immediately ready for use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS, 5-row 3/4/5-row combined roll production line for the production of shaped rolls and long rolls, sliced and unsliced Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6,000 pieces Proofing time: 12 min Dough sheeter for Kaiser rolls, braids, pressed rolls, etc. "Green operation" without proofing cabinet with direct depositing possible (e.g., for Berliner doughnuts) Output in "green operation", theoretically max. 10,000 pieces per hour Adjustable flour spreader Exhaust fan for correcting the proofing chamber climate Optional dryer and stiffening fan Programmable depositing

Condition: good (used), Year of construction: 2005, Clamping force: 200 t Screw diameter: 50 mm Screw dia 2 : 22 mm Gbsdpfjyz Tmyox Akysu Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Multicomponent (2K injection) Drive: Hydraulic 2x hydraulic valve

Condition: new, pressing force: 160 t, V80mm Amada style press brake dies Gbodpfx Akowcxtboyeu

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton Gbodpfsw S Ewqjx Akyeu • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Year of construction: 2001, condition: used, Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Gsdozzqc Nepfx Akysbu

Condition: excellent (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Gbedpfx Ajb A Hl Rjkyeu Article No.: 296 566 -Weight: 170 kg

Condition: new, Amada/promecam style Centrical 1V press brake dies Gbsdpfjin I Hrjx Akyou

Condition: new, V160mm/120mm L200mm Gbjdpfxslp Hvhs Akyju

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Gbodpfx Akjipx Aieysu Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL