Used Wele Sb-316 for sale (2,146)

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Kdjdpfx Ahozy Hl Ro Ejt With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw Kodpfx Ahozy Hcce Esdt With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Kjdsxrgglspfx Ah Eedt

Condition: used, machine/vehicle number: 007818, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Kdodpewu Ab Tefx Ah Est Max Panel Width: 3000 mm Max feed speed: 40 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: used, mileage: 203,400 km, power: 120 kW (163.15 HP), first registration: 12/2019, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, Equipment: air conditioning, airbag, power assisted steering, sliding door, soot filter, EY5 Mercedes-Benz emergency call system, EY6 breakdown assistance, AI1 control code rear axle bevel gear 215, L65 ceiling light(s) in the driver's cabin/passenger compartment with door contact, RS3 steel wheels 6.5 J x 16, Z1N approval N1, XO9 Mercedes-Benz MobiloVan with roadside assistance and extended warranty, CN2 radiator grille frame in vehicle color, XG7 without payload increase/reduction 3,500 kg, IR4 wheelbase 3665 mm, MR6 emission class Euro 6c N1, T77 grab handle at the entry of the load compartment sliding door on the partition, W54 rear doors, two-leaf, opening to the side panel, F3F driver-optimized shift console, HH9 semi-automatic controlled TEMPMATIC air conditioning, E1D digital radio (DAB), Y10 first aid kit, MJ8 ECO start-stop function, E1O MB audio system, ES0 jump start - connection, D03 high roof, ES5 charging package instrument panel, FM3 WET WIPER SYSTEM, HI1 climate zone 1 (cold/comfort), T86 entry handle on the rear right corner pillar, RM0 all-season tires, V43 wooden floor, LA2 headlight assistant, ZM0 panel van, IT4 3.5-ton vehicle, J58 seatbelt warning system for driver's seat, XZ0 model generation 0, W73 step at the rear door, X93 deletion of type designation, ED4 fleece battery 12 V 92 Ah, FF5 storage compartment above the windshield, JF1 rain sensor, T16 sliding door on the right, LB1 side marker lights, RF1 tire manufacturer Continental (10), LB5 3rd brake light, VF7 fabric Maturin black, H20 heat-insulating glass all around, J65 outside temperature display, M40 generator 14 V/200 A, F68 heated and electrically adjustable exterior mirrors, R65 spare wheel carrier under the end of the frame, JG0 shift point indicator, S87 driver's seat, low, Y44 warning triangle, Y43 hydraulic jack, LC2 LED light strip in the load compartment, SA5 airbag driver, K13 main tank 71 liters, CB1 suspension for comfort and load protection, JH3 communication, we can be reached by phone Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! - Errors and prior sale excepted!! Kdjdpfx Aoz A Dthoh Eet - All information without guarantee ... more on our homepage

Condition: used, mileage: 274,213 km, power: 120 kW (163.15 HP), first registration: 03/2011, fuel type: diesel, tire size: 195/75R16C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2011, Equipment: ABS, central locking, electric window regulation, power mirror, = Additional options and accessories = - Stability control = Further information = Tire size: 195/75R16C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Rear axle: Dual tires; Tire tread depth left (inside): 8 mm; Tire tread depth left (outside): 8 mm; Tire tread depth right (inside): 8 mm; Tire tread depth right (outside): 8 mm Unladen weight: 1,930 kg Payload: 1,570 kg GVWR: 3,500 kg Damage: none Ksdpszxlfmsfx Ah Esdt

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Kdodpfxsz Abcpe Ah Eot Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, machine/vehicle number: 007887, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW-SB DOOR LINE Position 2: introducer FERWOOD CUSTOMIZED-FW-SB DOOR LINE Kdodpfx Ahezwmb Hj Est Position 3: double edge banding machine for doors FERWOOD CUSTOMIZED-FW-SB DOOR LINE Position 4: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW-SB DOOR LINE Position 5: return stacks FERWOOD CUSTOMIZED-FW-SB DOOR LINE

Condition: good (used), Year of construction: 2013, MHS + TREIF BREAD SLICING MACHINES, TYPE IDEAL SB We offer bread slicing machines from TREIF and MHS. Large quantities are in stock. Please inquire by phone for quantities. For example: MHS BREAD SLICING MACHINE TYPE IDEAL SB / for all types of bread, 8 / 10 / 12 mm slice thickness Art. No.: 0604412 Approximate dimensions: H 900 / D 780 / L 1100 mm Mounted on 4 wheels for easy relocation Knife type: Round knife 260 mm Model: MHS IDEAL SB Model number: see above Used, year of manufacture: 2013 and others Please inquire before submitting an offer (depending on stock levels) Kdjdpfxjgz H Ebs Ah Est Power supply: 1 - 230V+N+PE / 4.8 A / 1.0 kW Weight: 200 kg The price quoted is net Plus the currently applicable value-added tax The item can be inspected by appointment Description: Good condition All parts are present Functioned perfectly until the end And is technically in order The technology is immediately ready for use If you require shipping, please contact us before purchasing to discuss dismantling and shipping costs (Photo is similar) Errors in the text and in the photos expressly reserved.

Condition: good (used), machine/vehicle number: 17402, Year of construction: 2020, operating hours: 6,150 h, load capacity: 1,600 kg, lifting height: 4,640 mm, free lift: 1,640 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,080 mm, battery voltage: 48 V, fork length: 1,200 mm, front tire size: 18x7-8, rear tire size: 16x6.8, overall weight: 3,234 kg, Equipment: 3rd hydraulic function, 5279593 Serial Number: FN628117 Kdjdpfez Aw N Eex Ah Est Battery Details: 48V 6PzS 750Ah BJ: 2020

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible Kjdpfx Ajz Agv Ush Esdt - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Travel : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0.001 [°] Kdodpfx Aszk Rrvsh Eot COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 4.6 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.070 x 1.177 [mm] - Machine height : 1.760 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of hours under power : 42640 [h] - Number of working hours : 23491 [h] - Number of spindle hours : 12535 [h] EQUIPMENT - CNC : Fanuc Oi-TD - 3 colors status lamp - Rotating guide bush - Ejection of workpiece - Parts catcher - Parts conveying strip - Coolant tank - Bar loader : IEMCA SMART 320 / 32 LL - Electric transformer

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Kdedpfx Aoz Ag Rrjh Ejt - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Kjdpfx Asz Agw Eoh Eodt - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Frying machine, Roka / Kippfix SB 40B-S Frying machine without heating coils for approximately 360 pieces/hour of Berliner doughnuts / pastries Kdjdpfxezfypme Ah Eot 2 frying baskets & 1 steam lid Drip tray Connection 400V, 16A-CEE plug Used equipment Visit us!

Condition: used, functionality: fully functional, machine/vehicle number: 516029002148, Year of construction: 1999, operating hours: 6,424 h, load capacity: 5,000 kg, lifting height: 2,800 mm, free lift: 1,580 mm, fuel type: electric, mast type: duplex, empty load weight: 6,828 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: 516029002148 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire condition: 40 - 60% Rear tire condition: 80 - 100% Kjdpfxez Dcm Aj Ah Eedt Battery voltage: 80V Battery Ah: 930Ah Battery manufacturer: SBS Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: German Still R60-50 No.: R0828 Year of manufacture: 1999 Operating hours: 6,424 h Lifting capacity: 5,000 kg Lifting height: 2,800 mm Mast: Duplex Free lift: 1,580 mm Version: Suitable for containers Battery: 80 V / 930 Ah, year 2019, manufacturer SBS Battery condition: 80–100 % Equipment: Side shifter, 3rd and 4th hydraulic valve, front and rear work lights, and load backrest. Condition: Ready for use and fully functional Optical condition: good Technical condition: very good Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English Still R60-50 No.: R0828 Year of manufacture: 1999 Operating hours: 6,424 h Lifting capacity: 5,000 kg Lifting height: 2,800 mm Mast: Duplex Free lift: 1,580 mm Version: Container suitable Battery: 80 V / 930 Ah, year 2019, manufactured by SBS Battery condition: 80–100% Equipment: Side shift, third and fourth hydraulic valve, front and rear work lights, and load backrest. Condition: Ready for use and fully functional Optical condition: good Technical condition: very good Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shifter, 3rd valve, 4th valve, rear work light, front work light, load backrest.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Ksdpoziy Idofx Ah Ejdt Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Condition: used, mileage: 136,701 km, power: 120 kW (163.15 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for enquiries): 132 Mercedes-Benz Sprinter 316 CDI MAXI 1 previous owner. Service booklet maintained. Last service in 11/2024 at 129,089 km. Paint Code: * 1230 Paint Colour Zinc Yellow MB 1230 Interior Trim: * VF7 Fabric Maturin black Equipment: * 1230 Paint Colour Zinc Yellow MB 1230 * 219L Hamburg * AR3 Axle ratio I = 4.182 * BH1 Hold Function * BH8 Control code for hydro unit version 7 * BK2 Control code for wheel brake configuration 2 * C6L Multifunction steering wheel * C907 - * CB7 Stabilisation Level I * CL1 Steering wheel adjustable in tilt and height * CW2 Elimination of vehicle lowering * D03 High roof * D50 Full partition * E07 Hill Start Assist * E1D Digital radio (DAB) Kodsxynv Repfx Ah Eedt * E1E Navigation * E1G Live Traffic capability * E2N Control for Pro package features in NTG6 * E3M MBUX multimedia system with 7-inch touchscreen * E43 13-pin trailer socket * ED4 Fleece battery 12 V 92 Ah * EE5 Ultracap - Automatic transmission locking * ES0 Jump-start contact * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F68 Exterior mirrors heated and electrically adjustable * F907 - * FF5 Overhead shelf above windscreen * FG8 Front cup holder * FJ1 Flip lid for storage compartment * FJ4 Storage compartment under dashboard * FJ5 Flip lids for left and right storage compartments * FKA Panel van * G42 7G-Tronic Plus * H12 Warm water auxiliary heater / Parking heater (Webasto) * H1B Tachograph controls front under roof liner * H21 All-round heat-insulating glass with band filter on windscreen * HH2 Warm air auxiliary heater electric * HH9 Semi-automatic air conditioning Tempmatic * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IE0 Model series C907 VS30 Rwd * IG4 Standard * IG5 Basic * IH6 Headunit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IL7 Additional top coat, 1 extra pass * IR6 Wheelbase 4325 mm, rear overhang 1615 mm * IT4 3.5 ton gross vehicle weight * J10 Speedometer km/h * J58 Seatbelt warning device for driver's seat * J65 Outside temperature display * JA8 Crosswind Assist * JB7 Parking package with reversing camera * JD6 Intelligent tachograph EU * JH3 Communication module (LTE) for digital services * JI7 Initial running distance maintenance interval 60,000 km * JW0 Reversing alert * K13 Main fuel tank 71 litres * KP6 SCR emission control, generation 3 * L Left-hand drive * L65 Roof light in cargo/passenger compartment with door contact * L94 Elimination of parking lights * LA2 High beam assist * LB1 Side marker lights * LB5 Third brake light * LE1 Adaptive brake light * LX5 Europe * M40 Alternator 14V/200A * MG3 Engine OM651 DE 22 LA 120 kW (163 hp) * MJ8 ECO start/stop function * MP6 Engine version Euro VI * MQ0 OBD (On Board Diagnostics) level D * Q11 Longitudinal member reinforcement * QA7 Towbar for increased trailer load 3.5 T * R65 Spare wheel holder under rear frame * R87 Spare wheel * RF1 Tyre brand Continental (10) * RH2 Tyres 235/65 R16 C * RM0 All-season tyres * RS3 Steel wheels 6.5 J x 16 * RZ2 Wheel brand Magnetto Wheels * S22 Armrest for driver’s seat, ISO-fix (child seat fastening system) * S23 Twin passenger seat * SA5 Driver airbag * SB1 Comfort driver's seat * SK2 Seat occupancy detector for driver's seat * T16 Sliding door right * T77 Retainer

Condition: used, mileage: 235,000 km, power: 120 kW (163.15 HP), first registration: 05/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, loading space length: 4,300 mm, loading space width: 2,060 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system Audio 15 (radio with color display), outside temperature display, additional battery (reinforced), 220 A generator, steering wheel (steering column mechanically adjustable), steering wheel with multifunction controls incl. trip computer, Becker MAP Pilot navigation system, smoker's package, spare wheel in driving condition, spare wheel holder under the end of the frame incl. jack, interior rearview mirror, seats in the cab: double passenger seat, seats in the cab: double passenger seat with foldable backrests, seats in the cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, separation relay with additional battery, fleece battery 95 Ah Additional equipment: Adaptive brake light, driver's side airbag, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, battery 74 Ah, brake assist, braking system with ABS+ASR, headlining in the cab, lockable glove compartment, body/superstructure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, model update, engine 2.1 liters - 120 kW CDI CAT, wheelbase 4325 mm, low emissions according to Euro 6 emission standard, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, seats in the cab: adjustable passenger seat, maintenance interval display Assyst, heat-insulating glazing, permissible total weight 3.50 t Kodpfx Ahoz A R Nis Ejdt Interior cargo space: L 4.30 W 2.06 H 2.30 meters Payload 850 KG Towing capacity 2000 KG The vehicle is in good condition! This price is a "take-it-as-is" price, which means with Belgian registration papers but without a valid TÜV (German technical inspection). For an additional price of €2500, you will receive a complete TÜV inspection and any necessary repairs.

Condition: used, Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, total length: 15,500 mm, The machine underwent a major overhaul in 2026 for approximately 20,000 euros. The system features large carton magazines with a stacking height of 2200 mm. Kdedpez A Edzjfx Ah Ejt The machine has a large waste management system. The Nextmode has 5 magazines arranged in a row and an SbS function, allowing up to two widths of continuous corrugated board to be placed side by side in each magazine. The system has 8 longitudinal tools for highly flexible production of cardboard packaging. In addition to the standard creasing tools, the system also has a fine perforation technology in all tool groups. The system is currently still in operation and can be inspected upon request. It can handle cardboard grades up to 2.9 BC flute (thickness approx. 7 mm). The machine will be available from approximately November 2026. A price quote will be provided upon request.

Condition: used, Heidelberg cylinder press, standard accessories, working size 54 x 77 cm, 2 clamping frames, inking unit. Kdedpfx Aozwhaweh Eot

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Linde / Bitzer | Triple-Compressor Industrial Chiller Kdodey Ub A Nspfx Ah Ejt Technical specifications of the frame: Unit manufacturer: Linde Aktiengesellschaft Model / Type: VHM 316-4521 Serial number: 10309 Year of manufacture: 1993 Refrigerant: R22 Allowable working pressure: 25 / 13 bar Overall dimensions of the frame: 2930 × 830 × 1870 mm Specifications of the installed compressors (3x Bitzer Kühlmaschinenbau GmbH): Power supply: 380–420 V (50 Hz) / 440–480 V (60 Hz) – 3 phases Maximum operating current: 24 A (per compressor) Volumetric capacity per unit: 42.3 m³/h (for 50 Hz) / 51.0 m³/h (for 60 Hz) Total volumetric capacity of the unit: 126.9 m³/h (for 50 Hz) / 153.0 m³/h (for 60 Hz) Protection class: IP 54 List of compressors in the section: Compressor no. 1: Type S4G-12.2 Y Serial number: 15851279 Compressor no. 2: Type S4G-12.2-40P Serial number: 1676905728 Compressor no. 3: Type S4G-12.2-40P Serial number: 1678210359 Industrial central multi-compressor unit (so-called "compressor pack") built by the German Linde Group based on three two-stage, semi-hermetic Bitzer reciprocating compressors from the S4G series. This type of system is designed to power low-temperature installations – freezers, freezing tunnels, and advanced refrigeration systems in food processing plants (meat, fish, bakery). The design based on three identical units allows for very flexible, three-stage cooling capacity management (in steps of 33%). The system automatically activates the appropriate number of compressors depending on the actual thermal load, which optimizes energy consumption and extends the service life of the components. The entire unit is mounted on a compact support frame, which facilitates installation. Key features: - Reliable Bitzer two-stage compressors: The two-stage compressor series is specifically designed for deep freezing. It ensures stable operation at very low evaporation temperatures and is characterized by a high energy efficiency ratio. - Safety and automation of the Linde frame: The industrial design of the frame integrates a common suction and discharge manifold, an advanced oil equalization and separation system, and the necessary control and measuring equipment (protective pressure switches), which effectively protects the system from failures. - Industrial protection class (IP 54): Hermetic electrical boxes and the compressor design protect the system from moisture and dust, allowing for safe operation in harsh machine room conditions. - Application versatility: The unit is factory-designed to operate with R22 refrigerant. Due to the presence of compressors with the "Y" designation (filled with ester oil), the system can be successfully adapted to work with modern, environmentally friendly alternatives from the HFC group (e.g., R448A / R449A / R404A / R507) after a standard verification of seals and automation settings.

Condition: used, machine/vehicle number: 007809, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Kdodoyhbn Depfx Ah Eot Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1200 mm Max feed speed: 40 m/min Operating Units Right Side: 8 nr Operating Units Left Side: 8 nr

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 18,073 h, I HAVE LIEBHERR A 316 LI GOOD CONDITION WE HAVE USED LAST 7 YEARS EVERY 1HOURS SERVICED REGULARY GOOD MACHINE NO ANY ISSUES Kdsdpoxfq R Uefx Ah Eet

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Ksdpozz Rpcsfx Ah Ejdt - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.