Used Strunguri Arad Center Lathe for sale (17,275)

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder Nwsdpfju Ix Dcex Ahkek *

Condition: excellent (used), Year of construction: 2011, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rpm 415V, 3 Phase Electrics. Supplied with: Quick Change Tool Post 2 Axis DRO 3 Jaw Chuck 4 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Njdpfx Asx D Uf Tohkswk

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: Nwjdpfx Ahsxn Ty Rsksk 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition!

Condition: used, Year of construction: 2015, functionality: fully functional, JESSEY CHAMPION CP 1540 VS Guide and Lead Screw Lathe Manufacturer: Jessey Type: Champion CP 1540 VS Year of manufacture: 2015 Condition: used Scope of supply: - Coolant system - Machine light - Machine feet - Documentation Njdpfx Aszminuohkewk - Chuck jaws - Digital display - MultiFix B Further information available upon request.

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm bore diameter 130 mm weight of the machine ca. 5,25 t Njdpfxjvdx I Aj Ahkowk required space / m

Condition: used, OKUMA MAC TURN 350-W is a CNC Lathe-Milling Center, engineered for precision, high accuracy and reliability. Capacities: turning Ø 530 mm (over cross-slide), 550 mm (over bed); spindle hole 62 mm; turning length 1625 mm; Z 1670 mm, X 505 mm, Y ±95 mm (190 mm). Specs: 9 axes; C axis 360° res. 0.001°; B axis swivel 210° res. 1°; spindle speeds up to 5000 t/min (main and back spindle); milling cutter speeds 6000 t/min; spindle motor 22/15 kW. Equipment: 44-station tool changer, chip conveyor. Delivers tight tolerances; ideal for automotive, aerospace, medical and precision manufacturing. Nwsdozqbkpspfx Ahkjk

Condition: new, Bernardo Master 400 x 1000 universal lathe, including 3-axis digital display Optional accessories: Multifix steel tool holder, 3 straight inserts, 1 prism insert (672.00 € net, not included in the price) Distance between centers: 1000 mm Swing over bed: 400 mm Nsdpfxogd Iago Ahkowk Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mounting: DIN 55029, D1-5 Speed range: (12) 45 - 2000 rpm Longitudinal feed range: (27) 0.06 - 2.78 mm/rev Cross feed range: (22) 0.01 - 0.72 mm/rev Metric threads: (36) 0.8 - 14 mm Inch threads: (30) 2 - 28 TPI Tailstock diameter: 45 mm Tailstock travel: 100 mm Tailstock mounting: MK 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Weight approx.: 810 kg Scope of delivery: • 3-axis digital display ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, according to DIN 55029 • Fixed steady rest - bore diameter max. 90 mm • Traveling steady rest - bore diameter max. 70 mm • Coolant system • Initial filling with Shell Tellus 46 • Extendable chip tray • Clamping plate 320 mm • Quadruple steel tool holder • Safety device for quadruple steel tool holder • Slip clutch • Micrometer longitudinal stop • Thread dial • LED machine lamp • Reduction sleeve • Change gears • 2 centers • Foot pedal with braking function according to CE • Motor with magnetic brake according to CE standard / operating tool Optional accessories: Multifix steel tool holder, 3 straight inserts, 1 / Factory installation Price: 672.00 € net, not included in the price )

Condition: used, Year of construction: 2015, gebraucht 2015 1686 prompt, Zwischenverkauf v England 14800 € 1 330 mm 1000 mm 167 mm 38 mm 210 mm 12 40 - 2500 1/min 16 0.03 - 1 mm/U 0.2 - 14 mm 2 - 56 TPI Gänge/" 190 mm 92 mm 42 mm 3 MK 110 mm 2.2 kW 1940 mm Nwsdpfx Aowiqv Ishksk 1000 mm 1550 mm 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Z-axis travel (mm): 1970 Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Nwodpfjqwqiaox Ahksk Machine dimensions LxWxH (mm): 3000×1250x1580 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Condition: good (used), Cazeneuve HB500 lathe Njdpozndwajfx Ahkewk

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Nwedpsv Rgzwofx Ahksk Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Nwodou Ixw Aopfx Ahksk The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Year of construction: 1975, condition: ready for operation (used), Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment. Nwedeyzr Hxopfx Ahkjk

Condition: used, Year of construction: 1967, turning diameter over bed 0560 mm turning diameter over slide rest 300 mm turning length 1500 mm Nwodpfx Aew H Di Ashksk spindle bore 65 mm spindle turning speed range 12- 1150 U/min total power requirement 5 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With multifix holder, chuck and turning center.

Condition: used, Year of construction: 1996, functionality: fully functional, Weiler Praktikant 160 AC lathe, manufactured in 1996, with a 3-axis Heidenhain digital display, three-jaw chuck, Multifix system, rear splash guard, electric chuck guard, collet chuck system with a set of collets, and change gears. The machine is in good, operational condition and can be demonstrated under power by arrangement. Nsdpfxezpfw De Ahkjwk

Condition: used, Year of construction: 1966, turning diameter over bed 330 mm turning dia. in gap 400 mm turning length 600 mm centre distance 750 mm spindle turning speed range 20 - 1000 U/min spindle bore 25 mm Nsdpfoxrg Atsx Ahkewk 3-jaw chuck Röhm, Ø 200 mm dimensions of the machine ca. 2000 x 800 x 1500 mm weight of the machine ca. 1200 kg Fixed bezel Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light

Condition: excellent (used), With DRO With step-down gear for spindle speeds Center height150 mm Distance between centers 630 mm Turning diameter over bed 340 mm Spindlespeeds 55-3000 rpm Spindle bore 40 mm Pitch of leading screw 4 mm Tail stock MK5 Misc.accessories MARCELS MASCHINEN CH Nwedpfsy Iz Ixsx Ahksk

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Nwodpfx Ahsw Sdr Hokjk Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest Nwjdpfoy Tmkvjx Ahkek >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck Nodou Ix Hqepfx Ahkswk -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. *

Condition: good (used), 1 x lathe from Hamburg 430 --- 1 x lathe from WEIPERT 425 --- 1 x lathe from VDF Nsdezmm A Njpfx Ahkjwk

Condition: used, Year of construction: 2023, gebraucht 2023 1675 prompt, Zwischenverkauf v Bulgarien 17600 € 1 325 mm 1000 mm 165 mm 32 mm 190 mm 200 mm Nwjdpswirwyofx Ahkjk 5 4,5 MK 12 85 - 2.000 1/min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 75 - 2,5 Gänge/" 0.1 - 1.75 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg demo machine / mint condition net price (price for new machine € 23.970,00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" incl. following optional equipment: 1 lenght stop BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2002, Technical details: turning diameter over bed: 330 mm turning diameter over support: - mm turning length: 3000 mm centre height: 330 mm spindle bore of work spindle: 82 mm range of revolution per miute: 9 - 1600 U/min feed range: 0,028 - 6,43 mm/U tailstock quill adjustment:: 150 mm tailstock taper MT: MK5 total power requirement: 7,84 kW weight of the machine ca.: 2,9 t dimension machine approx.LxWxH: 4,13 x 1,05 x 1,35 m The KNUTH Sinus 333/3000 is a heavy-duty conventional precision lathe designed for universal industrial applications. Key strengths of the machine ·Large distance between centers: 3000 mm ·Suitable for machining: oLong shafts oHydraulic rods oRollers oSpindles oAxles oGeneral mechanical engineering components Equipment Nwsdpfx Aey Rk S Eehksk ·Sony 3-axis digital readout system (Z0 / Z2 / X) Accessories ·Various accessories included, see photos. *

Condition: used, functionality: fully functional, Leadscrew and feed shaft lathe Manufacturer: Heidenreich & Harbeck, Type VDF V3 Technical Data Brand: Heidenreich & Harbeck Type: VDF V3 Year of manufacture: unknown Control: conventional Centre distance: 1000 mm Nwedpfx Ahsy Iyzqjkjk Swing diameter over bed: 520 mm Spindle bore: 63 mm Dimensions: L 3.40 x W 1.10 x H 1.40 m Machine weight: approx. 3.5 t Equipment - 4-jaw chuck Röhm, diameter 250 mm All information provided without guarantee. A power-on demonstration is possible at any time in our showroom.

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Njdpfx Ahjzf Nd Hekewk Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Total power: 6.6 kVA Machine weight: 1760 kg